Search NASA⌕ Search

SEARCH · Search NASA

Results for “cloud vertical structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Using AI/ML to Address Satellite Cloud Remote Sensing Challenges

Various AI/ML tools, employed within the Clouds and the Earth's Radiant Energy System (CERES) Satellite Cloud and Radiation Property retrieval System (SatCORPS) project, are being used to mitigate satellite radiance artifacts and thereby yield more accurate cloud and radiation data products. Neural network and K-nearest neighbor approaches have been developed that enable us to better address common passive satellite remote sensing challenges, such as corrupted imagery, day/night cloud property discontinuities, solar terminator artifacts, inadequate knowledge of the land surface emission temperature (i.e., skin temperature), and poor assumptions about vertical cloud structure, that have otherwise proven difficult to solve using more conventional methods. Fixing these problems promotes a more consistent Earth radiation budget record. These efforts demonstrate effective use of AI/ML architecture to exploit complex, multivariate predictor relationships and produce usable output at satellite spatial and temporal resolutions that would otherwise be ignored or have large biases.

Benjamin Scarino↗
NASA NTRSDate not supplied

Ice-Over-Water Cloud Identification in an Artificial Neural Network Approach

An artificial neural network (ANN) algorithm, employing several Aqua MODIS channels, the retrieved cloud phase and total cloud visible optical depth, and temperature and humidity vertical profiles is trained to detect multilayer (ML) ice-over-water cloud systems identified by matched 2008 CloudSat and CALIPSO (CC) data. The trained MLANN was applied to 2009 MODIS data resulting in combined ML and single layer detection accuracies of 87% (89%) and 86% (89%) for snow-free (snow-covered) regions during the day and night, respectively. When corrected for the viewing-zenith-angle dependence of each parameter, the ML fraction detected is relatively invariant across the swath. Compared to the CC ML variability, the MLANN is robust seasonally and interannually, and produces similar distribution patterns over the globe, except in the polar regions. Additional research is needed to conclusively evaluate the VZA dependence and further improve the MLANN accuracy. This approach should greatly improve the monitoring of cloud vertical structure using operational passive sensors.

MODIS↗
NASA NTRS2013

Vertical Structure of Ice Cloud Layers From CloudSat and CALIPSO Measurements and Comparison to NICAM Simulations

The shape of the vertical profile of ice cloud layers is examined using 4 months of CloudSat and Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) global measurements taken on January, April, July, and October 2007. Ice clouds are selected using temperature profiles when the cloud base is located above the 253K temperature level. The obtained ice water content (IWC), effective radius, or extinction coefficient profiles are normalized by their layer mean values and are expressed in the normalized vertical coordinate, which is defined as 0 and 1 at the cloud base and top heights, respectively. Both CloudSat and CALIPSO observations show that the maximum in the IWC and extinction profiles shifts toward the cloud bottom, as the cloud depth increases. In addition, clouds with a base reaching the surface in a high-latitude region show that the maximum peak of the IWC and extinction profiles occurs near the surface, which is presumably due to snow precipitation. CloudSat measurements show that the seasonal difference in normalized cloud vertical profiles is not significant, whereas the normalized cloud vertical profile significantly varies depending on the cloud type and the presence of precipitation. It is further examined if the 7 day Nonhydrostatic Icosahedral Atmospheric Model (NICAM) simulation results from 25 December 2006 to 1 January 2007 generate similar cloud profile shapes. NICAM IWC profiles also show maximum peaks near the cloud bottom for thick cloud layers and maximum peaks at the cloud bottom for low-level clouds near the surface. It is inferred that oversized snow particles in the NICAM cloud scheme produce a more vertically inhomogeneous IWC profile than observations due to quick sedimentation.

