Search NASA⌕ Search

SEARCH · Search NASA

Results for “cathode engineering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Dendrite-Free Flexible Fiber-Shaped Zn Battery with Long Cycle Life in Water and Air

Fiber-shaped aqueous rechargeable Zn batteries (FARZBs) show flexibility, good reliability, cost-effectiveness, high energy/power densities, and high safety that have attracted increasing attention as promising energy storage devices for future wearable applications. However, the development of FARZB is limited by its poor cycling life and inferior charge-discharge performance, mainly suffering from zinc dendrite growth and increasing electrode irreversibility. In this work, dendrite-free fiber-shaped Zn//Co 3 O 4 rechargeable batteries with a long cycle life tested in water and air, are obtained via tuning the surface binding energy of Zn on the anode using the zincophilic N,O-functional carbon fiber, as well as engineering the Co 3 O 4 cathode with a nanowire array structure. The fiber-shaped Zn//Co 3 O 4 full battery demonstrates remarkable long cycle life in water and air with high energy density, impressive flexibility, and excellent waterproof ability (fully immersed and charged/discharged under water for more than 33 h for 3000 cycles with capacity retention of ≈80%). The reversible electrochemical mechanisms of the FARZBs, without obvious zinc dendrite deposits and structural change of Co 3 O 4 nanowires, are confirmed by a series of characterizations. Furthermore, these results demonstrate that the FARZBs are promising power sources for emerging wearable electronics.

25 ENERGY STORAGE↗

Surface Modification of Nickel-Rich Cathode Materials by Ionically Conductive Materials at Room Temperature

Nickel-rich cathode materials (LiNi x Mn y Co 1-x-y O 2 , NMC) are promising to push the limits of lithium-ion batteries to higher energy density. This approach is favored in practical applications including electric vehicles and aviation transportation. However, the instability of the NMC at charged state results in safety concerns and poor cycling stability. Surface coating is a practical and effective strategy to address this. Cubic Li7La3Zr2O12 (LLZO) is an ideal coating material regarding the low electron transfer rate and high Li+ conductivity. Thus, a LLZO coating layer can suppress the parasitic reactions in the electrode/electrolyte interface without deteriorating the lithium migration. However, high-temperature calcination seems to inevitably create the chemical couplings between NMC and LLZO, leading to the interdiffusion and degradation of NMC and LLZO crystal structures. This work presents a simple mechanochemical method to effectively coat LLZO on the NMC particle surface. Furthermore, the coated cathode demonstrates superior electrochemical performance compared with the pristine NMC cathode.

25 ENERGY STORAGE↗

Chemical preintercalation of magnesium ions into ⍺-MoO 3 structure for improved electrochemical stability in Li-ion cells

Chemical preintercalation of layered materials, used as electrodes in intercalation-based energy storage devices, represents a promising strategy to enhance electrochemical stability and extend cycle life. However, standardized synthesis approaches for the chemical preintercalation of diverse ions into various layered materials are lacking, necessitating the development of specific synthesis routes for each ion and layered phase combination. In this study, we present the first successful demonstration of Mg 2+ ion chemical preintercalation into the interlayer region of α-MoO 3 , revealing its stabilizing effect during cycling in non-aqueous Li-ion cells. Using ethanol during hydrothermal treatment facilitated molybdenum reduction, which was critical for Mg 2+ ion preintercalation. Interestingly, we found that Mg preintercalation was accompanied by the incorporation of water. Mg-preintercalated α-MoO 3 exhibited enhanced charge storage capacity, electrochemical stability, and power capability compared to pristine α-MoO 3 electrodes. This improved performance is attributed to the structural stabilization provided by Mg 2+ pillars, which prevent undesirable phase transformations during repeated Li intercalation/deintercalation, and increased Li + ion diffusion due to the shielding of electrostatic interactions between electrochemically cycled ions and the α-MoO 3 lattice, enabled by structural water. In conclusion, our study offers new insights into developing chemical preintercalation synthesis approaches that can be broadly applied to a wide range of pillaring ions and layered material hosts.

