Search NASA⌕ Search

SEARCH · Search NASA

Results for “density functional theory (DFT)”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Probing thermodynamics of radiogenic helium and defects in $δ$-plutonium alloys and interactions with adsorbed environmental gases

Differential scanning calorimetry coupled with simultaneous evolved gas analysis (DSC-EGA) on aged δ-Pu samples shows that most radiogenic helium remains trapped within the Pu matrix at temperatures very close to, or slightly above, the melting temperature. Our results indicate that helium release from 50-year-old δ-Pu occurs as a burst just below the melting temperature (>0.994 T m ), with subsequent pressure oscillations as temperature increases. Subordinate quantities of H 2 were also released along with helium. Here, the helium emission tails off and ceases above ~720 – 750°C. In a δ-Pu alloy aged 6 years, the initial helium burst occurs slightly above melting (~1.015 – 1.042 T m ), with a discrete, larger helium spike occurring between 670 and 686°C. The proximity of helium release to the liquidus transition presented challenges in the deconvolution of overlapping process enthalpies, the liquidus endotherm, and the exotherm resulting from bubble collapse, annealing and gas expulsion. Helium’s strong affinity for vacancy binding in a 2He-vac configuration is predicted by Density Functional Theory (DFT) modeling. The measured stored energy associated with the He release events in a 50-year-old δ alloy is on the order of ~ 10–11 J/g, which is significantly higher than stored energies measured in the sub-solidus regimes (~2 J/g) that are related to the solid-state annealing of processing- and radiation-induced defects. This implies that aged δ Pu alloys have a remarkable resilience to accommodate the lattice strain produced by the internal pressure of the helium bubbles and provides further insight into the thermodynamic behavior of aged δ Pu.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Nickel Enhances InPd-Catalyzed Nitrate Reduction Activity and N 2 Selectivity

Palladium–indium (PdIn) is a well-established bimetallic composition for reductively degrading nitrate anions, one of the most ubiquitous contaminants in the groundwater. However, the scarcity and the variable price of these rare-earth and platinum group critical metals may hinder their use for water treatment. Nickel (Ni), a nonprecious metal in the same element group as Pd, could partially replace and lower Pd usage if the resulting trimetallic composition is sufficiently catalytically active. Herein, we report the synthesis and nitrate reduction catalysis of activated carbon-supported “In-on-Pd-on-Ni” catalysts (InPdNi/AC). While bimetallic InPd/AC (0.05 wt % In, 1.3 wt % Pd) was expectedly active, trimetallic InPdNi/AC containing the same In amount, much less Pd (0.1 wt %), and 1 wt % Ni was >17 more active (k cat ≈ 20 vs 349 L min –1 g surface metal –1 ). X-ray photoelectron spectroscopy (XPS) and density functional theory (DFT) calculations showed that Pd gained electron density from Ni, correlating to the increased nitrate reduction activity. Ammonium byproduct selectivity for InPdNi/AC (18% at 50% nitrate conversion) was lower compared to that of InPd/AC (48%), suggestive of the higher surface coverage of NO or its greater reactivity with NO 2 – , which led to more N 2 . Accounting for the catalyst precursor, manufacturing costs, and spent metal recovery, we calculated that Ni incorporation lowered the net catalyst cost significantly (from $\$$1028/kg to $\$$170/kg). The trimetallic composition lowered, by ∼26 times, the catalyst cost of a stirred tank reactor sized to the same treatment capacity as that for the bimetallic case. In conclusion, the results demonstrate that the partial replacement of the precious metal with an earth-abundant one leads to a higher efficiency and lower cost denitrification catalyst, via a material strategy that should be beneficial for other clean-water catalytic systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Thermal properties of the metallic delafossite PdCo⁢O 2 : A combined experimental and first-principles study

