Search NASA⌕ Search

SEARCH · Search NASA

Results for “circularity analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Methods for Assessing Opportunities for Ring Dam Pumped Storage Hydropower

There is growing interest in new pumped storage hydropower (PSH) deployment to provide a range of grid flexibility, reliability, and resiliency services under an evolving and uncertain future power sector. The National Laboratory of the Rockies develops open PSH resource assessment and cost modeling tools to help evaluate PSH deployment opportunities, and this report describes expansions to those tools to consider an additional PSH system configuration - ring-dam reservoirs built on flat topographical features that are constructed from roller-compacted concrete material. This reservoir type is common among current PSH proposals and requires new methods to identify sites with this reservoir geometry throughout the United States and characterize the associated dam cost. Cost characterization for ring dam reservoirs required collecting historical dam cost data for earthen, rockfill, and roller-compacted concrete dams and regressing equations that relate costs between alternative materials. The ring dam site identification algorithm follows a 5-step procedure to identify circular geometry reservoirs. Once ring dam reservoirs are identified, they are then paired with potential dry-gully reservoirs, and the full set of potential paired reservoirs is cost-optimized to produce a least-cost set of potential PSH sites with no overlapping reservoirs. The resulting analysis found 1,663 ring-dam to dry-gully systems in the contiguous United States that are lower cost than any overlapping dry-gully to dry-gully systems, 29 in Alaska, and none in Hawaii or Puerto Rico. These systems constitute 1.5 TW of capacity in the contiguous United States and nearly 29 GW in Alaska, demonstrating that under suitable topography and head, ring-dam systems can provide cost-effective PSH opportunities. The greatest density of these opportunities are found in the intermountain west where there are mesas and flat land at bases of mountain ranges, but continued work could incorporate additional site characteristics or consider more complex reservoir shapes to find additional PSH deployment opportunities.

13 HYDRO ENERGY↗
DOE OSTI2024

Structure analysis of the telomere resolvase from the Lyme disease spirochete Borrelia garinii reveals functional divergence of its C-terminal domain

Borrelia spirochetes are the causative agents of Lyme disease and relapsing fever, two of the most common tick-borne illnesses. A characteristic feature of these spirochetes is their highly segmented genomes which consists of a linear chromosome and a mixture of up to approximately 24 linear and circular extrachromosomal plasmids. The complexity of this genomic arrangement requires multiple strategies for efficient replication and partitioning during cell division, including the generation of hairpin ends found on linear replicons mediated by the essential enzyme ResT, a telomere resolvase. Using an integrative structural biology approach employing advanced modelling, circular dichroism, X-ray crystallography and small-angle X-ray scattering, we have generated high resolution structural data on ResT from B. garinii. Our data provides the first high-resolution structures of ResT from Borrelia spirochetes and revealed active site positioning in the catalytic domain. We also demonstrate that the C-terminal domain of ResT is required for both transesterification steps of telomere resolution, and is a requirement for DNA binding, distinguishing ResT from other telomere resolvases from phage and bacteria. These results advance our understanding of the molecular function of this essential enzyme involved in genome maintenance in Borrelia pathogens.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Production of bio-based lactones as monomers for a circular polymer economy

To create a circular plastics economy, new polymers are being developed that can be chemically recycled. Circular polyesters are of particular interest and to this end, lactones are ideal monomers. Here, this Review examines catalytic routes to convert diols, hydroxy acids, and dicarboxylic acids to lactones, focusing on the development of scalable, atom-economic, and energy-efficient conversions of bio-derived feedstocks. Free energy analysis is used to inform process choices, such as reactor type, reaction phase, and use of solvent. Catalyst design principles are summarized for both direct (bio-substrate to lactone) and indirect (bio-substrate to intermediate to lactone) routes. Finally, we summarize literature that shows that many lactone precursors are readily accessible from various metabolic and chemo-catalytic pathways. Transitioning to bio-based monomers offers an opportunity to reduce reliance on fossil carbon resources, but requires advanced catalytic processes informed by mechanistic insights.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Optimal Design of Food Packaging Considering Waste Management Technologies to Achieve Circular Economy