25 ENERGY STORAGE↗

Examination of the mechanism for the reversible aging behavior at open circuit when changing the operating temperature of (La 0.8 Sr 0.2 ) 0.95 MnO 3 electrodes

The aging behavior of symmetrical cells, consisting of either (La 0.8 Sr 0.2 ) 0.95 MnO 3 (LSM) or La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3 (LSCF) electrodes screen printed on either 8 mol% yttria-stabilized zirconia (YSZ) or Ce 0.8 Gd 0.2 O 2 (GDC) electrolyte substrates, is reported as the symmetrical cell is thermally cycled between 700 °C and 800 °C. For LSM, between 700 °C and 850 °C, the polarization resistance exhibits slow increases or decreases with time (on the order of days) after a quick change in temperature. When increasing the temperature, the polarization resistance decreases with time, and when decreasing the temperature, the polarization resistance slowly increases with time. In a previous work, the authors had explained these results with LSM by connecting the testing conditions to literature reports of surface analysis of LSM thin films which demonstrated a change in the amount of surface cation segregation as a function of temperature. In this work, TEM/EDS/XPS analysis of dense LSM pellets thermally cycled under the same conditions as the symmetrical cells does not indicate any significant reversible change in the surface composition of the LSM pellet between 700 °C and 800 °C. An alternative hypothesis is proposed to explain the relationship between polarization resistance and the LSM cation/anion vacancy concentrations controlled by the Schottky reaction. The timescale of aging behavior is related to the time necessary for the cations to move to or from the LSM surface to adjust to the new equilibrium at each temperature. Furthermore, the relevance in understanding the mechanism behind the aging behavior is emphasized with respect to fuel cell sample/stack modeling as well as to proper testing procedures for reaching reliable conclusions when comparing different electrode samples.

42 ENGINEERING↗

The Interaction between Cu and Fe in P2-Type Na x TMO 2 Cathodes for Advanced Battery Performance

Recently, Cu element has been introduced into layered sodium transition metal oxides (NaxTMO2) as cathode materials for sodium ion batteries to engineer rate and cycling performance. To study the unique role provided by Cu, we designed, synthesized and tested four different compositions of P2-type Nax(MnyFezCo1-y-z)O2 and three compositions of P2-type Nax(MnyFezCu1-y-z)O2 cathode materials. When cycled in the full voltage range of 1.5~4.5 V under different rates 0.1 C, 1 C and 10 C, the cyclability of MnFeCu-based compounds is better than that of MnFeCo-based ones. Using X-ray diffraction, we observed the P2 to O2-like phase transition of MnFeCu-based materials upon charging and studied its influence on battery performance. Limiting the P2-O2 phase transition delivers less capacity, but improves cyclability. By DFT simulations, we showed that different Na diffusivity and site preference in the high voltage phase contribute to the difference in the electrochemical performances of these cathode materials.

25 ENERGY STORAGE↗

Unravelling the impact of reaction paths on mechanical degradation of intercalation cathodes for lithium-ion batteries

The intercalation compounds are generally considered as ideal electrode materials for lithium-ion batteries thanks to their minimum volume expansion and fast lithium ion diffusion. However, cracking still occurs in those compounds and has been identified as one of the critical issues responsible for their capacity decay and short cycle life, although the diffusion-induced stress and volume expansion are much smaller than those in alloying-type electrodes. Here, we designed a thin-film model system that enables us to tailor the cation ordering in LiNi 0.5 Mn 1.5 O 4 spinels and correlate the stress patterns, phase evolution, and cycle performances. Surprisingly, we found that distinct reaction paths cause negligible difference in the overall stress patterns but significantly different cracking behaviors and cycling performances: 95% capacity retention for disordered LiNi 0.5 Mn 1.5 O 4 and 48% capacity retention for ordered LiNi 0.5 Mn 1.5 O 4 after 2000 cycles. We were able to pinpoint that the extended solid-solution region with suppressed phase transformation attributed to the superior electrochemical performance of disordered spinel. Furthermore, this work envisions a strategy for rationally designing stable cathodes for lithium-ion batteries through engineering the atomic structure that extends the solid-solution region and suppresses phase transformation.

