Search NASA⌕ Search

SEARCH · Search NASA

Results for “distributed clustering methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Precise relative magnitude measurement improves fracture characterization during hydraulic fracturing

SUMMARY Microseismic monitoring is an important technique to obtain detailed knowledge of in-situ fracture size and orientation during stimulation to maximize fluid flow throughout the rock volume and optimize production. Furthermore, considering that the frequency of earthquake magnitudes empirically follows a power law (i.e. Gutenberg–Richter), the accuracy of microseismic event magnitude distributions is potentially crucial for seismic risk management. In this study, we analyse microseismicity observed during four hydraulic fracture treatments of the legacy Cotton Valley experiment in 1997 at the Carthage gas field of East Texas, where fractures were activated at the base of the sand-shale Upper Cotton Valley formation. We perform waveform cross-correlation to detect similar event clusters, measure relative amplitude from aligned waveform pairs with a principal component analysis, then measure precise relative magnitudes. The new magnitudes significantly reduce the deviations between magnitude differences and relative amplitudes of event pairs. This subsequently reduces the magnitude differences between clusters located at different depths. Reduction in magnitude differences between clusters suggests that some attenuation-related biases could be effectively mitigated with relative magnitude measurements. The maximum likelihood method is applied to understand the magnitude frequency distributions and quantify the seismogenic index of the clusters. Statistical analyses with new magnitudes suggest that fractures that are more favourably oriented for shear failure have lower b-value and higher seismogenic index, suggesting higher potential for relatively larger earthquakes, rather than fractures subparallel to maximum horizontal principal stress orientation.

58 GEOSCIENCES↗

Evaluation of turbulent magnetic energy spectra in the three-dimensional wave vector domain in the solar wind

Using four-point measurements of the CLUSTER spacecraft, the energy distribution of magnetic field fluctuations in the solar wind is determined directly in the three-dimensional wave vector domain in the range 3 x 10{sup -4} rad/km < k < 3 x 10{sup -3} rad/km. The analysis method takes account of a regular tetrahedron configuration of CLUSTER and the Doppler effect. The energy distribution in the flow rest frame is anisotropic, characterized by two distinct extended structures perpendicular to the mean magnetic field and furthermore perpendicular to the flow direction. The three-dimensional distribution is averaged around the direction of the mean magnetic field direction, and then is further reduced to one-dimensional distributions in the wave number domain parallel and perpendicular to the mean magnetic field. The one-dimensional energy spectra are characterized by the power law with the index -5/3 and furthermore very close energy density between parallel and perpendicular directions to the mean magnetic field at the same wave numbers. Though the distributions and the spectra are not covered in a wide range of wave vectors, our measurements suggest that the solar wind fluctuation is anisotropic in the three-dimensional wave vector space. It is, however, rather isotropic when reduced into the parallel and perpendicular wave vector geometries due to the second anisotropy imposed by the flow direction.

58 GEOSCIENCES↗

Agglomeration Mechanism of Complex Ti-Al Oxides in Liquid Ferrous Alloys Considering High-Temperature Interfacial Phenomenon

This work presents the agglomeration mechanism of complex Ti-Al oxides in the liquid ferrous alloy. Cluster characteristics were investigated using Al and Ti/Al-complex deoxidation method in lab scale. The time-dependent size distribution, total number per volume, average size, and circularity of the clusters were quantitatively analyzed. Furthermore, high-temperature confocal laser scanning microscopy was utilized to directly observe the cluster formation of Ti-Al oxides. A capillary force model including wettability parameters was applied to compare the agglomeration capabilities of different types of non-metallic inclusions. When a low Ti is added into melt, the agglomeration of TiO{sub x}·FeO liquid inclusions is one of the key factors to decrease the frequency of cluster formation. When the Al is added into melt, the heterogeneous precipitation on TiO{sub x}·FeO surfaces is the main reaction process. Ti-Al oxides have lower agglomeration ability than that of Al{sub 2}O{sub 3}, which in turn, contribute to a low agglomeration frequency as well.

