Search NASA⌕ Search

SEARCH · Search NASA

Results for “dissociation reaction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1963

Tabulated Values of Bond Dissociation Energies, Ionization Potentials, and Electron Affinities for Some Molecules Found in High-Temperature Chemical Reactions

Values of the bond dissociation energies, ionization potentials, and electron affinities that were taken from the literature are presented in tables for some monatomic, diatomic, and polyatomic molecules which are found in many high-temperature chemical reactions including combustion reactions. Much of the information came from literature published after 1950 which either reported experimental and theoretical energy values or gave a review of previous literature on the subject. In some cases values for the bond dissociation energies were calculated from recently published heats of formation.

IONIZATION POTENTIAL↗
NASA NTRS2017

On the Development of a New Nonequilibrium Chemistry Model for Mars Entry

This paper represents a summary of results to date of an on-going effort at NASA Ames Research Center to develop a physics-based non-equilibrium model for hypersonic entry into the Martian atmosphere. Our approach is to first compute potential energy surfaces based on accurate solutions of the electronic Schroedinger equation and then use quasiclassical trajectory calculations to obtain reaction cross sections and rate coefficients based on these potentials. We have presented new rate coefficients for N2 dissociation and CO dissociation and exchange reactions. These results illustrate shortcomings with some of the rate coefficients in Parks original T-Tv model for Mars entries and with some of the 30-45 year old shock tube data. We observe that the shock tube experiments of CO + O dissociation did not adequately account for the exchange reaction that leads to formation of C + O2. This reaction is actually the primary channel for CO removal in the shock layer at temperatures below 10,000 K, because the reaction enthalpy for exchange is considerably lower than the comparable value for dissociation.

quasiclassical trajectory calculation↗
DOE OSTI2020

Benchmarking an Embedded Adaptive Sampling Configuration Interaction Method for Surface Reactions: H 2 Desorption from and CH 4 Dissociation on Cu(111)

Embedded (emb-) correlated wavefunction (CW) theory enables accurate assessments of both ground- and excited-state reaction mechanisms involved in heterogeneous catalysis. Embedded multireference second-order perturbation theory (emb-MRPT2) based on reference wavefunctions generated via embedded complete active space self-consistent field (emb-CASSCF) theory is currently state-of-the-art. However, the factorial scaling of CASSCF limits the size of active space and the complexity of systems that can be studied. In this work, we assess the efficacy of an alternative CW method, adaptive sampling configuration interaction (ASCI)–which enables large active spaces to be used–for studying surface reactions. We couple ASCI with density functional embedding theory (DFET) and benchmark its performance for two reactions: H 2 desorption from and CH 4 dissociation on the Cu(111) surface. Unlike embedded complete active space second-order perturbation theory (emb-CASPT2) that accurately reproduces a measured H 2 desorption barrier, embedded ASCI, using a very large active space (though one that still comprises a small portion of the full set of orbitals) fails to do so. Adding an extra correlation term from embedded Møller–Plesset second-order perturbation theory (emb-MP2) improves the desorption barrier and endothermicity predictions. Thus, the inaccuracy of embedded ASCI comes from the missing dynamic correlation from the many other electrons and orbitals not included in the active space. For CH 4 dissociation, again embedded ASCI overestimates the dissociation barrier compared to emb-CASPT2 predictions. Adding dynamic correlation from emb-MP2 helps correct the barrier. However, this composite approach suffers from double counting of correlation within embedded ASCI followed by emb-MP2 calculations. We therefore conclude that the state-of-the-art emb-MRPT2 based on reference wavefunctions generated via emb-CASSCF remains the method of choice for studying surface reactions. emb-ASCI is useful when large active spaces beyond the limit of emb-CASSCF are essential, such as to study complex surface reactions with significant multiconfigurational character (static correlation) but weak dynamic correlation.