25 ENERGY STORAGE↗

Engineering the Transformation Strain in LiMn y Fe 1– y PO 4 Olivines for Ultrahigh Rate Battery Cathodes

Alkali ion intercalation compounds used as battery electrodes often exhibit first-order phase transitions during electro-chemical cycling, accompanied by significant transformation strains. Despite 30 years of research into the behavior of such compounds, the relationship between transformation strain and electrode performance, especially the rate at which working ions (e.g., Li) can be intercalated and deintercalated, is still absent. In this work, we use the LiMn y Fe 1-y PO 4 system for a systematic study, and measure using operando synchrotron radiation powder X-ray diffraction (SR-PXD) the dynamic strain behavior as a function of the Mn content (y) in powders of similar to 50 nm average diameter. The dynamically produced strain deviates significantly from what is expected from the equilibrium phase diagrams and demonstrates metastability but nonetheless spans a wide range from 0 to 8 vol % with y. For the first time, we show that the discharge capacity at high C-rates (20-50C rate) varies in inverse proportion to the transformation strain, implying that engineering electrode materials for reduced strain can be used to maximize the power capability of batteries.

cathode↗

MATERIALS AND INTERFACIAL ENGINEERING FOR HIGH- PERFORMANCE ALL-SOLID-STATE BATTERIES

Developing advanced energy storage systems may address the increasing concerns of energy shortage and environmental issues. Among many energy storage technologies, electrochemical energy storage systems such as lithium-ion batteries have been widely used in various applications. However, current lithium-ion batteries using flammable liquid electrolytes may cause a safety risk. All-solid-state sodium batteries (ASSSBs) have been attracting considerable attention as safe and low-cost alternatives to Li-ion batteries. However, the performance of ASSSBs falls short of the requirements for commercial applications mainly due to the challenges at the electrode-solid electrolyte interface. The goal of this dissertation is to develop new materials and interfacial engineering methods for high-performance ASSSBs with favorable electrode-electrolyte interfaces. In this dissertation, I demonstrate three effective strategies to address the interfacial challenges, namely through the use of organic cathode materials, new solid electrolyte development, and interfacial engineering.

Hao, Fang↗

Developing cathode infiltration processes for all-solid-state bilayer LLZO cells

To realize the bilayer architecture of lithium lanthanum zirconate (LLZO) for application in solid-state batteries (SSBs), the scaffold structure must be optimized, and effective cathode infiltration strategies must be established. In this study, we fabricate a modified bilayer LLZO using a sacrificial layer to enhance surface porosity, and systematically investigate various cathode infiltration techniques to fill the scaffold with oxide cathode active materials (CAM). Structural characterizations showed that the sacrificial layer significantly increased open surface porosity, enabling the surface of the scaffold to be filled with CAM. To further increase infiltration depth, applying vacuum or vibration was compared, with the full-depth infiltration achieved using a sonicator-based vibration. Full cells prepared using the modified bilayer LLZO and vibration-assisted technique demonstrated successful operation. This work demonstrates a practical and scalable approach for engineering bilayer LLZO structures and integrating oxide cathodes into porous scaffolds, offering a promising pathway toward high-performance solid-state batteries.

Bilayer↗

Identifying Active Sites for Parasitic Reactions at the Cathode–Electrolyte Interface

Nickel-rich transition metal oxides are the most enticing high voltage and high capacity cathode materials for high energy density lithium batteries. Improving the chemical/electrochemical stability of the cathode electrolyte interface has been the major technical focus to enable this class of cathode materials. Here, LiCoO 2 is adopted as the model cathode material to investigate the active sites for parasitic reactions between the delithiated cathode and the non-aqueous electrolyte. Both ab initio calculations and experimental results clearly show that the partially coordinated transition metal atoms at the surface is responsible for the parasitic reactions at the cathode electrolyte interface. This discovery lays out a fundamental support for rational interfacial engineering to further improve the life and safety characteristics of nickel-rich cathode materials.

25 ENERGY STORAGE↗

Phosphorus Enrichment as a New Composition in the Solid Electrolyte Interphase of High-Voltage Cathodes and Its Effects on Battery Cycling

Immersion of a solid into liquid often leads to the modification of both the structure and chemistry of surface of the solid, which subsequently affects the chemical and physical properties of the system. For the case of the rechargeable lithium ion battery, such a surface modification is termed as solid electrolyte interphase (SEI) layer, which has been perceived to play critical role for the stable operation of the batteries. However, the structure and chemical composition of SEI layer and its spatial distribution and dependence on the battery operating condition remain unclear. By using aberration corrected scanning transmission electron microscopy coupled with ultra-high sensitive energy dispersive x-ray spectroscopy, we probed the structure and chemistry of SEI layer on several high voltage cathodes. We show that layer-structured cathodes, when cycled at a high cut off voltage, can form a P-rich SEI layer on their surface, which is a direct evidence of Li-salt (LiPF6) decomposition. Our systematical investigations indicate such cathode/Li-salt side reaction shows strong dependence on structure of the cathode materials, operating voltage and temperature, indicating the feasibility of SEI engineering. These findings provide us valuable insights into the complex interface between the high-voltage cathode and the electrolyte.