Plastic packaging plays a fundamental role in the food industry, avoiding food waste and facilitating food access. The increasing plastic production and the lack of appropriate plastic waste management technologies represent a threat to the environmental and human welfare. Therefore, there is an urgent need to identify sustainable packaging solutions. Circular economy (CE) promotes reducing waste and increasing recycling practices to achieve sustainability. In this work, we propose a CE framework based on multi-objective optimization, considering both economic and environmental impacts, to identify optimal packaging designs and waste management technologies. Using mixed-integer linear programming (MILP), techno-economic analysis (TEA), and life cycle assessment (LCA), this work aims to build the first steps in packaging design, informing about the best packaging alternatives and the optimal technology or technologies to process packaging waste. For the economic analysis, we consider the minimum increase in price (MIP) when adding recycling to the cost of each packaging solution, while for the environmental analysis, the greenhouse gas emissions impact was considered. A case study on ground coffee packaging is used to illustrate the proposed framework. The results demonstrate that the multilayer bag option is the most convenient when considering both the chosen economic and environmental impacts.

Life Cycle Analysis↗
DOE OSTI2026

A systematic analytical framework for multi-source municipal solid waste characterization for energy recovery

Advancing municipal solid waste (MSW) management from disposal-oriented practices toward circular, value-driven systems requires standardized methodologies capable of identifying material composition and resource recoverable potential at the point of generation. Despite extensive research, MSW characterization remains fragmented due to inconsistences in sampling methodologies, waste sorting categories, and temporal coverage across previous studies which limit cross-site comparability, reproducibility, and constrain the reliable evaluation of potential resource recovery pathways. This lack of consistency has hindered the development of a unified framework for MSW characterization and resource assessment. This study introduces a standardized, field-validated protocol for MSW sampling and composition analysis that ensures consistent, traceable data across diverse waste sources. The protocol integrates randomized spatial sampling, systematic material sorting, and controlled subsampling for multi-site and multi-season field campaigns. Validation included MSW collection from residential, grocery, restaurant, and school MSW streams across five U.S. states, including Maryland, Idaho, Virginia, Ohio, and Mississippi, to demonstrate the protocol’s ability to identify source-based composition patterns relevant to resource recovery applications. Grocery and restaurant streams were dominated by food waste and high-moisture organics, while school waste contained higher paper content and residential waste showed greater heterogeneity. Aggregation into energy-relevant fractions highlighted practical recovery pathways via anaerobic digestion or gasification, supporting data-driven planning, policy, and circular economy strategies for sustainable waste management across waste sources.

09 BIOMASS FUELS↗
DOE OSTI2025

Recycling Disassembled Automotive Plastic Components for New Vehicle Components: Enabling the Automotive Circular Economy

As the automotive industry increasingly relies on plastic components to meet fuel efficiency and emissions targets, the challenge of managing end-of-life vehicle (ELV) plastics continues to grow. Currently, more than 80% of ELV plastics in the U.S. are landfilled due to limited economic incentives and technical barriers to recycling. This study examines a mechanical recycling pathway for thermoplastic components disassembled from ELVs and assesses their usability for reintegration into new vehicle parts. Four representative materials were chosen based on material labels embedded in recovered parts and aligned with their virgin industrial equivalents: polypropylene (PP), 10% talc-filled PP (PP-T10), 20% talc-filled PP (PP-T20), and a 20% glass-/mineral-filled polyamide (PA6 + GF7 + MF13). The materials underwent shredding, drying, and injection molding before being characterized by particle size analysis, density measurement, thermal analysis (TGA, DSC), mechanical testing, and heat deflection temperature (HDT) evaluation. The results in this work indicated that minor differences in crystallinity were observed and small differences between model materials and ELV materials could have contributed to these changes. Mechanical testing revealed that neat polypropylene suffered a 15–20% reduction in stiffness and tensile strength, but talc-filled polypropylene and glass/mineral-filled nylon retained >90% of their modulus, strength, and heat deflection temperature values relative to virgin controls. Differences between virgin and ELV materials could have been attributed to use life degradation, contamination during use life, or even chemical/processing differences in model materials and ELV materials. However, these findings suggest that mechanically recycled, disassembled ELV plastics can retain sufficient structural performance to support circularity efforts in the automotive sector.

