Search NASA⌕ Search

SEARCH · Search NASA

Results for “chemical pattern”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Exploration of a Combined LIBS and LA-ICP-MS Approach for Apatite Characterisation

A combined laser‐induced breakdown spectroscopy (LIBS) and laser ablation‐inductively coupled plasma‐mass spectrometry (LA‐ICP‐MS) method is demonstrated for comprehensive apatite analysis. These measurements provide elemental imaging that can be used as a screening technique for chemical selection of grains for subsequent analysis (e.g., U‐Pb geochronology) or can be used to understand elemental distributions within a single grain that would have direct textural‐chemical implications (e.g., zoning patterns). Adding LIBS as a simultaneous measurement, to LA‐ICP‐MS U‐Pb geochronology, allowed for the direct determination of F (H and O show promise for future applications) in addition to major and trace elements of interest. Here, the quantitative measurements were validated against a series of apatites with known values and used to characterise a wide range of samples. Fluorine detection limits were determined to be as low as 70 μg g ‐1 F (broadband CMOS detector) and 4.2 μg g ‐1 F (ICCD detector). U‐Pb age dating was simultaneously collected by LA‐ICP‐MS with the quantitative elemental data from LIBS, providing a comprehensive method for geochronology.

Apatite↗
DOE OSTI2025

Enhancing tandem mass spectrometry-based metabolite annotation with online chemical labeling

Abstract Metabolite identification in non-targeted mass spectrometry-based metabolomics remains a major challenge due to limited spectral library coverage and difficulties in predicting metabolite fragmentation patterns. Here, we introduce Multiplexed Chemical Metabolomics (MCheM), which employs orthogonal post-column derivatization reactions integrated into a unified mass spectrometry data framework. MCheM generates orthogonal structural information that substantially improves metabolite annotation through in silico spectrum matching and open-modification searches, offering a powerful new toolbox for the structure elucidation of unknown metabolites at scale.

Science & Technology - Other Topics↗
DOE OSTI2021

Direct Optical Lithography of CsPbX 3 Nanocrystals via Photoinduced Ligand Cleavage with Postpatterning Chemical Modification and Electronic Coupling

Microscale patterning of solution-processed nanomaterials is important for integration in functional devices. Colloidal lead halide perovskite (LHP) nanocrystals (NCs) can be particularly challenging to pattern due to their incompatibility with polar solvents and lability of surface ligands. Here, we introduce a direct photopatterning approach for LHP NCs through the binding and subsequent cleavage of a photosensitive oxime sulfonate ester (-C=N-OSOO-). The photosensitizer binds to the NCs through its sulfonate group and is cleaved at the N-O bond during photoirradiation with 405 nm light. This bond cleavage decreases the solubility of the NCs, which allows patterns to emerge upon development with toluene. Postpatterning ligand exchange results in photoluminescence quantum yields of up to 79%, while anion exchange provides tunability in the emission wavelength. Finally, the patterned NC films show photoconductive behavior, demonstrating that good electrical contact between the NCs can be established.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2023

Ionic Liquid-Mediated Scanning Probe Electro-Oxidative Lithography as a Novel Tool for Engineering Functional Oxide Micro- and Nano-Architectures