Metallic delafossite materials (e.g., PdCo⁢O 2 , PtCo⁢O 2 ), have attracted much recent attention due to record-high oxide conductivities, the origins of which remain unclear. Relatively little attention has been paid to their related thermal properties, however. Here, we address this via wide temperature range experimental studies of the crystal structure, thermal expansion, and specific heat of single-crystal PdCo⁢O 2 , combined with density-functional theory (DFT) calculations of the electronic and phononic densities of states, and thus thermal properties. PdCo⁢O 2 is shown to retain the $R\bar{3}m$ space group from 12 to 1000 K, exhibiting a- and c-axis thermal expansion in good quantitative agreement with DFT-based lattice dynamics calculations. The Co-O bond lengths additionally elucidate the stability of the low-spin state of the nominally Co 3+ ions, which is a notable difference between the edge-shared Co-O octahedra in PdCo⁢O 2 and the corner-shared octahedra in Co-based perovskites. Measurements of specific heat from 1.9 to 400 K provide accurate values for the Debye temperature and Sommerfeld coefficient, the phononic part being describable via a combined Debye-Einstein approach (accounting for high-frequency oxygen-related optical phonons), with excess intermediate-temperature specific heat due to a prominent low-energy peak in the phonon density of states. Most significantly, all electronic and phononic contributions to the specific heat are shown to be remarkably closely reproduced by DFT-based calculations, establishing quantitative understanding of key thermal properties of the metallic delafossite PdCo⁢O 2 .

36 MATERIALS SCIENCE↗
DOE OSTI2022

Analysis of the Selective Flotation of Elemental Gold from Pyrite Using Diisobutyl Monothiophosphate

The gold contained in copper ores is an important resource for the gold industry. In some cases, elemental gold is present and can be recovered by selective flotation. It has been reported that the gold grade and recovery can be increased, without sacrificing the copper recovery, by replacing AERO 3477 (diisobutyl dithiophosphate (DTP)) with AERO 7249 (mixture of diisobutyl monothiophosphate (MTP) and diisobutyl dithiophosphate (DTP)) as the main collector. The fundamental understanding of the improvement in selectivity with the addition of MTP in the flotation of elemental gold from pyrite is limited and is the subject of this paper. In this regard, the hydrophobicity and selectivity of DTP and MTP in the flotation of pyrite and gold are compared and discussed. Density functional theory (DFT) was used to examine the electron density, reactivity, highest occupied molecular orbital (HOMO), and lowest unoccupied molecular orbital (LUMO) of the MTP and DTP collectors. The interaction energies for the adsorption of MTP and DTP from fresh pyrite, oxidized pyrite and gold surfaces were calculated and discussed with respect to the experimental results reported in the literature. Molecular dynamics simulation (MDS) was used to examine the adsorption state of MTP and DTP on the pyrite (100) and Au (111) surfaces.

58 GEOSCIENCES↗
DOE OSTI2025

Modeling the Behavior of Complex Aqueous Electrolytes Using Machine Learning Interatomic Potentials: The Case of Sodium Sulfate

Understanding the structure and thermodynamics of solvated ions is essential for advancing applications in electrochemistry, water treatment, and energy storage. While ab initio molecular dynamics methods are highly accurate, they are limited by short accessible time and length scales whereas classical force fields struggle with accuracy. Herein, we explore the structure and thermodynamics of complex monovalent-divalent ion pairs using Na 2 SO 4 (aq) as a case study by applying a machine learning interatomic potential (MLIP) trained on density functional theory (DFT) data. Our MLIP-based approach reproduces key bulk properties such as density and radial distribution functions of water. We provide the hydration structure of the sodium and sulfate ions in the 0.1–2 M concentration range and the one-dimensional and two-dimensional potentials of mean force for the sodium–sulfate ion pairing at the low concentration limit (0.1 M), which are inaccessible to DFT. At low concentrations, the sulfate ion is strongly solvated, leading to the stabilization of solvent-separated ion pairs over contact ion pairs. Minimum energy pathway analysis revealed that coordinating two sodium ions with a sulfate ion is a multistep process whereby the sodium ions coordinate to the sulfate ion sequentially. Finally, we demonstrate that MLIPs allow the study of solvated ions beyond simple monovalent pairs with DFT-level accuracy in their low concentration limit (0.1 M) via statistically converged properties from ns-long simulations.