08 HYDROGEN↗
NASA NTRS2023

Effect of the Electrostatic Field due to the Surface Monolayer Metal Atoms on the Dissociation of Homonuclear Diatomic Gases in Gas-Metal Surface Reactions

The present paper examines the role of an electrostatic field generated by the outermost monolayer of metal ions prior to gas adsorption in aiding the dissociation of homonuclear diatomic gas molecules. The interaction of five homonuclear diatomic gases, Cl 2 , F 2 , H 2 , N 2 and O 2 , with several pure metals are examined using Coulomb’s law to calculate the attractive and repulsive forces between the electrons or ions in the gas molecule and the free surface metallic electrons or ions assuming a Bohr model. These calculations demonstrate that the total energy of the electrostatic fields from the metals can exceed the molecular binding energies of Cl 2 , F 2 , and O 2 at some distance from the metallic surface thereby suggesting that these gases interact primarily with the metallic surface in their atomic states after molecular bond dissociation prior to reaction. In contrast, H 2 and N 2 gases do not dissociate prior to reaching the metal surface due to the fact that the effective charge of the gas ions is less than the total electron charge at the outermost electronic shell. The present results correlate linearly with the electrochemical series standard reduction potential as well as with the Pauling electronegativity for several metals.

Gas-metal reactions↗
DOE OSTI2021

Rhodium Single–Atom Catalysts on Titania for Reverse Water Gas Shift Reaction Explored by First Principles Mechanistic Analysis and Compared to Nanoclusters

The thermocatalytic reduction of CO2 by H2 often proceeds via two competing reaction mechanisms—the reverse water gas shift reaction (rWGSR, CO2 + H2 ⇌ CO + H2O) and methanation (CO2 + 4H2 ⇌ CH4 + 2H2O). Atomically dispersed Rh1 catalysts on TiO2 show high selectivity toward the rWGSR compared with larger Rh nanoclusters, but the origin of this size-dependent selectivity has not been fully explained. Here we report density functional theory (DFT) calculations and microkinetic simulations that clarify the Rh1 active sites and rWGSR pathway on anatase TiO2(101), as well as the high rWGSR selectivity of Rh1 compared with supported Rhx (x = 2–8 atoms) nanoclusters. DFT-computed formation energies, vibrational frequency analysis, and microkinetic modeling suggest three plausible active sites: Rh1 on titania (Rh1/TiO2(101)), Rh1 with a nearby hydroxyl group (Rh1OH/TiO2(101)), and Rh1 near an oxygen vacancy at a three-fold coordinated site (Rh1 near O3cvac). Predicted turnover frequencies and apparent activation barriers for Rh1 indicate a faster reaction involving CO2 dissociation assisted by a support oxygen vacancy via Rh1 near O3cvac, as well as slower reactions involving Rh1OH/TiO2(101) or Rh1/TiO2(101) through a COOH intermediate. Furthermore, these Rh1 sites are selective toward CO rather than CH4 because of the weak adsorption of CO, large barrier for C-O bond dissociation, and the lack of nearby metal sites for H2 dissociation, in contrast to Rhx nanoclusters, including Rh2 dimers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Atomically Local Electric Field Induced Interface Water Reorientation for Alkaline Hydrogen Evolution Reaction

The slow water dissociation process in alkaline electrolyte severely limits the kinetics of HER. The orientation of H 2 O is well known to affect the dissociation process, but H 2 O orientation is hard to control because of its random distribution. Herein, an atomically asymmetric local electric field was designed by IrRu dizygotic single-atom sites (IrRu DSACs) to tune the H 2 O adsorption configuration and orientation, thus optimizing its dissociation process. The electric field intensity of IrRu DSACs is over 4.00×10 10 N/C. The ab initio molecular dynamics simulations combined with in situ Raman spectroscopy analysis on the adsorption behavior of H 2 O show that the M–H bond length (M=active site) is shortened at the interface due to the strong local electric field gradient and the optimized water orientation promotes the dissociation process of interfacial water. This work provides a new way to explore the role of single atomic sites in alkaline hydrogen evolution reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1990

Assessment of chemical nonequilibrium in rarefied hypersonic flow

Calculations are presented of chemical nonequilibrium in the rarefied hypersonic flowfields surrounding reentering spacecraft in the upper atmosphere. The direct simulation Monte Carlo method is the solution technique employed. Methods by which chemical reactions are included in this simulation scheme are focused upon. In particular, the coupling of vibrational and dissociative nonequilibrium is investigated. The assumption of a fully excited mode has very little effect on the calculated results when the vibrational mode does not contribute to the energy available for reaction. A steric factor for dissociative reactions is developed which includes the vibrational energy of the dissociating molecule. Calculations are presented for the flow along the stagnation streamline of a blunt body for conditions representative of the entry and exit phases of the Aeroassisted Flight Experiment vehicle at an altitude of 90 km. It is found that both the flow properties and surface quantities are significantly affected by the introduction of the steric factor.

