Results for “delivery accuracy” — Page 5

NASA NTRS2012

Mars Science Laboratory Navigation Results

The Mars Science Laboratory (MSL), carrying the Curiosity rover to Mars, was launched on November 26, 2011, from Cape Canaveral, Florida. The target for MSL was selected to be Gale Crater, near the equator of Mars, with an arrival date in early August 2012. The two main interplanetary navigation tasks for the mission were to deliver the spacecraft to an entry interface point that would allow the rover to safely reach the landing area, and to tell the spacecraft where it entered the atmosphere of Mars, so it could guide itself accurately to close proximity of the landing target. MSL used entry guidance as it slowed down from the entry speed to a speed low enough to allow for a successful parachute deployment, and this guidance allowed shrinking the landing ellipse to a 99% conservative estimate of 7 by 20 kilometers. Since there is no global positioning system in Mars, achieving this accuracy was predicated on flying a trajectory that closely matched the reference trajectory used to design the guidance algorithm, and on initializing the guidance system with an accurate Mars-relative entry state that could be used as the starting point to integrate the inertial measurement unit data during entry and descent. The pre-launch entry flight path angle (EFPA) delivery requirement was +/- 0.20 deg, but after launch a smaller threshold of +/- 0.05 deg was used as the criteria for late trajectory correction maneuver (TCM) decisions. The pre-launch requirement for entry state knowledge was 2.8 kilometers in position error and 2 meters per second in velocity error, but also smaller thresholds were defined after launch to evaluate entry state update opportunities. The biggest challenge for the navigation team was to accurately predict the trajectory of the spacecraft, so the estimates of the entry conditions could be stable, and late trajectory correction maneuvers or entry parameter updates could be waved off. As a matter of fact, the prediction accuracy was such that the last TCM performed was a small burn executed eight days before landing, and the entry state that was calculated just 36 hours after that TCM, and that was uploaded to the spacecraft the same day, did not need to be updated. The final EFPA was 0.013 deg shallower than the -15.5 deg target, and the on-board entry state was just 200 meters in position and 0.11 meters per second in velocity from the post-landing reconstructed entry state. Overall the entry delivery and knowledge requirements were fulfilled with a margin of more than 90% with respect to the pre-launch thresholds. This excellent accuracy contributed to a very successful and accurate entry, descent, and landing, and surface mission.

navigation↗

NASA NTRS1984

Galileo Jupiter approach orbit determination

Orbit determination characteristics of the Jupiter approach phase of the Galileo mission are described. Predicted orbit determination performance is given for the various mission events that occur during Jupiter approach. These mission events include delivery of an atmospheric entry probe, acquisition of probe science data by the Galileo orbiter for relay to earth, delivery of an orbiter to a close encounter of the Galilean satellite Io, and insertion of the orbiter into orbit about Jupiter. The orbit determination strategy and resulting accuracies are discussed for the data types which include Doppler, range, optical imaging of Io, and a new Very Long Baseline Interferometry (VLBI) data type called Differential One-Way Range (DOR).