automotive recycling↗
DOE OSTI2026

Valorization of consolidated bioprocessing residues for bioplastics

This study demonstrates an organic solvent-free processing strategy to valorize consolidated bioprocessing (CBP) residues, from switchgrass and poplar biomass, into functional poly(butylene succinate) (PBS)-based biocomposites using high-shear homogenization (HSH). HSH transformed the switchgrass and poplar CBP residues (CBP-R) into fine, uniformly distributed particles and microfibers. The composites of PBS with homogenized switchgrass residues (H-CBP-R-SG) or homogenized poplar residues (H-CBP-R-P) at a 70/30 weight ratio exhibited improved processability and mechanical integrity, with the Young's modulus for the PBS/H-CBP-R-SG and PBS/H-CBP-R-P nearly doubling to 0.66 ± 0.07 GPa and 0.65 ± 0.04 GPa, respectively, compared to neat PBS (0.36 ± 0.02 GPa). Dynamic Mechanical Analysis (DMA) reveals a significant suppression of the tan δ peak magnitude, indicating that HSH-mediated physical activation facilitates stress transfer in composites typical of covalent chemical grafting systems. While the transition to a stiffness-dominated profile reduces ductility, the resulting composites exhibit the dimensional stability and resistance to thermal warping required for high-fidelity FDM 3D printing and injection molding. Beyond material performance, comprehensive techno-economic analysis (TEA) and life cycle assessment (LCA) confirmed that diverting CBP residues into composite products can improve the economic viability of the biorefinery without substantially increasing biorefinery global warming potential (GWP). At a 30 wt% blend ratio, incorporating residuals into PBS yielded a minimum selling price for the composite of $\$4.07$ per kg compared to the conventional bioplastic price of $\$5.00$ per kg. This approach aligns with circular bioeconomy principles by converting waste streams into value-added products. Furthermore, this innovative strategy addresses key challenges in bioplastic development, including cost, compatibility, and performance, while simultaneously advancing waste minimization strategies for sustainable manufacturing systems.

09 BIOMASS FUELS↗
DOE OSTI2026

Hyperfusogenic Mutations Destabilize the Postfusion Six-Helix Bundle of the Measles Virus Fusion Glycoprotein

Fusion of the host membrane and viral envelope by class I viral fusion proteins is driven by the assembly of a postfusion six-helix bundle formed through antiparallel interactions between N-terminal (HR1) and C-terminal (HR2) heptad-repeat regions. Although mutations in these regions of the measles virus (MeV) fusion (F) glycoprotein are known to promote neuropathogenic and hyperfusogenic phenotypes, their effects on postfusion core stability have not been systematically examined. Here, we combine peptide biophysics and X-ray crystallography to interrogate how mutations within the HR2 domain, present in native neuropathogenic MeV isolates (e.g., L454W and N462K) and laboratory-generated hyperfusogenic variants (e.g., L454M and T461A), influence postfusion 6HB assembly. Circular dichroism (CD) spectroscopy reveals that, with few exceptions, these mutations decrease postfusion core stability, despite their association with enhanced fusion activity. We also report the first crystal structure of the wild-type MeV postfusion core as well as structures of six hyperfusogenic variants, enabling high-resolution comparison of the molecular basis of destabilization. Structural analysis shows that these effects arise from localized perturbations to steric packing, hydrogen bonding networks, and helix-stabilizing interactions within HR2, while the overall 6HB architecture remains conserved. Together, these results indicate that hyperfusogenic mutations are not associated with stabilization of the postfusion state and are instead consistent with models in which hyperfusogenicity arises from a reduction in the energetic barrier to fusion, potentially through effects on prefusion stability or triggering efficiency. These findings establish key sequence-structure–stability relationships governing coiled-coil assembly and provide a framework for the design of HR1- and HR2-based fusion inhibitors.

Genetics↗
DOE OSTI2026

Bio-inspired alula-based winglet design for enhanced heat transfer in high temperature fin-and-tube heat exchangers

