Search NASASearch

SEARCH · Search NASA

Results for “coronal density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

The coronal and transition region temperature structure of a solar active region

Using measurements of EUV and X-ray spectral lines, the differential emission measure vs electron temperature from the transition region to the corona of an active region (electron temperature between 100,000 and 5,000,000 K) is derived. The total emission measure and radiative losses are of the order 3 x 10 to the 48th/cu cm and 4 x 10 to the 26th ergs/sec, respectively. The emission measure at electron temperatures greater than approximately 1,000,000 K (i.e. that mainly responsible for the X-ray emission) is about 75% of the total. The use of the Mg x line at 625 A as an indicator of coronal electron density is also examined. A set of theoretical energy balance models of coronal loops in which the loop divergence is a variable parameter is presented and compared with the observations.

Levine, R. H.

Analysis of extreme-ultraviolet observations of a polar coronal hole

Emission gradient curves for extreme-ultraviolet resonance lines of lithiumlike ions have been constructed from spectroheliograms of a northern polar coronal hole observed on August 14, 1973, with the Harvard experiment on Skylab. An emission-measure analysis indicates both reduced density and coronal temperature in the coronal hole. The boundary geometry of the coronal hole is determined, and a temperature-density model that is consistent with the observed intensities is constructed. The model gives a conductive flux of 60,000 erg/sq cm per sec at 1.03 solar radii. The boundary geometry and density distribution are combined with typical solar-wind parameters at the earth to determine an outflow velocity of 15 km/s at 1.08 solar radii.

Mariska, J. T.

A two-fluid model of the solar wind

A method is presented for the integration of the two-fluid solar-wind equations which is applicable to a wide variety of coronal base densities and temperatures. The method involves proton heat conduction, and may be applied to coronal base conditions for which subsonic-supersonic solar wind solutions exist.

Sandbaek, O.

The Lyman alpha coronagraph

The rocket-borne Lyman alpha coronagraph (RLAC) is to be used in the absence of a natural solar eclipse to determine coronal temperatures from measurements of the line width of Lyman-alpha and to determine neutral hydrogen densities of coronal material from the absolute intensity. The coronagraph consists of a 75-cm Fastie-Ebert scanning spectrometer with an AMR 641 photoelectric detection system, an off-axis parabolic primary mirror, and an occulting system. A special optical arrangement achieves rejection of radiation from the solar disk.

Kohl, J. L.

A two-fluid solar wind model with Alfven waves - Parameter study and application to observations

The effects of Alfven waves from the inner corona on the solar wind density profile, flow velocity and on the random motion of protons are studied. Different base densities, temperatures, and wave velocity amplitudes, as well as different flow geometries, are considered. The model calculations are compared to simultaneous observations of the electron density profile and the resonantly scattered Lyman alpha line. Present observations, out to 4 solar radii, can be used to place limits on the coronal base density and temperature, and put an upper limit on the wave amplitude. It is pointed out that future observations of the electron density and the Lyman alpha line, out to larger heliocentric distances, and of lines from heavier elements, should be used to place more stringent constraints on the amplitudes of MHD waves in the corona.

Esser, R.

Large-scale solar and heliospheric magnetic fields

The magnetic structure of the extended solar corona varies with the changing photospheric field during the solar cycle. A simple potential model of the corona using solar surface observations from 1976 to the present shows how the large-scale coronal field evolves over more than a solar activity cycle. These predictions match well with large stable structures inferred from measurements of coronal electron density and the IMF, though dynamic changes are poorly modeled. The sun's polar field was about 25 stronger at solar minimum in 1986 than in 1976; the heliospheric current sheet was also flatter. In Cycle 21 the coronal and photospheric large-scale long-lived field patterns rotated every 26.9 days in the northern hemisphere; the southern field rotated every 28 days. Similar periods have been present in the IMF and in the occurrence of solar flares during the last several solar cycles.

