Search NASA⌕ Search

SEARCH · Search NASA

Results for “cell parameters”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Effect of solvothermal synthesis parameters on the crystallite size and atomic structure of cobalt iron oxide nanoparticles

We here investigate how the synthesis method affects the crystallite size and atomic structure of cobalt iron oxide nanoparticles. By using a simple solvothermal method, we first synthesized cobalt ferrite nanoparticles of ca. 2 and 7 nm, characterized by Transmission Electron Microscopy (TEM), Small Angle X-ray scattering (SAXS), X-ray and neutron total scattering. The smallest particle size corresponds to only a few spinel unit cells. Nevertheless, Pair Distribution Function (PDF) analysis of X-ray and neutron total scattering data shows that the atomic structure, even in the smallest nanoparticles, is well described by the spinel structure, although with significant disorder and a contraction of the unit cell parameter. These effects can be explained by the surface oxidation of the small nanoparticles, which is confirmed by X-ray near edge absorption spectroscopy (XANES). Neutron total scattering data and PDF analysis reveal a higher degree of inversion in the spinel structure of the smallest nanoparticles. Neutron total scattering data also allow magnetic PDF (mPDF) analysis, which shows that the ferrimagnetic domains correspond to ca. 80% of the crystallite size in the larger particles. A similar but less well-defined magnetic ordering was observed for the smallest nanoparticles. Finally, we used a co-precipitation synthesis method at room temperature to synthesize ferrite nanoparticles similar in size to the smallest crystallites synthesized by the solvothermal method. Structural analysis with PDF demonstrates that the ferrite nanoparticles synthesized via this method exhibit a significantly more defective structure compared to those synthesized via a solvothermal method.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2023

Numerical investigation of gas-filled multipass cells in the enhanced dispersion regime for clean spectral broadening and pulse compression

We show via numerical simulations that the regime of enhanced frequency chirp can be achieved in gas-filled multipass cells. Our results demonstrate that there exists a region of pulse and cell parameters for which a broad and flat spectrum with a smooth parabolic-like phase can be generated. This spectrum is compatible with clean ultrashort pulses, whose secondary structures are always below the 0.5% of its peak intensity such that the energy ratio (the energy contained within the main peak of the pulse) is above 98%. This regime makes multipass cell post-compression one of the most versatile schemes to sculpt a clean intense ultrashort optical pulse.

Segundo Staels, V. W. (ORCID:0000000200056157)↗
DOE OSTI2022

Impact of battery cell imbalance on electric vehicle range

Due to manufacturing variation, battery cells often possess heterogeneous characteristics, leading to battery state-of-charge variation in real-time. Since the lowest cell state-of-charge determines the useful life of battery pack, such variation can negatively impact the battery performance and electric vehicles range. Existing research has been focused on control design to mitigate cell imbalance. However, it is yet unclear how much impacts the cell imbalance can have on electric vehicle range. This paper closes this knowledge gap by using a simulation environment consisting of real-world driving speed data, vehicle longitudinal control, propulsion and vehicle dynamics, and cell level battery modeling. In particular, each battery cell is modeled as an equivalent circuit model, and variations among cell parameters are introduced to assess their impact on electric vehicles range and to identify the most influential parameter variations. Simulation results and analysis can be used to assist balancing control design and to benchmark control performance.

25 ENERGY STORAGE↗
DOE OSTI2020

Using Complementary Methods of Synchrotron Radiation Powder Diffraction and Pair Distribution Function to Refine Crystal Structures with High Quality Parameters—A Review

Determination of the atomic-scale structures of certain fine-grained minerals using single-crystal X-ray diffraction (XRD) has been challenging because they commonly occur as submicron and nanocrystals in the geological environment. Synchrotron powder diffraction and scattering techniques are useful complementary methods for studying this type of minerals. In this review, we discussed three example studies investigated by combined methods of synchrotron radiation XRD and pair distribution function (PDF) techniques: (1) low-temperature cristobalite; (2) kaolinite; and (3) vernadite. Powder XRD is useful to determine the average structure including unit-cell parameters, fractional atomic coordinates, occupancies and isotropic atomic displacement parameters. X-ray/Neutron PDF methods are sensitive to study the local structure with anisotropic atomic displacement parameters (ADP). The results and case studies suggest that the crystal structure and high-quality ADP values can be obtained using the combined methods. The method can be useful to characterize crystals and minerals that are not suitable for single-crystal XRD.

