SEARCH · Search NASA
Results for “distributed energy program”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
2012 Market Report on U.S. Wind Technologies in Distributed Applications
At the end of 2012, U.S. wind turbines in distributed applications reached a 10-year cumulative installed capacity of more than 812 MW from more than 69,000 units across all 50 states. In 2012 alone, nearly 3,800 wind turbines totaling 175 MW of distributed wind capacity were documented in 40 states and in the U.S. Virgin Islands, with 138 MW using utility-scale turbines (i.e., greater than 1 MW in size), 19 MW using mid-size turbines (i.e., 101 kW to 1 MW in size), and 18.4 MW using small turbines (i.e., up to 100 kW in size). Distributed wind is defined in terms of technology application based on a wind project’s location relative to end-use and power-distribution infrastructure, rather than on technology size or project size. Distributed wind systems are either connected on the customer side of the meter (to meet the onsite load) or directly to distribution or micro grids (to support grid operations or offset large loads nearby). Estimated capacity-weighted average costs for 2012 U.S. distributed wind installations was $\$$2,540/kW for utility-scale wind turbines, $\$$2,810/kW for mid-sized wind turbines, and $\$$6,960/kW for newly manufactured (domestic and imported) small wind turbines. An emerging trend observed in 2012 was an increased use of refurbished turbines. The estimated capacity-weighted average cost of refurbished small wind turbines installed in 2012 was $\$$4,080/kW. As a result of multiple projects using utility-scale turbines, Iowa deployed the most new overall distributed wind capacity, 37 MW, in 2012. Nevada deployed the most small wind capacity in 2012, with nearly 8 MW of small wind turbines installed in distributed applications. In the case of mid-size turbines, Ohio led all states in 2012 with 4.9 MW installed in distributed applications. State and federal policies and incentives continued to play a substantial role in the development of distributed wind projects. In 2012, U.S. Treasury Section 1603 payments and grants and loans from the U.S. Department of Agriculture’s Rural Energy for America Program were the main sources of federal funding for distributed wind projects. State and local funding varied across the country, from rebates to loans, tax credits, and other incentives. Reducing utility bills and hedging against potentially rising electricity rates remain drivers of distributed wind installations. In 2012, other drivers included taking advantage of the expiring U.S. Treasury Section 1603 program and a prosperous year for farmers. While 2012 saw a large addition of distributed wind capacity, considerable barriers and challenges remain, such as a weak domestic economy, inconsistent state incentives, and very competitive solar photovoltaic and natural gas prices. The industry remains committed to improving the distributed wind marketplace by advancing the third-party certification process and introducing alternative financing models, such as third-party power purchase agreements and lease-to-own agreements more typical in the solar photovoltaic market. Continued growth is expected in 2013.
Long and Winding Road to Higher Efficiency-The RTU Story: Preprint
Rooftop units (RTUs) and other packaged heating, ventilating, and air-conditioning (HVAC) equipment consume more than four quads of energy annually while conditioning more than 50% of the commercial building floor area in the United States. Historically, these systems have low operating efficiencies and receive infrequent maintenance. In addition, the market has a low first cost, run-to-failure, like-for-like replacement mentality and has been slow to adopt change. This paper explores the broad market transformation that has resulted in higher efficiencies and tremendous energy savings. Although there are many factors in this market transformation, this paper highlights: research behind advancements in components and controls; adoption of an operational efficiency metric; raising the bar for high efficiency with the RTU Challenge; market barriers overcome through the Advanced RTU Campaign; upstream and midstream incentive programs and HVAC distribution networks; alignment of the market efficiency drivers of ASHRAE Standard 90.1, federal minimum efficiency standards, the ENERGY STAR® program, and the Consortium for Energy Efficiency's (CEE's) efficiency tiers. Measures of the market transformation include more than 50% increase in RTU efficiencies, more than 1 billion kWh saved and 160,000 RTUs upgraded with high-efficiency measures by the Advanced RTU Campaign partners, large increases of high-efficiency RTUs purchased through incentive programs, and the largest energy savings from any federal minimum standards action. Although these results are impressive, the market transformation is just beginning, and there remain exciting opportunities for improvements in equipment efficiencies and improved operating performance with advanced controls and fault detection and diagnostics.