Ham, Seung-Hee↗
NASA NTRS2005

Aura MLS Cloud Measurements: First-Year Results

Aura MLS provides the first vertical upper tropospheric cloud profiling from space, enabling global survey of the vertical structure of cloud systems, with seasonal and geographical variations, needed to evaluate the way clouds are parameterized in global models, thereby contributing to the understanding of cloud-climate feedbacks, and improved weather and climate predictions. The vertical structure of cloud systems is fundamentally important for understanding how clouds affect both their regional and large-scale atmospheric and radiative environments. The regional cloud profiles provide a critical tests of important parameterizations that enable the calculation of radiative flux profiles and heating rates throughout the atmospheric column, which in turn also regulates the water and energy cycles in the upper troposphere

Microwave Limb Sounder (MLS)↗
NASA NTRS2001

ICESat's Laser Measurements of Polar Ice, Atmosphere, Ocean, and Land

The Ice, Cloud and Land Elevation Satellite (ICESat) mission will measure changes in elevation of the Greenland and Antarctic ice sheets as part of NASA's Earth Observing System (EOS) of satellites. Time-series of elevation changes will enable determination of the present-day mass balance of the ice sheets, study of associations between observed ice changes and polar climate, and estimation of the present and future contributions of the ice sheets to global sea level rise. Other scientific objectives of ICESat include: global measurements of cloud heights and the vertical structure of clouds and aerosols; precise measurements of land topography and vegetation canopy heights; and measurements of sea ice roughness, sea ice thickness, ocean surface elevations, and surface reflectivity. The Geoscience Laser Altimeter System (GLAS) on ICESat has a 1064 nm laser channel for surface altimetry and dense cloud heights and a 532 nm lidar channel for the vertical distribution of clouds and aerosols. The accuracy of surface ranging is 10 cm, averaged over 60 m diameter laser footprints spaced at 172 m along-track. The orbital altitude will be around 600 km at an inclination of 94 deg with a 183-day repeat pattern. The onboard GPS receiver will enable radial orbit determinations to better than 5 cm, and star-trackers will enable footprints to be located to 6 m horizontally. The spacecraft attitude will be controlled to point the laser beam to within +/- 35 m of reference surface tracks at high latitudes. ICESat is designed to operate for 3 to 5 years and should be followed by successive missions to measure ice changes for at least 15 years.

Zwally, H. J.↗
NASA NTRS2003

ICESat's Laser Measurements of Polar Ice, Atmosphere, Ocean, and Land

NASA's Ice, Cloud and Land Elevation Satellite (ICESat) mission is designed to measure changes in elevation of the Greenland and Antarctic ice sheets beginning in January 2003. Time-series of elevation changes will enable determination of the present- day mass balance of the ice sheets, study of associations between observed ice changes and polar climate, and estimation of the present and future contributions of the ice sheets to global sea level rise. Other scientific objectives of ICESat include: global measurements of cloud heights and the vertical structure of clouds and aerosols; precise measurements of land topography and vegetation canopy heights; and measurements of sea ice roughness, sea ice thickness, ocean surface elevations, and surface reflectivity. The Geoscience Laser Altimeter System (GLAS) on ICESat has a 1064 nm laser channel for surface altimetry and dense cloud heights and a 532 nm lidar channel for the vertical distribution of clouds and aerosols. Differences between the characteristics of laser and radar altimetry, such as effective depth of the backscattered signal, elevation accuracy, and footprint location, and their relevance to inter-relating measurements from ERS, Envisat, ICESat, and Cryosat are discussed. Preliminary ICESat results obtained during the calibration and validation period of ICESat are described. ICESat is designed to operate for 3 to 5 years and should be followed by successive missions to measure ice changes for at least 15 years.

Zwally H. Jay↗
NASA NTRS2003

ICESat's Laser Measurements of Polar Ice and Atmospheres

NASA's Ice, Cloud and Land Elevation Satellite (ICESat) mission is designed to measure changes in elevation of the Greenland and Antarctic ice sheets beginning in January 2003. Time-series of elevation changes will enable determination of the present- day mass balance of the ice sheets, study of associations between observed ice changes and polar climate, and estimation of the present and future contributions of the ice sheets to global sea level rise. Other scientific objectives of ICESat include: global measurements of cloud heights and the vertical structure of clouds and aerosols; precise measurements of land topography and vegetation canopy heights; and measurements of sea ice roughness, sea ice thickness, ocean surface elevations, and surface reflectivity. The Geoscience Laser Altimeter System (GLAS) on ICESat has a 1064 nm laser channel for surface altimetry and dense cloud heights and a 532 nm lidar channel for the vertical distribution of clouds and aerosols. Differences between the characteristics of laser and radar altimetry, such as effective depth of the backscattered signal, elevation accuracy, and footprint location, and their relevance to inter-relating measurements from ERS, Envisat, ICESat, and Cryosat are discussed. Preliminary ICESat results obtained during the calibration and validation period of ICESat are described. ICESat is designed to operate for 3 to 5 years and should be followed by successive missions to measure ice changes for at least 15 years.