anions↗
DOE OSTI2020

Improving stability of ALD ZrN thin film coatings over U-Mo dispersion fuel

Atomic layer deposition (ALD) of ZrN is a candidate technology for coating U-Mo dispersion fuel as a diffusion barrier coating. During the early development stages of the coating the ZrN deposition showed to be mechanically unstable and ultimately resulted in spalling. Based on experimental outcomes it was found that instabillity can be eliminated through the introduction of a thin amorphous (a) Al 2 O 3 interlayer coating deposited in between the ~1-μm thick ZrN and the U-Mo. substrate. To elucidate these findings simulations were performed with density functional theory (DFT) to measure work of adhesions at different interfaces while finite element modeling (FEM) was performed to measure the residual stress distribution. DFT indicated that the ZrN coating deposited over (a)-Al 2 O 3 is ~2.5 times stronger when compared to direct deposition over U or UO 2 substrate. While calculations from FEM recognized; (1) large stress concentrations can originate from the irregularly distributed native surface oxides (UO 2 ) over U-Mo and (2) stress concentrations can be reduced if those surface UO 2 can be modified to a uniform layer (achieved after application of a 8 nm (a)-Al 2 O 3 interlayer). These results provided explanations and confirmed the role played by interlayer in eliminating the original mechanical instability of the ZrN.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Revisiting point defect thermodynamics in group IVB and VB transition metal carbides

We present a comprehensive re-examination of point defect thermodynamics in group IVB and VB transition metal carbides (TMCs) with the rocksalt structure using a combination of density functional theory (DFT) calculations and a statistical mechanical Wagner-Schottky model within the canonical ensemble. The most stable configurations of point defects were discovered using basin-hopping global optimization, driven by either a machine learning interatomic potential (MLIP) or DFT. A key finding is the identification of previously unreported dicarbon antisites—a C–C dimer occupying a metal site—as the structural (constitutional) defects on the carbon-rich side of stoichiometry in all group IVB and VB TMCs except TaC. Furthermore, dicarbon antisite-containing thermal defect complexes, such as quadruple and interbranch defects, can dominate in TMCs under specific stoichiometric and temperature conditions. In conclusion, by incorporating dicarbon antisites into the defect landscape, this work provides a revised understanding of the thermodynamics of point defects in TMCs.

Carbides↗
DOE OSTI2020

Surface Amorphization of Vanadium Dioxide (B) for K-ion Battery

Given the merits of low cost, fast ionic transport in electrolyte, and high operating voltage, potassium ion batteries (PIBs) are promising alternatives to lithium-ion batteries. However, developing suitable electrode materials that can reversibly accommodate large potassium ions is a great challenge. In this paper, guided by density functional theory (DFT) calculations, it is demonstrated that the strategy of interfacial engineering via surface amorphization of VO 2 (B) nanorods (SA-VO 2 ), which results in the formation of a crystalline core/amorphous shell heterostructure, enables superior K + storage performance in terms of large capacity, outstanding rate capability, and long cycle stability working as an anode for PIBs. DFT calculations reveal that the created crystalline/amorphous heterointerface in SA-VO 2 can substantially lower the surface energy, narrow the band gap, and reduce the K + diffusion barrier of VO 2 (B). These conditions enable enhanced K + storage capacity and rapid K + /electron transfer, which result in large capacity and outstanding rate capability. Using in situ X-ray diffraction and in situ transmission electron microscopy complemented by ex situ microscopic and spectroscopic techniques, it is unveiled that the superior cycling stability originates from the excellent phase reversibility with negligible strain response and robust mechanical behavior of SA-VO 2 upon (de)potassiation.