Environmental Molecular Sciences Laboratory↗

Fluidized Bed Production of Surface Functionalized Powders for Solid Oxide Fuel Cell Cathodes

Fuel cells offer tremendous potential for highly efficient conversion of fossil fuels to useable electrical power. Solid oxide fuel cells (SOFC) are particularly attractive, due to their high efficiency and capability to utilize either hydrogen or hydrocarbon fuels. Presently, there is considerable incentive to develop medium temperature (600 C to 800 C) SOFC's, in order to reduce the material compatibility issues and the engineering challenges associated with higher operating temperatures. Developing cathode materials with viable performance at intermediate temperatures is presently one of the key challenges in commercialization of solid oxide fuel cells. Recent works have shown the advantages of using surface functionalized cathode materials to improve SOFC performance at intermediate temperatures. However, present techniques for surface functionalization are expensive and difficult to implement in commercial SOFC production. In this SBIR Program, Structured Materials Industries, Inc. (SMI), along with partners FuelCell Energy, Inc. (FCE) and the University of Connecticut (UConn), demonstrated a simple and economical process to produce surface functionalized cathode materials, based on fluidized bed technology. SMI has developed a variation on this technology, known as Fluidized Bed Chemical Vapor Deposition (FBCVD), and is presently implementing and commercializing FBCVD as an economical and scalable process to deposit coatings on powder materials. In Phase I of this Project, the SBIR team demonstrated technical feasibility of this approach for producing high performance SOFC cathode materials. In this Phase II Project, the SBIR team refined and optimized the FBCVD process and the surface functionalized cathode materials. Surface functionalized powders of various composition and morphology were produced at SMI using the FBCVD process. Electrochemical characterization of the powders was done at FCE under actual SOFC operating conditions. The results demonstrated the potential for significant improvement in SOFC performance. Long term testing at FCE showed the performance enhancement to be stable with time. Advanced materials characterization at UConn identified the composition and morphology of the materials. SMI's FBCVD processed materials represent a "drop in" replacement for present cathode materials, and should have minimal impact on SOFC production costs. SMI has designed a scaled up FBCVD system for high volume production of SOFC cathode materials, and is well positioned for future implementation and commercialization of the technology developed in this SBIR.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Engineering Design and Fabrication of an Ampere-Class Superconducting Photocathode Electron Gun

Over the past three years, Advanced Energy Systems and Brookhaven National Laboratory (BNL) have been collaborating on the design of an Ampere- class superconducting photocathode electron gun. BNL performed the physics design of the overall system and RF cavity under prior programs. Advanced Energy Systems (AES) is currently responsible for the engineering design and fabrication of the electron gun under contract to BNL. We will report on the engineering design and fabrication status of the superconducting photocathode electron gun. The overall configuration of the cryomodule will be reviewed. The layout of the hermitic string, space frame, shielding package, and cold mass will be discussed. The engineering design of the gun cavity and removable cathode will be presented in detail and areas of technical risk will be highlighted. Finally, the fabrication sequence and fabrication status of the gun cavity will be discussed.

42 ENGINEERING↗

Nanovoid Incorporated IrxCu Metallic Aerogels for Oxygen Evolution Reaction Catalysis

Ir-based nanomaterials are regarded as state-of-the-art cathode electrocatalysts in proton exchange membrane water electrolyzers (PEMWEs). Engineering the morphology of Ir-based three-dimensional architectures as electrocatalysts toward oxygen evolution reaction (OER) has been rarely studied. Here, we report the gelation of IrxCu metallic hydrogels self-assembled with ultrafine and nanovoid incorporated building blocks for enhancing the electrocatalytic performance toward OER. The composition-optimized Ir3Cu metallic aerogels exhibited improved catalytic activity and durability toward OER. The mesosized voids generated through the in situ galvanic replacement reaction and the macrosized porous systems make a great contribution to the increased number of active sites. First-principle calculations revealed the intrinsic optimized binding energy of Ir by alloying with Cu. The best catalytic performance necessities a balance of the adsorption and desorption energy. The well-defined morphology and enhanced OER electrochemical performances of nanovoid incorporated IrxCu metallic aerogels hold great promise in further applications in PEMWEs.