Zwally, H. Jay↗
NASA NTRS2000

Lidar Technology at the Goddard Laser and Electro-Optics Branch

The Laser and Electro-Optics Branch at Goddard Space flight Center was established about three years ago to provide a focused center of engineering support and technology development in these disciplines with an emphasis on spaced based instruments for Earth and Space Science. The Branch has approximately 15 engineers and technicians with backgrounds in physics, optics, and electrical engineering. Members of the Branch are currently supporting a number of space based lidar efforts as well as several technology efforts aimed at enabling future missions. The largest effort within the Branch is support of the Ice, Cloud, and land Elevation Satellite (ICESAT) carrying the Geoscience Laser Altimeter System (GLAS) instrument. The ICESAT/GLAS primary science objectives are: 1) To determine the mass balance of the polar ice sheets and their contributions to global sea level change; and 2) To obtain essential data for prediction of future changes in ice volume and sea-level. The secondary science objectives are: 1) To measure cloud heights and the vertical structure of clouds and aerosols in the atmosphere; 2) To map the topography of land surfaces; and 3) To measure roughness, reflectivity, vegetation heights, snow-cover, and sea-ice surface characteristics. Our efforts have concentrated on the GLAS receiver component development, the Laser Reference Sensor for the Stellar Reference System, the GLAS fiber optics subsystems, and the prelaunch calibration facilities. We will report on our efforts in the development of the space qualified interference filter [Allan], etalon filter, photon counting detectors, etalor/laser tracking system, and instrument fiber optics, as well as specification and selection of the star tracker and development of the calibration test bed. We are also engaged in development work on lidar sounders for chemical species. We are developing new lidar technology to enable a new class of miniature lidar instruments that are compatible with small Discovery-class orbiters now in the NASA planetary program. The purpose of the lidar is to continuously profile the water vapor and dust in the Mars atmosphere from orbit in order to quantify its dynamics, their relationship in the diurnal cycles, and to infer water vapor exchange with the Mars surface. To remotely measure the water-vapor height profiles, we will use the differential absorption lidar (DIAL) technique. We are also developing a laser sensor for measuring the total column content of CO2 in the atmosphere of the earth. CO2 is the principal greenhouse gas and has increased by roughly 80 ppm in the last century and a half. We will report our efforts in the development of the laser transmitter and photon counting detector components for a Mars Orbiting DIAL system and for the CO2 sounder.

Heaps, William S.↗
NASA NTRS2001

Measurements of the Vertical Structure of Aerosols and Clouds Over the Ocean Using Micro-Pulse LIDAR Systems

The determination of the vertical distribution of aerosols and clouds over the ocean is needed for accurate retrievals of ocean color from satellites observations. The presence of absorbing aerosol layers, especially at altitudes above the boundary layer, has been shown to influence the calculation of ocean color. Also, satellite data must be correctly screened for the presence of clouds, particularly cirrus, in order to measure ocean color. One instrument capable of providing this information is a lidar, which uses pulses of laser light to profile the vertical distribution of aerosol and cloud layers in the atmosphere. However, lidar systems prior to the 1990s were large, expensive, and not eye-safe which made them unsuitable for cruise deployments. During the 1990s the first small, autonomous, and eye-safe lidar system became available: the micro-pulse lidar, or MPL. The MPL is a compact and eye-safe lidar system capable of determining the range of aerosols and clouds by firing a short pulse of laser light (523 nm) and measuring the time-of-flight from pulse transmission to reception of a returned signal. The returned signal is a function of time, converted into range using the speed of light, and is proportional to the amount of light backscattered by atmospheric molecules (Rayleigh scattering), aerosols, and clouds. The MPL achieves ANSI eye-safe standards by sending laser pulses at low energy (micro-J) and expanding the beam to 20.32 cm in diameter. A fast pulse-repetition-frequency (2500 Hz) is used to achieve a good signal-to-noise, despite the low output energy. The MPL has a small field-of-view (< 100 micro-rad) and signals received with the instrument do not contain multiple scattering effects. The MPL has been used successfully at a number of long-term sites and also in several field experiments around the world.