58 GEOSCIENCES↗
DOE OSTI2024

High-throughput determination of Hubbard $U$ and Hund $J$ values for transition metal oxides via the linear response formalism

DFT+U provides a convenient, cost-effective correction for the self-interaction error (SIE) that arises when describing correlated electronic states using conventional approximate density functional theory (DFT). The success of a DFT+U(+J) calculation hinges on the accurate determination of its Hubbard U and Hund J parameters, and the linear response (LR) methodology has proven to be computationally effective and accurate for calculating these parameters. This study provides a high-throughput computational analysis of the U and J values for transition metal d-electron states in a representative set of over 1000 magnetic transition metal oxides (TMOs), providing a frame of reference for researchers who use DFT+U to study transition metal oxides. In order to perform this high-throughput study, an ATOMATE workflow is developed for calculating U and J values automatically on massively parallel supercomputing architectures. Here, to demonstrate an application of this workflow, the spin-canting magnetic structure and unit cell parameters of the multiferroic olivine LiNiPO4 are calculated using the computed Hubbard U and Hund J values for Ni-d and O-p states, and are compared with experiment. Both the Ni-d U and J corrections have a strong effect on the Ni-moment canting angle. Additionally, including a O-pU value results in a significantly improved agreement between the computed lattice parameters and experiment

36 MATERIALS SCIENCE↗
DOE OSTI2022

The crystal structure of Fe2S at 90 GPa based on single-crystal X-ray diffraction techniques

The Fe-S system was explored in a laser-heated diamond-anvil cell at 89(2) GPa and 2380(120) K to better understand the phase stability of Fe 2 S. Upon temperature quenching, crystallites of Fe 2 S were identified, and their structure was investigated using single-crystal X-ray diffraction techniques. At these conditions, Fe 2 S adopts the C23 structure (anti-PbCl 2 , Co 2 P) with space group Pnma (Z = 4). This structure consists of columns of corner-sharing, FeS 4 tetrahedra, and columns of edge-sharing FeS 5 square pyramids linked along edges in the b direction. Sulfur is in ninefold coordination with Fe. This work marks the first high-pressure structural solution and refinement of Fe 2 S synthesized in a multigrain Fe+FeS sample at 90 GPa and 2400 K and establishes the stability of C23 Fe 2 S at these conditions. A previous powder diffraction study reports an orthorhombic Fe 2 S phase with a C37, Co 2 Si-like unit cell above 190 GPa. A C23–C37 structural transition is inferred to explain the previously observed unit-cell parameters at higher pressures and temperatures. These results highlight the utility of applying single-crystal X-ray diffraction techniques to high P-T multigrain samples to explore the structural properties of iron-rich phases in Earth and planetary cores.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Density-Functional Tight-Binding Parameters for Bulk Zirconium: A Case Study for Repulsive Potentials

Density-functional tight-binding (DFTB) parameters are presented for the simulation of the bulk phases of zirconium. Electronic parameters were obtained using a band structure fitting strategy, while two-center repulsive potentials were created by particle swarm optimization. As objective functions for the repulsive potential fitting, we employed the Birch–Murnaghan equations of state for hexagonal close-packed (HCP), body-centered cubic (BCC) and ω phases of Zr from density-functional theory (DFT). When fractional atomic coordinates are not allowed to change in the generation of the equation-of-state curves, long-range repulsive DFTB potentials are able to almost perfectly reproduce equilibrium structures, relative DFT energies of the bulk phases, and bulk moduli. However, the same potentials lead to artifacts in the DFTB potential energy surfaces when atom positions in the unit cell are allowed to fully relax during the change of unit cell parameters. Finally, conventional short-range repulsive DFTB potentials, while inferior in their ability to reproduce DFT bulk energetics, are able to correctly reproduce the qualitative shape of the DFT potential energy surfaces, including the location of global minima, and can therefore be considered more transferable.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Response of ZrC to swift heavy ion irradiation

