Search NASA⌕ Search

SEARCH · Search NASA

Results for “dependability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Time-dependent convection with non-Newtonian viscosity

A numerical model of bottom-heated, two-dimensional convection in boxes of aspect ratios 2.5 and 4.0 was used to study the differences in time-dependent convection between Newtonian and stress-dependent viscosity. The onset of time dependence due to boundary layer instability is found at approximately the same effective Rayleigh number for both rheologies. However, with increasing Rayleigh number, the temporal and spatial fluctuations in the flow field become much more pronounced with non-Newtonian rheology; also, the tendency for breakup of long cells into smaller ones is stronger. The presence of stress-dependent rheology can cause long-wavelength lateral viscosity variations up to an order of magnitude; this result could have strong implications for the interpretation of mantle viscosity from postglacial rebound.

Christensen, Ulrich R.↗
NASA NTRS1989

Time-dependent boundary-layer response in a propeller slipstream

The time-dependent behavior of a wing boundary layer immersed in a propeller slipstream has been studied experimentally in wind-tunnel tests and in flight. Hot-wire anemometer measurements were made through the boundary layer for time-dependent, ensemble-average velocity and turbulence-intensity profiles at various chord locations. The boundary layer has a coherent, time-dependent cycle of transitional behavior, varying from a laminar to a turbulent-transitional state. Local drag coefficients determined from the velocity profiles for the freewheeling propeller case in flight show that the time-dependent drag in the propeller slipstream varies from the undisturbed laminar value to a value less than that predicted for fully turbulent flow. Local drag coefficients determined from the thrusting propeller case in the wind tunnel indicate that the effects of the slipstream are to enhance the stability of the boundary layer and to reduce the drag coefficient in the laminar portion of the cycle below its undisturbed laminar value.

Howard, Richard M.↗
NASA NTRS1989

Context dependent anti-aliasing image reconstruction

Image Reconstruction has been mostly confined to context free linear processes; the traditional continuum interpretation of digital array data uses a linear interpolator with or without an enhancement filter. Here, anti-aliasing context dependent interpretation techniques are investigated for image reconstruction. Pattern classification is applied to each neighborhood to assign it a context class; a different interpolation/filter is applied to neighborhoods of differing context. It is shown how the context dependent interpolation is computed through ensemble average statistics using high resolution training imagery from which the lower resolution image array data is obtained (simulation). A quadratic least squares (LS) context-free image quality model is described from which the context dependent interpolation coefficients are derived. It is shown how ensembles of high-resolution images can be used to capture the a priori special character of different context classes. As a consequence, a priori information such as the translational invariance of edges along the edge direction, edge discontinuity, and the character of corners is captured and can be used to interpret image array data with greater spatial resolution than would be expected by the Nyquist limit. A Gibb-like artifact associated with this super-resolution is discussed. More realistic context dependent image quality models are needed and a suggestion is made for using a quality model which now is finding application in data compression.

Beaudet, Paul R.↗
NASA NTRS1990

A time-dependent dusty gas dynamic model of axisymmetric cometary jets

The present time-dependent, axisymmetric dusty gas dynamical model of inner cometary atmospheres solves the coupled and time-dependent equations of continuity, momentum, and energy for a gas-dust mixture between the surface of the nucleus and 100 km, using an axisymmetric 40 x 40 grid structure. A novel numerical method employing a second-order accurate Godunov-type scheme with dimensional splitting is used to solve the time-dependent pde system. It is established that a subsolar dust spike not predicted by previous calculations is generated by narrow axisymmetric jets, together with a jet cone whose opening angle depends on the jet length.

Korosmezey, A.↗
NASA NTRS1990

A study of the kinematic dynamo equation with time-dependent coefficients

During an active star formation epoch the interstellar medium of a galaxy is in a hyperactive state, and the average turbulent velocity is higher than in the long periods between star formation epochs. The galactic magnetic field generated by dynamo action depends strongly on the turbulent velocity, so that generation of magnetic field should vary with star formation activity. This paper is a preliminary study of the kinematic dynamo equation with time-dependent coefficients simulating the time dependence of the star formation activities. Ko and Parker argued in a simple model that the thickness of the dynamo region is the most sensitive dynamo parameter. The present work shows that the effect of inflating the galactic disk suddenly is to transform a stationary magnetic field into a growing field while keeping the profile more or less intact. Plane wave solutions for a dynamo with power-law time-dependent parameters show that the field may decay first and then grow, and vice versa, which is quite different from a constant parameter dynamo.