36 MATERIALS SCIENCE↗

Constraining Galaxy-Halo connection using machine learning

We investigate the potential of machine learning (ML) methods to model small-scale galaxy clustering for constraining Halo Occupation Distribution (HOD) parameters. Our analysis reveals that while many ML algorithms report good statistical fits, they often yield likelihood contours that are significantly biased in both mean values and variances relative to the true model parameters. This highlights the importance of careful data processing and algorithm selection in ML applications for galaxy clustering, as even seemingly robust methods can lead to biased results if not applied correctly. ML tools offer a promising approach to exploring the HOD parameter space with significantly reduced computational costs compared to traditional brute-force methods if their robustness is established. Using our ANN-based pipeline, we successfully recreate some standard results from recent literature. Properly restricting the HOD parameter space, transforming the training data, and carefully selecting ML algorithms are essential for achieving unbiased and robust predictions. Among the methods tested, artificial neural networks (ANNs) outperform random forests (RF) and ridge regression in predicting clustering statistics, when the HOD prior space is appropriately restricted. We demonstrate these findings using the projected two-point correlation function (w p (r p )), angular multipoles of the correlation function (ξ ℓ (r)), and the void probability function (VPF) of Luminous Red Galaxies from Dark Energy Spectroscopic Instrument mocks. Our results show that while combining w p (r p ) and VPF improves parameter constraints, adding the multipoles ξ 0 , ξ 2 , and ξ 4 to w p (r p ) does not significantly improve the constraints.

cosmology↗

Pressure Profiles of Distant Galaxy Clusters in the Planck Catalogue

Successive releases of Planck data have demonstrated the strength of the Sunyaev–Zeldovich (SZ) effect in detecting hot baryons out to the galaxy cluster peripheries. To infer the hot gas pressure structure from nearby galaxy clusters to more distant objects, we developed a parametric method that models the spectral energy distribution and spatial anisotropies of both the Galactic thermal dust (GTD) and the cosmic microwave background (CMB), which are combined with the cluster SZ and dust signals. Taking advantage of the best angular resolution of the High Frequency Instrument channels (5 arcmin) and using X-ray priors in the innermost cluster regions that are not resolved with Planck, this modeling allowed us to analyze a sample of 61 nearby members of the Planck Catalogue of SZ sources (0<z<0.5, z-tilde =0.15) using the full mission data, as well as to examine a distant sample of 23 clusters (0.5<z<1, z-tilde =0.56) that have been recently followed-up with XMM-Newton and Chandra observations. We find that (i) the average shape of the mass-scaled pressure profiles agrees with results obtained by the Planck Collaboration in the nearby cluster sample, and that (ii) no sign of evolution is discernible between averaged pressure profiles of the low- and high-redshift cluster samples. In line with theoretical predictions for these halo masses and redshift ranges, the dispersion of individual profiles relative to a self-similar shape stays well below 10% inside r {sub 500} but increases in the cluster outskirts.

79 ASTRONOMY AND ASTROPHYSICS↗

Scalable edge clustering of dynamic graphs via weighted line graphs

Timestamped relational datasets consisting of records (or connections) between pairs of entities are ubiquitous in network science. For applications like peer-to-peer communication, email, various social network interactions, and computer network security, it is useful to organize these records into groups based on how and when they are occurring. Weighted line graphs offer a natural way to model how records are related in such datasets but for large real-world graph topologies, building and utilizing the line graph is prohibitively expensive. Here, we present the framework to cluster the edges of a dynamic graph via the associated line graph that contains two major contributions. The first is a method to work with the line graph implicitly and the second is a distributed scale implementation of an agglomerative hierarchical graph clustering algorithm. We outline a novel hierarchical dynamic graph edge clustering approach that efficiently breaks massive relational datasets into small sets of edges containing events at various timescales. This is in stark contrast to traditional graph clustering algorithms that prioritize highly connected (clique-like) community structures. Our approach relies on constructing a sufficient subgraph of a weighted line graph and applying a hierarchical agglomerative clustering. This approach is related to scalable techniques from spatial clustering, nonlinear-dimension reduction, topological data analysis, and draws particular inspiration from HDBSCAN. As an edge clustering, this method yields an overlapping node clustering. Our algorithm is parallelizable and we demonstrate efficient clustering of a billion-scale, real-world dynamic graph into small edge sets that correlate in topology and time. The entire clustering process for a graph with tens of billions of edges takes just a few minutes of run time on 256 nodes of a distributed compute environment. We argue how the output of the edge clustering is useful for a multitude of data visualization and powerful machine learning tasks, both involving the original massive dynamic graph data and metadata associated with the nodes and edges. Finally, we describe how this approach can be extended to dynamic hypergraphs and dynamic graphs/hypergraphs with unstructured data living on vertices and edges.