Zirconium carbide (ZrC) is commonly used for energy sector research, as well as a surrogate for the proposed advanced nuclear fuel candidate uranium carbide. Here this study investigates structural modifications to nanocrystalline and microcrystalline ZrC resulting from dense electronic excitations induced by swift heavy ion exposure. Samples were irradiated with 946 MeV Au ions to various fluences up to 6 × 10 13 ions cm –2 and characterized using synchrotron-based x-ray diffraction. The evolution of the unit-cell parameter and heterogeneous microstrain were evaluated as a function of fluence and compared with those of nanocrystalline and microcrystalline CeO 2 (a surrogate for UO 2 fuel) irradiated under identical conditions. Distinct differences were observed in the radiation responses of the carbide and oxide across both grain sizes. Most notably, microcrystalline ZrC exhibits swelling characterized by two distinct regimes, which does not result in saturation at the ion fluences achieved. This contrasts with CeO 2 , which exhibits the well-documented direct-impact defect accumulation mechanism, reaching a steady-state saturation of swelling at higher fluences. Nanocrystalline CeO 2 undergoes more pronounced swelling compared with microcrystalline CeO 2 , in contrast to nanocrystalline ZrC, which exhibits only minimal unit-cell changes. These results demonstrate that swift heavy ion-induced structural changes can be quite different in carbides and oxides, which must be considered when extrapolating fission-fragment type damage in current fuels to advanced fuels.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

A simple technique to classify diffraction data from dynamic proteins according to individual polymorphs

One often observes small but measurable differences in the diffraction data measured from different crystals of a single protein. These differences might reflect structural differences in the protein and may reveal the natural dynamism of the molecule in solution. Partitioning these mixed-state data into single-state clusters is a critical step that could extract information about the dynamic behavior of proteins from hundreds or thousands of single-crystal data sets. Mixed-state data can be obtained deliberately (through intentional perturbation) or inadvertently (while attempting to measure highly redundant single-crystal data). To the extent that different states adopt different molecular structures, one expects to observe differences in the crystals; each of the polystates will create a polymorph of the crystals. After mixed-state diffraction data have been measured, deliberately or inadvertently, the challenge is to sort the data into clusters that may represent relevant biological polystates. Here, this problem is addressed using a simple multi-factor clustering approach that classifies each data set using independent observables, thereby assigning each data set to the correct location in conformational space. This procedure is illustrated using two independent observables, unit-cell parameters and intensities, to cluster mixed-state data from chymotrypsinogen (ChTg) crystals. It is observed that the data populate an arc of the reaction trajectory as ChTg is converted into chymotrypsin.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Enabling Structure/Interface Regulation for High Performance Ni-Rich Cathodes

Here, further commercialization of Ni-rich layered cathodes is hindered by severe structure/interface degradation and kinetic hindrance that occur during electrochemical operation, which leads to safety risks and reduced range in electric vehicles (EVs). Herein, by selecting elements with different solubility properties, a multifunctional strategy that synchronously fabricates perovskite-type SrZrO 3 coating and Sr/Zr co-doping is employed to strengthen the structure/interface stability and the Li + transport mobility of LiNi 0.85 Co 0.10 Mn 0.05 O 2 (NCM). Perovskite-type SrZrO 3 protective layers formed on the particle surface can substantially mitigate the unexpected interfacial side reactions and surface phase transitions. In addition, a robust crystal framework is constructed by optimizing local O coordination through the introduction of strong Zr-O bonds. Notably, Li + diffusion kinetics is effectively improved due to expanded cell parameters and O-Li-O slab spacing with the incorporation of large-diameter Sr pillar ions, as revealed by X-ray diffraction. As a result, the Sr/Zr-modified NCM achieves a remarkable capacity retention of 99.4% after 200 cycles at 1 C, and a high rate capacity of 168.9 mAh g -1 at 10 C. This work opens new avenues to develop high-performance NCM cathodes with high energy and high power for EVs with long calendar life.

25 ENERGY STORAGE↗
DOE OSTI2024

Enhanced Hydrogen Evolution Catalysis of Pentlandite due to the Increases in Coordination Number and Sulfur Vacancy during Cubic‐Hexagonal Phase Transition

Abstract The search for new phases is an important direction in materials science. The phase transition of sulfides results in significant changes in catalytic performance, such as MoS 2 and WS 2 . Cubic pentlandite [cPn, (Fe, Ni) 9 S 8 ] can be a functional material in batteries, solar cells, and catalytic fields. However, no report about the material properties of other phases of pentlandite exists. In this study, the unit‐cell parameters of a new phase of pentlandite, sulfur‐vacancy enriched hexagonal pentlandite (hPn), and the phase boundary between cPn and hPn are determined for the first time. Compared to cPn, the hPn shows a high coordination number, more sulfur vacancies, and high conductivity, which result in significantly higher hydrogen evolution performance of hPn than that of cPn and make the non‐nano rock catalyst hPn superior to other most known nanosulfide catalysts. The increase of sulfur vacancies during phase transition provides a new approach to designing functional materials.

