Search NASA⌕ Search

SEARCH · Search NASA

Results for “conformal maps”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Multipole-based Cable Braid Magnetic Penetration Model for Conducting Wires

In this report, we investigate the effects of conductor losses in a multipole-based cable braid magnetic penetration model. Our multipole model uses a mesh of the actual cable geometry, which enables us to model more complicated structures. After summarizing the first principles model formulation, we consider a one-dimensional array of wires, for which an analytical solution is known in the lossless case. We extend this solution to the lossy case by using a complex-valued radius. We also model this structure analytically using a conformal-mapping solution. We then compare both the self-impedance and the transfer impedance results from our first principles cable braid electromagnetic penetration model to those obtained using the analytical solutions. An analysis for various frequencies (and skin depths) usually encountered in cable modeling is reported. These results are found in good agreement up to a radius to half spacing ratio of about 0.7, demonstrating a robustness needed for many commercial and non-commercial cables.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Charge And Dynamic Current On Tubular Antennas For Various Drive Conditions

The mixed boundary value problem of a tubular conductor is solved using an approximate representation of its Fourier coefficients. A two term solution is derived, which represents the solution over an extremely broad range of aspect ratios. This representation is used to find the electrostatic solution and capacitance of a charged tube as well as the solution of a tube in a uniform field and its dipole moment. This second case is directly useful as a model for a monopole electric field probe. This approximation is a special case of a representation using a combination of Chebyshev and Legendre polynomials. Combining the charged tube and tube in a uniform field allows the solution of voltage driven tubular antennas. Comparisons are made with numerical solutions using piecewise sinusoidal representations of the current. The results are also generalized to the dynamic case and up to and beyond the first resonance. Simple corrections for finite gap and delta gap drives to magnetic frill drives are examined using infinite tube integral transform representations. Corrections between magnetic frill drives and coaxial drives are also given. Approximate drive corrections using conformal mapping and an effective radius are also discussed. Finally, this efficient current representation is applied to the magnetic problem involving simple tubular solenoids.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1970

Calculation of incompressible fluid flow through cambered blades

Conformal mapping technique yields linear, approximate solutions for calculating flow of an incompressible fluid through staggered array of cambered blades for the cases of flow with partial cavitation and supercavitation. Lift and drag coefficients, cavitation number, cavity shape, and exit flow conditions can be determined.

Hsu, C. C.↗
NASA NTRS1971

Wind-driven currents in a shallow lake or sea

For shallow lakes and seas such as the great lakes (especially Lake Erie) where the depth is not much greater than the Ekman depth, the usual Ekman dynamics cannot be used to predict the wind driven currents. The necessary extension to include shallow bodies of water, given by Welander, leads to a partial differential equation for the surface displacement which in turn determines all other flow quantities. A technique for obtaining exact analytical solutions to Welander's equation for bodies of water with large class of bottom topographies which may or may not contain islands is given. It involves applying conformal mapping methods to an extension of Welander's equation into the complex plane. When the wind stress is constant (which is the usual assumption for lakes) the method leads to general solutions which hold for bodies of water of arbitrary shape (the shape appears in the solutions through a set of constants which are the coefficients in the Laurent expansion of a mapping of the particular lake geometry). The method is applied to an elliptically shaped lake and a circular lake containing an eccentrically located circular island.

Goldstein, M. E.↗
NASA NTRS1973

Wind-driven currents in a shallow lake or sea.

A technique is given for obtaining exact analytical solutions for wind-driven currents in a shallow lake or sea with a large class of bottom topographies which may or may not contain an island. Welander's second-order partial differential equation for the lake's surface displacement is used for determining the lake circulation. The technique, together with some results based on conformal mapping, is used to reduce the problem of finding solutions to Welander's equation for a closed body of water to the problem of solving an ordinary differential equation. The method is applied to an elliptically shaped lake and a circular lake containing an eccentrically located circular island.

Goldstein, M.↗
NASA NTRS1973

Computer simulation of shock wave boundary layer interaction

Development of a boundary layer correction for an analysis program previously used by Bauer et al. (1972) to study two-dimensional flow past transonic airfoils at off-design conditions where shocks which interact with the boundary layer appear. Using a method which combines conformal mapping with a finite-difference scheme due to Murman and Cole (1971), an analysis is made of the interaction between shock waves on a supercritical wing section and a turbulent boundary layer, assuming that the shocks are weak and that separation is insignificant. It is shown that relatively simple shock wave/boundary layer interactions of the kind envisioned in this study can be treated by determining the displacement thickness iteratively together with the flow and altering the profile accordingly. It is concluded that the proposed boundary layer correction appears to furnish an essential improvement in cases where both pronounced aft loading and a large enclosed supersonic region of flow are present.