Ko, Chung-Ming↗
NASA NTRS1990

The longitude dependence of the dayside F region trough - A detailed model-observation comparison

The nighttime main F-region trough extends into the sunlit afternoon sector. This trough feature exhibits both a strong magnetic-activity dependence and a longitude (UT) dependence. Whalen (1987), using IGY ionosonde data, showed that both of these effects are readly extracted from f0F2 observations. This study shows that the longitude effect is the same as that contained in the Utah State University time-dependent ionospheric model. It arises from the offset of the geomagnetic axis from the geographic axis. The magnetic-activity dependency is associated with the westward convection in the afternoon sector. It is also contained in the ionospheric model via the empirical magnetospheric convection model.

Sojka, J. J.↗
NASA NTRS1991

A comparison of three time-dependent wave packet methods for calculating electron-atom elastic scattering cross sections

Three time-dependent wave packet methods for performing elastic scattering calculations from screened Coulomb potentials are compared. The three methods are the time-dependent amplitude density method (TDADM), a Cayley-transform method (CTM), and the Chebyshev propagation method of Tal-Ezer and Kosloff. Both the TDADM and the CTM are based on a time-dependent integral equation for the wave function. In the first, the time-dependent amplitude density is propagated, while in the other two, the wave function is propagated. As a numerical example, phase shifts and cross sections are calculated using a screened Coulomb, Yukawa type potential over the range 200-1000 eV. It is found that, in most cases, all three methods yield comparable accuracy and are about equally efficient computationally. However for l = 0, where the Coulomb well is not screened by the centrifugal potential, the TDADM requires smaller grid spacings to maintain accuracy.

Judson, Richard S.↗
NASA NTRS1991

Model and observation comparison of the universal time and IMF by dependence of the ionospheric polar hole

The polar ionospheric F-region often exhibits regions of marked density depletion. These depletions have been observed by a variety of polar orbiting ionospheric satellites over a full range of solar cycle, season, magnetic activity, and universal time (UT). An empirical model of these observations has recently been developed to describe the polar depletion dependence on these parameters. Specifically, the dependence has been defined as a function of F10.7 (solar), summer or winter, Kp (magnetic), and UT. Polar cap depletions have also been predicted /1, 2/ and are, hence, present in physical models of the high latitude ionosphere. Using the Utah State University Time Dependent Ionospheric Model (TDIM) the predicted polar depletion characteristics are compared with those described by the above empirical model. In addition, the TDIM is used to predict the IMF By dependence of the polar hole feature.

Sojka, J. J.↗
NASA NTRS1992

Time-dependent mapping of the magnetic field at the core-mantle boundary

We consider the problem of constructing a time-dependent map of the magnetic field at the core-mantle boundary. We use almost all the available data from the last 300 years to produce two maps, one for the period 1690-1840 and the other for 1840-1990. We represent the spatial dependency of the field using spherical harmonics, the time dependency using a cubic B-spline basis, and seek the smoothest solutions compatible with the observations. We argue that, for observations from permanent magnetic observatories, the most efficient strategy is to use the first differences of annual means; for satellite data, the most efficient strategy is simply to limit the number of data used so as to minimize any tendency to map the crustal field into the core field. The resulting model fits the observatory data better than any previous model. The resulting time-dependent field map exhibits much of the same structure in the field and its secular variation identified in earlier studies.

