Search NASA⌕ Search

SEARCH · Search NASA

Results for “co2 reduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Understanding of Ag Nanocatalysts for Electrocatalytic CO2 Conversion: Effects of Particle Size and Carbon Support

In this talk, we combined ultrahigh vacuum (UHV) surface science techniques, electrochemical measurements, and computational modeling to investigate Ag based electrocatalysts for CO2 reduction reaction (CO2RR). Our goal is to understand the critical characteristics governing the activity and selectivity of Ag electrocatalysts. Ag electrocatalysts were grown on highly oriented pyrolytic graphite (HOPG) in the UHV chamber, characterized with X-ray photoelectron spectroscopy (XPS) and scanning tunneling microscopy (STM), and then tested in a custom-built gastight H-cell. Supported by computational modeling based on density functional theory (DFT) calculations and microkinetic modeling (MKM), our studies revealed a strong size-dependent electrocatalytic CO2-to-CO conversion of the Ag nanoparticle electrocatalysts with average particle diameter between 2 to 6 nm. Smaller diameter (< 3 nm) particles favored H2 evolution reaction (HER) due to a high population of Ag edge sites, whereas larger diameter particles favored CO2RR as the population of Ag(100) surface sites grew. We further discovered that electronic interactions between small diameter Ag particles and highly defective carbon supports could break the size-dependent CO2RR reactivity, resulting in highly selective (CO Faradaic Efficiency > 90%) and active Ag nanoparticle electrocatalysts with sizes < 2 nm diameter. This knowledge is key to understand electrocatalysts performance and to ultimately guide electrocatalyst design

Ag nanoparticles↗
DOE OSTI2023

Dual atom catalysts for rapid electrochemical reduction of CO to ethylene

Strong CO adsorption and facile CO dimerization are the key challenges in electrochemical CO2 reduction towards multi-carbon (C2+) products. We recently showed that CoPc immobilized on a single-walled carbon nanotube can selectively reduce CO2 to methanol. This is enabled through molecular strain, which dramatically improves the CO adsorption energy to CoPc, which in turn facilitates methanol formation. We now examine the extended Phthalocyanine (PcEx) dual atom catalyst (DAC), which is intrinsically strained and contains two catalyst centers, making it a candidate for reducing CO to C2+ products. Using Quantum Mechanics (QM), we screened 20 elements embedded in the PcEx, seeking catalysts with weak hydrogen binding, strong CO binding, and facile CO dimerization. We identi>ied Fe, Ru, Co, and Ir as the best performers and subsequently evaluated the entire CO to C2H4 mechanism (9 steps) using each of these elements as catalysts. In terms of limiting potential and overall exergonicity, we identi>ied CoPcEx as the best catalyst, followed by IrPcEx. We then examined the full CO to C2H4 mechanism on the bimetallic IrCoPcEx catalyst using grand canonical QM to obtain the reaction energetics as a function of applied potential. We conclude that the bimetallic IrCoPcEx is most promising for ef>iciently converting CO to ethylene.

Musgrave, Charles B.↗
DOE OSTI2021

Integration of CO2 Electrolysis with Microbial Syngas Upgrading to Rewire the Carbon Economy

This project has worked towards demonstrating and understanding the conversion of waste CO2 into value added fuels and chemicals. If successful, our proposed technology will incentivize CO2 capture and can add carbon efficiency to biorefineries. We have integrated two conversion technologies to demonstrate a novel approach of combining electrolytic CO2 reduction with biocatalytic CO upgrading. Industrial partners 3M and Dioxide Materials have recently demonstrated electrolytic conversion of CO2 and water to syngas using inexpensive renewable energy. Concurrently, supporting partner Lanzatech has demonstrated industrial scale CO fermentation using steel mill waste CO as a substrate. This presentation will highlight the investment BETO has made to establish a CO2 electrolysis test station and CO fermentation at NREL. We will also discuss the process of increasing the size of the electrolyzers to meet fermentation needs, along with the investigation into the affect CO2 concentration and contaminates have on electrolyzer efficiency, lifetime, and specificity. Additionally, we have begun to examine the downstream impact of electrolyzer off-gas CO:H2 ratios have on the metabolism of C. autoethanologen. Experimental results along input from our industrial partners have led to a baseline techno-economic and life cycle analyses. These results enabled the identification of key cost drivers and carbon intensity of the process. We have used these metrics to identify technology gaps to iteratively inform the process optimization and potential deployment siting to achieve economically viable, sustainable conversion of biopower-derived flue gases to fuels and chemical intermediates.