25 ENERGY STORAGE↗
DOE OSTI2025

High-Temperature Gas Sensor Materials with Properties Predicted via First-Principles Calculations with Machine Learning Modeling and Experimental Corroboration

Understanding the temperature dependence of functional properties of sensing materials is vital for their applications in combustion environments. The electron-phonon coupling that derives the electronic structure change with temperatures is a key property of interest as it affects other sensing responses. Herein, we first assess the temperature dependence of band gap renormalization in sensing materials by employing Allen-Heine-Cardona (AHC) theory with density functional theory (DFT) simulations corroborated with experimental observation. As the AHC calculations are impractical for high-throughput screening of materials, we employ data-driven Gaussian process regression to predict the parameters employed in the O’Donnell empirical model from a set of physical features. To mitigate the reliability issues arising from the small size of the dataset, we apply a Bayesian technique to improve the generalizability of the data-driven models as well as to quantify the uncertainty associated with theoretical predictions. These models capture well the overall trend of the O’Donnell parameters with respect to a reduced feature set obtained by transforming the available physical features. Quantifying the associated uncertainty helps us understand the reliability of the predictions and, therefore, the variation of bandgap as a function of temperature for other novel materials. The predicted candidates from machine learning models are further validated by experiments and DFT calculations.

bandgap renormalization↗
DOE OSTI2025

Understanding of Ag Nanocatalysts for Electrocatalytic CO2 Conversion: Effects of Particle Size and Carbon Support

In this talk, we combined ultrahigh vacuum (UHV) surface science techniques, electrochemical measurements, and computational modeling to investigate Ag based electrocatalysts for CO2 reduction reaction (CO2RR). Our goal is to understand the critical characteristics governing the activity and selectivity of Ag electrocatalysts. Ag electrocatalysts were grown on highly oriented pyrolytic graphite (HOPG) in the UHV chamber, characterized with X-ray photoelectron spectroscopy (XPS) and scanning tunneling microscopy (STM), and then tested in a custom-built gastight H-cell. Supported by computational modeling based on density functional theory (DFT) calculations and microkinetic modeling (MKM), our studies revealed a strong size-dependent electrocatalytic CO2-to-CO conversion of the Ag nanoparticle electrocatalysts with average particle diameter between 2 to 6 nm. Smaller diameter (< 3 nm) particles favored H2 evolution reaction (HER) due to a high population of Ag edge sites, whereas larger diameter particles favored CO2RR as the population of Ag(100) surface sites grew. We further discovered that electronic interactions between small diameter Ag particles and highly defective carbon supports could break the size-dependent CO2RR reactivity, resulting in highly selective (CO Faradaic Efficiency > 90%) and active Ag nanoparticle electrocatalysts with sizes < 2 nm diameter. This knowledge is key to understand electrocatalysts performance and to ultimately guide electrocatalyst design

Ag nanoparticles↗
DOE OSTI2025

Design guidance for ferrites: Insights from density functional theory on magnetic properties

A grand challenge in materials research is identifying the relationship between composition and performance. Herein, we explore this relationship for magnetic properties, specifically magnetic saturation (M s ) and magnetocrystalline anisotropy energy (K) of ferrites. Ferrites are materials derived from magnetite (chemical formula = Fe 3 O 4 ) that comprise metallic elements such as Fe, Mn, Ni, Co, Cu and Zn. Experimentally, synthesizing and characterizing ferrites is time consuming. Further, selection of compositions to achieve particular magnetic properties currently relies on intuition. To address this, in this work, density functional theory (DFT) is used to predict M s and K for 571 ferrite structures. These structures are primarily double-substituted non-stoichiometric ferrites with formulae M1 x M2 y Fe 3–x–y O 4 , where M1 and M2 can be Mn, Ni, Co, Cu and/or Zn and 0 ≤ x ≤ 1 and y = 1–x. Calculated magnetic properties for the structures in this study vary from 0.04 × 10 5 to 9.6 × 10 5 A m −1 for M s and from 0.02 × 10 5 to 14.08 × 10 5 J m −3 for K. All structures are made publicly available in a FAIR database.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Assessing the accuracy of compound formation energies with quantum Monte Carlo

