Search NASA⌕ Search

SEARCH · Search NASA

Results for “core sampling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Evaluations of lunar samples for the presence of viable organisms

Samples from the six successful Apollo lunar exploration missions were examined for the presence of biological formed elements and were used to inoculate a variety of culture media designed to promote growth of a broad spectrum of microorganisms. No evidence of viable organisms was obtained from any of these analyses. Following incubation of the lunar material-culture medium complexes, microbial growth dynamics studies were conducted with known test species to evaluate the possible presence of toxic factors. Only extracts of culture media which had been in contact with a mixture of lunar material from both Apollo 11 core tubes proved to be toxic to all species tested. Attempts to reproduce this toxic effect with individual Apollo 11 core samples obtained at other parts of the core and analyzed under somewhat different conditions were unsuccessful. In all, 48 different lunar samples were examined. These samples were collected at the lunar surface, in trenches, and in core samples to a depth of 297 cm.

Taylor, G. R.↗

Manson impact structure, Iowa: First geochemical results for drill core M-1

The Manson Impact Structure is a large complex impact crater centered ca. S km north of the town of Manson, Iowa. It is the largest intact impact structure recognized in the United States (35 km in diameter). Its Ar-40/Ar-39 age is indistinguishable from that of the Cretaceous-Tertiary (K-T) boundary. The Manson structure may be one element of the events at the K-T boundary. The crater is completely covered by Quaternary glacial sedimentary deposits that are normally underlain by Cretaceous clastic sediments and flat-lying carbonate sediments of Phanerozoic age, as well as Proterozoic red clastic, metamorphic, volcanic, and plutonic rock sequences. The study of a reflection seismic profile, provided by Amoco, was critical in interpreting the structure. In the 35 km diameter zone that marks the extension of the crater the normal rock sequence is disturbed due to the impact, and at the center of the structure granitic basement rocks are present that have been uplifted from about 4 km depth. Our studies consist of detailed petrological and geochemical characterization of all cores, with emphasis on a detailed description of all rock types found in the core samples and their relationship to target rocks. Geochemical data on samples from the Manson M-1 core are presented.

Koeberl, Christian↗

Restoration and PDS Archive of Apollo Lunar Rock Sample Data

In 2008, scientists at the Johnson Space Center (JSC) Lunar Sample Laboratory and Image Science & Analysis Laboratory (under the auspices of the Astromaterials Research and Exploration Science Directorate or ARES) began work on a 4-year project to digitize the original film negatives of Apollo Lunar Rock Sample photographs. These rock samples together with lunar regolith and core samples were collected as part of the lander missions for Apollos 11, 12, 14, 15, 16 and 17. The original film negatives are stored at JSC under cryogenic conditions. This effort is data restoration in the truest sense. The images represent the only record available to scientists which allows them to view the rock samples when making a sample request. As the negatives are being scanned, they are also being formatted and documented for permanent archive in the NASA Planetary Data System (PDS) archive. The ARES group is working collaboratively with the Imaging Node of the PDS on the archiving.

Garcia, P. A.↗

PDS Archive Release of Apollo 11, Apollo 12, and Apollo 17 Lunar Rock Sample Images

Scientists at the Johnson Space Center (JSC) Lunar Sample Laboratory, Information Resources Directorate, and Image Science & Analysis Laboratory have been working to digitize (scan) the original film negatives of Apollo Lunar Rock Sample photographs [1, 2]. The rock samples, and associated regolith and lunar core samples, were obtained during the Apollo 11, 12, 14, 15, 16 and 17 missions. The images allow scientists to view the individual rock samples in their original or subdivided state prior to requesting physical samples for their research. In cases where access to the actual physical samples is not practical, the images provide an alternate mechanism for study of the subject samples. As the negatives are being scanned, they have been formatted and documented for permanent archive in the NASA Planetary Data System (PDS). The Astromaterials Research and Exploration Science Directorate (which includes the Lunar Sample Laboratory and Image Science & Analysis Laboratory) at JSC is working collaboratively with the Imaging Node of the PDS on the archiving of these valuable data. The PDS Imaging Node is now pleased to announce the release of the image archives for Apollo missions 11, 12, and 17.

Garcia, P. A.↗

Evaluating Core Quality for a Mars Sample Return Mission

Sample return missions, including the proposed Mars Sample Return (MSR) mission, propose to collect core samples from scientifically valuable sites on Mars. These core samples would undergo extreme forces during the drilling process, and during the reentry process if the EEV (Earth Entry Vehicle) performed a hard landing on Earth. Because of the foreseen damage to the stratigraphy of the cores, it is important to evaluate each core for rock quality. However, because no core sample return mission has yet been conducted to another planetary body, it remains unclear as to how to assess the cores for rock quality. In this report, we describe the development of a metric designed to quantitatively assess the mechanical quality of any rock cores returned from Mars (or other planetary bodies). We report on the process by which we tested the metric on core samples of Mars analogue materials, and the effectiveness of the core assessment metric (CAM) in assessing rock core quality before and after the cores were subjected to shocking (g forces representative of an EEV landing).

