Search NASA⌕ Search

SEARCH · Search NASA

Results for “class”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

FleetREDI: Mail Delivery Class 6 Propane Trucks

Capturing real-world data is critical to reducing the barriers to technology advancement for commercial vehicles. FleetREDI’s insights provide detailed duty cycle information and highlight unique aspects of the given dataset. Each insight delivers a quick look at the collected data by summarizing the operation and identifying key findings of the initial analysis. This FleetREDI insight explores propane and diesel Class 6 mail delivery trucks. Propane-powered commercial vehicles can achieve the same duty cycles and match the power, acceleration, and cruising speeds of conventionally fueled vehicles. The primary goal of the project was to demonstrate alternative fuel vehicles in a mail transport application and evaluate the viability of propane as a cost-effective alternative to conventional diesel trucks. ![FleetREDI clean delivery trucks](FleetREDI-clean-delivery.jpg)

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2026

FleetREDI: Mail Delivery Class 6 Propane Trucks

Capturing real-world data is critical to reducing the barriers to technology advancement for commercial vehicles. FleetREDI’s insights provide detailed duty cycle information and highlight unique aspects of the given dataset. Each insight delivers a quick look at the collected data by summarizing the operation and identifying key findings of the initial analysis. This FleetREDI insight explores propane and diesel Class 6 mail delivery trucks. Propane-powered commercial vehicles can achieve the same duty cycles and match the power, acceleration, and cruising speeds of conventionally fueled vehicles. The primary goal of the project was to demonstrate alternative fuel vehicles in a mail transport application and evaluate the viability of propane as a cost-effective alternative to conventional diesel trucks. ![FleetREDI clean delivery trucks](FleetREDI-clean-delivery.jpg)

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

TCO Analysis Approach and Regional Analysis of dWPT for Class 8 Tractors

Dynamic Wireless Power Transfer (dWPT) is a method by which battery electric vehicles (BEVs) can charge their battery while traveling on the road without the need for a physical conductive connection to the power source. dWPT has been proposed as a strategy to enable a reduction in vehicle battery capacity and associated mass and cost. In this slide deck presented at the EVs@Scale Consortium - Wireless Power Transfer Pillar Deep-Dive Meeting on November 11th, 2023, NREL provides results from an evaluation of dWPT using data from Class 8 tractors driving in the Atlanta Metro Area. NREL selected data for archetypal days representing local, regional, and long-haul trips, defined according to trip length, that included travel on primary roadways. EVI-InMotion (Electric Vehicle Infrastructure - InMotion), a systems planning and optimization tool developed at NREL, was used to evaluate dWPT performance assuming dWPT charging on 120 road segments for a total roadway lane distance of 2,365 miles. The EVI-InMotion results and representative day drive cycles were analyzed with NREL's T3CO (Transportation Technology Total Cost of Ownership) tool to estimate the total cost of ownership (TCO) for scenarios comprising two model years - 2030 and 2040 - and two technology progress cases. TCO was calculated for diesel, fuel cell electric, BEVs with batteries sized assuming no dWPT capabilities, and 200kWh BEVs with dWPT installed. This analysis finds that en-route stationary charging frequency and downtime when not on electrified roadways are the main contributors to TCO for the dWPT vehicles and that these vehicles can achieve cost parity with FCEVs at low electricity costs. Based on the scenario assumptions used here, low electricity costs would further help the cost parity with diesel vehicles in regional and long-haul cases due to stationary fueling downtime. This presentation also concludes that key factors affecting the parity potential of dWPT-capable vehicles include more extensive dWPT road coverage, higher en-route charging power, less expensive power batteries, and higher hydrogen or diesel fuel costs.