Miller, J. K.↗

NASA NTRS2017

GEER Status Update

History: The Glenn Extreme Environments Rig (GEER) first became operational in the early part of 2015. Since that time GEER has completed a number of scientific tests and has undergone improvements in the chemical delivery system and analytics following a year of operations experience. Recent Updates: In June 2016, the GEER process system was rebuilt to provide a more robust system, higher accuracy and new capabilities. New insulation was installed on the exterior of the pressure vessel and gas lines. The newly revamped GEER plumbing system can provide extremely precise custom gas mixtures using any gas desired by the investigator in any combination. GEER can heat the resulting mixture up to 500 deg C and 1500 psia. The 304 stainless steel vessel walls were polished to reduce corrosion rate and reduce unwanted chemical reactions. The process lines were replaced with high purity Sulfinert coated tubing. The GEER team added the ability to individually boost specialty gases to GEER thus allowing operators to make very precise changes to the gas chemistry inside of GEER during a test while at high temperature and pressure. High accuracy mass flow meters were added to further improve gas mixing accuracy and precision. An in-line, integrated Inficon MicroGC Fusion was added for real time gas analysis along with a high purity gas sampling system, providing fully automated, real time analysis of the gas chemistry inside of GEER in minutes. This complements a co-located mass spectrometer and both are used for regular monitoring of the vessel chemistry. All internal vessel components were replaced with polished 304SS equivalents. Hot vent down capability was increased. Finally, an automated liquid injection system was added and is rated for max vessel operating conditions of (1500 psia, 500 C). Recent Results and Publications: In May 2016, GEER completed a test that exposed high temperature electronics to Venus surface conditions for 21.5 days. This demonstrated the potential for operating robotic spacecraft in the Venus environment without the need for thermal or environmental protection. Results from this test were published in December 2016 and received national media attention. In April 2017 GEER implemented an 80 day test at Venus surface conditions to simulate chemical weathering of expected Venus minerals. This test supported a ROSES award to a team led by Prof. Ralph Harvey of Case Western Reserve University. The test concluded in July 2017 and nearly doubled previous operation record of 42 days at Venus surface conditions. Preliminary results of these and previous experiments were presented at the recent Venus Modeling Workshop. In June 2017, NASA TM2017-219437 "Chemical and Microstructural Changes in Metallic and Ceramic Materials Exposed to Venusian Surface Conditions" was published. This report provides an extensive and valuable resource detailing the behavior of a variety of engineering materials at Venus surface conditions. Community Involvement: An external science advisory panel has been formed.

Kremic, Tibor↗

NASA NTRS2020

The MODIS RSB calibration and look-up-table delivery process for Collection 6 and 6.1

The Moderate Resolution Imaging Spectroradiometer (MODIS) instruments on-board the Aqua and Terra space-craft have provided valuable science data for the last 18 and 20 years, respectively. Each instrument is equipped with 36 spectral bands, 20 of which are reflective solar bands (RSBs). These bands cover a wavelength range of 0.4 – 2.2μm and are calibrated on-orbit using several on-board calibrators (OBCs), such as a solar diffuser (SD)and a solar diffuser stability monitor (SDSM), along with regularly-scheduled lunar observations through the space view (SV) port. The gain (1/m1) and response-verses-scan angle (RVS) are updated on a near-monthly basis and act as the primary look-up-tables (LUTs) for the RSB calibration. A set of separate uncertainty LUTs for each of the RSBs are also delivered regularly and incorporated into the Level 1B (L1B) product to generate a pixel-level Uncertainty Index (UI). In addition to the gain, RVS and uncertainty, there are several other LUTs associated with the reflective bands that are either updated less frequently or remain static. The accuracy of both the forward-predicted and historical RSB LUTs, which are derived by the MODIS Characterization Sup-port Team (MCST), is important in maintaining the quality and accuracy of the L1B and science products.To ensure a timely and accurate LUT update, MCST has established a comprehensive set of procedures. This paper provides an overview of the calibration process, along with the current LUT delivery process for the RSB sin Collection 6 (C6) and Collection 6.1 (C6.1). Improvements to be implemented in future collections are also discussed.

MODIS↗

NASA NTRS1994

A First Look at Orbit Determination for the Cassini Mission, Part 2: Saturn Tour

This paper completes the presentation of the first round of orbit determination analysis accomplished as part of Cassini navigation studies. The thrust of the analysis was to characterize operational orbit determination accuracy to first order for selected phases of the mission. The previous paper, Part 1, covered early phases from inner solar system cruise through the approach to Saturn and delivery of the Huygens probe to Titan. Part 2 resumes chronologically where Part 1 left off, covering the tour phase after delivery of the Huygens probe.

Cassini mission orbit determination Saturn Titan↗

NASA NTRS1979

Aerocapture vehicle mission design concepts for the inner and outer planets

The paper presents mission design concepts using an aerocapture vehicle for future missions to the inner and outer planets which require substantial payloads in orbit that can not be readily realized using the present Space Transportation System (STS). Aerocapture is a mission design technique that utilizes aerodynamically controlled atmospheric entry to capture payloads into orbit as opposed to a completely propulsive orbit insertion. Results are presented which demonstrate great performance gains and acceptable accuracy using aerocapture. Attention is also given to the potential for aerocapture vehicle system design commonality for different missions, in order to demonstrate the ability of aerocapture as an interplanetary delivery technique to substantially augment the STS performance capabilities.