Mars samples↗

Probabilistic Round Trip Contamination Analysis of a Mars Sample Acquisition and Handling Process Using Markovian Decompositions

A method for evaluating the probability of a Viable Earth Microorganism (VEM) contaminating a sample during the sample acquisition and handling (SAH) process of a potential future Mars Sample Return mission is developed. A scenario where multiple core samples would be acquired using a rotary percussive coring tool, deployed from an arm on a MER class rover is analyzed. The analysis is conducted in a structured way by decomposing sample acquisition and handling process into a series of discrete time steps, and breaking the physical system into a set of relevant components. At each discrete time step, two key functions are defined: The probability of a VEM being released from each component, and the transport matrix, which represents the probability of VEM transport from one component to another. By defining the expected the number of VEMs on each component at the start of the sampling process, these decompositions allow the expected number of VEMs on each component at each sampling step to be represented as a Markov chain. This formalism provides a rigorous mathematical framework in which to analyze the probability of a VEM entering the sample chain, as well as making the analysis tractable by breaking the process down into small analyzable steps.

Hudson, Nicolas↗

Experimental Results of Rover-Based Coring and Caching

Experimental results are presented for experiments performed using a prototype rover-based sample coring and caching system. The system consists of a rotary percussive coring tool on a five degree-of-freedom manipulator arm mounted on a FIDO-class rover and a sample caching subsystem mounted on the rover. Coring and caching experiments were performed in a laboratory setting and in a field test at Mono Lake, California. Rock abrasion experiments using an abrading bit on the coring tool were also performed. The experiments indicate that the sample acquisition and caching architecture is viable for use in a 2018 timeframe Mars caching mission and that rock abrasion using an abrading bit may be feasible in place of a dedicated rock abrasion tool.

coring↗

A lunar differentiation model in light of new chemical data on Luna 20 and Apollo 16 soils.

Fines from a Luna 20 soil sample and from three Apollo 16 deep drill core samples have been analyzed for major-minor element abundances by a combined, semi-micro atomic absorption spectrophotometric and colorimetric method. Both the major element and large ion lithophile trace element abundances in these soils, the first from interior highland sites, are greatly influenced by the very high normative plagioclase content, being distinctly richer in Al and Ca, and poorer in K, P, Cr, Mn, Fe, and Ti, than most bulk soil samples from previous lunar missions. The relatively large compositional variations in the Apollo 16 core can be ascribed almost entirely to decreasing plagioclase with increasing depth. The chemical composition of the Luna 20 soil indicates less plagioclase and less KREEP than in the Apollo 16 soils. A lunar differentiation model is presented in which is made the suggestion that KREEP is the result of a second fusion event in a lunar crust consisting of early feldspathic cumulates and primary aluminous 'liquid.'

Nava, D. F.↗

Analytical study of comet nucleus samples

Analytical procedures for studying and handling frozen (130 K) core samples of comet nuclei are discussed. These methods include neutron activation analysis, x ray fluorescent analysis and high resolution mass spectroscopy.

Albee, A. L.↗

Preliminary Surface Thermal Design of the Mars 2020 Rover

The Mars 2020 rover, scheduled for launch in July 2020, is currently being designed at NASA's Jet Propulsion Laboratory. The Mars 2020 rover design is derived from the Mars Science Laboratory (MSL) rover, Curiosity, which has been exploring the surface of Mars in Gale Crater for over 2.5 years. The Mars 2020 rover will carry a new science payload made up of 7 instruments. In addition, the Mars 2020 rover is responsible for collecting a sample cache of Mars regolith and rock core samples that could be returned to Earth in a future mission. Accommodation of the new payload and the Sampling Caching System (SCS) has driven significant thermal design changes from the original MSL rover design. This paper describes the similarities and differences between the heritage MSL rover thermal design and the new Mars 2020 thermal design. Modifications to the MSL rover thermal design that were made to accommodate the new payload and SCS are discussed. Conclusions about thermal design flexibility are derived from the Mars 2020 preliminary thermal design experience.

Novak, Keith S.↗

Apollo 14: Some geochemical aspects

Chemical analyses were obtained for five samples of Apollo 14 regolith fines, three 14230 core samples, soil clod 14049, breccias 14305 and 14319, 14310 basalt, and some separated phases. The chemical uniformity of these Apollo 14 samples indicates thorough mixing and/or uniform source rocks. Basalt 14310 can be matched well in composition by a four to one mixture of soil and plagioclase. The Eu(2+)/Eu(3+) ratios calculated for 14310 pigeonite and plagioclase are similar to those for Apollo 12 and 15 mare-type basalt phases; this indicates similar redox conditions. Apollo 14 samples are chemically similar to Apollo 12 and 15 KREEP as distinct from Apollo 11, 12, and 15 and Luna 16 mare-type basalts.