Welton, Ellsworth J.↗
NASA NTRS1984

Microwave radiances from precipitating clouds containing aspherical ice, combined phase, and liquid hydrometeors

A numerical algorithm based on Eddington's second approximation to the equation of radiative transfer has been developed in order to compute the radiances with horizontal and vertical polarization that emerge from precipitating clouds. This algorithm yields a rapid solution to problems pertaining to clouds with vertically inhomogeneous structure. Precipitating clouds containing liquid, mixtures of phases, and ice hydrometeors are modelled. It is shown that the lower-frequency radiances are sensitive to liquid precipitation at low altitudes while the higher-frequency radiances are more sensitive to the ice hydrometeors at the cloud tops. The extinction coefficients of aspherical hydrometeors are presented as a function of rainfall rates. The fact that vertically polarized radiances are warmer than horizontally polarized ones at high rainfall rates, with the difference diminishing at lower frequencies, is due to aspherical ice hydrometeors in the upper regions of precipitating clouds.

Wu, R.↗
NASA NTRS2005

Adaptive Optics Imaging and Spectroscopy of Neptune

OBJECTIVES: We proposed to use high spectral resolution imaging and spectroscopy of Neptune in visible and near-IR spectral ranges to advance our understanding of Neptune s cloud structure. We intended to use the adaptive optics (AO) system at Mt. Wilson at visible wavelengths to try to obtain the first groundbased observations of dark spots on Neptune; we intended to use A 0 observations at the IRTF to obtain near-IR R=2000 spatially resolved spectra and near-IR A0 observations at the Keck observatory to obtain the highest spatial resolution studies of cloud feature dynamics and atmospheric motions. Vertical structure of cloud features was to be inferred from the wavelength dependent absorption of methane and hydrogen,

Johnson, Lindley↗
DOE OSTI2025

Downward Convective Moisture Transport Dominated by a Few Overshooting Clouds in Marine and Continental Shallow Convection

Abstract In a previous study (Xiao et al., 2023, https://doi.org/10.1029/2022ms003526 ), we found that ignoring the moist convective downdrafts associated with overshooting clouds in parameterizations can lead to significant biases in the simulated depth and liquid water content of a shallow cloud layer. In this study, we seek to better quantify the properties of the clouds responsible for these moist downdrafts to help improve shallow convection parameterizations. We apply a 3‐D cloud‐tracking algorithm to large‐eddy simulations (LESs) of marine and continental shallow convection. We find that top 1% and 2% of the tracked cloud population ranked by lifetime‐mean cloud‐base mass flux can explain 90%–95% of the total downward moisture transport in the upper cloud layer whereas top 10%–20% is required to explain 90%–95% of the total upward moisture transport near mean cloud base. The vertical structure of the clouds in the top 1% and 2% (the overshooting “deep mode”) is also distinctively different from that of the rest of the cloud population (the “shallow mode”). Shallow convection parameterizations need to capture accurately the properties and convective transports of the clouds in both the deep and shallow modes. To do that, our results suggest that mass‐flux parameterizations need to (a) accurately predict the size and number of the deep‐mode clouds and (b) explicitly represent overshooting cloud updrafts and associated moist downdrafts.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRSDate not supplied

Observation of Deep Convective Cloud-Top Height and Vertical Temperature Structure of Hurricane Using Hyperspectral Infrared Sounder and its Single-Field-View Retrieval Products