bioenergy↗
DOE OSTI2022

Probing Electrolyte Influence on CO 2 Reduction in Aprotic Solvents

Selective CO 2 capture and electrochemical conversion are important tools in the fight against climate change. Industrially, CO 2 is captured using a variety of aprotic solvents due to their high CO 2 solubility. However, most research efforts on electrochemical CO 2 conversion use aqueous media and are plagued by competing hydrogen evolution reaction (HER) from water breakdown. Fortunately, aprotic solvents can circumvent HER, making it important to develop strategies that enable integrated CO 2 capture and conversion. However, the influence of ion solvation and solvent selection within nonaqueous electrolytes for efficient and selective CO 2 reduction is unclear. In this work, we show that the bulk solvation behavior within the nonaqueous electrolyte can control the CO2 reduction reaction and product distribution occurring at the catalyst-electrolyte interface. We study different tetrabutylammonium (TBA) salts in two electrolyte systems with glyme ethers (e.g., 1,2 dimethoxyethane or DME) and dimethyl sulfoxide (DMSO) as a low and high dielectric constant medium, respectively. Using spectroscopic tools, we quantify the fraction of ion pairs that forms within the electrolyte. Also, we show how ion pair formation is prevalent in DME and is dependent on the anion type. More importantly, we show that as ion pair formation decreases within the electrolyte, CO 2 current densities increase, and a higher CO Faradaic efficiency is observed at low overpotentials. Meanwhile, in an electrolyte medium where the ion pair fraction does not change with the anion type (such as in DMSO), a smaller influence of solvation is observed on CO 2 current densities and product distribution. By directly coupling bulk solvation to interfacial reactions and product distribution, we showcase the importance and utility of controlling the reaction microenvironment in tuning the electrocatalytic reaction pathways. Insights gained from this work will enable novel electrolyte designs for efficient and selective CO 2 conversion to desired fuels and chemicals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

BETO 2021 Peer Review - Feasibility Study of Utilizing Electricity to Produce Intermediates from CO2 and Biomass

Capturing and converting CO2 generated from bioethanol facilities into valuable products, leveraging renewable electricity as the primary energy input, could increase overall biorefinery carbon utilization by as much as 40% and provide a means to decarbonize fuels and chemicals production. However, significant uncertainty exists around the costs, carbon intensity, risks, and technical challenges associated with electron-driven CO2 reduction. Thus, the overarching objective of this project is to guide existing and future research and development efforts by addressing these knowledge gaps for utilizing renewable electricity and CO2 to improve biorefinery economics and carbon utilization. By September 2023, this project will develop and publish a comprehensive design report for the integration of CO2 utilization into two existing conceptual biorefinery designs, which will include conceptual process models, pioneer and nth plant economics, identification and quantification of technological risks, and projections for future cost reductions.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2022