Data Analysis↗

NWChem: Quantum Chemistry Simulations at Scale

Methods based on quantum mechanics equations have been developed since the 1930's with the purpose of accurately studying the electronic structure of molecules. However, it is only during the last two decades that intense development of new computational algorithms has opened the possibility of performing accurate simulations of challenging molecular processes with high-order many-body methods. A wealth of evidence indicates that the proper inclusion of instantaneous interactions between electrons (or the so-called electron correlation effects) is indispensable for the accurate characterization of chemical reactivity, molecular properties, and interactions of light with matter. The availability of reliable methods for benchmarking of medium-size molecular systems provides also a unique chance to propagate high-level accuracy across spatial scales through the multiscale methodologies. Some of these methods have potential to utilize computational resources in an effi*cient way since they are characterized by high numerical complexity and appropriate level of data granularity, which can be effi*ciently distributed over multi-processor architectures. The broad spectrum of coupled cluster (CC) methods falls into this class of methodologies. Several recent CC implementations clearly demonstrated the scalability of CC formalisms on architectures composed of hundreds thousand computational cores. In this context NWChem provides a collection of Tensor Contraction Engine (TCE) generated parallel implementations of various coupled cluster methods capable of taking advantage of many thousand of cores on leadership class parallel architectures.

chemistry↗

Quantitative characterization of spatial distribution of particles in materials: Application to materials processing

Most engineering materials contain second phase particles or fibers which serve to reinforce the matrix phase. The effect of reinforcements on material properties is usually analyzed in terms of the average volume fraction and spacing of reinforcements, quantities which are global microstructural characteristics. However, material properties can also depend on local microstructural characteristics; for example, on how uniformly the reinforcing phase is distributed in the material. The analysis method will then be applied to a materials processing problem to discover how processing parameters can be selected to maximize redistribution of the reinforcing phase during processing. Several mathematical analysis methods could be adapted to the problem of characterizing the distribution of particles in materials. A tessellation-based method was selected. In the first phase of the investigation, a software package was written to automate the analysis. Typical results are shown. The analysis technique allows the degree to which particles are clustered together, the size and spacing of particle clusters, and the particle density in clusters to be found. The analysis methods were applied to computer-generated distributions and to a few real particle-containing materials. Methods for analyzing a nonuniform particle distribution in a material can be applied to two broad classes of materials science problems: understanding how the resulting particle distribution affects properties. The analysis method described is applied to a materials processing problem: how to select extrusion conditions to maximize the redistribution of reinforcing particles that are initially nonuniformly distributed. In addition, the tessellation-based method to analyze star distributions in spiral galaxies was adapted, illustrating the diverse types of problems to which the analysis method can be applied.

Parse, J. B.↗

HIERARCHICAL STELLAR STRUCTURES IN THE LOCAL GROUP DWARF GALAXY NGC 6822

We present a comprehensive study of the star cluster population and the hierarchical structure in the clustering of blue stars with ages {approx}<500 Myr in the Local Group dwarf irregular galaxy NGC 6822. Our observational material comprises the most complete optical stellar catalog of the galaxy from imaging with the Suprime-Cam at the 8.2 m Subaru Telescope. We identify 47 distinct star clusters with the application of the nearest-neighbor density method to this catalog for a detection threshold of 3{sigma} above the average stellar density. The size distribution of the detected clusters can be very well approximated by a Gaussian with a peak at {approx}68 pc. The total stellar masses of the clusters are estimated by extrapolating the cumulative observed stellar mass function of all clusters to be in the range 10{sup 3}-10{sup 4} M{sub sun}. Their number distribution is fitted very well by a power law with index {alpha} {approx} 1.5 {+-} 0.7, which is consistent with the cluster mass functions of other Local Group galaxies and the cluster initial mass function. In addition to the detected star clusters of the galaxy, the application of the nearest-neighbor density method for various density thresholds, other than 3{sigma}, enabled the identification of stellar concentrations in various lengthscales. The stellar density maps constructed with this technique provide a direct proof of hierarchically structured stellar concentrations in NGC 6822, in the sense that smaller dense stellar concentrations are located inside larger and looser ones. We illustrate this hierarchy by the so-called dendrogram, or structure tree of the detected stellar structures, which demonstrates that most of the detected structures split up into several substructures over at least three levels. We quantify the hierarchy of these structures with the use of the minimum spanning tree method. We find that structures detected at 1, 2, and 3{sigma} density thresholds are hierarchically constructed with a fractal dimension of D {approx} 1.8. Some of the larger stellar concentrations, particularly in the northern part of the central star-forming portion of the galaxy, coincide with IR-bright complexes previously identified with Spitzer and associated with high column density neutral gas, indicating structures that currently form stars. The morphological hierarchy in stellar clustering, which we observe in NGC 6822, resembles that of the turbulent interstellar matter, suggesting that turbulence on pc and kpc scales has been probably the major agent that regulated clustered star formation in NGC 6822.