Chemistry↗
DOE OSTI2020

Synthesis, Crystal and Electronic Structure of Layered AM Sb Compounds ( A = Rb, Cs; M = Zn, Cd): Synthesis, Crystal and Electronic Structure of Layered AM Sb Compounds ( A = Rb, Cs; M = Zn, Cd)

Synthesis, crystal structure, thermal stability, and electronic band structure of four new metal antimonides AMSb (A = Rb, Cs; M = Zn, Cd) are reported. CsZnSb and RbZnSb crystallize in the hexagonal ZrBeSi structure type, in a P6 3 /mmc space group (no. 194, Z = 2) and unit cell dimensions of a = 4.5588(2)/4.5466(4) Å and c = 11.9246(6)/11.0999(10) Å. CsCdSb and RbCdSb crystallize in the tetragonal PbFCl structure type in a P4/nmm space group (no. 129; Z = 2) and unit cell parameters of a = 4.8884(5)/4.8227(3) Å and c = 8.8897(9)/8.5492(7) Å. All four compounds are air- and water-sensitive and are shown through DSC measurements to decompose between 975 K and 1060 K. Analysis of the calculated electronic band structure shows that the Zn-containing antimonides are topologically trivial narrow bandgap semiconductors, whereas Cd-containing compounds exhibit a band inversion along Γ-Z direction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Dataset of mechanically induced thermal runaway measurement and severity level on Li-ion batteries

The deployment of Li-ion batteries covers a wide range of energy storage applications, from mobile phones, e-bikes, electric vehicles (EV) and stationary energy storage systems. However, safety issue such as thermal runaway is always one of the most important concerns to prevent Li-ion batteries from further market penetration. A standardized single-side indentation test protocol was developed to mechanically induce an internal short-circuit. The cell voltage, compressive load, indenter stroke, and temperature at the indentation point are measured in time series. The test data of each cell, along with cell parameters such as dimensions, mass, chemistry, state of charge (SOC), capacity, are integrated together to calculate a thermal runaway severity score from 0 to100. Complete data collection process including the original measured record, test method, severity score calculation scheme is presented in this article. The thermal runaway severity analysis and the more than 100 tested Li-ion battery records provide a good data source for further comparison and ranking of thermal runaway risks.

25 ENERGY STORAGE↗
DOE OSTI2022

Energetics of hydroxylbastnäsite solid solutions, La 1-$\chi$ Nd $\chi$ CO 3 OH

Bastnäsites (LnCO 3 (F,OH)) are a group of common rare earth elements (REE)-bearing minerals and are one of the primary global sources of REE. Due to the chemical similarities among REE, bastnӓsites tend to occur as solid solutions instead of end members in REE containing ores. To better understand the processes and the mechanisms of formation of such deposits, it is essential to determine the thermodynamic properties of bastnӓsites, including hydroxylbastnӓsite (LnCO 3 OH) solid solutions. In this work, we performed detailed structural and calorimetric investigations on synthetic hexagonal La–Nd hydroxylbastnӓsite (La 1-$\chi$ NdCO 3 OH, $\chi$ = 0, 0.25, 0.5, 0.75, 1) solid solutions. X-ray diffraction confirms the crystal structure of the solid solution series in the $\ P$6 space group, and pair distribution function (PDF) analysis reveals local bonding environments characterized by three different types of 9-coordinated metal-oxygen polyhedra. Unit cell parameters of La1–xNdxCO3OH exhibit a nearly linear relation with the Nd content x, suggesting a random distribution of La and Nd in the structure. Their standard enthalpies of formation (Δ$\ H$° f ) were determined by high temperature oxide melt drop solution calorimetry, from which the enthalpies of mixing (Δ$\ H$ mix ) were derived. The Δ$\ H$ mix can be fitted by a regular solution model with an interaction parameter of 12.58 ± 0.16 kJ/mol, suggesting enthalpic metastability of La1–xNdxCO3OH relative to the two endmembers. Combining entropy and enthalpy, we further estimated the Gibbs free energies of mixing (Δ$\ G$ mix ) at relevant temperatures, revealing favorable temperatures under which the intermediate La 1-$\chi$ NdCO 3 OH phases can be stabilized. Such entropy-driven stabilization, as is consistent with our geochemical modeling results, may explain the enhancement of thermal stability of the solid solutions in nature. Additionally, the temperature range constrained from this study may be used to estimate the thermal history of REE bastnӓsite deposit.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Magnetic structure evolution of LiFe 1- x Co x PO 4 olivines upon delithiation