Bloxham, Jeremy↗
NASA NTRS1993

Broad-band linear polarization in cool stars. II - Amplitude and wavelength dependence for magnetic and scattering regions

We have developed a model to estimate the amplitude and wavelength dependence of broad-band linear polarization (BLP) from magnetic regions on cool stars. The model includes corrections both for line blends and for the partial cancellation of polarization in the vector sum over the stellar disk. Our results agree with recent calculations of BLP in the red, but show larger amplitudes and a different wavelength dependence in the blue. We find that the detailed wavelength dependence of the polarization is complex and varies with effective temperature and gravity due to changes in line blanketing. The BLP amplitudes depend strongly on field strength, blanketing, and magnetic region filling factor and geometry. We make rough estimates of the maximum BLP for stars of various spectral types and demonstrate a method for deriving a lower limit to the filling factor from the maximum observed BLP. This lower limit is related to the fractional area covered by the spatially asymmetric component of magnetic regions.

Saar, Steven H.↗
NASA NTRS1993

Photodissociation in the atmosphere of Mars - Impact of high resolution, temperature-dependent CO2 cross-section measurements

We have investigated the impact of high resolution, temperature-dependent CO2 cross-section measurements, reported by Lewis and Carver (1983), on calculations of photodissociation rate coefficients in the Martian atmosphere. We find that the adoption of 50 A intervals for the purpose of computational efficiency results in errors in the calculated values for photodissociation of CO2, H2O, and O2 which are generally not above 10 percent, but as large as 20 percent in some instances. These are acceptably small errors, especially considering the uncertainties introduced by the large temperature dependence of the CO2 cross section. The inclusion of temperature-dependent CO2 cross sections is shown to lead to a decrease in the diurnally averaged rate of CO2 photodissociation as large as 33 percent at some altitudes, and increases of as much as 950 percent and 80 percent in the photodissociation rate coefficients of H2O and O2, respectively. The actual magnitude of the changes depends on the assumptions used to model the CO2 absorption spectrum at temperatures lower than the available measurements, and at wavelengths longward of 1970 A.

Anbar, A. D.↗
NASA NTRS1993

Spectral characteristics of time-dependent orbit errors in altimeter height measurements

A mean reference surface and time-dependent orbit errors are estimated simultaneously for each exact-repeat ground track from the first two years of Geosat sea level estimates based on the Goddard Earth model (GEM)-T2 orbits. Motivated by orbit theory and empirical analysis of Geosat data, the time-dependent orbit errors are modeled as 1 cycle per revolution (cpr) sinusoids with slowly varying amplitude and phase. The method recovers the known 'bow tie effect' introduced by the existence of force model errors within the precision orbit determination (POD) procedure used to generate the GEM-T2 orbits. The bow tie pattern of 1-cpr orbit errors is characterized by small amplitudes near the middle and larger amplitudes (up to 160 cm in the 2 yr of data considered here) near the ends of each 5- to 6-day orbit arc over which the POD force model is integrated. A detailed examination of these bow tie patterns reveals the existence of daily modulations of the amplitudes of the 1-cpr sinusoid orbit errors with typical and maximum peak-to-peak ranges of about 14 cm and 30 cm, respectively. The method also identifies a daily variation in the mean orbit error with typical and maximum peak-to-peak ranges of about 6 and 30 cm, respectively, that is unrelated to the predominant 1-cpr orbit error. Application of the simultaneous solution method to the much less accurate Geosat height estimates based on the Naval Astronautics Group orbits concludes that the accuracy of POD is not important for collinear altimetric studies of time-dependent mesoscale variability (wavelengths shorter than 1000 km), as long as the time-dependent orbit errors are dominated by 1-cpr variability and a long-arc (several orbital periods) orbit error estimation scheme such as that presented here is used.

