Search NASA⌕ Search

SEARCH · Search NASA

Results for “che”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

A Comparison of Reduced Order Modeling Techniques Used in Dynamic Substructuring [PowerPoint]

Experimental dynamic substructuring is a means whereby a mathematical model for a substructure can be obtained experimentally and then coupled to a model for the rest of the assembly to predict the response. Recently, various methods have been proposed that use a transmission simulator to overcome sensitivity to measurement errors and to exercise the interface between the substructures; including the Craig-Bampton, Dual Craig-Bampton, and Craig-Mayes methods. This work compares the advantages and disadvantages of these reduced order modeling strategies for two dynamic substructuring problems. The methods are first used on an analytical beam model to validate the methodologies. Then they are used to obtain an experimental model for structure consisting of a cylinder with several components inside connected to the outside case by foam with uncertain properties. This represents an exceedingly difficult structure to model and so experimental substructuring could be an attractive way to obtain a model of the system.

97 MATHEMATICS AND COMPUTING↗

Improved measurement of the branching fraction of hc → γη′/η and search for hc → γπ0

Abstract The processesh c → γP(P=η′, η, π 0 ) are studied with a sample of (27.12±0.14)×10 8 ψ(3686) events collected by the BESIII detector at the BEPCII collider. The decayh c → γηis observed for the first time with the significance of 9.0σ, and the branching fraction is determined to be (3.77±0.55±0.13±0.26)×10 −4 , while$$ \mathcal{B} $$ B (h c → γη′) is measured to be (1.40±0.11±0.04±0.10)×10 −3 , where the first uncertainties are statistical, the second systematic, and the third from the branching fraction ofψ(3686)→ π 0 h c . The combination of these results allows for a precise determination of$$ {R}_{h_c}=\frac{\mathcal{B}\left({h}_c\to {\pi}^0\gamma \eta \right)}{\mathcal{B}\left({h}_c\to {\pi}^0\gamma {\eta}^{\prime}\right)}, $$ R h c = B h c → γη B h c → γ η ′ , which is calculated to be (27.0±4.4±1.0)%. The results are valuable for gaining a deeper understanding ofη − η′ mixing, and its manifestation within quantum chromodynamics. No significant signal is found for the decayh c →γπ 0 , and an upper limit is placed on its branching fraction of$$ \mathcal{B} $$ B (h c →γπ 0 )<5.0×10 −5 , at the 90% confidence level.

Physics↗

Amplitude analysis of ψ3686→γKS0KS0

Using (2712 ± 14) × 106ψ(3686) events collected with the BESIII detector, we perform the first amplitude analysis of the radiative decay ψ3686→γKS0KS0$$ \psi (3686)\to \gamma {K}_S^0{K}_S^0 $$ within the mass region MKS0KS0<2.8$$ {M}_{K_S^0{K}_S^0}<2.8 $$ GeV/c2. Employing a one-channel K-matrix approach for the description of the dynamics of the KS0KS0$$ {K}_S^0{K}_S^0 $$ system, the data sample is well described with four poles for the f0-wave and three poles for the f2-wave. The determined pole positions are consistent with those of well-established resonance states. The observed f0 and f2 states are found to be in agreement with those produced in radiative J/ψ decays. The production behaviors of f0 and f2 poles in ψ3686→γKS0KS0$$ \psi (3686)\to \gamma {K}_S^0{K}_S^0 $$ are qualified with their residues and the converted branching fractions. By comparing with J/ψ→γKS0KS0$$ J/\psi \to \gamma {K}_S^0{K}_S^0 $$ decay, the ratios Bψ3686→γf0,2BJ/ψ→γf0,2$$ \frac{\mathcal{B}\left(\psi (3686)\to \gamma {f}_{0,2}\right)}{\mathcal{B}\left(J/\psi \to \gamma {f}_{0,2}\right)} $$ are determined, which provides crucial experimental inputs on the internal structure of the f0,2 states, especially their potential mixing with glueball components.