ADVANCED PROPULSION SYSTEMS,ENERGY PLANNING, POLIC↗
DOE OSTI2024

Summary of FY2024 Experimental Results to Support Development of New Inelastic Material Models and Validation of Section III, Division 5, Class A Design Rules

To address the data gap crucial for updating existing viscoplastic constitutive material models for the Class A materials in the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code, Section III, Division 5, High Temperature Reactors (ASME, 2023) for inelastic design analysis, Oak Ridge National Laboratory (ORNL) conducted experimental studies on Alloy 800H and Alloy 617 across a range of temperatures up to their maximum temperature limits in Section III, Division 5. The studies aim to characterize the materials' deformation behavior under both strain-controlled mechanical cyclic loading and thermal cycling conditions. This report summarizes ORNL's FY 2024 experimental findings on Alloy 800H and Alloy 617, focusing on pure fatigue tests, cyclic stress-strain curves, thermomechanical fatigue experiments, and verification of the high temperature cyclic damage summation design rules.

36 MATERIALS SCIENCE↗
DOE OSTI2024

ASME Section III, Division 5, Class A 100,000-hour design data for Alloy 709

This report documents the 100,000 hour, Class A ASME design material data for Alloy 709 based on the extensive Department of Energy, Office of Nuclear Energy, Advanced Reactor Technologies qualification test campaign. This report includes design tensile properties, creep rupture data, allowable stresses, isochronous stress-strain curves, buckling charts, and a few additional miscellaneous pieces of design data. Companion work at Oak Ridge National Laboratory and Argonne National Laboratory provide design cyclic data --- fatigue charts and creep-fatigue diagrams --- and an inelastic constitutive model. This work substantially completes the ASME data package for the Alloy 709 Code Case, though the design data will continue to updated as the final tests finish. This report also compares the design performance of Alloy 709 against that of 316H stainless steel to provide a reference for the improved high temperature strength of 709 compared to a reference material for sodium fast reactor construction.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Megawatt-Class, High-Voltage SiC Power Electronics Converters for Advanced Manufacturing with Grid Support Services

DE-EE0009135 aimed to push the 10kV SiC MOSFET based power electronics to 3-phase 13.8kV 10MW to be used as a Megawatt Class Medium-Voltage Power Conditioning Systems – PCS – to enable “Resilient Distribution through Grid-dispatching and Uninterrupted Quality Power to Manufacturing Facilities” during transitory grid disturbances. As a stretch to those goals, Eaton added the load power peak shaving opportunity.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2025

Alloy 625 Qualification Pathway for ASME Section III Division 5 Class A construction

The American Society of Mechanical Engineers Boiler and Pressure Vessel Code Section III Division 5 provides construction and inspection rules to ensure the safety of nuclear components operating at elevated temperatures, defined as those operating above 700°F (370°C) or 800°F (425°C), depending on the material type. At present, there are six materials approved for Class A (high safety significance) component construction under ASME BPVC Section III Division 5. Out of these six materials, five materials are steels or iron-based alloys and one material, Alloy 617, is a nickel alloy. Nickel alloys are stronger than steels; however, Alloy 617 consists of 10-15% cobalt, and activation is a concern under irradiation. Therefore, there is a need to qualify new nickel alloy with lower cobalt content. Alloy 625 is one candidate which has similar mechanical properties at elevated temperature compared to Alloy 617 and has a maximum of 1% cobalt. Although Alloy 625 material properties have been developed in the past to support allowable stress development under ASME Section II, new test results would be needed to qualify this material for elevated temperature component construction under ASME Section III Division 5. The purpose of this report is to describe a path towards developing a Nuclear Code Case to qualify Alloy 625 (UNS N06625; Grade 1 and Grade 2) for elevated temperature nuclear use in accordance with the ASME BPVC rules. This report reviews the existing database on Alloy 625, presents proposed test campaign, and discusses potential paths for accelerating the accelerated material qualification process.

36 - MATERIALS SCIENCE↗
DOE OSTI2025

Security Analysis of a Class of Spread Spectrum Systems Presentation

A method of adding physical layer security to a class of spread spectrum systems has been recently proposed. In this paper, we look into the rate at which an eavesdropper may gain information about the system to decipher the data symbols. The Shannon mutual information is used to measure the rate of information that may be gained by an eavesdropper. The k-nearest neighbors (k-NN) method is used to obtain estimates of relevant entropy values, which will then be used to quantify the rate of information recovery as more data is transmitted. It turns out that such information recovery requires the adoption of special methods that avoid any destructive bias in the estimates. Details of these methods are also presented.