Functional oxides have extensively been investigated as a promising class of materials in a broad range of innovative applications. Harnessing the novel properties of functional oxides in micro- to nano-scale applications hinges on establishing advanced fabrication and manufacturing techniques able to synthesize these materials in an accurate and reliable manner. Oxidative scanning probe lithography (o-SPL), an atomic force microscopy (AFM) technique based on anodic oxidation at the water meniscus formed at the tip/substrate contact, not only combines the advantages of both “top-down” and “bottom-up” fabrication approaches, but also offers the possibility of fabricating oxide nanomaterials with high patterning accuracy. While the use of self-assembled monolayers (SAMs) broadened the application of o-SPL, significant challenges have emerged owing to the relatively limited number of SAM/solid surface combinations that can be employed for o-SPL, which constrains the ability to control the chemistry and structure of oxides formed by o-SPL. Here, in this work, a new o-SPL technique that utilizes room-temperature ionic liquids (RTILs) as the functionalizing material to mediate the electrochemistry at AFM tip/substrate contacts is reported. The results show that the new IL-mediated o-SPL (IL-o-SPL) approach allows sub-100 nm oxide features to be patterned on a model solid surface, namely steel, with an initiation voltage as low as -2 V. Moreover, this approach enables high tunability of both the chemical state and morphology of the patterned iron oxide structures. Owing to the high chemical compatibility of ILs, which derives from the possibility of synthesizing ILs able to adsorb on a wide variety of solid surfaces, IL-o-SPL can be extended to other material surfaces and provide the opportunity to accurately tailor the chemistry, morphology, and electronic properties within nanoscale domains, thus opening new pathways to the development of novel micro- and nano-architectures for advanced integrated devices.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Direct identification of Ac and No molecules with an atom-at-a-time technique

The periodic table provides an intuitive framework for understanding chemical properties. However, its traditional patterns may break down for the heaviest elements occupying the bottom of the chart. Here, the large nuclei of actinides (Z > 88) and superheavy elements (Z ≥ 104) give rise to relativistic effects that are expected to substantially alter their chemical behaviours, potentially indicating that we have reached the end of a predictive periodic table. Relativistic effects have already been cited for the unusual chemistry of the actinides compared with those of their lanthanide counterparts. Unfortunately, it is difficult to understand the full impact of relativistic effects, as research on the later actinides and superheavy elements is scarce. Beyond fermium (Z = 100), elements need to be produced and studied one atom at a time, using accelerated ion beams and state-of-the-art experimental approaches. So far, no experiments have been capable of directly identifying produced molecular species. Here ions of actinium (Ac, Z = 89) and nobelium (No, Z = 102) were synthesized through nuclear reactions at the 88-Inch Cyclotron facility at Lawrence Berkeley National Laboratory and then exposed to trace amounts of H 2 O and N 2 . The produced molecular species were directly identified by measuring their mass-to-charge ratios using FIONA (For the Identification Of Nuclide A). These results mark the first, to our knowledge, direct identification of heavy-element molecular species using an atom-at-a-time technique and highlight the importance of such identifications in future superheavy-element chemistry experiments to deepen understanding of their chemical properties.

Pore, Jennifer L. [Lawrence Berkeley National Labo↗
DOE OSTI2023

Natural Fracture Pattern Development Using 3D Coupled Numerical Model: Mechanics and Diagenesis

In the earth's crust, while tectonic processes can mechanically create natural fractures, cementation can simultaneously grow on the surfaces of the fractures. This crystallization can affect the growth of the fractures. To more accurately address the modeling of natural fracture development, both mechanical deformation and chemical diagenesis should be carried out in an integrated manner. Here, we achieve this with a three-dimensional (3D) simulator that couples mechanical and chemical processes for natural fracture pattern development in layer confined situations. Tectonic loading over geologic time is mimicked by displacement driven boundary conditions in a 3D displacement discontinuity method (DDM) scheme. Quartz diagenesis competes with mechanical fracture opening, resulting in three different cementation conditions - open, bridging or fully infilled – which define fracture element stiffness that is used as feedback within the 3D-DDM code during propagation. An important milestone of this work is that this coupled structural diagenetic model can reproduce power-law aperture population statistics which cannot be generated using mechanics alone. More accurately estimated mechanical fracture apertures and their cementation condition is a critical step toward better permeability estimation and fluid path analysis for subsurface reservoirs.