We present a comprehensive study of the nuclear and magnetic structures of the mixed olivine solid solution series LiFe 1-x Co x PO 4 as well as their delithiated counterparts, for metal concentrations x = 0.2 - 0.6. Through neutron powder diffraction studies, we find that the LiFe 1-x Co x PO 4 series orders in the magnetic space group Pnma', consistent with their Li(Fe/Co)PO 4 parent structures. After chemical delithiation using peracetic acid, however, the removal of over 30% of the lithium from the lattice results in a transition from an A y -type to an A x -type antiferromagnetic structure. The magnetic space group consistent with A x antiferromagnetism was found to be Pn'm'a'. Interestingly, magnetic susceptibility measurements of both series reveal that delithiation increases the magnetic transition temperature, T N , from 50 K to 115 K. We find through analysis of the diffraction data that the unit cell parameters change linearly as a function of x; consequently, the exchange pathways between the Fe/Co magnetic cations are affected by the delithiation. Here, we discuss how exchange pathways, metal oxidation states, and d-orbital occupation all contribute to the observed magnetic symmetries and trends in T N in both series.

Antiferromagnet↗
DOE OSTI2024

Crystal structure and synchrotron X-ray powder reference pattern for the porous pillared cyanonickelate, Ni(3-amino-4,4′-bipyridine)[Ni(CN) 4 ]

The structure of Ni(3-amino-4,4′-bipyridine)[Ni(CN) 4 ] (or known as Ni-BpyNH 2 ) in powder form was determined using synchrotron X-ray diffraction and refined using the Rietveld refinement technique (R = 8.8%). The orthorhombic (Cmca) cell parameters were determined to be a = 14.7218(3) Å, b = 22.6615(3) Å, c = 12.3833(3) Å, V = 4131.29(9) Å 3 , and Z = 8. Ni-BpyNH 2 forms a 3-D network, with a 2-D Ni(CN) 4 net connecting to each other via the BpyNH 2 ligands. Further, there are two independent Ni sites on the net. The 2-D nets are connected to each other via the bonding of the pyridine “N” atom to Ni2. The Ni2 site is of six-fold coordination to N with relatively long Ni2–N distances (average of 2.118 Å) as compared to the four-fold coordinated Ni1–C distances (average of 1.850 Å). The Ni(CN) 4 net is arranged in a wave-like fashion. The functional group, –NH 2 , is disordered and was found to be in the m-position relative to the N atom of the pyridine ring. Instead of having a unique position, N has ¼ site occupancy in each of the four m-positions. The powder reference diffraction pattern for Ni-BpyNH 2 was prepared and submitted to the Powder Diffraction File (PDF) at the International Centre of Diffraction Data (ICDD).

36 MATERIALS SCIENCE↗
DOE OSTI2024

Quantification of Hydrogen Isotopes Utilizing Raman Spectroscopy Paired with Chemometric Analysis for Application across Multiple Systems

On-line and real-time analysis of a chemical process is a major analytical challenge that can drastically change the way the chemical industry or chemical research operates. With in situ analyses, new and powerful understanding of chemistry can be gained; however, building robust tools for long-term monitoring faces many challenges that include compensating for instrument drift, instrument replacement, and sensor or probe replacement. Accounting for these changes by recollecting calibration data and rebuilding quantification models can be costly and time consuming. Here, in this study, methods to overcome these challenges are demonstrated with an application of Raman spectroscopy to monitoring hydrogen isotopes with varied speciation within dynamic gas streams. Specifically, chemical data science tools such as chemometric modeling are leveraged along with several examples of calibration transfer approaches. Furthermore, the optimization of instrument and sensors cell parameters for targeted gas phase analyses is discussed. While the particular focus on hydrogen is highly beneficial within the nuclear energy sector, mechanisms built and demonstrated here are widely applicable to optical spectroscopy monitoring in numerous other chemical systems that can be leveraged in other hazardous processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