A Novel Process for Carbon Dioxide Conversion to Fuel

In this project, TDA developed a new mixed metal oxide-based sorbent that converts CO2 (captured from coal fired power plants) to CO, which can then be combined with renewable H2 generated by water electrolysis or H2 from steam methane reforming to produce different liquid fuels. TDA’s absorbent-based CO2 conversion process uses a redox process, which splits the catalytic reforming of methane with CO2 reaction into two stages: CO2 reduction to CO and CH4 reforming into H2 and CO which eliminates the equilibrium limitations. The CO produced in the two-stage reactor system can then be further reacted with renewable H2 to produce methanol, naphtha, diesel, or gasoline. We worked with the Advanced Power & Energy Program (APEP) of University of California, Irvine (UCI) to design and develop the liquid fuel synthesis process that is built around this new material. We demonstrated the techno-economic viability of the new sorbent based redox process to convert CO2 into synthesis gas by demonstrating continuous carbon dioxide reduction in a prototype test system for over 585 hours while converting up to 10 kg CO2/day. With the successful completion of the R&D effort, the technology is now ready for a larger pilot-scale demonstration and the technology readiness has been raised from TRL 3 to TRL 5. In collaboration with UCI, we completed a high-fidelity process design and economic analysis. The required sale price (RSP) for gasoline (Case 1 NG-MTG) is $4.91/gal and naphtha and diesel (Case 2 NG-FT) are $4.23/gal and $6.07/gal, respectively, on a 2011 dollar basis. To put these costs in perspective, the California prices in current dollars (with its strict specifications) for regular grade gasoline from last year to current year have varied from a low of $3.10/gal in January 2021 to a high of $5.76/gal in March 2022, while prices for diesel from last year to current year have varied from a low of $3.40/gal in January 2021 to a high of $6.41/gal in May 2022 according to the U.S. Energy Information Agency data. It should be noted that the gasoline and diesel produced by these designs of Case 1 and Case 2 would be of very high quality and both nitrogen and sulfur free. These RSPs are based on a cost of imported electricity of $64/MWh based on the low-end current wind generated electricity cost (Genevieve 2011). This cost is by far the largest component of the variable costs used in computing the RSPs. A sensitivity analysis of these RSPs to the cost of imported electricity shows that the cost of the imported electricity has a significant effect on the RSPs. The life cycle analysis (LCA) shows that the total cradle-to-gate CO2 emissions for both liquid fuels (diesel and gasoline) were negative, indicating that overall more CO2 is consumed than released during production of the fuel from CO2 feed stack for both cases (-296 kgCO2 per MT gasoline for Case 1 and -705 kgCO2 per MT diesel for Case 2). On a cradle-to-grave comparison, the use of diesel produced using TDA’s process (2,457 kgCO2 per MT diesel) would release 37.6% less CO2 compared to petroleum based diesel (3,937 kgCO2 per MT diesel) while the use of gasoline produced using TDA’s process (2,792 kgCO2 per MT gasoline) would release 29.3% less CO2 compared to petroleum based gasoline (3,946 kgCO2 per MT gasoline). With the successful completion of the R&D effort, the technology is now ready for a bench-scale demonstration and the technology readiness has been raised from TRL 3 (Analytical and experimental critical function and/or characteristic proof of concept) to TRL 5 (Laboratory scale similar system validation in relevant environment).

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2024

Combining CO2 Electrolysis with Biological Upgrading to Fuels and Chemicals: Turning Waste into Fuels

The utilization of flue gas-derived CO2 presents an opportunity to enhance carbon utilization in the bioethanol industry, contributing to the production of valuable products. In the context of a 90 million-gallon-per-year corn ethanol plant generating approximately 30 tons per hour of 99% pure CO2, a collaborative effort involving six national laboratories has been established. This initiative, known as the CO2 Reduction and Upgrading for e-Fuels (CO2RUe) Consortium, is funded by the Department of Energy's BioEnergy Technologies Office (BETO). The primary objective of the CO2RUe Consortium is to explore innovative approaches to harness CO2 as a valuable feedstock. This interdisciplinary consortium integrates electrochemistry with biological upgrading techniques, aiming to yield sustainable, value-added products and aviation fuels. The presentation will delve into the recent advancements in the realms of electrochemistry and biological upgrading, with a specific focus on formic acid and CO. Additionally, the talk will include an analysis of future electricity grid scenarios, technoeconomic evaluations, and life-cycle assessments. These assessments aim to provide a comprehensive understanding of the impacts of various conversion pathways on both cost and carbon intensity. The CO2RUe Consortium is at the forefront of steering the development of economically favorable and sustainable processes for CO2 utilization. The presentation will showcase the consortium's progress in driving the advancement of technology and processes, emphasizing the economic viability and sustainability of CO2 utilization within the broader context of the bioethanol industry.