58 GEOSCIENCES↗
DOE OSTI2024

A chemical kinetics theory for interpreting the non-monotonic temperature dependence of enzymatic reactions

Abstract. One notable observation of enzymatic chemical reactions is that, for a given abundance of enzymes and substrates, temperature increases cause reaction rates to first increase consistent with the Arrhenius relationship, then plateau, and finally fall off quickly to zero at high temperatures. While many mathematical functions have been used to describe this pattern, we here propose a chemical kinetics theory which successfully replicates this observation and provides insights into the processes responsible for these dynamics. The chemical kinetics theory combines the law of mass action, von Smoluchowski's diffusion-limited chemical reaction theory, and Eyring's transition state theory. This new theory reveals that the thermally reversible enzyme denaturation ensured by the ceaseless thermal motion of molecules and ions in an enzyme solution explains the plateau and subsequent decrease in chemical reaction rates with increasing temperature. The temperature-dependent affinity parameter (K) that relates enzymes and substrates through their binding also affects the shape of the emergent temperature response. We demonstrate that with an increase in substrate availability, K shifts the optimal temperature, where reaction rates plateau, towards higher values. Further, we show that the chemical kinetics theory accurately represents 12 sets of published enzyme assay data and includes the popular mechanistic model by Ratkowsky et al. (2005) as a special case. Given its good performance and solid theoretical underpinning, we believe this new theory will facilitate the construction of more mechanistic-based environmental biogeochemical models.

Tang, Jinyun↗
DOE OSTI2021

A Deep Learning Modeling Framework to Capture Mixing Patterns in Reactive-Transport Systems

Prediction and control of chemical mixing are vital for many scientific areas such as subsurface reactive transport, climate modeling, combustion, epidemiology, and pharmacology. Due to the complex nature of mixing in heterogeneous and anisotropic media, the mathematical models related to this phenomenon are not analytically tractable. Numerical simulations often provide a viable route to predict chemical mixing accurately. However, contemporary modeling approaches for mixing cannot utilize available spatial-temporal data to improve the accuracy of the future prediction and can be compute-intensive, especially when the spatial domain is large and for long-term temporal predictions. To address this knowledge gap, in this work we will present in this paper a deep learning (DL) modeling framework applied to predict the progress of chemical mixing under fast bimolecular reactions. This framework uses convolutional neural networks (CNN) for capturing spatial patterns and long short-term memory (LSTM) networks for forecasting temporal variations in mixing. By careful design of the framework—placement of non-negative constraint on the weights of the CNN and the selection of activation function, the framework ensures non-negativity of the chemical species at all spatial points and for all times. Our DL-based framework is fast, accurate, and requires minimal data for training. The time needed to obtain a forecast using the model is a fraction (≈ O(-6)) of the time needed to obtain the result using a high-fidelity simulation. To achieve an error of 10% (measured using the infinity norm) for capturing local-scale mixing features such as interfacial mixing, only 24% to 32% of the sequence data for model training is required. To achieve the same level of accuracy for capturing global-scale mixing features, the sequence data required for model training is 64% to 70% of the total spatial-temporal data. Hence, the proposed approach—a fast and accurate way to forecast long-time spatial-temporal mixing patterns in heterogeneous and anisotropic media—will be a valuable tool for modeling reactive-transport in a wide range of applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Model bias in simulating major chemical components of PM 2.5 in China