Ablikim, M↗

Measurement of the phase between strong and electromagnetic amplitudes in the decay J/ψ → ϕη

The first direct measurement of the relative phase between the strong and electromagnetic amplitudes for a J/ψ decaying into a vector-pseudoscalar final state is performed using 26 energy points of e + e − annihilation data between 3.00 GeV and 3.12 GeV. The data sets were collected by the BESIII detector with a total integrated luminosity of 452 pb −1 . By investigating the interference pattern in the cross section lineshape of e + e − → ϕη, the relative phase between the strong and electromagnetic amplitudes of J/ψ decay is determined to be within [133°, 228°] at 68% confidence level.

QCD↗

Field-assisted suppression of coke in the methane steam reforming reaction

Electric fields were applied to an unsupported nickel catalyst during methane steam reforming with a low steam-to-methane ratio of 2:1. As expected, catalysts operated in standard mode (without an applied field) experienced high levels of coking. Coke formation was almost completely suppressed by the application of a positive electric field. This is explained using density functional theory computations which indicate that positive electric fields (1) increase the affinity for water adsorption on the surface, thereby increasing the amount of oxygen available to remove carbon, (2) stabilize individual carbon fragments, thus reducing their tendency to polymerize, and (3) increase the oxygen storage capabilities of the catalyst by inducing sub-surface oxygen formation and bulk oxidation.

Gray, Jake T.↗

Modeling the adsorbate coverage distribution over a multi-faceted catalytic grain in the presence of an electric field: O/Fe from first principles

The impact of an external electric field on the concerted behavior of oxygen over a multi-faceted catalytic Fe grain is determined via the interpolation of ab initio models of oxygen adsorption on Fe(100), Fe(110), and Fe(111) in the presence of an external electric field. The application of both negative and positive electric fields weaken the adsorption strength for oxygen on all three surface facets, with Fe(110) experiencing the greatest effect. Kinetic models of a multi-faceted catalytic Fe grain show that the average oxygen coverage over the grain surface is reduced under the influence of both a negative and positive electric field, which are consistent with phase diagram results at comparable pressures. Furthermore, we show that there is a weak synergistic effect between a Pd promoter and a positive electric field on the oxygen adsorption energy, i.e. the Pd promoter and electric field combination weaken the oxygen adsorption energy to a greater degree than the simple addition of both components separately. Overall, the work shows that the application of an applied external electric field may be a useful tool in fine-tuning chemical properties of Fe-based catalysts in hydrodeoxygenation applications.

Bray, Jacob E.↗

A model for droplet heating and evaporation of water-in-oil emulsified fuel

Water-in-oil (W/O) emulsified fuel is a promising alternative fuel by inducing flash boiling of water at high temperature that can improve the atomization of fuel spray. The heating and evaporation process of emulsified fuel droplet is affected by the diffusion and coalescence of small dispersed water droplets in oil during the heating. In this study, a model is developed for the droplet heating and evaporation of W/O emulsified fuel with these key physics considered. The diffusivity of dispersed water droplets in oil is calculated using the Stokes-Einstein equation. The deactivation temperature of surfactant is selected as a criterion for the water coalescence since the water coalescence is due to the deactivation of surfactant. The process of water coalescence is simplified that the dispersed water droplets coalesce into one single water sub-droplet at the center of the oil droplet instantly as the droplet temperature reaches the deactivation temperature of surfactant. The model is validated against experimental data of single droplet under different heating temperatures, surfactant concentrations, and sizes of dispersed water droplets. Based on the proposed model, the effects of fuel properties and heating conditions on the droplet heating and evaporation are analyzed.

Droplet coalescence↗

Size-dependent characteristics of ultra-fine oxygen-enriched nanoparticles in austenitic steels

Here, a coordinated investigation of the elemental composition and morphology of ultra-fine-scale nanoparticles as a function of size within a variety of austenitic oxide dispersion-strengthened (ODS) steels is reported. Atom probe tomography was utilized to evaluate the elemental composition of these nanoparticles. Meanwhile, the crystal structures and orientation relationships were determined by high resolution transmission electron microscopy. The nanoparticles with sufficient size (>4 nm) to maintain a Y2Ti2-xO7-2x stoichiometry were found to have a pyrochlore structure, whereas smaller YxTiyOz nanoparticles lacked a well-defined structure. The size-dependent characteristics of the nanoparticles in austenitic ODS steels differ from those in ferritic/martensitic ODS steels.

atom probe tomography↗