Accurately predicting the formation energy of a compound, which describes its thermodynamic stability, is a key challenge in materials physics. Here, we employ a many-body quantum Monte Carlo (QMC) with single-reference trial functions to compute the formation energy of two electronically disparate compounds, the intermetallic VPt2 and the semiconductor CuI, for which standard density functional theory (DFT) predictions using both the Perdew-Burke-Ernzerhof (PBE) and the strongly constrained and appropriately normed (SCAN) density functional approximations deviate markedly from available experimental values. For VPt2, we find an agreement between QMC, SCAN, and PBE0 estimates, which therefore remain in disagreement with the much less exothermic experimental value. For CuI, the QMC result agrees with neither SCAN nor PBE pointing towards DFT exchange-correlation biases, likely related to the localized Cu 3d electrons. Compared to the behavior of some density functional approximations within DFT, spin-averaged QMC exhibits a smaller but still appreciable deviation when compared to experiment. The QMC result is slightly improved by incorporating spin-orbit corrections for CuI and solid I 2 , so that experiment and theory are brought into imperfect but reasonable agreement within about 120 meV/atom.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Unraveling the CO Oxidation Mechanism over Highly Dispersed Pt Single Atom on Anatase TiO 2 (101)

Catalysts with noble metals deposited as single atoms on metal oxide supports have recently been studied extensively due to their maximized metal utilization and potential for performing difficult chemical conversions owing to their unique electronic properties. Understanding of the reaction mechanisms on supported single-metal atoms is still limited but is highly important for designing more efficient catalysts. In this study, we report the complexity of the CO oxidation reaction mechanism on Pt single atoms supported on anatase TiO 2 (Pt SA /a-TiO 2 ) by coupling density functional theory (DFT) calculations and microkinetic analysis with kinetic measurements, in situ/operando infrared, and X-ray absorption spectroscopies. Starting from the adsorbed Pt SA occupying an O vacancy induced by reductive pretreatment, we show that CO oxidation follows a complex mechanism consisting of initiation steps to reorganize the active site and multibranch reactive cycles, with the Pt SA /a-TiO 2 catalyst not returning to its initial configuration. The initiation step consists of CO and O 2 adsorption healing the O vacancy, followed by CO oxidation using gas-phase CO to form Pt(CO). The reactive cycle alternates O 2 adsorption and dissociation to oxidize the catalyst to Pt(O)(O)(CO) and branching pathways of competing Langmuir–Hinshelwood (LH)- or Eley–Rideal (ER)-type CO oxidation steps to reduce it again to Pt(CO). In situ/operando infrared experiments, including cryogenic CO adsorption and isotopic CO exchange, confirm the combined involvement of strongly adsorbed CO and gas-phase CO in an Eley–Rideal step along the reaction cycle. Microkinetic modeling shows that Pt single atoms are present in a mixture of Pt(CO), Pt(CO)(O 2 ), Pt(O)(CO)(O 2 ), and Pt(CO)(CO 3 ) structures as the main intermediates during steady-state CO oxidation, all having the C–O vibrational stretch close to the experimentally observed value of 2115 cm –1 . Microkinetic modeling also shows that the fractional orders of CO and O 2 measured experimentally originate from multiple steps with a high degree of rate control and not from a simple competitive adsorption. The results demonstrate the complex reaction pathways that even CO oxidation on a simple single-atom system can follow, providing mechanistic insights for designing efficient Pt-based single-atom catalysts. Here, we further show that microkinetic modeling results are sensitive to changes in energies of intermediate and transition states within errors of density functional theory, which can ultimately lead to incorrect conclusions regarding the reaction pathways and most abundant reaction intermediates if not accounted for by experiments.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Prediction of Feasibility of Polaronic OER on (110) Surface of Rutile TiO 2