biological upgrading↗
DOE OSTI2021

CO2 Electrolyzer to Produce Formic Acid at Industry Relevant Current Density

Electrochemical CO2 reduction reaction (CO2RR) to produce formic acid has attracted great interest recently since formic acid can be used as a feedstock for biorefineries. Over the past decade, much effort has been devoted to the prospects of electrochemical CO2 conversion to formic acid. However, issues including low current density, low selectivity, low energy efficiency, poor long-term stability, and production of formate salts instead of formic acid remain as the great challenges for the development and commercialization of this technology. Recently, Dioxide Materials (DM) has developed an electrolyzer technology that can directly convert CO2 to pure formic acid with a three-compartment CO2 electrolyzer. In this work, DM will present our recent effort on improving the electrolyzer performance operating at industry relevant current density (200 mA/cm2). We have demonstrated 200 mA/cm² with 80% Faradaic efficiency for 1000 hours of operation. The effects of CO2 concentration and impurities in the flue gas on the electrolyzer performance will be discussed, as will ongoing efforts to test the device at a coal fired power plant. The long-term (1000 h) performance of the electrolyzer will also be presented.

Yang, Hongzhou↗
DOE OSTI2024

Sulfur-Doped Carbon Support Boosts CO2RR Activity of Ag Electrocatalysts

For presentation at the 70th AVS International Symposium and Exhibition. In this work, we show that the activity of Ag electrocatalysts for electrochemical CO2 to CO conversion is improved when supported on sulfur-doped (S-doped) carbon materials. S-doped carbon support was created by treating the heavily sputtered, highly oriented pyrolytic graphite (HOPG) in H2S at elevated temperatures, as confirmed by the S 2p X-ray photoelectron spectroscopy (XPS) peak. Scanning tunneling microscopy (STM) images indicated that Ag nanoparticles supported on S-doped HOPG had similar size distributions as those supported on sulfur-free (S-free) HOPG. While both catalysts reached > 90% CO Faradaic efficiency (FECO) at E = -1.3 V vs. the reversible hydrogen electrode (RHE) in the CO2 reduction reaction (CO2RR), Ag catalysts supported on S-doped HOPG demonstrated 70% higher CO turnover frequency (TOFCO = 3.4 CO/atomAg/s) than those supported on S-free HOPG (TOFCO = 2.0 CO/atomAg/s). Preliminary calculations based on density functional theory (DFT) indicated a more favorable energetic pathway of CO2-to-CO at the C-S-Ag interface, tentatively consistent with experiments. These results hint at a new approach to design active and selective electrocatalysts for CO2 conversion.

Deng, Xingyi↗
DOE OSTI2020

Bismuthene for highly efficient carbon dioxide electroreduction reaction

Bismuth (Bi) has been known as a highly efficient electrocatalyst for CO 2 reduction reaction. Stable free-standing two-dimensional Bi monolayer (Bismuthene) structures have been predicted theoretically, but never realized experimentally. Here, we show the first simple large-scale synthesis of free-standing Bismuthene, to our knowledge, and demonstrate its high electrocatalytic efficiency for formate (HCOO - ) formation from CO 2 reduction reaction. The catalytic performance is evident by the high Faradaic efficiency (99% at -580 mV vs. Reversible Hydrogen Electrode (RHE)), small onset overpotential (<90 mV) and high durability (no performance decay after 75 h and annealing at 400 °C). Density functional theory calculations show the structure-sensitivity of the CO2 reduction reaction over Bismuthene and thicker nanosheets, suggesting that selective formation of HCOO - indeed can proceed easily on Bismuthene (111) facet due to the unique compressive strain. This work paves the way for the extensive experimental investigation of Bismuthene in many different fields.