Chelton, Dudley B.↗
NASA NTRS1992

Designing for time-dependent material response in spacecraft structures

To study the influence on overall deformations of the time-dependent constitutive properties of fiber-reinforced polymeric matrix composite materials being considered for use in orbiting precision segmented reflectors, simple sandwich beam models are developed. The beam models include layers representing the face sheets, the core, and the adhesive bonding of the face sheets to the core. A three-layer model lumps the adhesive layers with the face sheets or core, while a five-layer model considers the adhesive layers explicitly. The deformation response of the three-layer and five-layer sandwich beam models to a midspan point load is studied. This elementary loading leads to a simple analysis, and it is easy to create this loading in the laboratory. Using the correspondence principle of viscoelasticity, the models representing the elastic behavior of the two beams are transformed into time-dependent models. Representative cases of time-dependent material behavior for the facesheet material, the core material, and the adhesive are used to evaluate the influence of these constituents being time-dependent on the deformations of the beam. As an example of the results presented, if it assumed that, as a worst case, the polymer-dominated shear properties of the core behave as a Maxwell fluid such that under constant shear stress the shear strain increases by a factor of 10 in 20 years, then it is shown that the beam deflection increases by a factor of 1.4 during that time. In addition to quantitative conclusions, several assumptions are discussed which simplify the analyses for use with more complicated material models. Finally, it is shown that the simpler three-layer model suffices in many situations.

Hyer, M. W.↗
NASA NTRS1995

Optical Correlation of Images With Signal-Dependent Noise Using Constrained-Modulation Filter Devices

Images with signal-dependent noise present challenges beyond those of images with additive white or colored signal-independent noise in terms of designing the optimal 4-f correlation filter that maximizes correlation-peak signal-to-noise ratio, or combinations of correlation-peak metrics. Determining the proper design becomes more difficult when the filter is to be implemented on a constrained-modulation spatial light modulator device. The design issues involved for updatable optical filters for images with signal-dependent film-grain noise and speckle noise are examined. It is shown that although design of the optimal linear filter in the Fourier domain is impossible for images with signal-dependent noise, proper nonlinear preprocessing of the images allows the application of previously developed design rules for optimal filters to be implemented on constrained-modulation devices. Thus the nonlinear preprocessing becomes necessary for correlation in optical systems with current spatial light modulator technology. These results are illustrated with computer simulations of images with signal-dependent noise correlated with binary-phase-only filters and ternary-phase-amplitude filters.

Downie, John D.↗
NASA NTRS1995

Time-Dependent Photodissociation Regions

We present theoretical models of the time-dependent thermal and chemical structure of molecular gas suddenly exposed to far-ultraviolet (FUV) (6 eV less than hv less than 13.6 eV) radiation fields and the consequent time- dependent infrared emission of the gas. We focus on the response of molecular hydrogen for cloud densities ranging from n = 10(exp 3) to 10(exp 6)/cu cm and FUV fluxes G(sub 0) = 10(exp 3)-10(exp 6) times the local FUV interstellar flux. For G(sub 0)/n greater than 10(exp -2) cu cm, the emergent H(sub 2) vibrational line intensities are initially larger than the final equilibrium values. The H(sub 2) lines are excited by FUV fluorescence and by collisional excitation in warm gas. Most of the H(sub 2) intensity is generated at a characteristic hydrogen column density of N approximately 10(exp 21)/sq cm, which corresponds to an FUV optical depth of unity caused by dust opacity. The time dependence of the H(sub 2) intensities arises because the initial abundances of H(sub 2) at these depths is much higher than the equilibrium values, so that H(sub 2) initially competes more effectively with dust in absorbing FUV photons. Considerable column densities of warm (T approximately 1000) K H(sub 2) gas can be produced by the FUV pumping of H(sub 2) vibrational levels followed by collisional de-excitation, which transfers the energy to heat. In dense (n greater than or approximately 10(exp 5)/cu cm) gas exposed to high (G(sub 0) greater than or approximately 10(exp 4)) fluxes, this warm gas produces a 2-1 S(1)/1-0 S(l) H(sub 2) line ratio of approximately 0.1, which mimics the ratio found in shocked gas. In lower density regions, the FUV pumping produces a pure-fluorescent ratio of approximately 0.5. We also present calculations of the time dependence of the atomic hydrogen column densities and of the intensities of 0 I 6300 A, S II 6730 A, Fe II 1.64 microns, and rotational OH and H20 emission. Potential applications include star-forming regions, clouds near active galactic nuclei, and planetary nebulae. We apply our models to five planetary nebulae and conclude that only BD +30deg3639 shows evidence of enhanced H(sub 2) emission due to (high) nonequilibrium H(sub 2) abundances.

