Quantitative analysis of charge injection and discharging of Si nanocrystals and arrays by electrostatic force
Explore the source record for details and available documents.
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Explore the source record for details and available documents.
The Pockels electro-optic effect can be used to investigate the internal electric field in cadmium zinc telluride (CZT) single crystals that are used to fabricate room temperature x and gamma radiation detectors. An agreement is found between the electric field mapping obtained from Pockels effect images and the measurements of charge transients generated by alpha particles. The Pockels effect images of a CZT detector along two mutually perpendicular directions are used to optimize the detector response in a dual anode configuration, a device in which the symmetry of the internal electric field with respect to the anode strips is of critical importance. The Pockels effect is also used to map the electric field in a CZT detector with dual anodes and an attempt is made to find a correlation with the simulated electric potential in such detectors. Finally, the stress-induced birefringence effects seen in the Pockels images are presented and discussed.
NASA requirements for computing and memory for microspacecraft emphasizes high density, low power, small size, and radiation hardness. The distributed nature of a storage elements in nanocrystal floating-gate memories leads to instrinsic fault tolerance and radiation-hardness. Nanocrystal-based memories also offer the possibility of a faster, lower power operation.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Two conformational polymorphs of a donor–bridge–acceptor (D-B-A) dyad, p-(CH 3 ) 2 N-C 6 H 4 -(CH 2 ) 2 -(1-pyrenyl)/PyCHDMA, were studied, where the electron donor (D) moiety p-(CH 3 ) 2 N-C 6 H 4 /DMA is connected through a bridging group (B), –CH 2 –CH 2 –, to the electron acceptor (A) moiety pyrene. Though molecular dyads like PyCHDMA have the potential to change solar energy into electrical current through the process of photoinduced intramolecular charge transfer (ICT), the major challenge is the real-time investigation of the photoinduced ICT process in crystals, necessary to design solid-state optoelectronic materials. The time-correlated single photon counting (TCSPC) measurements with the single crystals showed that the ICT state lifetime of the thermodynamic form, PyCHDMA1 (pyrene and DMA: axial), is ~3 ns, whereas, for the kinetic form, PyCHDMA20 (pyrene and DMA: equatorial), it is ~7 ns, while photoexcited with 375 nm radiation. The polymorphic crystals were photo-excited and subsequently probed with a pink Laue x-ray beam in time-resolved x-ray diffraction (TRXRD) measurements. The TRXRD results suggest that in the ICT state, due to electron transfer from the tertiary N-atom in DMA moiety to the bridging group and pyrene moiety, a decreased repulsion between the lone-pair and the bond-pair at N-atom induces planarity in the C–N–(CH 3 ) 2 moiety, in both polymorphs. The Natural Bond Orbital calculations and partial atomic charge analysis by Hirshfeld partitioning also corroborated the same. Although the interfragment charge transfer (IFCT) analysis using the TDDFT results showed that for the charge transfer excitation in both conformers, the electrons were transferred from the DMA moiety to mostly the pyrene moiety, the bridging group has little role to play in that.
The extent of charge transfer between an adsorbate and thermocatalytic surface plays a key role in determining catalytic activity, but direct and quantitative measures have remained elusive. Here, we report the method of isopotential electron titration (IET), an approach that directly measures charge transfer between adsorbates and catalytic surfaces. Charge transfer between Pt and adsorbed hydrogen adatoms was investigated using a catalytic condenser, where the Pt surface was separated from a p-type silicon layer by a hafnia dielectric film. By forcing the Pt and Si layers into isopotential conditions, charge transfer between the adsorbate and Pt surface was titrated through an external circuit. Hydrogen atoms donated electrons to Pt upon adsorption, which was quantitatively reversed upon desorption. Across a temperature range of 125–200 °C (surface hydrogen fractional coverages of 80–100%), the charge transferred to Pt by an adsorbed hydrogen atom was measured to be 0.19 ± 0.01% |e|/H. Bader charge analysis of the extent of charge transfer was in agreement with experimental measurements, with a calculated net donation of 0.4% |e|/H. The ability to experimentally quantify surface charge transfer provides an electronic-based approach to characterize catalytic surfaces, the adsorbed moieties residing on them, and the chemical reactions they accelerate.