79 ASTRONOMY AND ASTROPHYSICS↗

THE TEMPERATURE DISTRIBUTION OF HORIZONTAL BRANCH STARS: METHODS AND FIRST RESULTS

As part of a large project aimed at characterizing the ultraviolet (UV) properties of globular clusters, we present here a theoretical and observational analysis aimed at setting the framework for the determination of horizontal branch (HB) temperature distributions. Indeed this is crucial information needed to understand the physical parameters shaping the HB morphology in globular clusters and to interpret the UV emission from unresolved stellar systems. We found that the use of zero age HB color-T {sub eff} relations is a robust way to derive effective temperatures of individual HB stars. We investigated the most suitable colors for temperature estimates and the effect on the color-T {sub eff} relations of variations of the initial chemical composition and the evolution off the zero age HB. As a test case, we applied our color-T {sub eff} calibrations to the Galactic globular cluster M15. The photometry of M15 has been obtained with the Wide Field and Planetary Camera 2 on board the Hubble Space Telescope. The HB of M15 turned out to have a multimodal distribution, with a main component peaking at T{sub eff} ∼ 8000 K and confined below T{sub eff} ∼ 10,000 K. The second component peaks at T{sub eff} ∼ 14,000 K and extends up to T{sub eff} ∼ 20,000 K. The vast majority ( ∼ 95%) of the HB stars in M15 is below 20,000 K, in agreement with the lack of a well populated extreme HB observed in other metal-poor globular clusters. We also verified that the temperatures derived with our analysis are consistent with spectroscopic estimates available in the literature.

79 ASTRONOMY AND ASTROPHYSICS↗

alpha-decay half-lives of superheavy elements with the Dirac-Brueckner-Hartree-Fock (DBHF) nucleon effective interaction

The nucleon effective interaction is calculated in the framework of the Dirac-Brueckner-Hartree-Fock approach, which has been illustrated to reproduce well the ground-state properties and the experimental data of proton and alpha particle scattering off nuclei. The nuclear potential of the alpha-nucleus is obtained by doubly folding the nucleon effective interaction with respect to the density distributions of both the alpha particle and daughter nucleus. We apply this new nuclear potential of the alpha-nucleus to investigate the alpha-decay half-lives of superheavy elements in the preformed cluster model along with the experimental decay energies Q{sub exp}. Good agreement with the experimental data is achieved. We also systematically calculate the alpha-decay half-lives for 19 isotope chains (Z=102-120) in this framework using the theoretical alpha-decay energies Q{sub th} extracted from the Moeller-Nix-Kratz mass table. The predicted results are compared with those obtained by using the same Q{sub th} but the nuclear potentials evaluated with M3Y effective interaction and also with the results calculated in the empirical formulas of the Viola-Seaberg-Sobiczewski formula.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

A Two-Step Time-Series Data Clustering Method for Building-Level Load Profile: Preprint

