Search NASA⌕ Search

SEARCH · Search NASA

Results for “discharging method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Applications of remote sensing to stream discharge predictions

A feasibility study has been initiated on the use of remote earth observations for augmenting stream discharge prediction for the design and/or operation of major reservoir systems, pumping systems and irrigation systems. The near-term objectives are the interpolation of sparsely instrumented precipitation surveillance networks and the direct measurement of water loss by evaporation. The first steps of the study covered a survey of existing reservoir systems, stream discharge prediction methods, gage networks and the development of a self-adaptive variation of the Kentucky Watershed model, SNOPSET, that includes snowmelt. As a result of these studies, a special three channel scanner is being built for a small aircraft, which should provide snow, temperature and water vapor maps for the spatial and temporal interpolation of stream gages.

Krause, F. R.↗

Compact reconditioner for Ni/Cd cells

Extension of life of multiple-cell nickel-cadium battery packs is accomplished by reconditioning method requiring discharge of each battery cell. Compact and lightweight dc-to-dc converter replaces relay-sensor system, protecting against voltage-reversal damage, and monitors overall cell condition.

Kapustka, R. E.↗

Real time charge efficiency monitoring for nickel electrodes in NICD and NIH2 cells

The charge efficiency of nickel-cadmium and nickel-hydrogen battery cells is critical in spacecraft applications for determining the amount of time required for a battery to reach a full state of charge. As the nickel-cadmium or nickel-hydrogen batteries approach about 90 percent state of charge, the charge efficiency begins to drop towards zero, making estimation of the total amount of stored charge uncertain. Charge efficiency estimates are typically based on prior history of available capacity following standardized conditions for charge and discharge. These methods work well as long as performance does not change significantly. A relatively simple method for determining charge efficiencies during real time operation for these battery cells would be a tremendous advantage. Such a method was explored and appears to be quite well suited for application to nickel-cadmium and nickel-hydrogen battery cells. The charge efficiency is monitored in real time, using only voltage measurements as inputs. With further evaluation such a method may provide a means to better manage charge control of batteries, particularly in systems where a high degree of autonomy or system intelligence is required.

Zimmerman, A. H.↗

Determination of electron temperature in a penning discharge by the helium line ratio method

The helium line ratio technique was used to determine electron temperatures in a toroidal steady-state Penning discharge operating in helium. Due to the low background pressure, less than .0001 torr, and the low electron density, the corona model is expected to provide a good description of the excitation processes in this discharge. In addition, by varying the Penning discharge anode voltage and background pressure, it is possible to vary the electron temperature as measured by the line ratio technique over a wide range (10 to 100+ eV). These discharge characteristics allow a detailed comparison of electron temperatures measured from different possible line ratios over a wide range of temperatures and under reproducible steady-state conditions. Good agreement is found between temperatures determined from different neutral line ratios, but use of the helium ion line results in a temperature systematically 10 eV high compared to that from the neutral lines.

Richardson, R. W.↗

Thermoplastic Joining and Assembly of Bulk Metallic Glass Composites Through Capacitive Discharge

Systems and methods for joining BMG Composites are disclosed. Specifically, the joining of BMG Composites is implemented so as to preserve the amorphicity of their matrix phase and the microstructure of their particulate phase. Implementation of the joining method with respect to the construction of modular cellular structures that comprise BMG Composites is also discussed.

Hofmann, Douglas C.↗

Miniaturized pulsed discharge ionization detector, non-radioactive ionization sources, and methods thereof

The present application relates to pulsed discharge ionization detectors (PDIDs) and non-radioactive ionization sources, including miniaturized forms thereof. In some examples, the PDID includes annular electrodes, where each electrode is disposed between annular insulators. Also provided herein are methods of making and using such PDIDs, such as for detecting one or more volatile organic compounds, as well as non-radioactive ionization sources.

47 OTHER INSTRUMENTATION↗

Miniaturized pulsed discharge ionization detector, non-radioactive ionization sources, and methods thereof

The present application relates to pulsed discharge ionization detectors (PDIDs) and non-radioactive ionization sources, including miniaturized forms thereof. In some examples, the PDID includes annular electrodes, where each electrode is disposed between annular insulators. Also provided herein are methods of making and using such PDIDs, such as for detecting one or more volatile organic compounds, as well as non-radioactive ionization sources.

42 ENGINEERING↗

Determination of electron temperature in a Penning discharge by the helium line ratio method

The helium spectral line intensity ratio technique utilizes the difference in electron energy dependences of the ground state electron impact excitation cross sections of the singlet and triplet series of neutral helium and the excited states of helium ions to determine the electron temperatures in a toroidal steady-state Penning discharge operating in helium. By varying the Penning discharge anode voltage and background pressure over a range of 2.5 to 28 kV and 0.00005 to 0.0001 torr, respectively, it was possible to make a comparison of the electron temperature as measured from various possible line ratios over a wide range of temperatures (10 to 100+ eV) under reproducible steady-state conditions.

Richardson, R. W.↗

Autonomous Method and System for Minimizing the Magnitude of Plasma Discharge Current Oscillations in a Hall Effect Plasma Device

An autonomous method for minimizing the magnitude of plasma discharge current oscillations in a Hall effect plasma device includes iteratively measuring plasma discharge current oscillations of the plasma device and iteratively adjusting the magnet current delivered to the plasma device in response to measured plasma discharge current oscillations to reduce the magnitude of the plasma discharge current oscillations.