Bauer, F.↗
NASA NTRS1975

Analysis of liquid-metal-jet impingement cooling in a corner region and for a row of jets

A conformal mapping method was used to analyze liquid-metal-jet impingement heat transfer. The jet flow region and energy equation are transformed to correspond to uniform flow in a parallel plate channel with nonuniform heat addition along a portion of one wall. The exact solution for the wall-temperature distribution was obtained in the transformed channel, and the results are mapped back into the physical plane. Two geometries are analyzed. One is for a single slot jet directed either into an interior corner formed by two flat plates, or over the external sides of the corner; the flat plates are uniformly heated, and the corner can have various included angles. The heat-transfer coefficient at the stagnation point at the apex of the plates is obtained as a function of the corner angle, and temperature distributions are calculated along the heated walls. The second geometry is an infinite row of uniformly spaced parallel slot jets impinging normally against a uniformly heated plate. The heat-transfer behavior is obtained as a function of the spacing between the jets. Results are given for several jet Peclet numbers from 5 to 50.

Siegel, R.↗
NASA NTRS1976

Development of a computer code for calculating the steady super/hypersonic inviscid flow around real configurations. Volume 1: Computational technique

A numerical procedure has been developed to compute the inviscid super/hypersonic flow field about complex vehicle geometries accurately and efficiently. A second order accurate finite difference scheme is used to integrate the three dimensional Euler equations in regions of continuous flow, while all shock waves are computed as discontinuities via the Rankine Hugoniot jump conditions. Conformal mappings are used to develop a computational grid. The effects of blunt nose entropy layers are computed in detail. Real gas effects for equilibrium air are included using curve fits of Mollier charts. Typical calculated results for shuttle orbiter, hypersonic transport, and supersonic aircraft configurations are included to demonstrate the usefulness of this tool.

Marconi, F.↗
NASA NTRS1976

Calculation of the three-dimension, supersonic, inviscid, steady flow past an arrow-winged airframe, part 1

A detailed description of the procedure used to compute three dimensional, supersonic, inviscid, steady flows past airframes is given. No limitations are imposed on the geometry of the airplane. Suitable computational grids are generated by automatic conformal mappings. The equations of motion, with pressure, entropy, and velocity direction as basic unknowns, are written and discretized in the computational space. Special rules to approximate derivatives are given. Boundary points are treated by a modified method of characteristics.

Moretti, G.↗
NASA NTRS1976

Development of a computer code for calculating the steady super/hypersonic inviscid flow around real configurations. Volume 2: Code description

A numerical procedure was developed to compute the inviscid super/hypersonic flow field about complex vehicle geometries accurately and efficiently. A second-order accurate finite difference scheme is used to integrate the three-dimensional Euler equations in regions of continuous flow, while all shock waves are computed as discontinuities via the Rankine-Hugoniot jump conditions. Conformal mappings are used to develop a computational grid. The effects of blunt nose entropy layers are computed in detail. Real gas effects for equilibrium air are included using curve fits of Mollier charts. Typical calculated results for shuttle orbiter, hypersonic transport, and supersonic aircraft configurations are included to demonstrate the usefulness of this tool.

Marconi, F.↗
NASA NTRS1976

Accelerated iterative calculation of transonic nacelle flowfields

A method is presented for the calculation of inviscid, supercritical flowfields about axisymmetric inlet cowls. A finite-difference calculation is performed in a simple, rectangular domain obtained from the nacelle geometry by a nearly-conformal mapping procedure. Type-dependent finite-differences are constructed using a coordinate-independent, 'rotated' differencing scheme. Methods of accelerating convergence of the iterative solution are demonstrated including a hybrid fast-Poisson-solver/relaxation scheme and an extrapolated relaxation procedure. Calculated pressure distributions are compared with experimental data for a variety of Mach numbers and mass-flow ratios, and show generally good agreement.

Caughey, D. A.↗
NASA NTRS1976

Heat flow anomaly associated with dike intrusion. II

An investigation reported by Horai (1974) is continued. A special case of the steady state temperature field associated with dike intrusion is studied, taking into account an infinite vertical downward extension of the isotherm of rectangular shape approximating the dike. The considered case represents a problem of two-dimensional steady state thermal conduction. The technique of conformal mapping used is identical to the method employed by Horai (1974). The characteristics of surface heat flow associated with an infinitesimal thin dike of certain temperature with the considered extension are shown in a graph.

Horai, K.-I.↗
NASA NTRS1976

A finite element solution of unsteady transonic flow problems for three-dimensional wings and bodies

A computerized finite element method has been developed to solve a form of the three-dimensional inviscid, irrotational unsteady transonic equation for pointed and rectangular wings and wing-body combinations. The equation is a 'parabolized' version of the full unsteady transonic equation which includes the effect of the advancing wave and the acceleration in the steady flow field thus including a thickness effect. Automatic mesh generation using conformal mapping has the advantage of allowing relatively arbitrary cross-sections to be closely approximated while taking advantage of the body's similarity to a more simple configuration. Plunge, pitch, and roll modes are computed

Kimble, K. R.↗