The platinum oxide Pt 3 O 4 exhibits metallic conductivity even though it contains square-planar PtO4 units, which in related oxides such as PtO are usually associated with insulating behavior. To identify the electronic origin of this anomalous metallicity, we performed a comprehensive first-principles study using the PBE and r 2 SCAN functionals together with Hubbard U corrections and spin-orbit coupling (SOC). Structural benchmarks show that r 2 SCAN with SOC and a moderate U value (<4 eV) reproduces the experimental lattice constants and formation enthalpy, whereas larger U values (~8 eV) destabilize the cubic structure. Across all functionals and U values considered in this work, Pt 3 O 4 remains metallic. Analyses of the projected density of states, band structures, charge-density isosurfaces, and bonding characteristics demonstrate that the dominant contribution to the metallic character originates from delocalized Pt–O–Pt hybridized antibonding states at the Fermi level. Direct Pt–Pt interactions are present but contribute less strongly to the conductivity. Bader charge analysis reveals only weak Pt charge disproportionation, consistent with mixed Pt II /Pt III character, and a small charge-transfer energy that prevents localization of the Pt 5d electrons even at elevated U. In contrast, PtO develops a Mott or charge-transfer gap under modest U despite having the same PtO 4 coordination environment. These findings demonstrate that persistent Pt–O–Pt covalency is the primary driver of metallicity in Pt 3 O 4 and support the view that this phase can remain conductive under oxygen reduction and oxygen evolution reaction conditions in fuel cell and electrolyzer environments.
An analysis is presented which is based upon a numerical solution of Gauss's law for the multiple dielectric semiconductor and electrode structure. The formulation resulted in a large set of equations, usually nonlinear, which were solved by an iterative scheme based upon the Gauss-Seidel method employing a relaxation parameter. Proper consideration of the nonlinearity of the space-charge in the semiconductor allowed convergent solutions which can give reasonable approximations to the channel potential profiles though not as good for estimating the space charge itself. The results of this work, which are three computer programs, are listed. None of the programs give the electric field explicitly as output data. However, when this information is desired, the programs can be expanded to include field estimations based on a polynominal fit to the potential field, or they may serve as subprograms for main programs dealing with general aspects of charge transfer.
The following tasks related to the FY 74 Shuttle Users Analysis were completed: (1) STS user charge analysis, (2) business risk and value of operations in space (BRAVO) analysis, and (3) standardized subsystem module analysis. The first task was required to initiate the process of furnishing transportation charge estimates for STS payloads to STS users.
Seven ‘lead’ dye-sensitizers from Tetrahydroquinoline (THQ) family were proposed and designed based on the structural attributes via quantitative-structure property relationship (QSPR) modeling. They were screened rationally through different computational approaches to explore their potential applications as photosensitizers for dye-sensitized solar cells (DSSCs). Compelling photophysical properties such as electron injection driving force, electron injection time, and dye regeneration were studied for the isolated dyes under the DFT and TD-DFT frameworks. Index of spatial extent (S, D, and Δq), the strength of charge transfer and separation along with the charge transfer process is explored. First principle approach including van der Waals density functional calculation of dye@TiO 2 interface indicates that all of the designed dyes have optimal interfacial behavior. Bader charge analysis, partial density of state (PDOS), charge density and electrostatic potential difference calculation confirms that THQ7 and THQ9 are the most efficient dye-sensitizers. The other five designed dyes also possess the required properties to emerge as effective dye-sensitizers potentially better than those already utilized.
Abstract Two-dimensional electron gas or hole gas (2DEG or 2DHG) and their functionalities at artificial heterostructure interfaces have attracted extensive attention in recent years. Many theoretical calculations and recent experimental studies have shown the formation of alternating 2DEG and 2DHG at ferroelectric/insulator interfaces, such as BiFeO 3 /TbScO 3 , depending on the different polarization states. However, a direct observation based on the local charge distribution at the BiFeO 3 /TbScO 3 interface has yet to be explored. Herein we demonstrate the direct observation of 2DHG and 2DEG at BiFeO 3 /TbScO 3 interface using four-dimensional scanning transmission electron microscopy and Bader charge analysis. The results show that the measured charge state of each Fe/O columns at the interface undergoes a significant increase/reduction for the polarization state pointing away/toward the interface, indicating the existence of 2DHG/2DEG. This method opens up a path of directly observing charge at atomic scale and provides new insights into the design of future electronic nanodevices.
Thin silicon nitride (SiN x ) membranes are widely used in gas and liquid phase transmission electron microscopy (TEM) and as phase plates to enhance imaging contrast. SiN x contains trap sites for both positive and negative charges, which can be manipulated by high-energy electron irradiation, external potential biasing, or light exposure. Charge accumulation on the membrane can significantly affect in situ TEM processes, including chemical and electrochemical reactions, nanoparticle dynamics, and catalytic activity, or introduce unwanted phase shifts when used as a phase plate. Here, in this study, charge accumulation on suspended SiN x membranes was investigated using off-axis electron holography combined with model-free charge analysis, supported by custom finite element analysis (FEA) simulations. An average residual positive charge density of approximately 2.8 × 10 −4 C m −2 was measured. Localized and stable regions of both positive and negative charges were identified on the membrane. The global positive and localized positive/negative charges give rise to strong electric fields and electroosmotic slip velocities at the membrane surface, which are sufficient to induce non-Brownian particle behavior and directional fluid flow, offering a physical explanation for previously observed anomalies in particle dynamics, nucleation, and growth during gas and liquid phase TEM experiments. These results provide a benchmark for understanding charge behavior at SiNx interfaces in gas and liquid phase TEM. Furthermore, the FEA simulations establish a framework for future investigations into charge distribution, electrostatic potentials, and electrical double layers at solid–liquid interfaces, particularly in complex geometries and chemically dynamic environments.