97 - MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Security Analysis of a Class of Secured Spread Spectrum Systems

Abstract—A method of adding physical layer security to a class of spread spectrum systems has been recently proposed. In this paper, we look into the rate at which an eavesdropper may gain information about the system to decipher the data symbols. The Shannon mutual information is used to measure the rate of information that may be gained by an eavesdropper. The k-nearest neighbors (k-NN) method is used to obtain the estimates of relevant entropy values which will be then used to quantify the rate of information recovery as more data are being transmitted. It turns out that such information recovery requires adoption of special methods that avoid any destructive bias in the estimates. Details of these methods are also presented.

97 - MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Optimizing Alabama’s CO 2 Storage in Shelby County (Project OASIS) Milestone 6.0: Evaluation of Class VI Readiness

Introduction. Project OASIS is approximately 30 miles southeast of Birmingham, Alabama, and approximately 5 miles north-northwest of Alabama Power Company's Plant Gaston. Geologically, the Project area is in the Alabama fold and thrust belt province. This work builds on the initiatives of the Southeast Regional Carbon Utilization and Storage Acceleration Partnership (SECARB-USA, DE-FE0031830) that identified nearly 500 million metric tonnes of CO 2 emitted on an annual basis that is not collocated with prospective storage geology (the Coastal Plain of the Southeastern US in this context). This observation suggests costly investments in connective infrastructure (e.g., pipelines) or exploratory well drilling campaigns to identify CO 2 storage opportunities in under explored areas. While not traditionally thought of for saline storage, these studies suggest that storage prospects in the Valley and Ridge Province occur in relatively flat lying structural panels between thrust faults. For the Project OASIS region, available geologic studies related to hydrocarbon exploration suggest that Cambro-Ordovician carbonates and Cambrian clastic units offer multiple potential storage intervals, and that regional confining systems are present, such as the tectonically thickened Floyd-Parkwood Shale. The Project OASIS surface property is owned by a timber and land stewardship company, The Westervelt Company, Inc., who worked with the Project Team to select and prepare adequate sites for geologic assessment. The purpose of drilling the Westover Stratigraphic Test Well #2 was to collect geologic data to model the feasibility of commercial scale CO 2 injection and storage in an under explored region. This initiative benefits the regions emitters as the data generated from this study can inform their own internal decision making. The field program included geological and geophysical evaluations, reservoir engineering analyses, and risk assessments. This report evaluates existing data, as well as a variety of modeling scenarios to evaluate project readiness. Importantly, the impact of this study is not limited to Alabama as there are numerous large emitters throughout Appalachia, in similar geologic settings, contemplating their decarbonization options.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2024

Estimating Electrification Potential for Class 8 Regional-Haul Trucks

This one-page highlight details the key takeaways from a project that utilized NREL's Fleet Research, Energy Data, and Insights (FleetREDI) data analysis pipeline. As part of the North American Council for Freight Efficiency's (NACFE's) Run on Less Depot data workshop, NREL sought to understand how Tesla semi-trucks would perform in real-world regional haul applications. Analysis reveals that the modeled Tesla trucks, with an average efficiency of 1.78 kWh/mi, struggle to achieve full operational coverage using current battery and charging configurations assuming operations remain unchanged. However, in an extreme case where ubiquitous charging exists, 100% EV coverage is possible for the given drive cycles. These findings highlight the trade-off between battery size and charge rate in electrification potential and emphasize the necessity for advancements in charging infrastructure to enable electric trucks for regional haul operations.

ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2024

Solving a class of infinite-dimensional tensor eigenvalue problems by translational invariant tensor ring approximations

Here, we examine a method for solving an infinite-dimensional tensor eigenvalue problem Hx = λx, where the infinite-dimensional symmetric matrix H exhibits a translational invariant structure. We provide a formulation of this type of problem from a numerical linear algebra point of view and describe how a power method applied to e -Ht is used to obtain an approximation to the desired eigenvector. This infinite-dimensional eigenvector is represented in a compact way by a translational invariant infinite Tensor Ring (iTR). Low rank approximation is used to keep the cost of subsequent power iterations bounded while preserving the iTR structure of the approximate eigenvector. We show how the averaged Rayleigh quotient of an iTR eigenvector approximation can be efficiently computed and introduce a projected residual to monitor its convergence. In the numerical examples, we illustrate that the norm of this projected iTR residual can also be used to automatically modify the time step to ensure accurate and rapid convergence of the power method.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2026