Science & Technology - Other Topics↗
DOE OSTI2025

Optimization of Ag Electrocatalyst Performance for CO2 to CO Conversion: Pairing Atomic Simulations with Experiments

Density-functional theory- based calculations that complement our series of experimental efforts on optimizing Ag electrocatalyst performance for CO2 to CO conversion were presented. Three key findings are drawn out from the combined UHV surface science, STM and electrochemical measurements: (1) Using a series of Ag nanoparticles with 2-6 nm average diameters, CO2 reduction reaction (CO2RR) activity increases, with particle between 2 nm and ∼4 nm demonstrating the highest combination of activity and selectivity; (2) Electronic metal−support interactions (EMSIs) between Ag and C dramatically improve CO2RR performance as evidenced by a scaling relationship between particle size and the relative Ag−C EMSIs strength, which improves the CO2-to-CO Faradaic efficiency of sub-2 nm Ag particles from 2 to ∼100% and increases the CO turnover frequency ∼15-fold compared with similarly sized bare Ag particles; (3) The performance Ag electrocatalysts is improved when supported on S-doped C materials. Computational modeling of 1−10 nm Ag particles predicts a nearly identical size-dependent trend with maximum CO2RR activity predicted for 3.7nm particles. The calculations support the promotional effect of C materials, showing a large charge transfer of 1.02 e from Ag clusters to defective C and a 0.41 eV less endergonic step of forming COOH intermediate on Ag/defective-C compared to the Ag/C system. Calculations indicate a more favorable energetic pathway of CO2-to-CO at the C-S-Ag interface, consistent with experiments.

CO2 utilization↗
DOE OSTI2026

Boosting CO2R Performance of Ag Electrocatalysts by Sulfur-Doped Carbon Support

We find that S-doped carbon support can boost the CO2 reduction (CO2R) performance of Ag electrocatalysts. Firstly, surface science enabled electrocatalysis showed that Ag supported on S-doped highly oriented pyrolytic graphite (HOPG), a model electrocatalyst, demonstrated 100% higher CO turnover frequency (TOFCO = 3.6 ± 0.2 CO/atomAg/s) than that supported on S-free HOPG (TOFCO = 1.8 ± 0.2 CO/atomAg/s). Computational modeling based on density functional theory (DFT) revealed a more stabilized *COOH intermediate on Ag supported on S-doped carbon and thus a more favorable energetic pathway of CO2-to-CO, consistent with experimental results from the model electrocatalysts studies. Finally, this proof of concept was translated to the synthesis of powder electrocatalyst with 2 wt% Ag supported on S-doped carbon black, demonstrating > 40-fold high CO mass activity than a commercial Ag cathode with steady FECO ~ 96% at 100 mA/cm2 for 50 hours of continuous operation in a gas diffusion electrode (GDE) electrolyzer. For comparison, 2 wt% Ag supported on carbon black without S- doping showed a maximum FECO ~ 70% at 100 mA/cm2. This work demonstrates a successful bottom-up design of CO2R electrocatalysts guided by surface science enabled electrocatalysis.

CO2 conversion↗
DOE OSTI2024

Growth of Well-Defined Model Catalysts for Electrochemistry: From Surface Science Studies to Electrocatalytic CO2 Conversion

We combined ultrahigh vacuum (UHV) surface science techniques, electrochemical measurements, and computational modeling to investigate electrocatalytic systems that are crucial components of the carbon management effort, including oxygen evolution reactions (OER) and CO2 reduction reactions (CO2RR). Well-defined Model catalysts were grown on substrates in the UHV chamber and characterized with X-ray photoelectron spectroscopy (XPS) and scanning tunneling microscopy (STM). Selected model electrocatalysts were then tested in electrochemical cells to establish the structure-property relationships in OER and CO2RR. Our results showed that the edge sites of Fe2O3 grown on Au(111) were the most active toward OER and incorporation of Ni at the edge sites (NiFeOx) further boosted their OER activity. We also resolved the size-dependent electrocatalytic CO2-to-CO conversion of the Ag nanoparticle electrocatalysts with average particle diameter between 2 to 6 nm: smaller diameter (< 3 nm) particles favored H2 evolution reaction (HER) due to a high population of Ag edge sites, whereas larger diameter particles favored CO2RR as the population of Ag(100) surface sites grew. We further discovered that electronic interactions between small diameter Ag particles and highly defective carbon supports could break the size-dependent CO2RR selectivity, resulting in highly selective (CO Faradaic Efficiency > 90%) and active Ag nanoparticle electrocatalysts with sizes < 2 nm diameter.