To better understand the aqueous chemical reactivity of clay mineral edges we explored the relationships between hydration and the structure of (010)-type edges of pyrophyllite. In particular, we used density functional theory and the quantum theory of atoms in molecules to evaluate the stability of 6-fold coordinated hydrated aluminum at the edge in terms of the electron density distribution. Geometrical optimization revealed an intra-edge hydrogen bond network between aluminol hydroxyls and water ligands completing the aluminum coordination shell. From the electron density isosurfaces one water ligand is not covalently bonded to aluminum. Bader charge analysis revealed that there is a small charge transfer between this water ligand and the aluminum that stabilizes its location, but which derives from the formation of the hydrogen bond network and not from Al-OH 2 interaction per se. To clarify which edge species make the most significant hydrogen bond to this water ligand, we evaluate Bader charges in edge systems including 5-fold coordinated aluminums with and without geometrical optimization. From this comparison the charge transfer is a combined result of charge transfer from the aluminum to aluminol hydroxyls and then from aluminol hydroxyls to OH 2 ligands. This suggests that the weakly bound water ligand in question, and more generally 6-fold hydrated edge Al coordination, is stabilized primarily by the hydrogen bond network which in turn leads to weak ionic attraction to the aluminum center itself. The finding highlights the importance of cooperative effects between solvent structure and the coordination of metal cations exposed at clay mineral edges.
First principles electronic structure studies on the ground state geometries, stability, and the electronic structure of Al n Na m and Al n Mg m (m ≤ 3, n + m ≤ 15) clusters have been carried out to examine the nature of bonding between Na or Mg and Al. Identifying whether the bonding is ionic or metallic in bulk materials is typically straightforward; however, in small clusters where quantum confinement is important, the nature of bonding may become unclear. Here, we have performed a critical analysis of the bonding in these bimetallic clusters using charge analysis, electrical dipole moments, hybridization of the atomic orbitals, the Laplacian of the charge density at the bond critical points, and the change in the bonding energy between neutral and anionic forms of the cluster. For Na n Al m clusters, we find that the Na binding is primarily ionic, while the bonding in Al n Mg m is primarily metallic. We find that the Mulliken population of the 3 p orbital of Na and Mg can provide a rapid assessment of the nature of bonding. We also find that the Hirshfeld charge and dipole moments are effective indicators, when placed in context. We found that the Laplacian of the charge density at the bond critical points can be misleading in identifying whether the bonding is ionic or metallic in small clusters.
Ab initio total energy calculations have been performed to investigate the properties of intrinsic defects in GaN. It is found that the nitrogen defects are more stable than the Ga defects under nitrogen-rich conditions, and the results are generally consistent with those obtained by recent first-principles calculations. For the four types of nitrogen interstitials investigated, relaxation of all configurations leads to a N–N<11-20> split configuration. The most stable configuration for Ga interstitials is the Ga octahedral interstitial, but the energy difference between the octahedral and tetrahedral configurations is small (<0.35 eV) and depends on the basis set employed. While the _N–N_ bond distance in the N–N split interstitial is very close to that of a free N2 molecule, the Mulliken charge analysis indicates that the N atoms are partially charged, which is in contrast with previous theoretical suggestions. Based on the calculated results, the relative stabilities of various defects in GaN are determined.
SEE program management originated at LaRC in the early 1990's but was transferred to MSFC in FY 1995 and has remained at Marshall since that time, SEE uses 5 technical working groups and NRA's (three since 1994) to achieve its technical objectives. The SEE vision is to develop and maintain a preeminent program in SPACE ENVIRONMENTS AND EFFECTS which provides a coordinated national focus for innovative technology development to support design, development, and operation of spacecraft systems that will accommodate or mitigate effects due to the presence of the space environment. In working toward that goal, SEE has produced, through the years, over 30 major Space Environments and Effects Models and Databases, over 75 major Space Environments and Effects Publications, a website that has had over 112,000 hits since its inception (http://see.msfc.nasa.gov/), distribution of physical products that amounts to over a total of over 260 product deliveries, sponsorship of the last four international Spacecraft Charging Technology Conferences (the major subject matter conference in the world), and sponsorship of numerous technical standards and guidelines in the Space Environments area. Among the recent popular SEE products are the Electric Propulsion Interactions Code (EPIC), the NASA/Air Force Spacecraft Charging Analysis Program (NASCAP-2K), the Interactive Spacecraft Charging Handbook, the Cosmic Ray Effects on Microelectronics Code (CREME 96), the Spacecraft Contamination and Materials Outgassing Effects Knowledge base (SCMOEK), and the Lunar E-Library.
Not Available