Residential and commercial buildings have huge potential to contribute value to improve grid resilience by participating grid services. To reveal the significant value, it is critical to estimate the grid service capability from these buildings. Unlike the large-scale distributed energy resources such as wind and solar farms, those buildings need to participate grid services in aggregation, not by individual. Therefore, it is important to appropriately group buildings for aggregation. In this paper, we develop a load profile clustering method to classify the building-level load profiles for grid service capability estimation. In our two-step clustering approach, we first calculate the total load consumption for each building, clustering the load profiles based on energy consumption level. Then, we further cluster the load profiles in each energy cluster based on the load shape. The parameter selection for each clustering step is discussed. The proposed method is applied on actual building-level load profiles, and the results have proved the effectiveness of this method.

advanced metering infrastructure (AMI)↗

DYNAMICAL STUDY OF A1689 FROM WIDE-FIELD VLT/VIMOS SPECTROSCOPY: MASS PROFILE, CONCENTRATION PARAMETER, AND VELOCITY ANISOTROPY

We examine the dynamics structure of the rich cluster A1689, combining VLT/VIMOS spectroscopy with Subaru/Suprime-Cam imaging. The radial velocity distribution of {approx}500 cluster members is bounded by a pair of clearly defined velocity caustics, with a maximum amplitude of {approx}|4000| km s{sup -1} at {approx_equal} 300 h {sup -1} kpc, beyond which the amplitude steadily declines, approaching zero velocity at a limiting radius of {approx}2 h {sup -1} Mpc. We derive the three-dimensional velocity anisotropy and galaxy number density profiles using a model-independent method to solve the Jeans equation, simultaneously incorporating the observed velocity dispersion profile, the galaxy counts from deep Subaru imaging, and our previously derived cluster mass profile from a joint lensing and X-ray analysis. The velocity anisotropy is found to be predominantly radial at large radius, becoming increasingly tangential towards the center, in accord with expectations. We also analyze the galaxy data independently of our previous analysis using two different methods: The first is based on a solution of the Jeans equation assuming an Navarro-Frenk-White (NFW) form for the mass distribution, whereas in the second method the caustic amplitude is used to determine the escape velocity. The cluster virial mass derived by both of these dynamical methods is in good agreement with results from our earlier lensing and X-ray analysis. We also confirm the high NFW concentration parameter, with results from both methods combined to yield c {sub vir} > 13 (1{sigma}). The inferred virial radius is consistent with the limiting radius where the caustics approach zero velocity and where the counts of cluster members drop off, suggesting that infall onto A1689 is currently not significant.

79 ASTRONOMY AND ASTROPHYSICS↗

Icosahedral short-range order in amorphous Cu80Si20 by ab initio molecular dynamics simulation study

Short-range order in liquid and amorphous structures of Cu80Si20 is studied by ab initio molecular dynamics simulations. We performed the simulations at 1140 and 300 K respectively to investigate the local structure change from liquid to amorphous. The result of structure factor in comparison with experimental data indicates that our simulation of amorphous Cu80Si20 is reliable. By using the bond-angle distribution function, Honeycutt–Andersen index, Voronoi tessellation method, and the atomistic cluster alignment method, the icosahedral short-range order in the system is revealed. Strong Cu–Si interaction was also observed.

36 MATERIALS SCIENCE↗

redMaPPer. I. Algorithm and SDSS DR8 catalog

We describe redMaPPer, a new red sequence cluster finder specifically designed to make optimal use of ongoing and near-future large photometric surveys. The algorithm has multiple attractive features: (1) it can iteratively self-train the red sequence model based on a minimal spectroscopic training sample, an important feature for high-redshift surveys. (2) It can handle complex masks with varying depth. (3) It produces cluster-appropriate random points to enable large-scale structure studies. (4) All clusters are assigned a full redshift probability distribution P(z). (5) Similarly, clusters can have multiple candidate central galaxies, each with corresponding centering probabilities. (6) The algorithm is parallel and numerically efficient: it can run a Dark Energy Survey-like catalog in ∼500 CPU hours. (7) The algorithm exhibits excellent photometric redshift performance, the richness estimates are tightly correlated with external mass proxies, and the completeness and purity of the corresponding catalogs are superb. We apply the redMaPPer algorithm to ∼10, 000 deg{sup 2} of SDSS DR8 data and present the resulting catalog of ∼25,000 clusters over the redshift range z in [0.08, 0.55]. The redMaPPer photometric redshifts are nearly Gaussian, with a scatter σ {sub z} ≈ 0.006 at z ≈ 0.1, increasing to σ {sub z} ≈ 0.02 at z ≈ 0.5 due to increased photometric noise near the survey limit. The median value for |Δz|/(1 + z) for the full sample is 0.006. The incidence of projection effects is low (≤5%). Detailed performance comparisons of the redMaPPer DR8 cluster catalog to X-ray and Sunyaev-Zel'dovich catalogs are presented in a companion paper.