Fin-and-tube heat exchangers (FTHEs) are widely used for high-temperature flue-gas heat recovery, but their performance is often limited by wake regions and non-uniform fin-surface temperatures. This study proposes and numerically evaluates four bio-inspired longitudinal vortex generator (VG) configurations in a high-temperature FTHE with flue-gas inlet temperature ∼1230 K: double-delta, curved double-delta, alula, and a new curved-alula geometry. The reference fin is not hydraulically plain; it already incorporates leading-edge separation columns and convex protrusions, so the alula-type winglets are assessed as downstream add-ons acting on a strongly disturbed flow. In a second step, perforations (one, two and three circular holes) are introduced into the curved-alula VGs to further tailor the flow field. Three-dimensional simulations with the Shear Stress Transpor (SST) $k - ω$ model, temperature-dependent flue-gas properties and conjugate conduction are carried out for gas-side Reynolds numbers $Re_g ≈ 8.0$ x $10^2 - 3.6$ x $10^3$ (mass flow rates 0.5 – 2.5 g/s), and the designs are compared in terms of surface heat flux, Nusselt number, friction factor and hydrothermal performance factor (HTPF). For this already-promoted fin, the additional downstream winglets provide moderate, incremental hydrothermal gains. At the highest Reynolds number, the best non-perforated design (curved-alula) increases surface heat flux from 1630.9 to 1794.7 kW/m² (∼ 10 % gain) and the Nusselt number from 227.6 to 242.6 (∼ 7 % gain), while the friction factor rises from 0.26 to about 0.30, yielding HTPF values close to unity (∼ 0.9 – 1.0). Introducing circular perforations into the curved-alula winglets acts mainly as a wake-bleeding refinement: the three-hole configuration provides a heat flux of 1824.7 kW/m² and a pressure drop of 127.9 Pa, with HTPF in the range ∼ 1.03 – 1.14 and a small (∼ 1 – 3 %) improvement over the solid curved-alula design. Flow-field analysis shows that the perforated curved-alula VGs shrink tube-wake regions, thin the thermal boundary layer and homogenize the fin-surface temperature (outlet-gas temperature ∼ 510 – 520 K and fin-surface temperature ∼ 420 – 421 K for the three-hole case). An optimal flue-gas mass flow rate of ∼ 1 g/s ($Re_g ≈ 1.5$ x $10^3$) is identified, beyond which additional heat-transfer gains are offset by rapidly increasing pressure losses. Overall, the results highlight that initial fin geometry and VG placement are as important as VG shape: alula-based winglets are expected to yield larger relative gains on simpler flat-fin layouts or when positioned closer to the fin leading edge and tube

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

Criteria for Grid-Forming Inverters Transitioning Between Current Limiting Mode and Normal Operation

Here, this letter focuses on the fault recovery analysis of inverters using multi-loop droop based grid-forming control, taking into account different current limiting strategies. A criterion is proposed to determine when the inverter can exit the current limiting mode after fault clearance. The theoretical findings are verified through electromagnetic transient simulations using the direct (d)-axis priority-based current limiting method, circular current limiting method, and virtual impedance method.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2025

Contaminant Investigation and Pre‐Processing Opportunities for Textile‐To‐Textile Recycling

Millions of metric tons of textiles are landfilled or incinerated each year in the United States, with less than 1% of textiles recycled into new clothing or fabrics. To counter this trend, a growing number of companies and researchers are exploring how a circular economy can be applied to support textile‐to‐textile recycling. A significant barrier they face comes down to quickly and efficiently extracting pure feedstock material from post‐consumer garments that feature a mix of natural and synthetic fibers. Textile recyclers prefer pure feedstocks, as working with mixed sources typically means lower throughput, higher risk of equipment failure, and diminished business margins. To facilitate a circular economy for textiles, methods, and technologies are needed that can efficiently separate out materials and contaminants from end‐of‐life textiles to increase the flow of pure feedstocks to recyclers. This paper summarizes findings from interviews with a cross section of textile recyclers and from a review of literature to define basic feedstock requirements. In addition to our qualitative research, we deconstruct a bale of post‐consumer textiles and analyze them using computer‐vision imaging, Fourier transform infrared spectroscopy (FTIR), and machine learning. The resulting data are used to set system‐level design inputs for an automated contaminant removal system to process post‐consumer clothing into appropriate feedstocks for recycling. To set the system's levels for automated real‐time near‐infrared analysis, we identify the minimum percentage of primary material that any single garment in a load of used clothing must contain for the average of the full output stream to meet the target purity levels of recyclers. Here, the envisioned automated system can also address undesirable trace materials that might contaminate the processed stream by using imaging cameras coupled with artificial intelligence to identify sections of clothing for de‐trimming. Proof‐of‐concept machine learning algorithms are evaluated to locate and identify trims or garment areas with hidden contaminant materials. Integrating these methods into automated textile cutting systems can provide a cost‐effective means for increasing feedstock purity from used clothing, which can advance circularity for textiles by helping recyclers to reach production volumes and quality targets that were not possible solely with manual dismantling operations.