Cruz, M. I.↗

NASA NTRS2011

Mars Science Laboratory Interplanetary Navigation Analysis

The Mars Science Laboratory (MSL) is a NASA rover mission that will be launched in late 2011 and will land on Mars in August of 2012. This paper describes the analyses performed to validate the navigation system for launch, interplanetary cruise, and approach. MSL will use guidance during its descent into Mars in order to minimize landing dispersions, and therefore will be able to use smaller landing zones that are closer to terrain of high scientific interest. This will require a more accurate delivery of the spacecraft to the atmospheric entry interface, and a late update of the state of the spacecraft at entry. During cruise and approach the spacecraft may perform up to six trajectory correction maneuvers (TCMs), to target to the desired landing site with the required flight path angle at entry. Approach orbit determination covariance analyses have been performed to evaluate the accuracy that can be achieved in delivering the spacecraft to the entry interface point, and to determine how accurately the state of the spacecraft can be predicted to initialize the guidance algorithm. In addition, a sensitivity analysis has been performed to evaluate which factors most contribute to the improvement or degradation of the navigation performance, for both entry flight path angle delivery and entry state knowledge.

orbit determination↗

NASA NTRS2011

Mars Science Laboratory interplanetary navigaton analysis

The Mars Science Laboratory (MSL) is a NASA rover mission that will be launched in late 2011 and will land on Mars in August of 2012. This paper describes the analyses performed to validate the navigation system for launch, interplanetary cruise, and approach. MSL will use guidance during its descent into Mars in order to minimize landing dispersions, and therefore will be able to use smaller landing zones that are closer to terrain of high scientific interest. This will require a more accurate delivery of the spacecraft to the atmospheric entry interface, and a late update of the state of the spacecraft at entry. During cruise and approach the spacecraft may perform up to six trajectory correction maneuvers (TCMs), to target to the desired landing site with the required flight path angle at entry. Approach orbit determination covariance analyses have been performed to evaluate the accuracy that can be achieved in delivering the spacecraft to the entry interface point, and to determine how accurately the state of the spacecraft can be predicted to initialize the guidance algorithm. In addition, a sensitivity analysis has been performed to evaluate which factors most contribute to the improvement or degradation of the navigation performance, for both entry flight path angle delivery and entry state knowledge.

Wong, Mau C.↗

NASA NTRS1984

Research pressure instrumentation for NASA Space Shuttle main engine

The development of prototype pressure transducers which are targeted to meet the Space Shuttle Main Engine SSME performance design goals is discussed. The fabrication, testing and delivery of 10 prototype units is examined. Silicon piezoresistive strain sensing technology is used to achieve the objectives of advanced state-of-the-art pressure sensors in terms of reliability, accuracy and ease of manufacture. Integration of multiple functions on a single chip is the key attribute of this technology.

Anderson, P. J.↗

NASA NTRS1989

The Alaska SAR processor - Operations and control

The Alaska SAR (synthetic-aperture radar) Facility (ASF) will be capable of receiving, processing, archiving, and producing a variety of SAR image products from three satellite-borne SARs: E-ERS-1 (ESA), J-ERS-1 (NASDA) and Radarsat (Canada). Crucial to the success of the ASF is the Alaska SAR processor (ASP), which will be capable of processing over 200 100-km x 100-km (Seasat-like) frames per day from the raw SAR data, at a ground resolution of about 30 m x 30 m. The processed imagery is of high geometric and radiometric accuracy, and is geolocated to within 500 m. Special-purpose hardware has been designed to execute a SAR processing algorithm to achieve this performance. This hardware is currently undergoing acceptance testing for delivery to the University of Alaska. Particular attention has been devoted to making the operations semi-automated and to providing a friendly operator interface via a computer workstation. The operations and control of the Alaska SAR processor are described.