High concentrations of PM 2.5 (particulate matter with an aerodynamic diameter less than 2.5 µm) in China have caused severe visibility degradation. Accurate simulations of PM 2.5 and its chemical components are essential for evaluating the effectiveness of pollution control strategies and the health and climate impacts of air pollution. In this study, we compared the GEOS-Chem model simulations with comprehensive datasets for organic aerosol (OA), sulfate, nitrate, and ammonium in China. Model results are evaluated spatially and temporally against observations. The new OA scheme with a simplified secondary organic aerosol (SOA) parameterization significantly improves the OA simulations in polluted urban areas, highlighting the important contributions of anthropogenic SOA from semivolatile and intermediate-volatility organic compounds. The model underestimates sulfate and overestimates nitrate for most of the sites throughout the year. More significant underestimation of sulfate occurs in winter, while the overestimation of nitrate is extremely large in summer. The model is unable to capture some of the main features in the diurnal pattern of the PM 2.5 chemical components, suggesting inaccuracies in the presented processes. Potential model adjustments that may lead to a better representation of the boundary layer height, the precursor emissions, hydroxyl radical concentrations, the heterogeneous formation of sulfate and nitrate, and the wet deposition of nitric acid and nitrate have been tested in the sensitivity analysis. The results show that uncertainties in chemistry perhaps dominate the model biases. The proper implementation of heterogeneous sulfate formation and the good estimates of the concentrations of sulfur dioxide, hydroxyl radical, and aerosol liquid water are essential for the improvement of the sulfate simulation. The update of the heterogeneous uptake coefficient of nitrogen dioxide significantly reduces the modeled concentrations of nitrate. However, the large overestimation of nitrate concentrations remains in summer for all tested cases. The possible bias in the chemical production and the wet deposition of nitrate cannot fully explain the model overestimation of nitrate, suggesting issues related to the atmospheric removal of nitric acid and nitrate. A better understanding of the atmospheric nitrogen budget, in particular, the role of the photolysis of particulate nitrate, is needed for future model developments. Moreover, the results suggest that the remaining underestimation of OA in the model is associated with the underrepresented production of SOA.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

The variation in self-organized anode plasma pattern structure with solution electrolyte type in 1 atm DC glow discharge

Abstract Plasma self-organization on anode surfaces in 1 atm DC glow discharges remains poorly understood. This effort aims to elucidate the nature of self-organization through the experimental study of resulting patterns on liquid anode surfaces with 13 different electrolytes and thus improves our understanding of the underlying physical processes that give rise to self-organization by investigating electrolyte sensitivity. Self-organization pattern formation and behavior were studied as a function of discharge current, solution ionic strength, and their chemical property evaluation. The response of the patterns to variation in these parameters was measured using an imaging camera and optical emission spectroscopy. Observed pattern characteristic length scales for all of the electrolytes were ranged from 2 to 13 mm and typically increased with current over the investigated range of 20–80 mA. Complex self-organized pattern structures not reported to date were also observed. The parameters associated with pattern formation and morphology complexity are discussed and summarized.

Physics↗
DOE OSTI2021

Topographic and nanomechanical mapping of plutonium surfaces

Atomic force microscopy of gallium-stabilized δ-phase plutonium coupons has been used to map their topography and qualitative mechanical character, including Derjaguin-Muller-Toporov modulus, adhesion, deformation, and dissipation. Initial topographical results demonstrate that the plutonium surface is considerably rough and heterogeneous. Qualitative nanomechanical mapping revealed distinct striation patterns that are not observed in the topography images. Further investigation of the striations in the nanomechanical modes of imaging suggest that they are not measurement artifacts, or plutonium specific features. Similar investigations of stainless steel surfaces established a strong correlation between the mechanical working of the surface (i.e. cutting and grinding) and the appearance of the striations. Reimaging of the plutonium surface after moderate oxidation occurring within an inert Ar atmosphere (~1 ppm O 2 ) over the course of 13 months revealed a diminished striation pattern. It is suggested that surface stress/strain induced by the mechanical working of the metal surfaces results in the patterns of variable modulus, adhesion, deformation, and dissipation, and that these patterns are affected by the chemical changes and aging of the plutonium surface.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Crystal structure of alectinib hydrochloride Type I, C 30 H 35 N 4 O 2 Cl

The crystal structure of alectinib hydrochloride has been solved and refined using synchrotron X-ray powder diffraction data and optimized using density functional theory techniques. Alectinib hydrochloride crystallizes in space groupP2 1 /n(#14) with the following parameters:a= 12.67477(7),b= 10.44076(5),c= 20.38501(12) Å,β= 93.1438(7)°,V= 2693.574(18) Å 3 , andZ= 4 at 295 K. The crystal structure consists of stacks of molecules along theb-axis, and the stacks contain chains of strong N–H⋯Cl hydrogen bonds. One density functional theory calculation moved a proton from an N atom to the Cl, but another calculation yielded a more chemically reasonable result. The powder pattern has been submitted to ICDD for inclusion in the Powder Diffraction File™ (PDF®)