Parsons, Ryan [Rochester Institute of Technology, ↗
DOE OSTI2025

Characterisation and comparative analysis of mitochondrial genomes of false, yellow, black and blushing morels provide insights on their structure and evolution

Morchella species have considerable significance in terrestrial ecosystems, exhibiting a range of ecological lifestyles along the saprotrophism-to-symbiosis continuum. However, the mitochondrial genomes of these ascomycetous fungi have not been thoroughly studied, thereby impeding a comprehensive understanding of their genetic makeup and ecological role. In this study, we analysed the mitogenomes of 30 Morchellaceae species, including yellow, black, blushing and false morels. These mitogenomes are either circular or linear DNA molecules with lengths ranging from 217 to 565 kbp and GC content ranging from 38% to 48%. Fifteen core protein-coding genes, 28–37 tRNA genes and 3–8 rRNA genes were identified in these Morchellaceae mitogenomes. The gene order demonstrated a high level of conservation, with the cox1 gene consistently positioned adjacent to the rnS gene and cob gene flanked by apt genes. Some exceptions were observed, such as the rearrangement of atp6 and rps3 in Morchella importuna and the reversed order of atp6 and atp8 in certain morel mitogenomes. However, the arrangement of the tRNA genes remains conserved. We additionally investigated the distribution and phylogeny of homing endonuclease genes (HEGs) of the LAGLIDADG (LAGs) and GIY-YIG (GIYs) families. A total of 925 LAG and GIY sequences were detected, with individual species containing 19–48HEGs. These HEGs were primarily located in the cox1, cob, cox2 and nad5 introns and their presence and distribution displayed significant diversity amongst morel species. These elements significantly contribute to shaping their mitogenome diversity. Overall, this study provides novel insights into the phylogeny and evolution of the Morchellaceae.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Feedback, physics, and forecasts: The emerging paradigm of machine learning-driven battery research

Machine learning (ML) is reshaping how we understand, predict, and optimize electrochemical systems. In batteries, ML accelerates discovery across chemistry, design, and operation by transforming massive experimental and simulated datasets into predictive, interpretable models. This review consolidates a decade of progress in ML-driven battery innovation, from early-cycle feature extraction to operando image analysis and physics-informed modeling. We categorize approaches by data domain and physical fidelity, emphasizing interpretable ML for diagnostics, reinforcement learning for control, and multi-objective optimization for lifetime extension strategies. Additionally, we demonstrate how integrated models accelerate discovery, reduce testing time, and guide sustainable design. Economic analyses furthermore illustrate how these advances can lower cost per cycle and improve circularity. Together, these developments chart a path toward self-optimizing, sustainable battery technologies.

artificial intelligence↗
DOE OSTI2026

Acetate-based biological platforms: Bridging carbon dioxide utilization and high-value bioproduct production in oleaginous yeasts

Acetate is emerging as a promising two-carbon substrate in the circular bioeconomy, bridging the gap between single-carbon sources and high-value biofuels and bioproducts. This review examines the key pathways for acetate production, including the electrochemical reduction of carbon dioxide, syngas fermentation, and biological acetogenesis. It focuses on acetate metabolism in oleaginous yeasts, such as Yarrowia lipolytica and Rhodotorula toruloides, which efficiently convert acetate-derived acetyl-CoA units into diverse bioproducts such as lipids, fatty alcohols, triacetic acid lactone, and carotenoids. Recent advances in metabolic engineering, transcriptomics, and metabolic flux analysis have improved the understanding of acetate assimilation in these organisms, thereby increasing their potential for industrial applications. In addition, the feasibility of a biological gas-to-liquid platform that utilizes acetate as a central intermediate for scalable biomanufacturing is discussed. Integrating acetate utilization with sustainable production strategies offers a promising path to advance the bio-based economy. Using acetate as a versatile metabolic intermediate enables the conversion of industrial emissions into biofuels and bioproducts while avoiding the energetic and toxicity constraints associated with direct fermentation of gaseous substrates.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Spatial Optimization of Multiscale Biorefinery Deployment for a Diversified Bioeconomy in the United States

Strategic biorefinery siting is critical for a diversified bioeconomy, yet industry, policy, and research often focus on either large-scale biofuel plants or smaller-scale specialty bioproduct facilities, with limited coordination across scales. We address this gap by modeling biorefinery deployment spanning a 28-fold difference in capacity. We developed an open-source, spatially explicit framework integrating techno-economic analysis with logistics and refinery cost surrogate models to evaluate multiscale miscanthus-derived biorefineries across the rainfed U.S. for the production of ethanol, succinic acid, lactic acid, potassium sorbate, and acrylic acid. Overall costs change little as feedstock density increases, while transport distances decrease by ∼30 to 67% (∼100 km) and siting flexibility improves. Specifically, a 5-fold feedstock density increase (2% to 10% of suitable land) reduces minimum selling prices by <10% (e.g., 0.27 USD·gal –1 for ethanol). This limited economic sensitivity suggests dense planting is not required for competitive deployment, particularly for smaller-scale facilities. Representing collection areas as irregular rather than circular expands the feasible space under low-density scenarios. While large-scale refineries anchor regional supply chains, smaller facilities retain spatial flexibility even when large refineries are established. These findings highlight the importance of spatial representation and multiscale coordination for robust, regionally tailored biomanufacturing networks to advance renewable carbon integration without extensive land conversion.