Hruby, Vladimir↗

Model of an ion flow and a method for calculating the erosion of discharge-chamber walls in a stationary plasma thruster

Morozov’s stationary plasma thrusters (SPTs) are used effectively in motion-control systems of Russian and foreign spacecraft, and the field of their application is still expanding. For this reason, the demands placed in the output parameters and lifetime of such thrusters are becoming more stringent. When solving the problems of increasing the service lifetime of SPTs, methods for predicting the erosion of discharge-chamber walls–a process that limits the lifetime of a thruster—are useful. We developed one such method earlier, which has been efficiently used in the development of modern SPTs. This letter presents an additional physical grounding and further development of the main ideas of this method on the basis of results obtained in recent years. This grounding makes it possible to expand the range of applicability of the method.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Boron trifluoride coatings for thermoplastic materials and method of applying same in glow discharge

Plastic surfaces can be improved physically and optically by treating them with a plasma of boron trifluoride. The trifluoride can be the sole reactant or be part of a mixture also containing an organic monomeric substance such as perfluorobutene-2 or an organosilane. The boron trifluoride-containing coating can also serve as an intermediate coating between the plastic surface and a plasma deposited organic polymer.

Kubacki, R. M.↗

Cathode fall measurement in a dielectric barrier discharge in helium

A method based on the “zero-length voltage” extrapolation is proposed to measure cathode fall in a dielectric barrier discharge. Starting, stable, and discharge-maintaining voltages were measured to obtain the extrapolation zero-length voltage. Under our experimental conditions, the “zero-length voltage” gave a cathode fall of about 185 V. Based on the known thickness of the cathode fall region, the spatial distribution of the electric field strength in dielectric barrier discharge in atmospheric helium is determined. The strong cathode fall with a maximum field value of approximately 9.25 kV/cm was typical for the glow mode of the discharge.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Power spectrum of electrical discharges seen on earth and at Saturn

A technique is described for deriving the radio spectrum of electrical discharges by using the properties of the time series of charges crossing the discharge gap. The method was applied to the spectrum of lightning and to the Saturn's electrical discharges (SEDs). It is shown that the occurrence and the power density of SEDs have subtle, but important, differences from these observables described in the last five years. The reasons for these differences are discussed.

Warwick, James W.↗

Device for generation of pulsed corona discharge

The invention is a method and system for the generation of high voltage, pulsed, periodic corona discharges capable of being used in the presence of conductive liquid droplets. The method and system can be used, for example, in different devices for cleaning of gaseous or liquid media using pulsed corona discharge. Specially designed electrodes and an inductor increase the efficiency of the system, permit the plasma chemical oxidation of detrimental impurities, and increase the range of stable discharge operations in the presence of droplets of water or other conductive liquids in the discharge chamber.

47 OTHER INSTRUMENTATION↗

Effects of breach formation parameter uncertainty on inundation risk area and consequence analysis

According to the national inventory of dams (NID), there are approximately 79,500 dams in the United States, with 11,800 of these dams being classified as high-hazard. It has been recommended that each high-hazard dam in the United States have an emergency action plan (EAP), but it has been found that only about 60% of the high-hazard dams have a complete EAP. A major aspect of these plans is inundation risk area identification and associated impacts in the event of dam failure. In order to determine the inundation risk area an estimation of breach discharge must be completed. Most methods used to determine breach discharge, including the NWS-DAMBRK model, require modelers to select size, shape, and time of breach formation. Federal agencies (e.g. Bureau of Reclamation, Federal Energy Regulatory Commission) with oversight of U.S. dams have recommended ranges of values for each of these parameters based on dam type. However, variations in these parameters even within the recommended range have the potential to impose significant transformation on the discharge hydrograph relative to both timing and magnitude of the peak discharge. Therefore, it has also been recommended that sensitivity of these parameters be investigated when performing breach inundation analyses. This paper presents a sensitivity analysis of three breach parameters (average breach width, side slope, and time to failure) on a case study dam located in the United States. The sensitivity analysis employed was based on the 3{sup 3} factorial design, in which three levels (e.g. low, medium, and high) were selected for each of the three parameters, resulting in twenty-seven combinations. The three levels remained within the recommended range of values for each parameter type. With each combination of input parameters, a discharge hydrograph was generated and used as a source condition for inundation analysis using a two-dimensional shallow water equation model. The resulting simulations were compared to determine the sensitivity of flood inundation area, flood arrival time, peak flood depths, and socio-economic impacts (e.g. population at risk, direct and indirect economic loss) to changes in individual parameters and parameter interactions. Results and discussion from this sensitivity analysis will be presented in detail in the paper.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Apparatus for atmospheric pressure pin-to-hole spark discharge and uses thereof

Disclosed herein are atmospheric pressure pin-to-hole pulsed spark discharge devices and methods for creating plasma. The devices include a conduit for fluidically communicating a gas, a plasma, or both, therethrough, portion of the conduit capable of being connected to a gas supply, and a second portion of the conduit capable of emitting a plasma; a positive electrode comprising a sharp tip; and a ground plate electrode. Disclosed are methods for treating a skin ulcer using non-thermal plasma include flowing a gas through a cold spark discharge zone simultaneously with the creation of a pulsed spark discharge to give rise to a non-thermal plasma emitted from a conduit, the non-thermal plasma comprising NO; and contacting a skin ulcer with said non-thermal plasma for sufficient time and intensity to give rise to treatment of the skin ulcer.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