Philpotts, J. A.↗

Apollo 16 special samples, part B

Information is presented concerning special samples which were collected for specific investigations. The methods of sample collection are described along with fillet and core samples.

Hoerz, F.↗

Apollo 14 - Some geochemical aspects.

Chemical analyses have been obtained for five samples of Apollo 14 regolith fines, three 14230 core samples, 14049 soil clod, 14305 and 14319 breccias, 14310 basalt, and some separated phases. The chemical uniformity of these Apollo 14 samples indicates thorough mixing and/or uniform source rocks. Basalt 14310 can be matched well in composition by a four-to-one mixture of soil and plagioclase. Eu(2+)/Eu(3+) ratios calculated for 14310 pigeonite and plagioclase are similar to those for Apollo 12 and 15 mare-type basalt phases; this indicates similar redox conditions. The investigated Apollo 14 samples are chemically similar to Apollo 12 and 15 KREEP as distinct from Apollo 11, 12, and 15, and Luna 16 mare-type basalts. A relationship between the two types of basalt, in which mare-basalts would represent fused cumulates, is suggested.

Philpotts, J. A.↗

Geophysical, geochemical, and geological investigations of the Dunes geothermal system, Imperial Valley, California

The Dunes anomaly is a water-dominated geothermal system in the alluvium of the Salton Trough, lacking any surface expression. It was discovered by shallow-temperature gradient measurements. A 612-meter-deep test well encountered several temperature-gradient reversals, with a maximum of 105 C at 114 meters. The program involves surface geophysics, including electrical, gravity, and seismic methods, down-hole geophysics and petrophysics of core samples, isotopic and chemical studies of water samples, and petrological and geochemical studies of the cores and cuttings. The aim is (1) to determine the source and temperature history of the brines, (2) to understand the interaction between the brines and rocks, and (3) to determine the areal extent, nature, origin, and history of the geothermal system. These studies are designed to provide better definition of exploration targets for hidden geothermal anomalies and to contribute to improved techniques of exploration and resource assessment.

Elders, W. A.↗

Apollo drill core depth relationships

Preliminary depth relationships are presented for the Apollo 15, 16, and 17 drill core samples. For a given depth in any of these drill stems, the in situ lunar surface depth can be estimated. Ranges of uncertainty are also established, based on percent core recovery and degree of sample disturbance. The most likely explanation for the sample disturbance observed in the top three sections of the Apollo 16 drill stem is sample migration after the stem was capped on the lunar surface; essentially no sample was lost. Similar disturbance occurred in the Apollo 17 drill core, although to a lesser degree. The average original bulk densities (i.e., before any disturbance occurred) of the Apollo 15, 16, and 17 drill cores are 1.76, 1.59, and 1.87 g/cu cm, respectively. The Apollo 15 and 17 values are probably close to the in situ values; but the Apollo 16 average in situ density could be as much as 13% less than the already low density in the drill core.

Carrier, W. D., III↗

Exploring A Lunar Landslide Deposit In The Taurus-Littrow Valley (TLV). Variations In Mineralogy And Mineral Volatile Traps.

The double drive tube core sample (73001/73002), collected at Station 3 during the Apollo 17 mission, penetrated a lunar landslide deposit that was transported from the slope of the South Massif into the TLV (Figure 1). Orbital data suggest that this deposit represents multiple events that were triggered by movement along the Lee-Lincoln scarp [e.g., 1] or impact events [e.g., 2,3]. Although numerous core and trench samples were collected during the Apollo pro-gram and numerous landslide deposits have been identified on the lunar surface by orbital missions [e.g., 3], the Station 3 double drive tube is the only core that penetrated a landslide deposit. The intentions of our study are: to establish the stratigraphy of the deposit; to better understand the processes at work during the event(s), including the role of volatiles in the event(e.g., fluidization-enabled flow, escape of fluidizing volatiles) [1] and the capability of deposits for trapping indigenous volatiles; the number of landslide events; and the trigger(s) of such events. Here, we report some initial petrologic observations of the < 1mm fraction of the regolith. A companion abstract [4] emphasizes <1 mm lithic fragments, compares them to surface lithologies, and to > 4 mm lithic fragments.

M J Cato↗

Visual Feedback for Rover-based Coring

Technology for coring from a low-mass rover has been developed to enable core sample acquisition where a planetary rover experiences moderate slip during the coring operation. A new stereo vision technique, Absolute Motion Visual Odometry, is used to measure rover slip during coring and the slip is accommodated through corresponding arm pose updating. Coring rate is controlled by feedback of themeasured force of the coring tool against the environment. Test results in the JPL Marsyard show for the first time that coring from a low-mass rover with slip is feasible.

sampling↗