Search NASA⌕ Search

SEARCH · Search NASA

Results for “correction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Impact of DORISx Post Seismic Deformation and Seasonal Corrections on the DPOD2020 Solution

As one of the tracking systems used for the altimeter missions (such as TOPEX/Poseidon, Envisat, Jason-1/-2/-3, CryoSat-2, Saral/AltiKa, Sentinel-3A/-3B, HY-2A/C/D, Jason-CS/Sentinel-6A, SWOT), the position of the DORIS tracking stations provides a fundamental reference for the estimation of the precise orbits and so, by extension is fundamental for the quality of the altimeter data analysis and derived products. Due to the time evolution of the DORIS ground network, stations included in ITRF2020 may have been decommissioned and stations that were added to the tracking network after 2021.0 are, by definition, not part of ITRF2020. Therefore, to satisfy operational requirements for precise orbit determination and routine delivery of geodetic products, the International DORIS Service maintains the DORIS terrestrial reference frame for Precise Orbit Determination (DPOD) solutions. Since 2016, the DPOD products are computed by the IDS Combination Center (CC) as a DORIS cumulative position and linear velocity solution aligned to the latest available ITRF and using the latest IDS weekly combined series. Mid-2023, the IDS CC started the computation of the second version of the DPOD2020 based on the IDS 20 weekly solutions from 1993.0 to 2023.0. With that new solution, the IDS CC will include Post Seismic Deformation (PSD) corrections for some DORIS sites such as Socorro Island. These DPOD PSD corrections are determined from the analysis of DORIS coordinate time series only. The second version will also include optional annual and semi-annual station corrections. The presentation will describe the analysis used for extracting the PSD and seasonal DORIS station corrections, compare such corrections to those derived for ITRF2020, and evaluate the impact these new corrections have on station positioning and satellite POD.

Guilhem Moreaux↗
NASA NTRSDate not supplied

Leveraging ­ CPF Spectral Information for Effective Angular Corrections in Sensor Inter-calibration Studies

The Climate Absolute Radiance and Refractivity Observatory Pathfinder (CPF) mission will provide a high-accuracy (0.3% radiometric uncertainty at k=1) SI-traceable on-orbit calibration reference for sensor intercalibration in reflective solar spectral region. CPF inter-calibration algorithms have been developed to address various sampling differences between CPF and target sensors, particularly in spectral, angular, spatial and temporal domains. CPF provides unique hyper-spectral measurements that allow the utilization of rich spectral information for critical inter-calibration procedures including angular correction and spectral-gap filling. The angular correction scheme of CPF mission has been constructed based on the spectral correlation relationship between CPF observed spectra and the spectra to be measured at the viewing/sun geometry angles of target sensors. The angular correction relationship is both angular and scene dependent. The scene variability issue can impose undesired uncertainties that complicates the correction for those errors. We have demonstrated that hyper-spectral radiance information can be well utilized to identify different scene types associated with CPF observations. Using spectral radiances-based scene clustering analysis can greatly reduce the uncertainty associated with the angular correction algorithm. Additionally, a reliable quality control scheme has been established, utilizing spectral similarity and regression-prediction error analyses, to ensure the successful and efficient implementation of the angular correction method.

Wan Wu↗
NASA NTRS2012

Continental-scale Validation of MODIS-based and LEDAPS Landsat ETM+ Atmospheric Correction Methods