Novel PtNi single-atom–nanocluster (SA–NC) ensembles promote Tafel kinetics and ampere-class AEM hydrogen evolution

The development of efficient, durable, and low-PGM electrocatalysts for the hydrogen evolution reaction (HER) in alkaline media is critical for next-generation electrolysis technologies. We report a facile two-step synthesis of highly dispersed PtNi and PtNi-nitride nanoclusters (NCs) (~2.3 nm) with ultralow Pt content (0.5 at.%) anchored on N-doped Vulcan carbon. Structural and compositional characterization via XAS, XPS, HAADF-STEM, HRTEM, and EDS mapping established key structure–activity relationships across varying Pt/Ni ratios and pyrolysis temperatures. The Pt0.5Ni0.5/C-750 catalyst, an ensemble of PtNi M-N-C type single-atom (SA) moieties with neighboring PtNi nanoclusters (NC), exhibited superior HER performance in alkaline media, achieving overpotentials of 30, 115, and 210 mV at 10, 100, and 500 mA cm−2, respectively. Despite at a lower Pt content, this novel SA–NC ensemble outperformed commercial Pt/C by ~36%. A standardized literature comparison with contemporary Pt- and Ru-doped analogues reveals the as-prepared Pt0.5Ni0.5/C-750 to sit at the apex of Tafel-limited kinetics and low overpotential at 100 mA cm−2. Tafel-limited Tafel slopes in both alkaline and acidic regimes confirm favorable proton recombination kinetics. Mass activities at 200 mV reached 13.8 and 18.84 A mgPt−1 in alkaline and acidic media, respectively. However, excessive nitridation (e.g., at 650 °C) adversely altered Pt electronic structure and HER kinetics. While Ni enhanced alkaline HER, acidic HER favored Ni-free analogues. Pt0.5Ni0.5/C-750 also demonstrated robust temperature responsiveness and 300-h operational stability at high current densities (0.5–1.0 A cm−2) in MEA tests. This work presents a scalable strategy for designing thermally responsive, durable, and compositionally tunable NC catalysts with neighboring SA moieties for alkaline electrolysis.

AEMWE↗
DOE OSTI2025

Development of a River Dynamical Core for E3SM to simulate compound flooding on Exascale-class heterogeneous supercomputers

Flooding events pose significant risk to human life, property, and infrastructure. Physically-consistent quantification of altered flood risks in global models requires hyper-resolution (~1 km) or fine flood simulations using two-dimensional (2D) physics schemes, both of which are unavailable in the current generation Earth System Models. Here, in this work, we have developed the River Dynamical Core (RDycore), which is an open-source, 2D shallow water equation (SWE) library for the U.S. Department of Energy's Energy Exascale Earth System Model (E3SM). RDycore uses PETSc and libCEED libraries that allows it to run efficiently on CPUs and GPUs, as well as select a time-integration algorithm at runtime without requiring any code modifications. RDycore achieves spatial error convergence rates for problems with analytical and manufactured solutions similar to those reported previously in the literature, or consistent with the implemented first-order spatial discretization scheme. RDycore's accuracy in predicting flooding for a well-studied dam break problem is comparable to existing SWE models. For a problem with 471 million grid cells, RDycore achieves a speedup of 6.6x and 7.6x on GPUs compared to CPUs when using 320 compute nodes on DOE's Perlmutter and Frontier supercomputers, respectively. The one-way coupling of the RDycore library within E3SM is demonstrated by performing multiple 5-day flooding simulations during Hurricane Harvey driven by five precipitation datasets. The E3SM--RDycore simulations at 30 m spatial resolution accurately simulate maximum water height during the hurricane when benchmarked against a previously published study and achieve a speedup of 15x (Perlmutter) and 21x (Frontier) on GPUs relative to CPUs. The work presented here is the foundational step in providing hardware and algorithmic portability framework for simulating kilometer-scale river dynamics within E3SM.

Flood Simulation↗