Hoeksema, J. Todd

Time delay occultation data of the Helios spacecraft for probing the electron density distribution in the solar corona

S-band time delay measurements were collected from the spacecraft Helios A and B during three solar occultations in 1975/76 within heliocentric distances of about 3 and 215 earth radius in terms of range, Doppler frequency shift, and electron content. Characteristic features of measurement and data processing are described. Typical data sets are discussed to probe the electron density distribution near the sun (west and east limb as well) including the outer and extended corona. Steady-state and dynamical aspects of the solar corona are presented and compared with earth-bound-K-coronagraph measurements. Using a weighted least squares estimation, parameters of an average coronal electron density profile are derived in a preliminary analysis to yield electron densities at r = 3, 65, 215 earth radius. Transient phenomena are discussed and a velocity of propagation v is nearly equal to 900 km/s is determined for plasma ejecta from a solar flare observed during an extraordinary set of Helios B electron content measurements.

Edenhofer, P.

Physical Properties of a Coronal Hole from a Coronal Diagnostics Spectrometer, Mauna Loa Coronagraph, and LASCO Observations during the Whole Sun Month

Until recently, inference of electron density distribution in the solar corona was limited by the field of view of white-light coronagraphs (typically out to 6 Rs). Now, for the first time we have a series of white- light coronagraphs (SOHO/LASCO) whose combined field of view extends from 1.1 - 30 Rs. Quantitative information on electron density distribution of coronal hole and coronal plumes/rays are estimated by using white-light, polarized brightness (pB) observations from the SOHO/LASCO/C2 and C3 and HAO/Mauna Loa Mark III coronagraphs from 1.15 to 8.0 Rs. Morphological information on the boundary of the polar coronal hole and streamer interface is determined from the white-light observations in a manner similar to the Skylab polar coronal hole boundary estimate. The average coronal hole electron density in the region 1 - 1.15 Rs is estimated from the density-sensitive EUV line ratios of Si IX 3501342 A observed by the SOHO/coronal diagnostic spectrometer (CDS). We combine these numbers with the estimate from white-light (WL) observations to obtain a density profile from 1 to 8 Rs for the plumes and the polar coronal hole. We find that white light and spectral analysis produce consistent density information. Extrapolated densities inferred from SOHO observations are compared to Ulysses in situ observations of density. Like the density inferred from the Spartan 201-03 coronagraph, the current SOHO density profiles suggest that the acceleration of the fast solar wind takes place very close to the Sun, within 10-15 Rs. The density information is used to put constraints on solar wind flow velocities and effective temperatures. Finally, these results are compared to the recent analysis of the Spartan 201-03 white-light observations.

Guhathakurta, M.

Time delay occultation data of the Helios spacecrafts and preliminary analysis for probing the solar corona

S-band time delay measurements were collected from the spacecrafts Helios A and B during three solar occultations in 1975/76 within heliocentric distances of about 3 and 215 solar radii in terms of range, Doppler frequency shift, and electron content. A description is given concerning some characteristic features of the methods of measurement and data processing. Typical data sets are discussed to probe the electron density distribution near the sun (west and east limb as well) including the outer and extended corona. Steady-state and dynamical aspects of the solar corona are presented and compared with earth-bound K-coronagraph measurements. Using a weighted least squares estimation 3 parameters of an average coronal electron density profile are derived in a preliminary analysis to yield electron densities of about 130 billion; 100 million; 7 million/cu m at r?3; 65; 215 solar radii. Transient phenomena are discussed and a velocity of propagation v approximately 900 km/s for plasma ejecta from a solar flare is determined from an extraordinary set of Helios B electron content measurements on April 30/May 1, 1976.

Edenhofer, P.

On the hard X-ray spatial structure during the impulsive phase of solar flares

A simplified form of the bremsstrahlung cross-section is used to obtain an analytic expression for the intensity of electron-beam-produced hard X-ray emission with depth in solar flares which can be used in a first-order analysis of imaging data. The results indicate that the conditions for the appearance of bright footpoint emission, in terms of loop parameters such as density and length, are much less restrictive than previously suggested. The analysis shows that the observed footpoint structure of many flares in hard X-rays is consistent with the thick-target bombardment model, and that the intensity of the footpoint emission relative to the spatially integrated flux can be used as a diagnostic tool of coronal column density.