The potential of Landsat data processing to provide systematic continental scale products has been demonstrated by several projects including the NASA Web-enabled Landsat Data (WELD) project. The recent free availability of Landsat data increases the need for robust and efficient atmospheric correction algorithms applicable to large volume Landsat data sets. This paper compares the accuracy of two Landsat atmospheric correction methods: a MODIS-based method and the Landsat Ecosystem Disturbance Adaptive Processing System (LEDAPS) method. Both methods are based on the 6SV radiative transfer code but have different atmospheric characterization approaches. The MODIS-based method uses the MODIS Terra derived dynamic aerosol type, aerosol optical thickness, and water vapor to atmospherically correct ETM+ acquisitions in each coincident orbit. The LEDAPS method uses aerosol characterizations derived independently from each Landsat acquisition and assumes a fixed continental aerosol type and uses ancillary water vapor. Validation results are presented comparing ETM+ atmospherically corrected data generated using these two methods with AERONET corrected ETM+ data for 95 10 km×10 km 30 m subsets, a total of nearly 8 million 30 m pixels, located across the conterminous United States. The results indicate that the MODIS-based method has better accuracy than the LEDAPS method for the ETM+ red and longer wavelength bands.

Landsat↗
NASA NTRS2013

Statistical Downscaling and Bias Correction of Climate Model Outputs for Climate Change Impact Assessment in the U.S. Northeast

Statistical downscaling can be used to efficiently downscale a large number of General Circulation Model (GCM) outputs to a fine temporal and spatial scale. To facilitate regional impact assessments, this study statistically downscales (to 1∕8deg spatial resolution) and corrects the bias of daily maximum and minimum temperature and daily precipitation data from six GCMs and four Regional Climate Models (RCMs) for the northeast United States (US) using the Statistical Downscaling and Bias Correction (SDBC) approach. Based on these downscaled data from multiple models, five extreme indices were analyzed for the future climate to quantify future changes of climate extremes. For a subset of models and indices, results based on raw and bias corrected model outputs for the present-day climate were compared with observations, which demonstrated that bias correction is important not only for GCM outputs, but also for RCM outputs. For future climate, bias correction led to a higher level of agreements among the models in predicting the magnitude and capturing the spatial pattern of the extreme climate indices. We found that the incorporation of dynamical downscaling as an intermediate step does not lead to considerable differences in the results of statistical downscaling for the study domain.

extreme climate index↗
NASA NTRS2018

An Accurate Method for Correcting Spectral Convolution Errors in Intercalibration of Broadband and Hyperspectral Sensors

The intercalibration between a broadband and a hyperspectral satellite Earth observation system requires the convolution of the hyperspectral data with the spectral response functions (SRFs) of the corresponding broadband channels. There are two potential issues associated with the convolution procedure. First, the finite resolution of a hyperspectral spectrum, that is, the deviation from the highly accurate line-by-line monochromatic radiances, will contribute to convolution errors. The magnitude of the errors depends on the spectral resolution and the SRF shape of the hyperspectral instrument. This type of the convolution error has not been well recognized, and there is a lack of corresponding discussion in most published papers. Although it is small as compared with the instrument accuracy of existing hyperspectral sounders, the error is deemed to be signicant when it is compared with the stringent calibration requirement imposed by future climate missions like the Climate Absolute Radiance and Refractivity Observatory (CLARREO). Second, some broadband channels are insufficiently covered by the hyperspectral data, causing spectral gaps that lead to convolution errors. Although several methods have been developed to fill the spectral gaps and hence compensate for the second type of convolution error, the correction accuracy may still need improvement especially when a large spectral gap needs to be lled. This paper presents a methodology to accurately quantify and compensate for both types of convolution errors. This methodology utilizes the available hyperspectral information to correct the scene-dependent convolution errors due to either the limited spectral resolution or spectral gaps. We use simulations to characterize the intercalibration errors between the Moderate resolution Imaging Spectroradiometer (MODIS) and current operational infrared sounders. We demonstrate that convolution errors can be effectively removed to meet the highly accurate intersatellite calibration requirement proposed by the Climate Absolute Radiance and Refractivity Observatory. Our methodology is also validated using real satellite data for the intercalibration between Aqua MODIS and Aqua Atmospheric Infrared Sounders (AIRS). Our study demonstrates that the accurate characterization and correction for the convolution errors greatly reduces the scene-dependent and spectrally dependent errors, being critical to the consistency check between Infrared Atmospheric Sounding Interferometer (IASI) and AIRS using the double-difference method. The convolution correction also facilitates the evaluation for other intercalibration errors (e.g., the drift of MODIS SRFs). Our derived SRF shift values from MODIS-AIRS (after convolution error corrections) and from MODIS-IASI intercalibration are consistent with each other. We further extend the methodology to study the calibration of a broadband channel which is either completely or largely uncovered bya hyperspectral measurement.The large spectral gap-filling methodology is validated by demonstrating the accurate prediction of the MODIS radiance of band 29 using the Cross-track Infrared Sounder spectra, with the real IASI spectral data being used as the reference.