The polaronic effects at the atomic level hold paramount significance for advancing the efficacy of transition metal oxides in applications pertinent to renewable energy. The lattice–distortion mediated localization of photoexcited carriers in the form of polarons plays a pivotal role in the photocatalysis. This investigation focuses on rutile TiO 2 , an important material extensively explored for solar energy conversion in artificial photosynthesis, specifically targeting the generation of green H 2 through photoelectrochemical (PEC) H 2 O splitting. By employing Hubbard-U corrected and hybrid density functional theory (DFT) methods, we systematically probe the polaronic effects in the catalysis of oxygen evolution reaction (OER) on the (110) surface of rutile TiO 2 . Theoretical understanding of polarons within the surface, coupled with simulations of OER at distinct titanium (Ti) and oxygen (O) active sites, reveals diverse polaron formation energies within the lattice sites with strong preference for bulk and surface bridge (O b ) oxygen sites. Moreover, we provide the evidence for the facilitative role of polarons in OER. Here, we find that hole polarons situated at the equatorial oxygen sites near the Ti–active site, along with bridge site hole polarons distal from the O b active site yield a small reduction in OER overpotential by ~0.06 eV and ~0.12 eV, respectively. However, subsurface, equatorial, and bridge site hole polarons significantly reduce the Ti-active site OER overpotential by ~0.4 eV through the peroxo–type oxygen pathway. We also observe that the presence of hole polarons stabilizes the *OH, *O, and *OOH intermediate species compared to the scenario without hole polarons. Overall, this study provides a detailed mechanistic insight into polaron–mediated OER, offering a promising avenue for improving the catalytic activity of transition metal oxide-based photocatalysts catering to renewable energy requisites.

14 SOLAR ENERGY↗
DOE OSTI2025

Ba 1−x Sr x FeO 3−δ as an improved oxygen storage material for chemical looping air separation: a computational and experimental study

Chemical looping air separation (CLAS) is a promising technology to generate oxygen-rich gas streams to enable efficient carbon dioxide capture during fossil fuel combustion or gasification. CLAS relies on the capture and release of oxygen from the atmosphere using the redox properties of an oxygen-selective solid oxide carrier. This study investigates the redox characteristics of Ba 1−x Sr x FeO 3−δ (0.0 ≤ x ≤ 0.417, 0.0 ≤ δ ≤ 0.5) using a combination of density functional theory (DFT) calculations and experimental verification using X-ray diffraction, thermogravimetric analysis, and oxygen-temperature-programmed desorption. The DFT computed energies of the Ba 1−x Sr x FeO 3−δ perovskites reveal a composition-dependent transition from hexagonal to cubic phases as the Sr-concentration or oxygen vacancy concentration increases. Oxygen vacancy formation energies of the cubic perovskites are found to be lower than those of their hexagonal counterparts. A low oxygen diffusion barrier of ∼1 eV combined with the thermodynamic preference of Ba 1−x Sr x FeO 3−δ compositions that form in a cubic phase suggests them as promising candidates for oxygen storage applications. The experimental results corroborate this finding by identifying Ba 0.75 Sr 0.25 FeO 3−δ in the cubic phase as an optimal composition offering low-temperature oxygen storage capacities comparable to that of the state-of-the-art Sr 0.75 Ca 0.25 FeO 3−δ perovskite oxygen storage material at 325 °C and 350 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Effect of Fluoroethylene Carbonate Additives on the Initial Formation of the Solid Electrolyte Interphase on an Oxygen-Functionalized Graphitic Anode in Lithium-Ion Batteries