Emslie, A. Gordon

Long-term variations of selected solar wind properties - IMP 6, 7, and 8 results

Studies of the variability of the solar wind are extended to include the minimum of solar cycle 20; attention is given to the He abundance, the relative He-H velocity difference, the He-H temperature ratio, the solar coronal proton density, speed, rms velocity variation, temperature and number flux, and the kinetic and total energy fluxes. The solar wind data are from observations conducted by the IMP-6, -7 and -8 satellites. A well-developed corotating stream structure appearing in January 1973 and disappearing in mid-1976 receives particular consideration. An increase in proton number and total energy fluxes after September 1972 may be due to areal expansion of both polar coronal holes, and may be associated with compression of the low-speed equatorial disk-shaped region postulated to surround the sun in interplanetary space.

Feldman, W. C.

Explosive plasma flows in a solar flare

Solar Maximum Mission soft X-ray data and Sacramento Peak Observatory H-alpha observations are combined in a study of the impulsive phase of a solar flare. A blue asymmetry, indicative of upflows, was observed in the coronal Ca XIX line during the soft X-ray rise phase. A red asymmetry, indicative of downflows, was observed simultaneously in chromospheric H-alpha emitted from bright flare kernels during the period of hard X-ray emission. Combining the velocity data with a measurement of coronal electron density, it is shown that the impulsive phase momentum of upflowing soft X-ray-emitting plasma equalled that of the downflowing H-alpha-emitting plasma to within one order of magnitude. In particular, the momentum of the upflowing plasma was 2 x 10 to the 21st g cm/s while that of the downflowing plasma was 7 x 10 to the 21st g cm/s, with a factor of 2 uncertainty on each value. This equality supports the explosive chromospheric evaporation model of solar flares, in which a sudden pressure increase at the footprint of a coronal loop produces oppositely directed flows in the heated plasma.

Zarro, Dominic M.

Tracking Nonradial Outflows in Extreme Ultraviolet and White Light Solar Images

Understanding the solar corona requires knowledge of its dynamics through its various layers and subsequent connectivity to the heliosphere. This requires understanding the nature of the outflows and the physical transitions through the middle corona (∼1.5–6.0 Rs). While this region is still inaccessible to in situ measurements, remote sensing observations are available, but their interpretation can be controversial due to line-of-sight effects and the nonradial motion of outflowing structures close to the Sun (≤3.0 Rs). In this work, we describe a method to mitigate these challenges by generating nonradial height–time profiles of outflows by using advanced image processing techniques. The northern and southern boundaries of a large equatorial streamer during the 2008 solar minimum were identified in STEREO/SECCHI solar images, using two different methodologies based on thresholds of brightness and piecewise polynomial function fitting. To address line-of-sight issues, we used tomographic reconstruction of the 3D distribution of the coronal electron density based on SECCHI/COR2 images. Spectral analysis of the time series of the position angle of the streamer boundary revealed its oscillatory nature at some heights at 36–48 and 10.5–14.6 hr. Dividing the distance between the northern and southern streamer boundaries in equal parts at each height, we obtained nonradial height–time paths from which we generated nonradial profiles of corona/solar wind plasma outflow. We tracked outflows as they moved uninterruptedly from the Sun in EUVI, through COR1 and into COR2. Finally, we discuss the preliminary results of nonradial plane-of-sky velocities for a coronal mass ejection and two small-scale features.

Nathalia Alzate

Interplanetary gas. XVI.

Quiet solar wind model with magnetic field numerically calculated, obtaining coronal electron densities and angular momentum near earth

Brandt, J. C.

Interplanetary baseline observations of type 3 solar radio bursts

Simultaneous observations of type III radio bursts using spacecraft separated by several tenths of an AU were made using the solar orbiters HELIOS-A and -B. The burst beginning at 1922 UT on March 28, 1976, was located from the intersection of the source directions measured at each spacecraft, and from the burst arrival time differences. Wide baseline observations give the radial distance of the source at each observing frequency. Consequently, coronal electron densities and exciter velocity were determined directly, without the need to assume a density model as is done with single spacecraft observations. The separation of HELIOS-A and -B also provided the first measurements of burst directivity at low frequencies. For the March 28 burst, the intensity observed from near the source longitude (HELIOS-B) was significantly greater than from 60 W of the source (HELIOS-A).

Weber, R. R.