Correction Method↗
NASA NTRS1974

Augmented burst-error correction for UNICON laser memory

A single-burst-error correction system is described for data stored in the UNICON laser memory. In the proposed system, a long fire code with code length n greater than 16,768 bits was used as an outer code to augment an existing inner shorter fire code for burst error corrections. The inner fire code is a (80,64) code shortened from the (630,614) code, and it is used to correct a single-burst-error on a per-word basis with burst length b less than or equal to 6. The outer code, with b less than or equal to 12, would be used to correct a single-burst-error on a per-page basis, where a page consists of 512 32-bit words. In the proposed system, the encoding and error detection processes are implemented by hardware. A minicomputer, currently used as a UNICON memory management processor, is used on a time-demanding basis for error correction. Based upon existing error statistics, this combination of an inner code and an outer code would enable the UNICON system to obtain a very low error rate in spite of flaws affecting the recorded data.

Lim, R. S.↗
NASA NTRS1976

Correction factory techniques for improving aerodynamic prediction methods

A method for correcting discrete element lifting surface theory to reflect given experimental data is presented. Theoretical pressures are modified such that imposed constraints are satisfied while minimizing the changes to the pressures. Several types of correction procedures are presented and correlated; (1) scaling of pressures; (2) scaling of downwash values; and (3) addition of an increment to the downwash that is proportioned to pressure. Some special features are included in these methods and they include: (1) consideration of experimental data from multiple deflection modes, (2) limitation of the amplitudes of the correction factors, and (3) the use of correction factor mode shapes. These methods are correlated for cases involving all three Mach Number ranges using a FORTRAN IV computer program. Subsonically, a wing with an oscillating partial span control surface and a wing with a leading edge droop are presented. Transonically a two-dimensional airfoil with an oscillating flap is considered. Supersonically an arrow wing with and without camber is analyzed. In addition to correction factor methods an investigation is presented dealing with a new simplified transonic modification of the two-dimensional subsonic lifting surface theory. Correlations are presented for an airfoil with an oscillating flap.

Giesing, J. P.↗
NASA NTRS1975

Correction of burst errors containing bit slippages for cyclic block codes

A technique is presented for correction of an (n,k) cyclic block code subjected to a noise disturbance consisting of an arbitrary number of both bit deletions and bit inversions contained within a single error burst. Following the procedure described by Meggitt (1961), the correction of a b-bit burst is attempted by first loading the initial error syndrome into an (n-k) order feedback shift register with taps selected for the code's generating polynomial; the register is then successively shifted one bit position in the direction of lower order. The discussion covers burst correction with m-bit deletion, burst/deletion decoder implementation, false correction probability, and bit slippage involving bit insertions. The principal elements of the burst/deletion correction decoder are presented in schematic form.

Green, E. P.↗
NASA NTRS1977

Proving the correctness of a flight-director program for an airborne minicomputer

Program verification procedures are described and used to determine the correctness of a program written for an airborne computer. The basic method relies on the inductive assertion method of Floyd (1967), modified and extended for application to a machine-language situation. Correctness considerations in the flight director program include self-modification, system correctness, executable instructions, overflow, approximate calculations with fractional quantities, and fixed point scaling. An example proof of correctness, which proceeds by proving the correctness of a certain subroutine, is provided.