Hollenbach, David↗
NASA NTRS2001

State-Dependent Pseudo-Linear Filter for Spacecraft Attitude and Rate Estimation

This paper presents the development and performance of a special algorithm for estimating the attitude and angular rate of a spacecraft. The algorithm is a pseudo-linear Kalman filter, which is an ordinary linear Kalman filter that operates on a linear model whose matrices are current state estimate dependent. The nonlinear rotational dynamics equation of the spacecraft is presented in the state space as a state-dependent linear system. Two types of measurements are considered. One type is a measurement of the quaternion of rotation, which is obtained from a newly introduced star tracker based apparatus. The other type of measurement is that of vectors, which permits the use of a variety of vector measuring sensors like sun sensors and magnetometers. While quaternion measurements are related linearly to the state vector, vector measurements constitute a nonlinear function of the state vector. Therefore, in this paper, a state-dependent linear measurement equation is developed for the vector measurement case. The state-dependent pseudo linear filter is applied to simulated spacecraft rotations and adequate estimates of the spacecraft attitude and rate are obtained for the case of quaternion measurements as well as of vector measurements.

Bar-Itzhack, Itzhack Y.↗
NASA NTRS2003

A Study of Time-dependent and Anisotropic Effects on the Deformation Response of Two Flywheel Designs

The influence of material time dependency and anisotropy in the context of two specific flywheel designs-preload and multi-directional composite (MDC)--is investigated. In particular, we focus on the following aspects: 1) geometric constraints, 2) material constraints, 3) loading type, and 4) the fundamental character of the time-dependent response, i.e., reversible or irreversible. The bulk of the results presented were obtained using a composite (PMC IM7/8552 at 135 C) material system. The material was characterized using a general multimechanism hereditary (viscoelastoplastic) model. As a general conclusion, the results have clearly shown that both the preload and the MDC rotor designs are significantly affected by time-dependent material behavior, which may impact the state of rotor balance and potentially reduce its operating life. In view of the results of the parametric studies and predictions made in the present study, the need for actual experimentation focusing on the time-dependent behavior of full-scale flywheel rotors is self-evident.

Saleeb, Atef F.↗
NASA NTRS2002

Ca2+-dependent dephosphorylation of kinesin heavy chain on beta-granules in pancreatic beta-cells. Implications for regulated beta-granule transport and insulin exocytosis

The specific biochemical steps required for glucose-regulated insulin exocytosis from beta-cells are not well defined. Elevation of glucose leads to increases in cytosolic [Ca2+]i and biphasic release of insulin from both a readily releasable and a storage pool of beta-granules. The effect of elevated [Ca2+]i on phosphorylation of isolated beta-granule membrane proteins was evaluated, and the phosphorylation of four proteins was found to be altered by [Ca2+]i. One (a 18/20-kDa doublet) was a Ca2+-dependent increase in phosphorylation, and, surprisingly, three others (138, 42, and 36 kDa) were Ca2+-dependent dephosphorylations. The 138-kDa beta-granule phosphoprotein was found to be kinesin heavy chain (KHC). At low levels of [Ca2+]i KHC was phosphorylated by casein kinase 2, but KHC was rapidly dephosphorylated by protein phosphatase 2B beta (PP2Bbeta) as [Ca2+]i increased. Inhibitors of PP2B specifically reduced the second, microtubule-dependent, phase of insulin secretion, suggesting that dephosphorylation of KHC was required for transport of beta-granules from the storage pool to replenish the readily releasable pool of beta-granules. This is distinct from synaptic vesicle exocytosis, because neurotransmitter release from synaptosomes did not require a Ca2+-dependent KHC dephosphorylation. These results suggest a novel mechanism for regulating KHC function and beta-granule transport in beta-cells that is mediated by casein kinase 2 and PP2B. They also implicate a novel regulatory role for PP2B/calcineurin in the control of insulin secretion downstream of a rise in [Ca2+]i.

NASA Discipline Neuroscience↗