Hurricanes, severe tropical cyclones (TC), or typhoons are significant natural disasters that often result in substantial loss of life and property damage. Numerous studies have indicated that changes in TC intensity are closely linked to deep convective clouds (DCC), with stronger TCs typically exhibiting higher cloud top heights (CTH) compared to weaker TCs. The CTH can help determine if a tropical depression is at the onset of rapid intensification based on case studies. Therefore, accurate determination of TC CTH will be greatly helpful for monitoring TC development and studying TC dynamics. One traditional and most common method to derive CHT from satellite observations is using the thermal brightness temperature in atmospheric channels to match the sounding temperature profile. However, it was found that thermally derived CTH has a lower bias of approximately 1 km, and this bias tends to worsen for the tallest clouds. A new method using the hyperspectral infrared sounder will be presented. From the measurements of Cross-track Infrared Sounder (CrIS) on S-NPP and J-1, along with radiative transfer simulations, we identified the inverted-V spectral feature in the ozone (O3) band (near 9.6 μm) corresponding to high clouds. The depth of the inverted-V can be used to estimate the CTH. Since the depth is computed using the peak absorption O3 channel and the nearby most transparent O3 channel in this O3 band, the uncertainties associated with cloud emissivity and scattering by cloud particles in the traditional method can be ignored. From several hurricane case studies, we found that the CHT derived using this method can accurately capture the structure of the cloud tops in the eyewall, spiral rainbands, and surrounding regions. For example, Hurricane Dorian on September 2, 2019, showed a nicely outward-sloping and circular shape eye cloud in the early morning, but the circular shape of the eyewall cloud became distorted in the afternoon. For various hurricanes we examined, the distribution of CHT for the eyewall clouds differed significantly. To better study the thermodynamic structure of hurricane clouds, this research will analyze the vertical temperature profiles from a new single Field of View (SFOV) Sounder Atmospheric Products (SiFSAP), derived using CrIS and the Advanced Technology Microwave Sounder (ATMS) onboard SNPP and JPSS-1. SiFSAP has a spatial resolution of 15 km at nadir, which surpasses most global weather and climate models and other current operational sounding products. The combined use of ATMS and CrIS allows for retrievals near hurricane eyewalls and spiral rainbands. Wind fields from NASA’s Modern-Era Retrospective Analysis for Research and Applications Version-2 (MERRA-2) and ERA5 will be used to characterize transport, and comparisons between the model temperature and water vapor profiles with the corresponding SiFSAP products will also be provided.

SiFSAP↗
DOE OSTI2023

A Consistent Representation of Cloud Overlap and Cloud Subgrid Vertical Heterogeneity

Many global climate models underestimate the cloud cover and overestimate the cloud albedo, especially for low-level clouds. We determine how a correct representation of the vertical structure of clouds can fix part of this bias. We use the 1D McICA framework and focus on low-level clouds. Using Large Eddy Simulations results as reference, we propose a method based on exponential-random overlap that represents the cloud overlap between layers and the subgrid cloud properties over several vertical scales, with a single value of the overlap parameter. Starting from a coarse vertical grid, representative of atmospheric models, this algorithm is used to generate the vertical profile of the cloud fraction with a finer vertical resolution, or to generate it on the coarse grid but with subgrid heterogeneity and cloud overlap that ensures a correct cloud cover. Doing so we find decorrelation lengths are dependent on the vertical resolution, except if the vertical subgrid heterogeneity and interlayer overlap are taken into account coherently. We confirm that the frequently used maximum-random overlap leads to a significant error by underestimating the low-level cloud cover with a relative error of about 50%, that can lead to an error of SW cloud albedo as big as 70%. Not taking into account the subgrid vertical heterogeneity of clouds can cause a relative error of 20% in brightness, assuming the cloud cover is correct.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1982

The composition and vertical structure of the lower cloud deck on Venus

Excluding the insertion of a probe into the lower Venus atmosphere, the only means of examining the atmospheric properties below the upper cloud layer are by passive or active radio techniques. Particularly, in a radio occultation experiment, the amplitude and Doppler data of a signal which has been refracted by the dense Venus atmosphere provide temperature, pressure, atmospheric density, cloud mass content, and some information about the cloud composition. The Venus orbiting spacecraft Pioneer Venus has provided radio occultation data for more than two years. The present investigation has the primary goal to use the absorption coefficient profiles derived from the radio occultation experiment to determine the mass content and composition of the Venusian lower deck. Attention is given to an experiment description, liquid content calculations, the mass content equation, the subtraction of gaseous absorbers, dielectric constant measurements, the concentration profile, the spherical shell model, and mass content profiles for all orbits.

Cimino, J.↗
NASA NTRS1986

Vertical structure of aerosols and clouds in the atmospheres of Uranus and Neptune: Implications for their heat budgets

Models possessing an upper haze layer of finite optical depth and a lower cloud layer of infinite optical depth at discrete altitudes are used to bound the wavelength-averaged phase integrals and bolometric albedos of Uranus and Neptune. The models differ in the assumed value of the particles single scattering phase function and the wavelength dependence of the haze optical depth. A range of phase functions, from the isotropic to those characterizing Titan, Jupiter, and Saturn atmosphere particles, are discussed. The results obtained imply that the meteorological regimes in the observable atmospheres of Uranus and Neptune may differ considerably; internal heat flux could play a much more important role for Neptune than for Uranus.

Pollack, James B.↗