Maurer, W. D.↗
NASA NTRS1980

Determination of an angle of attack sensor correction for a general aviation airplane at large angles of attack as determined from wind tunnel and flight tests

A comprehensive investigation into the flow correction for an angle of attack sensor mounted ahead of the wing tip of a general aviation research airplane has been conducted at the Langley Research Center. This correction has been determined in wind tunnels using a full-scale model up to angles of attack of 45 deg and a 1/5-scale model up to 80 deg angle of attack. The flow correction has also been obtained in flight by using a standard technique at low angles of attack and in spinning flight at larger angles of attack, by using both a simple approximate technique and a parameter estimation technique. The results show the correction is significant, reaching 10 deg at a measured angle of attack of about 90 deg. The flow correction was sensitive to the angle of sideslip at measured angles of attack greater than 60 deg and was not influenced by wing leading-edge modifications or aileron deflections.

Moul, T. M.↗
NASA NTRS1982

Some ideas and opportunities concerning three-dimensional wind-tunnel wall corrections

Opportunities for improving the accuracy and reliability of wall corrections in conventional ventilated test sections are presented. The approach encompasses state-of-the-art technology in transonic computational methods combined with the measurement of tunnel-wall pressures. The objective is to arrive at correction procedures of known, verifiable accuracy that are practical within a production testing environment. It is concluded that: accurate and reliable correction procedures can be developed for cruise-type aerodynamic testing for any wall configuration; passive walls can be optimized for minimal interference for cruise-type aerodynamic testing (tailored slots, variable open area ratio, etc.); monitoring and assessment of noncorrectable interference (buoyancy and curvature in a transonic stream) can be an integral part of a correction procedure; and reasonably good correction procedures can probably be developd for complex flows involving extensive separation and other unpredictable phenomena.

Rubbert, P. E.↗
NASA NTRS1982

The Seasat altimeter wet tropospheric range correction

It is found that the difference between the wet tropospheric corrections obtained with the Seasat Multichannel Microwave Radiometer (SMMR) algorithm and corrections based on near-coincident radiosonde meteorological measurements has a standard deviation of 2.79 cm, which is consistent with the independent value for water vapor determination accuracy reported by the SMMR Evaluation Team. Because the difference between the radiosonde corrections and those obtained by means of interpolated surface meteorological data has a standard deviation of 5.73 cm, the SMMR wet tropospheric correction is recommended for investigations sensitive to the wet tropospheric height correction accuracy.

Tapley, B. D.↗
NASA NTRS1984

Bidirectional reflectance spectroscopy. III - Correction for macroscopic roughness

A mathematically rigorous formalism is derived by which an arbitrary photometric function for the bidirectional reflectance of a smooth surface may be corrected to include effects of general macroscopic roughness. The correction involves only one arbitrary parameter, the mean slope angle, and is applicable to surfaces of any albedo. Using physically reasonable assumptions and mathematical approximations, the correction expressions are evaluated analytically to second order in the mean slope angle. The correction is applied to the bidirectional-reflectance function of Hapke (1981). Expressions for both the differential and integral brightnesses are obtained. Photometric profiles on hypothetical smooth and rough planets of low and high albedo are shown to illustrate the effects of macroscopic roughness. The theory is applied to observations of Mercury and predicts the integral phase function, the apparent polar darkening, and the lack of limb brightness surge on the planet. The roughness-corrected bidirectional-reflectance function is sufficiently simple that it can be conveniently evaluated on a programmable hand-held calculator.