Shi, Qiurong↗

Unraveling the Stable Cathode Electrolyte Interface in all Solid‐State Thin‐Film Battery Operating at 5 V

Abstract Spinel‐type LiNi 0.5 Mn 1.5 O 4 (LNMO) is one of the most promising 5 V‐class cathode materials for Li‐ion batteries that can achieve high energy density and low production costs. However, in liquid electrolyte cells, the high voltage causes continuous cell degradation through the oxidative decomposition of carbonate‐based liquid electrolytes. In contrast, some solid‐state electrolytes have a wide electrochemical stability range and can withstand the required oxidative potential. In this work, a thin‐film battery consisting of an LNMO cathode with a solid lithium phosphorus oxynitride (LiPON) electrolyte is tested and their interface before and after cycling is characterized. With Li metal as the anode, this system can deliver stable performance for 600 cycles with an average Coulombic efficiency >99%. Neutron depth profiling indicates a slight overlithiated layer at the interface prior to cycling, a result that is consistent with the excess charge capacity measured during the first cycle. Cryogenic electron microscopy further reveals intimate contact between LNMO and LiPON without noticeable structure and chemical composition evolution after extended cycling, demonstrating the superior stability of LiPON against a high voltage cathode. Consequently, design guidelines are proposed for interface engineering that can accelerate the commercialization of a high voltage cell with solid or liquid electrolytes.

25 ENERGY STORAGE↗

Stable Cycling with Intimate Contacts Enabled by Crystallinity–Controlled PTFE–Based Solvent–Free Cathodes in All–Solid–State Batteries

All-solid-state batteries (ASSBs) employing Li-metal anodes and inorganic solid electrolytes are attracting great attention due to high safety and energy density for next-generation energy storage devices. However, the volume change of cathode active materials can cause contact loss, resulting in charge carrier isolation, heterogeneous current distribution, and poor electrochemical properties in ASSBs. Here, a simple, yet effective, solvent-free electrode engineering approach with polytetrafluoroethylene (PTFE) as a binder for ASSBs is reported, enabling intimate contact and stable interfaces with the cathode. It is substantiated that the crystallinity of PTFE can be controlled depending on the heat history, and highly crystalline PTFE displays robust mechanical properties. High-nickel LiNi 0.8 Mn 0.1 Co 0.1 O 2 cathode prepared with crystalline PTFE show improved cycle and rate performances in ASSBs. In addition, it is revealed that the intimate contact between cathode particles with a stable cathode electrolyte layer is maintained during cycling by postmortem studies. Furthermore, this simple engineering method can be applied to prepare cathodes with a variety of active materials and solid electrolytes in ASSBs.

25 ENERGY STORAGE↗

Benchmarking Solid-State Batteries Containing Sulfide Separators: Effects of Electrode Composition and Stack Pressure

Integrating sulfide separators into solid-state batteries (SSBs) containing high energy cathodes typically requires one or more materials and engineering solutions including: (i) applying interfacial coatings to mitigate electrolyte decomposition, (ii) applying high stack pressures to form robust solid-solid contacts, and (iii) using alloying anodes to avoid Li dendrite formation. Despite the promise of these approaches, a lack of standardized testing protocols makes it difficult to directly compare results among different studies. To address this problem, the present work benchmarks the performance of SSBs containing β-Li 3 PS 4 (LPS) separators and composite cathodes. By systematically varying the anode/cathode composition and stack pressure, this work demonstrates that cathode design is a major bottleneck for solid-state cells cycled at low rates (<100 µA cm -2 ). Operando stack pressure measurements show that, while mechanical confinement generally promotes higher active material utilization and cycling stability, this strategy alone does not address interfacial reactivity between LPS and high voltage cathodes. Here, these results also demonstrate that stress evolution during cycling is dominated by volume changes at the Li metal anode. Finally, we show that FeS 2 cathodes with moderate operating voltages (<3 V vs Li/Li + ) exhibit superior cycling performance compared to high voltage cathodes by facilitating formation of stable cathode/electrolyte interfaces.

25 ENERGY STORAGE↗