Deng, Xingyi↗
DOE OSTI2023

Surface Engineering of Copper Catalyst through CO* Adsorbate

The electrochemical reduction of CO 2 with Cu-based catalysts depends intimately on the instantaneous local chemical environment of the catalyst-electrolyte interface. This microenvironment fluctuates according to the concentration of surface-adsorbed competing reaction intermediates and the applied electrode potential. In practice, disentangling these factors is exceedingly challenging, yet they critically determine the electrocatalyst efficiency and selectivity. Using grand canonical quantum-classical hybrid calculations, we quantify the complex interdependence between electrode potential, CO* coverage, and the interfacial field strength. Here we show that the often overlooked CO* coverage effect in fact strongly influences the field strength, with a magnitude change exceeding 1V/Å at certain potentials; among other effects, this change should lower the CO* dimerization barrier that dictates selectivity toward multi-carbon products. Beyond showcasing the importance of surface coverage for CO2 reduction, our results highlight the power of surface additives to modulate interfacial fields toward tailored electrochemical pathways.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2023

Large-scale synthesis of metal/nitrogen Co-doped carbon catalysts for CO 2 electroreduction

In this work, we report a facile approach for synthesizing M–N–C catalysts (M = Co, Fe, Ni) at a commercial scale without employing organic solvents. Our characterization efforts indicate that single atomic catalysts with high surface areas were successfully obtained. Electrochemical measurements demonstrate that, among the three synthesized catalysts, Ni–N–C exhibits the highest performance in the electrochemical CO2 reduction reaction (CO 2 RR) to carbon monoxide (CO), affording 80% Faradaic efficiency (FE) of CO production at –0.49 V RHE with a turnover frequency (TOF) of 57,379 h –1 . Large-scale synthesis coupled with high performance allows moving forward with the practical implementation of M–N–C catalysts for industrially relevant CO 2 RR.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Rhodium Single–Atom Catalysts on Titania for Reverse Water Gas Shift Reaction Explored by First Principles Mechanistic Analysis and Compared to Nanoclusters

The thermocatalytic reduction of CO2 by H2 often proceeds via two competing reaction mechanisms—the reverse water gas shift reaction (rWGSR, CO2 + H2 ⇌ CO + H2O) and methanation (CO2 + 4H2 ⇌ CH4 + 2H2O). Atomically dispersed Rh1 catalysts on TiO2 show high selectivity toward the rWGSR compared with larger Rh nanoclusters, but the origin of this size-dependent selectivity has not been fully explained. Here we report density functional theory (DFT) calculations and microkinetic simulations that clarify the Rh1 active sites and rWGSR pathway on anatase TiO2(101), as well as the high rWGSR selectivity of Rh1 compared with supported Rhx (x = 2–8 atoms) nanoclusters. DFT-computed formation energies, vibrational frequency analysis, and microkinetic modeling suggest three plausible active sites: Rh1 on titania (Rh1/TiO2(101)), Rh1 with a nearby hydroxyl group (Rh1OH/TiO2(101)), and Rh1 near an oxygen vacancy at a three-fold coordinated site (Rh1 near O3cvac). Predicted turnover frequencies and apparent activation barriers for Rh1 indicate a faster reaction involving CO2 dissociation assisted by a support oxygen vacancy via Rh1 near O3cvac, as well as slower reactions involving Rh1OH/TiO2(101) or Rh1/TiO2(101) through a COOH intermediate. Furthermore, these Rh1 sites are selective toward CO rather than CH4 because of the weak adsorption of CO, large barrier for C-O bond dissociation, and the lack of nearby metal sites for H2 dissociation, in contrast to Rhx nanoclusters, including Rh2 dimers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