Hapke, B.↗
NASA NTRS1983

Geometric correction process for the Landsat-4 Thematic Mapper

The processing approaches which form the basis of the Landsat-4 Thematic Mapper (TM) geometric correction system are summarized. The correction is accomplished in two phases. In the first phase, correction data are generated. The spacecraft position, TM frame attitude, TM scanning mirror position, and detector sampling are found as a function of time through a combination of flight segment measurements, ground segment modeling, and control point information. The data, along with the earth position and geoid model, are used to determine the earth location for each TM image sample. Then, using map projections, correction data can be generated which define the location of each TM image sample on the output coordinate system. In the second phase, the correction data are used to resample TM detector samples onto the output coordinate system.

Beyer, E. P.↗
NASA NTRS1985

Thematic Mapper radiometric correction research and development results and performance

The present paper has the objective to discuss three modifications made to the Thematic Mapper Image Processing System (TIPS) radiometric correction process during the R&D period, before turnover of the Landsat Ground Segment to the National Oceanic and Atmospheric Administration. The R&D period was to enhance the correction performance of the ground processing of Thematic Mapper (TM) data, taking into account the correction of sensor anomalies. In the context of a brief review of the major steps in TM radiometric correction, a description is provided of the approaches employed to overcome the effects of the Landsat-5 light leak and the saturated calibration lamp states. Attention is also given to scene content correction limitations, and a performance bench mark.

Singh, A.↗
NASA NTRS1986

Upgrading telescopes by active pupil wavefront correction

Exit pupil correction of the Large Deployable Reflector's (a proposed IR to sub-mm space telescope) segmented primary can be done by reimaging it onto a like segmented surface at the exit pupil. This allows the primary to be more flexible, the adaptive element to be smaller, and the supporting structure to be cheaper than if all correction were performed at a stiffly supported primary. Piston, tilt, and decenter errors of an annulus of the primary and the equations for the required corrections are considered. To verify these, the perturbations with spline functions in the lens design program are simulated. Strehl ratios used to measure image quality show that a piston error of 1 mm is fully corrected over a 5 arcmin field for an f/10 system with a 0.7 n.a. primary at 30 micrometers. Limits of correction are also shown for tilt and decenter errors of segments. Tolerances are given for tilt and decenter errors of the remaining optics also.

Stacy, J. E.↗
NASA NTRS1988

Wind tunnel-sidewall-boundary-layer effects in transonic airfoil testing-some correctable, but some not

The need to correct transonic airfoil wind tunnel test data for the influence of the tunnel sidewall boundary layers, in addition to the wall accepted corrections for the analytical investigation was carried out in order to evaluate sidewall boundary layer effects on transonic airfoil characteristics, and to validate proposed correction and the limit to their applications. This investigation involved testing of modern airfoil configurations in two different transonic airfoil test facilities, the 15 x 60 inch two-dimensional insert of the National Aeronautical Establishment (NAE) 5 foot tunnel in Ottawa, Canada, and the two-dimensional test section of the NASA Langley 0.3 m Transonic Cryogenic Tunnel (TCT). Results presented included effects of variations in sidewall-boundary layer bleed in both facilities, different sidewall boundary layer correction procedures, tunnel-to tunnel comparisons of correcte results, and flow conditions with and without separation.

Lynch, F. T.↗
NASA NTRS1988

Nonadiabatic, momentum-dependent, and energy-dependent corrections in the effective-potential description for low-energy scattering of spinless systems - Their relations and validity

In the effective-potential description for low-energy scattering involving a spinless complex (a body with internal structure), the nonadiabatic corrections are sometimes disguised in momentum-dependent terms. These are distinct from energy-dependent corrections. A general procedure is given here by which all the momentum-dependent corrections can be converted into nonadiabatic corrections in truly local form. Circumstances under which an expansion of the effective potential, in terms of the adiabatic term plus nonadiabatic and energy-dependent corrections is allowed and forbidden, are discussed. An example for the latter is in the case of near degeneracy in the spectrum of the complex or in the extrapolation of the effective potential to short-distance behavior. This indicates that certain claims of 'saturation effect' at short distances in low-energy electron-atom scattering are invalid.

Au, C. K.↗