Boyd, Iain D.↗
DOE OSTI2026

Third-body stabilization of supercritical CO 2 in CO oxidation: development and application of a ReaxFF force field for the CO/O/CO 2 system

Supercritical CO 2 (scCO 2 ) plays a crucial role as a solvent in separation processes, advanced power cycles, and materials processing. Nonetheless, the atomistic comprehension of how the dense scCO 2 matrix influences the fundamental reaction of carbon monoxide (CO) is still insufficiently explored. Experimental studies and molecular dynamics (MD) simulations frequently fail to detect the highly reactive, transient intermediates, such as atomic oxygen (O), that drive these reactions. Here, to address this issue, we have developed a novel ReaxFF reactive force field for the CO 2 /CO/O system. The force field parameters were calibrated using density functional theory and second-order Møller-Plesset calculations to model CO 2 crystal properties, intermolecular interactions, bond dissociation curves, and reaction energy barriers. The force field reproduces the cohesive energy of the CO 2 crystal, the pressure characteristics of bulk scCO 2 , the equation-of-state behavior over a wide pressure–density range, the pressure dependence of the C–O bond length under compression, and the structural properties of liquid and scCO 2 , as documented by experiments, ab-initio MD, and prominent non-reactive models. The force field was subsequently applied to study the CO + O → CO 2 reaction. In a dilute environment, the reaction is inefficient as the newly formed CO 2 rapidly dissociates due to excess kinetic and potential energy acquired from the exothermic reaction. Conversely, in a dense scCO 2 environment, the surrounding matrix acts as an efficient third body, stabilizing the emerging CO2 product via molecular collisions. Statistical analysis confirms an average excess energy dissipation of 133.9 ± 3.6 kcal/mol over 112.4 ± 17.9 ps. Kinetic energy decomposition reveals that ∼ 92% of the excess kinetic energy is stored in internal (rotational and vibrational) degrees of freedom. This ReaxFF force field establishes a mechanistic foundation for third-body stabilization in dense reactive environments.

Chowdhury, Emdadul Haque [Pennsylvania State Univ.↗
NASA NTRS1983

Rate processes in gas phase

Reaction-rate theory and experiment are given a critical review from the engineers' point of view. Rates of heavy-particle, collision-induced reaction in gas phase are formulated in terms of the cross sections and activation energies for reaction. The effect of cross section function shape and of excited state contributions to reaction both cause the slope of Arrhenius plots to differ from the true activation energy, except at low temperature. The master equations for chemically reacting gases are introduced, and dissociation and ionization reactions are shown to proceed primarily from excited states about kT from the dissociation or ionization limit. Collision-induced vibration, vibration-rotation, and pure rotation transitions are treated, including three-dimensional effects and conservation of energy, which have usually been ignored. The quantum theory of transitions at potential surface crossing is derived, and results are found to be in fair agreement with experiment in spite of some questionable approximations involved.

Hansen, C. F.↗
DOE OSTI2022

Nonadiabatic dissociation of molecular Bose-Einstein condensates: Competition between chemical reactions

Here, we provide a framework to solve generic models describing the dissociation of multiple molecular Bose Einstein condensates in a nonadiabatic regime. The competition between individual chemical reactions can lead to non-trivial dependence on critical components such as path interference and symmetries, thus, affecting the final distribution of atomic population. We find an analytical solution for an illustrative example model involving four atomic modes. When the system parameters satisfy CPT symmetry, where C is charge conjugation, P is parity, and T is time-reversal symmetry, our solution predicts a population imbalance between atomic modes that is exponentially sensitive to system parameters. However, a weakly broken symmetry alters the population in each atomic mode and can reverse the population imbalance. Our solution also demonstrates a strong quantum correlation between atomic modes that leads to the spontaneous production of atoms in a multi-mode squeezed state. Moreover, in our framework, a time-dependent non-Hermitian quantum mechanics naturally manifests which can alternatively be realized experimentally in photonic systems.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2024

First-Principles Insights into the Thermodynamics of Variable-Temperature Ammonia Synthesis on Transition-Metal-Doped Cu (100) and (111)