79 ASTRONOMY AND ASTROPHYSICS↗

From Femtoseconds to Gigaseconds: The SolDeg Platform for the Performance Degradation Analysis of Silicon Heterojunction Solar Cells

Heterojunction Si solar cells exhibit notable performance degradation. Here, we modeled this degradation by electronic defects getting generated by thermal activation across energy barriers over time. To analyze the physics of this degradation, we developed the SolDeg platform to simulate the dynamics of electronic defect generation. First, femtosecond molecular dynamics simulations were performed to create a-Si/c-Si stacks, using the machine learning-based Gaussian approximation potential. Second, we created shocked clusters by a cluster blaster method. Third, the shocked clusters were analyzed to identify which of them supported electronic defects. Fourth, the distribution of energy barriers that control the generation of these electronic defects was determined. Fifth, an accelerated Monte Carlo method was developed to simulate the thermally activated time-dependent defect generation across the barriers. Our main conclusions are as follows. (1) The degradation of a-Si/c-Si heterojunction solar cells via defect generation is controlled by a broad distribution of energy barriers. (2) We developed the SolDeg platform to track the microscopic dynamics of defect generation across this wide barrier distribution and determined the time-dependent defect density N(t) from femtoseconds to gigaseconds, over 24 orders of magnitude in time. (3) We have shown that a stretched exponential analytical form can successfully describe the defect generation N(t) over at least 10 orders of magnitude in time. (4) We found that in relative terms, Voc degrades at a rate of 0.2%/year over the first year, slowing with advancing time. (5) We developed the time correspondence curve to calibrate and validate the accelerated testing of solar cells. We found a compellingly simple scaling relationship between accelerated and normal times t normal ∝ t accel T(accel)/T(normal) . (6) We also carried out experimental studies of defect generation in a-Si:H/c-Si stacks. We found a relatively high degradation rate at early times that slowed considerably at longer time scales.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Joining X-Ray to Lensing: An Accurate Combined Analysis of MACS J0416.1–2403

We present a novel approach for a combined analysis of X-ray and gravitational lensing data and apply this technique to the merging galaxy cluster MACS J0416.1–2403. The method exploits the information on the intracluster gas distribution that comes from a fit of the X-ray surface brightness and then includes the hot gas as a fixed mass component in the strong-lensing analysis. With our new technique, we can separate the collisional from the collision-less diffuse mass components, thus obtaining a more accurate reconstruction of the dark matter distribution in the core of a cluster. We introduce an analytical description of the X-ray emission coming from a set of dual pseudo-isothermal elliptical mass distributions, which can be directly used in most lensing softwares. By combining Chandra observations with Hubble Frontier Fields imaging and Multi Unit Spectroscopic Explorer spectroscopy in MACS J0416.1–2403, we measure a projected gas-to-total mass fraction of approximately 10% at 350 kpc from the cluster center. Compared to the results of a more traditional cluster mass model (diffuse halos plus member galaxies), we find a significant difference in the cumulative projected mass profile of the dark matter component and that the dark matter over total mass fraction is almost constant, out to more than 350 kpc. In the coming era of large surveys, these results show the need of multiprobe analyses for detailed dark matter studies in galaxy clusters.

79 ASTRONOMY AND ASTROPHYSICS↗

Using Signal Clustering Similarity for Detecting CAN Masquerade Attacks

The computer code assumes that time series representing the physical signals of the vehicle have been extracted from the CAN bus. The main input of the computer code is the multivariate time series representation of the signals in the CAN bus. The computer code cluster these time series using agglomerative hierarchical clustering from benign and attack datasets. Based on this, it generates probability distributions from the similarity of the obtained clusters based in each scenario---benign and attack---using the CluSim method (https://github.com/Hoosier-Clusters/clusim). Finally, it compares how a new data collection compares with the previous distribution to provide and probability score for an intrusion.

Moriano, Pablo↗