Materials Science↗
DOE OSTI2024

Novel Charge-Ordered States in 1 T -IrTe 2

1T-IrTe 2 exhibits an intriguing series of charge-ordered states in both bulk and atomically thin layers. The charge orders in IrTe 2 emerge with consecutive first-order structural transitions involving in-plane Ir–Ir dimerization and interlayer Te–Te depolymerization, resulting in stripe patterns with various periods. Upon chemical doping, 1T-IrTe 2 can also be driven into a superconductor. Despite the intense research effort, a comprehensive understanding of the nature of the charge ordering and its relation to the superconductivity is yet to be reached. This review provides an overview of the novel charge orders and the emergence of superconductivity in IrTe 2 . Finally, we further introduce the recent studies on IrTe 2 nanoflake, in which novel charge orders attainable only in two-dimensional limits lay the grounds for an exotic phase diagram.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Asynchronous domain dynamics and equilibration in layered oxide battery cathode

To improve lithium-ion battery technology, it is essential to probe and comprehend the microscopic dynamic processes that occur in a real-world composite electrode under operating conditions. The primary and secondary particles are the structural building blocks of battery cathode electrodes. Their dynamic inconsistency has profound but not well-understood impacts. In this research, we combine operando coherent multi-crystal diffraction and optical microscopy to examine the chemical dynamics in local domains of layered oxide cathode. Our results not only pinpoint the asynchronicity of the lithium (de)intercalation at the sub-particle level, but also reveal sophisticated diffusion kinetics and reaction patterns, involving various localized processes, e.g., chemical onset, reaction front propagation, domains equilibration, particle deformation and motion. These observations shed new lights onto the activation and degradation mechanisms of state-of-the-art battery cathode materials.

25 ENERGY STORAGE↗
DOE OSTI2025

Laser-induced selective local patterning of vanadium oxide phases

The same elements can form different compounds with widely different physical properties. Synthesis of a single-phase material is commonly achieved by controlling experimental conditions. Synthesizing materials that incorporate multiple specific spatially distributed chemical phases is often challenging, especially if different phases must be organized into well-defined spatial patterns. Here, we present an efficient solid reaction laser annealing (SRLA) approach to directly write regions of different local chemical compositions. We demonstrate the practical utility of our approach by locally writing microscale patterns of distinct chemical phases in vanadium oxide thin films. Specifically, we achieved the controlled local recrystallization of a uniform V 2 O 3 matrix into VO 2 , V 3 O 5 , and V 4 O 7 regions exhibiting sharp 1st- and 2nd-order metal–insulator phase transitions over a wide range of critical temperatures, i.e., a characteristic feature of select vanadium oxides that is extremely sensitive to even minute structural or compositional imperfections. We utilized the local chemical phase writing to pattern spiking oscillators with distinct electrical behavior directly in the thin film sample without employing elaborate lithography fabrication. Our laser tuning local chemical composition opens a pathway to synthesize a wide range of artificially micropatterned composite materials, with precision and control unattainable in conventional material synthesis methods.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Chemical Analysis of the Ultrafaint Dwarf Galaxy Grus II. Signature of High-mass Stellar Nucleosynthesis

We present a detailed abundance analysis of the three brightest member stars at the top of the giant branch of the ultrafaint dwarf (UFD) galaxy Grus II. All stars exhibit a higher than expected [Mg/Ca] ratio compared to metal-poor stars in other UFD galaxies and in the Milky Way (MW) halo. Nucleosynthesis in high-mass ( 20 M ⊙) core-collapse supernovae has been shown to create this signature. The abundances of this small sample (three) stars suggests the chemical enrichment of Grus II could have occurred through substantial high-mass stellar evolution, and is consistent with the framework of a top-heavy initial mass function. However, with only three stars it cannot be ruled out that the abundance pattern is the result of a stochastic chemical enrichment at early times in the galaxy. The most metal-rich of the three stars also possesses a small enhancement in rapid neutron-capture (r-process) elements. The abundance pattern of the r-process elements in this star matches the scaled r-process pattern of the solar system and r-process enhanced stars in other dwarf galaxies and in the MW halo, hinting at a common origin for these elements across a range of environments. All current proposed astrophysical sites of r-process element production are associated with high-mass stars, thus the possible top-heavy initial mass function of Grus II would increase the likelihood of any of these events occurring. The time delay between the α and r-process element enrichment of the galaxy favors a neutron star merger as the origin of the r-process elements in Grus II.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