Carande, Richard E.↗

NASA NTRS2014

Test and Recommendation of Flight-forward Resistive Temperature Detector for Resource Prospector Mission

The Resource Prospector Mission (RPM) is an in-situ resource utilization (ISRU) technology demonstration mission planned to launch in 2018. The mission will use the Regolith and Environment Science & Oxygen and Lunar Volatile Extraction (RESOLVE) Payload to prospect for lunar volatiles such as water, oxygen, and carbon dioxide. These compounds will validate ISRU capability. The payload, particularly the Lunar Advanced Volatile Analysis (LAVA) subsystem, requires numerous temperature measurements to accurately control on-board heaters that keep the volatiles in the vapor phase to allow quantification and prevent the clogging of delivery lines. Previous spaceflight missions have proven that Resistive Temperature Detector (RTD) failure impedes mission success. The research resulted in a recommendation for a flight-forward RTD. The recommendation was based on accuracy, consistency, and ease of installation of RTDs procured from IST, QTI, and Honeywell.

LAVA↗

NASA NTRS2012

Test and Recommendation of Flight-Forward Resistive Temperature Detector for Resource Prospector Mission

The Resource Prospector Mission (RPM) is an in-situ resource utilization (ISRU) technology demonstration mission planned to launch in 2018. The mission will use the Regolith and Environment Science & Oxygen and Lunar Volatile Extraction (RESOLVE) Payload to prospect for lunar volatiles such as water, oxygen, and carbon dioxide. These compounds will validate ISRU capability. The payload, particularly the Lunar Advanced Volatile Analysis (LAVA) subsystem, requires numerous temperature measurements to accurately control on-board heaters that keep the volatiles in the vapor phase to allow quantification and prevent the clogging of delivery lines. Previous spaceflight missions have proven that Resistive Temperature Detector (RTD) failure impedes mission success. The research resulted in a recommendation for a flight-forward RTD. The recommendation was based on accuracy, consistency, and ease of installation of RTDs procured from IST, QTI, and Honeywell.

LAVA↗

NASA NTRS2006

High-Capacity Communications from Martian Distances Part 4: Assessment of Spacecraft Pointing Accuracy Capabilities Required For Large Ka-Band Reflector Antennas

Improved surface accuracy for deployable reflectors has brought with it the possibility of Ka-band reflector antennas with extents on the order of 1000 wavelengths. Such antennas are being considered for high-rate data delivery from planetary distances. To maintain losses at reasonable levels requires a sufficiently capable Attitude Determination and Control System (ADCS) onboard the spacecraft. This paper provides an assessment of currently available ADCS strategies and performance levels. In addition to other issues, specific factors considered include: (1) use of "beaconless" or open loop tracking versus use of a beacon on the Earth side of the link, and (2) selection of fine pointing strategy (body-fixed/spacecraft pointing, reflector pointing or various forms of electronic beam steering). Capabilities of recent spacecraft are discussed.

Hodges, Richard E.↗

NASA NTRS2006

High-capacity communications from Martian distances part 4 : assessment of spacecraft pointing accuracy capabilities required for large Ka-band reflector antennas

Improved surface accuracy for deployable reflectors has brought with it the possibility of Ka-band reflector antennas with extents on the order of 1000 wavelengths. Such antennas are being considered for high-rate data delivery from planetary distances. To maintain losses at reasonable levels requires a sufficiently capable Attitude Determination and Control System (ADCS) onboard the spacecraft. This paper provides an assessment of currently available ADCS strategies and performance levels. In addition to other issues, specific factors considered include: (1) use of "beaconless" or open loop tracking versus use of a beacon on the Earth side of the link, and (2) selection of fine pointing strategy (body-fixed/spacecraft pointing, reflector pointing or various forms of electronic beam steering). Capabilities of recent spacecraft are discussed.

Bassily, Samir (Sam)↗

NASA NTRS1973

Design, testing, and delivery of an interactive graphics display subsystem

An interactive graphics display system was designed to be used in locating components on a printed circuit card and outputting data concerning their thermal values. The manner in which this was accomplished in terms of both hardware and software is described. An analysis of the accuracy of this approach is also included.