Ammonia (NH 3 ) is one of the most produced chemicals worldwide. NH 3 synthesis predominantly utilizes the Haber–Bosch (HB) process, requiring high temperatures and pressures. Despite significant process advances, ample opportunity remains for improving the rate, selectivity, catalyst stability, and energy efficiency. Inspired by a recently developed programmable heating and quenching (PHQ) technique, we present in this paper a first-principles screening of candidate single-atom alloy catalysts generated from doping (111) and (100) surfaces of copper (Cu), an ineffective HB catalyst in its pure form. We predict the thermodynamics of two rate-limiting reactions, N 2 dissociative adsorption and the final hydrogenation step leading up to NH 3 release, at 400 and 900 K. Thermodynamically, the former reaction is favored at low temperatures, while the latter is favored at high temperatures. Vanadium-, chromium-, and molybdenum-doped Cu surfaces, due to intermediate M–N covalent bonding character, emerge as appealing candidate catalysts for PHQ NH 3 synthesis, as they balance the thermodynamics of the above-mentioned reaction steps at their respective optimal temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Distinguishing homolytic vs heterolytic bond dissociation of phenylsulfonium cations with localized active space methods

Modeling chemical reactions with quantum chemical methods is challenging when the electronic structure varies significantly throughout the reaction and when electronic excited states are involved. Multireference methods, such as complete active space self-consistent field (CASSCF), can handle these multiconfigurational situations. However, even if the size of the needed active space is affordable, in many cases, the active space does not change consistently from reactant to product, causing discontinuities in the potential energy surface. The localized active space SCF (LASSCF) is a cheaper alternative to CASSCF for strongly correlated systems with weakly correlated fragments. The method is used for the first time to study a chemical reaction, namely the bond dissociation of a mono-, di-, and triphenylsulfonium cation. LASSCF calculations generate smooth potential energy scans more easily than the corresponding, more computationally expensive CASSCF calculations while predicting similar bond dissociation energies. Furthermore, our calculations suggest a homolytic bond cleavage for di- and triphenylsulfonium and a heterolytic pathway for monophenylsulfonium.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Bond dissociation energies of low-valent lanthanide hydroxides: lower limits from ion–molecule reactions and comparisons with fluorides

Despite that bond dissociation energies (BDEs) are among the most fundamental and relevant chemical properties they remain poorly characterized for most elementary lanthanide hydroxides and halides. Lanthanide ions Ln + = Eu + , Tm + and Yb + are here shown to react with H 2 O to yield hydroxides LnOH + . Additionally, under low-energy conditions such reactions must be exothermic, which implies a lower limit of 499 kJ mol -1 for the Ln + –OH BDEs. This limit is significantly higher than previously reported for YbOH + and is unexpectedly similar to the BDE for Yb + –F. To explain this apparent anomaly, it is considered feasible that the inefficient hydrolysis reactions observed here in a quadrupole ion trap mass spectrometer may actually be endothermic. More definitive and broad-based evaluations and comparisons require additional and more reliable BDEs and ionization energies for key lanthanide molecules, and/or energies for ligand-exchange reactions like LnF + OH ↔ LnOH + F. The hydroxide results motivated an assessment of currently available lanthanide monohalide BDEs. Among several intriguing relationships is the distinctively higher BDE for neutral LuF versus cationic LuF + , though quantifying this comparison awaits a more accurate value for the anomalously high ionization energy of LuF.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2000

A Model For The Burning of Teflon

Teflon has been identified as suitable material for use in oxygen-enriched atmospheres because of its low specific enthalpy of combustion that is, less than 1500 cal/gram. However, once ignited, Teflon burns in a heterogeneous reaction until total consumption or depletion of oxygen occurs. A model is developed for the burning of Teflon in pure, high-pressure oxygen, 3.4 to 68.9 MPa. The Teflon polymer chain dissociates via monomer units due to pyrolysis. These monomer units diffuse to the surface due to free convection. The model consists of coupled mass and energy balances for the polymer and an energy balance for the free convection of product gases. The model is used to obtain appropriate kinetic parameters for the dissociation and surface reactions. The model is validated against experimental measurements of Teflon discs supported on aluminum rods (2216) at oxygen pressures of 3.4, 6.8, 34.4, and 68.9 MPa. The model simulates the temperature distribution in the product gases above burning Teflon.

Waller, Jess M.↗