biorefinery siting↗
DOE OSTI2025

Comparative techno-economic analysis of synthetic renewable natural gas production via reactive CO 2 capture and conversion

Reactive CO 2 capture and conversion (RCC) is an emerging carbon management strategy that integrates CO 2 capture and conversion and avoids intermediate CO 2 purification. In this study, we design an RCC process to capture atmospheric CO 2 and react it with renewable hydrogen to produce synthetic renewable natural gas (SRNG), which serves as a carbon-neutral energy source and a chemical form of long-duration renewable energy storage. We assess the technological potential of RCC through process modeling, techno-economic, carbon footprint, and sensitivity analyses. Our findings demonstrate that RCC offers energy savings and comparable cost to separated capture and conversion processes. The cost is dominated by renewable hydrogen and material replacement cost. SRNG produced via RCC is competitive with existing low-carbon natural gas technologies and presents a promising low-cost option for long-duration energy storage. This work highlights the potential for deploying RCC technologies within a circular carbon economy and the scientific and technical challenges that must be overcome for material and technology developers.

03 NATURAL GAS↗
DOE OSTI2026

Langevin and Fokker-Planck analyses for diffusion-mediated passing of circular and discorectangular species in two-dimensional channels

The propensity for pairs of diffusing species to pass each other within narrow channels or pores is of basic interest as a first-passage-type problem. It is also of relevance for solution-phase transport in nanoporous materials, and in particular for catalytic conversion reactions where high yield requires that product species can efficiently pass reactant species to exit the pores. Here, we analyze a two-dimensional model with nonoverlapping circular and discorectangular species confined to a rectangular channel, and where passing is mediated by Brownian dynamics in an implicit solvent. For narrower channels where passing is still possible, the discorectangle must align with the channel to pass the circular species. Behavior of the passing propensity, 𝑃, can be assessed by strongly damped Langevin simulations, or within an equivalent Fokker-Planck equation (FPE) formalism. The latter corresponds to a diffusion problem in a “higher-dimensional channel” with a constriction. We assess the variation of the passing propensity, 𝑃, for a broad range of channel width including its scaling just above the threshold where passing is sterically blocked. Analysis of 𝑃 versus the rotational diffusion coefficient 𝐷 𝑟 of the discorectangle reveals a significant decrease in 𝑃 for lower 𝐷 𝑟 for moderate channel width. This prompts a direct analysis of the regime where 𝐷 𝑟 → 0 , for which the FPE can be reduced to a three-dimensional diffusion problem, precise analysis of which is facilitated by adaptive-mesh finite element methods. The dependence of 𝑃 on the aspect ratio of the discorectangle is also assessed.

Rahman, Md Khaledur [Ames Laboratory (AMES), Ames,↗
DOE OSTI2025

AL-CRADA-2025-01 Final Report: American-Made Wind Turbine Materials Recycling Prize Accelerate! Phase 2

This report summarizes the Phase 2 achievements of the Wind Turbine Materials Recycling Prize project led by Critical Materials Recycling (CMR) in partnership with Ames National Laboratory. The team demonstrated the technical feasibility and economic viability of recovering and reusing rare-earth Nd-Fe-B magnets from end-of-life (EOL) wind turbine generators. Through mechanical disassembly, demagnetization, and precision processing, magnets were harvested and characterized to assess structural, compositional, and magnetic properties. Results showed that recovered magnets performed on par with commercial-grade counterparts, enabling their integration into actuator and motor prototypes without redesign. System-level modeling and finite-element simulations validated operational performance, while Life Cycle Cost (LCC) analysis revealed up to 20% material cost savings and 2–3% reductions in overall motor system costs. Life Cycle Assessment (LCA) further confirmed substantial environmental benefits, including a ~94% reduction in global warming potential relative to virgin magnet production. The project’s success was enabled by a tightly integrated partnership between industry and national lab experts, illustrating a viable path for domestic magnet-to-magnet recycling. These findings support a scalable, circular solution for rare-earth material recovery, reducing dependence on imported critical minerals and advancing sustainable clean energy technologies.

Lograsso, Thomas [Ames Laboratory (AMES), Ames, IA↗