The formation of a solid electrolyte interphase (SEI) at the electrode/electrolyte interface substantially affects the stability and lifetime of lithium-ion batteries (LIBs). One of the methods to improve the lifetime of LIBs is by the inclusion of additive molecules to stabilize the SEI. To understand the effect of additive molecules on the initial stage of SEI formation, in this work we compare the decomposition and oligomerization reactions of a fluoroethylene carbonate (FEC) additive on a range of oxygen-functionalized graphitic anodes to those of an ethylene carbonate (EC) organic electrolyte. A series of density functional theory (DFT) calculations augmented by ab initio molecular dynamics (AIMD) simulations reveal that EC decomposition on an oxygen-functionalized graphitic ($11\bar{2}0$) edge facet through a nucleophilic attack on an ethylene carbon site (C E ) of an EC molecule (S2 mechanism) is spontaneous during the initial charging process of LIBs. However, decomposition of EC through a nucleophilic attack on a carbonyl carbon (C C ) site (S1 mechanism) results in alkoxide species regeneration that is responsible for continual oligomerization along the graphitic surface. In contrast, FEC prefers to decompose through an S1 pathway, which does not promote alkoxide regeneration. Including FEC as an additive is thus able to suppress alkoxide regeneration and results in a smaller and thinner SEI layer that is more flexible toward lithium intercalation during the charging/discharging process. In addition, we find that the presence of different oxygen functional groups at the surface of graphite dictates the oligomerization products and the LiF formation mechanism in the SEI.

25 ENERGY STORAGE↗
DOE OSTI2026

Thermally Stable Co@C3N4 Single-Atom Catalysts for CO Oxidation: Atomic-Level Insights into Structure and Activity

Single Co atoms supported on C3N4 (Co@C3N4) have demonstrated high activity and selectivity in photocatalysis. However, the investigation of structure–function relationships and reaction mechanisms under photocatalytic conditions is very challenging due to the complex conditions of light absorption, charge transfer, and catalysis. In this study, we employed thermal CO oxidation as a prototypical probe reaction to benchmark the intrinsic catalytic performance and track the active-site evolution of Co@C3N4. Single Co atoms were identified and shown to be the catalytically active sites for CO oxidation based on control experiments and isotope-labeling experiments. The Co sites remained atomically dispersed before, during, and after the reaction with temperatures up to 400 °C, as established by in situ X-ray absorption fine structure (XAFS) combined with density functional theory (DFT), FDMNES simulations, and dynamic-time-warping (DTW)-assisted X-ray absorption near edge structure (XANES) matching. Together with theoretical calculations, the integrated analysis reveals a stable coordination environment under reaction conditions, which correlates with sustained activity, establishing Co@C3N4 single-atom catalysts as thermally stable CO oxidation catalysts. Beyond these findings, the current study provides a workflow for unambiguously assigning active sites in Co@C3N4 for thermal CO oxidation. This workflow will aid the understanding of their behavior in photocatalysis in the future, where light-driven dynamics obscure direct structure–function links. Notably, this study provides fundamental insights for the rational design of robust single-atom catalysts and a foundation for the broader application of Co@C3N4 catalysts in oxidation reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Doping Effects on the Ductility of a Lightweight Refractory High-Entropy Alloy: Grain Boundary and Bulk Lattice Aspects

Doping elements in small amounts often segregate to grain boundaries (GBs) in alloys and can significantly impact mechanical properties and performance. Refractory high-entropy alloys (RHEAs) are known for their poor ductility, especially at low temperatures. Promoting GB cohesion through segregation can be an effective approach to mitigate embrittlement. Here, in this study, first-principles density functional theory (DFT) calculations were performed to examine the effects of important interstitial dopants (O, B, C, and N) and substitutional dopants (Cr, Y, La, and Ce) on the Σ5(310) [001] tilt GB of a lightweight RHEA Nb 32.5 Ti 27.5 Mo 22.5 Ta 12.5 Hf 2.5 Zr 2.5 . The DFT calculations reveal that certain dopants, such as B, C, Cr, N, and Y, exhibit favorable GB strengthening effects by improving bonding interactions with the bulk alloy. The impact of doping on the ductility parameter of the bulk lattice, defined as the ratio of surface energy to unstable stacking fault energy for the {110} <111> slip system, was also studied; and the results show that doping reduces the intrinsic ductility of the alloy, decreasing the D-parameter from 2.90 to 2.55, depending on the specific dopant. The present findings provide a foundational understanding at atomic level of the effect of representative dopants on mechanical properties of RHEAs and can be used to guide future alloy design for improved mechanical properties.

deformation charge density↗