The Zintl Concept Applied to Intergrowth Structures: Electron‐Hole Matching, Stacking Preferences, and Chemical Pressures in Pd 5 InAs

Abstract Enumerating the potential stacking sequences of layers is a fundamental way to account for the structure diversity of solid state compounds. In many cases, these stacking variations represent polymorphs with only small energetic differences. Here, we examine a compound for which the preferred stacking pattern instead reveals key aspects about its chemical bonding: Pd 5 InAs. Its structure is based on the intergrowth of slabs of the AuCu 3 and PtHg 2 (or alternatively, fluorite) structure types. Two basic stacking arrangements are available to this compound, represented by the Pd 5 TlAs and HoCoGa 5 structure types. DFT total energy calculations reveal that the former outcompetes the latter by a staggering 0.65 eV/formula unit. Through a combination of DFT‐reversed approximation Molecular Orbital (DFT‐raMO) and DFT‐Chemical Pressure (DFT‐CP) analysis we trace this preference to two factors. First, with DFT‐raMO analysis, we derive a Zintl‐like bonding scheme of Pd 5 InAs. This scheme, along with the inspection of selected crystal orbitals, is then connected to preferred stacking through the coordination environments of the Pd atoms at the interface between the Pd−In and Pd−As layers. In the hypothetical HoCoGa 5 ‐type and observed Pd 5 InAs‐type structures, different Pd coordination environments arise at the interfaces. The hypothetical structure features square planar PdIn 2 As 2 units, in each of which the same 4d‐orbital serves in the Pd sublattice's role as both Lewis acid (for interactions with the As) and Lewis base (for interactions with the In). In the observed structure, tetrahedral PdIn 2 As 2 units occur instead, so that these contradictory roles are distributed to separate 4d‐orbitals, leading to more effective bonding. DFT‐CP analysis illustrates that this driving force for the Pd 5 TlAs‐type arrangement is supplemented by a favorable alignment of the packing tensions in the parent structures. Altogether, the resulting picture demonstrates how the reaction of simple intermetallic structures to form intergrowths can be guided by recognizable chemical interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Electron-Beam-Related Studies of Halide Perovskites: Challenges and Opportunities

Electron beam microscopy and related characterization techniques play an important role in revealing the microstructural, morphological, physical, and chemical information of halide perovskites and their impact on associated optoelectronic devices. However, electron beam irradiation usually causes damage to these beam-sensitive materials, negatively impacting their device performance, and complicating this interpretation. Here, the electron microscopy and spectroscopy techniques are reviewed that are crucial for the understanding of the crystallization and microstructure of halide perovskites. In addition, special attention is paid to assessing and mitigating the electron beam-induced damage caused by these techniques. Since the halide perovskites are fragile, a protocol involving delicate control of both electron beam dose and dose rate, coupled with careful data analysis, is key to enable the acquisition of reliable structural and compositional information such as atomic-resolution images, chemical elemental mapping and electron diffraction patterns. Limiting the electron beam dose is critical parameter enabling the characterization of various halide perovskites. Novel methods to unveil the mechanisms of device operation, including charge carrier generation, diffusion, and extraction are presented in scanning electron microscopy studies combined with electron-beam-induced current and cathodoluminescence mapping. Future opportunities for electron-beam-related characterizations of halide perovskites are also discussed.

36 MATERIALS SCIENCE↗