Holmes, B.↗

NASA NTRSDate not supplied

Implementation of a Hybrid Edge Node-Centroid Node Approach for the Generation of Reduced Thermal Models

Reduced thermal models are often required for delivery to organizations that manage models at the highest levels of assembly. The effort to generate/verify these models against their detailed counterparts is a challenge not yet conclusively solved. Higher level organizations often place a limit on the node count for delivered models, assuming smaller models result in faster computation. The burden of producing and verifying the accuracy of reduced models is primarily on the lower-level organizations, which consumes resources to produce these models. Limiting the number of allowable nodes may prevent users from taking full advantage of software capabilities that allow for faster generation of models, such as finite elements, which require more nodes than centroid based models. A methodology using Thermal Desktop was described in 2010 using: (1) finite elements and edge nodes for the conduction matrix, (2) centroid nodes for capacitance and radiative computations, and (3) the super network feature to produce a conduction matrix based only on the centroid nodes. While the methodology was clear, the implementation would have had to be done manually; with the inclusion of the OpenTD Application Programming Interface, this methodology can now be implemented programmatically and be a viable approach for the generation of reduced models. The approach was implemented at NASA-Goddard for the Capture-Containment-and-Return-System (CCRS) payload, resulting in the TCYEE tool. CCRS requires delivery with node limitations through the European Space Agency to its contractors. TCYEE generated the reduced model for delivery and the predictions compared favorably to the detailed model. Furthermore, TCYEE is being explored for potential use on the Roman Space Telescope (RST) for the generation of reduced models for delivery to the launch provider, which also has node limit requirements. This paper describes the methodology, implementation, and the performance of reduced models compared to their detailed counterparts.

Computer Programming and Software↗

NASA NTRSDate not supplied

Multi-source Estimates of Land / Ocean Moisture Transport Variability over the Satellite Era

It is widely appreciated that atmospheric transport of water from the world’s oceans is a process key to planetary energy balance as well as Earth's habitability. What is not yet clear is the extent of variability in moisture transports, the relative importance of interdecadal variability versus climate change signals, and importantly, our ability to quantify these changes. This work assesses variations in moisture transport variability during the satellite era (~1980 to present) by comparing several different estimates. (i) The most direct estimate is the vertically integrated flux convergence of moisture from reanalyses which use observed wind and moisture information. (ii) One alternative estimate comes from P-ET over land taken from global hydrologic models constrained with precipitation and near-surface meteorology. Here we use an ensemble of six models. An adjunct to this method is to employ satellite derive ET (e.g., GLEAM or DOLCE). (iii) Complementary to this is E-P over the global oceans derived from satellite estimates of P such as TRMM, GPM and GPCP and SeaFlux V3 or J-OFURO3 estimates of E, all relying heavily upon microwave measurements. Transport between land and oceans must essentially balance at monthly scales, i.e., vanish globally. (iv) a fourth perspective comes from estimate of terrestrial RO + storage rate, delta S. G-RUN Ensemble which uses observed streamflow and P measurements to calibrate a statistical model provides the former while GRACE, GRACE-FO provide total water storage anomalies used to calculate storage rate changes. GRACE REC uses GRACE data to train a precipitation-driven statistical model to extend storage estimates before the GRACE era. (All of these alternatives to reanalysis estimates also consider the small atmospheric column water vapor contribution.) We examine the transport changes from these three different methodologies, their relative accuracies and discuss the origin of their differences. Regional trends in moisture flux divergence and their role in multi-decadal trends are considered. Interannual variability arising in connection with ENSO variability is a dominant signal, driven largely by P changes. Trends since 1980 include reductions in moisture delivery to the western U.S., eastern Brazil, and central Africa with recovery of moisture convergence to the Sahel and parts of eastern North America.

Franklin Robertson↗

NASA NTRS1980

An analysis of network deployment for a dedicated navigation tracking system

Stringent navigation accuracy requirements for future deep space missions are expected to be met by conventional two way radio metric data supplemented with Very Long Baseline Interferometric (VLBI) data provided by a dedicated tracking network. The performance of several proposed VLBI network configurations have been evaluated by comparing navigation capability for the probe delivery and post flight probe trajectory phases of the Galileo mission. Candidate configurations include stations located at the current intercontinental DSN sites, a network with sites in Hawaii, Florida and Washington, Regional (300 km) and a Micro (30 km) baseline systems. Sensitivity to systematic error sources, network deployment, viewing period and sampling strategy are investigated. The dominant factor in performance is shown to be the baseline length.

Ellis, J.↗