Trading strategies for distribution company with stochastic distributed energy resources
This paper proposes a methodology to address the trading strategies of a proactive distribution company (PDISCO) engaged in the transmission-level (TL) markets. A one-leader multi-follower bilevel model is presented to formulate the gaming framework between the PDISCO and markets. The lower-level (LL) problems include the TL day-ahead market and scenario-based real-time markets, respectively with the objectives of maximizing social welfare and minimizing operation cost. The upper-level (UL) problem is to maximize the PDISCO’s profit across these markets. The PDISCO’s strategic offers/bids interactively influence the outcomes of each market. Since the LL problems are linear and convex, while the UL problem is non-linear and non-convex, an equivalent primal–dual approach is used to reformulate this bilevel model to a solvable mathematical program with equilibrium constraints (MPEC). The effectiveness of the proposed model is verified by case studies.
Microgrids, Infrastructure Resilience, and Advanced Controls Launchpad (MIRACL): Use Cases and Definitions
This resource document is designed to establish common use cases and definitions for U.S. Department of Energy national laboratories and partners participating in the Microgrids, Infrastructure Resilience, and Advanced Controls Launchpad (MIRACL) effort. Use case definitions can be used to classify and connect research-and-development efforts and ultimately to organize project goals. Establishing use cases will also allow for the definition of operational benchmarks for various elements of the MIRACL project and broader distributed wind program as well as enable future alignment with other distributed energy resource research projects.
Enhanced numerical design of two-barrier infrared detectors with III–V compounds heterostructures considering the influence of lattice strain and misfit dislocations on the band gap
The goal of this work is the design of efficient infrared radiation detectors based on InAsSb compounds with two energy barriers around the absorber region. Two types of two-barrier detectors that work in the 3–5.5 μm wavelength range at 230 K is designed. Using our computer program to iteratively solve the Poisson equation, the spatial distribution of energy band edges in III–V heterostructures was calculated The influence of lattice stress, bending of the structure and doping on the energy shift of the edge of the bands is considered. Lattice strain is the cause of the formation of the misfit dislocations at the boundaries of the individual layers of the heterostructure. These dislocations partially relax the resulting stress and affect the lattice deformation in individual layers. From the minimum elastic energy condition, the density of these dislocations is determined. It has been shown that the band offset can be eliminated in the areas of both barriers in the designed two-barrier detectors.
Statistical characteristics of cloud variability. Part 2: Implication for parameterizations of microphysical and radiative transfer processes in climate models
The effects of subgrid cloud variability on grid-average microphysical rates and radiative fluxes are examined by use of long-term retrieval products at the Tropical West Pacific, Southern Great Plains, and North Slope of Alaska sites of the Department of Energy's Atmospheric Radiation Measurement program. Four commonly used distribution functions, the truncated Gaussian, Gamma, lognormal, and Weibull distributions, are constrained to have the same mean and standard deviation as observed cloud liquid water content. The probability density functions are then used to upscale relevant physical processes to obtain grid-average process rates. It is found that the truncated Gaussian representation results in up to 30% mean bias in autoconversion rate, whereas the mean bias for the lognormal representation is about 10%. The Gamma and Weibull distribution function performs the best for the grid-average autoconversion rate with the mean relative bias less than 5%. For radiative fluxes, the lognormal and truncated Gaussian representations perform better than the Gamma and Weibull representations. The results show that the optimal choice of subgrid cloud distribution function depends on the nonlinearity of the process of interest, and thus, there is no single distribution function that works best for all parameterizations. Examination of the scale (window size) dependence of the mean bias indicates that the bias in grid-average process rates monotonically increases with increasing window sizes, suggesting the increasing importance of subgrid variability with increasing grid sizes.
Three-dimensional equilibria and island energy transport due to resonant magnetic perturbation edge localized mode suppression on DIII-D
In this research, we conducted experiments in the DIII-D tokamak that show that the plasma responds to resonant magnetic perturbations (RMPs) with toroidalmode numbers of n=2 and n=3 without field line reconnection, consistent with resistive magnetohydrodynamic predictions, while a strong nonlinear bifurcation is apparent when edge localized modes(ELMs) are suppressed. The magnetic response associated with this bifurcation is localized to the high field side of the machine and exhibits a dominant n=1 component despite the application of a constant amplitude, slowly toroidally rotating, n=2 applied field. The n=1 mode is born locked to the vacuum vessel wall, while the n=2 mode is entrained to the rotating field. Based on these magnetic response measurements and Thomson scattering measurements of flattening of the electron temperature profile, it is likely that these modes are magnetic island chains near the H-mode pedestal. The reduction in ∇Te occurs near the q=4 and 5 rational surfaces, suggesting five unique islands are possible (m=8, 9, or 10 for n=2) and (m=4 or 5 for n=1). In all cases, the island width is estimated to be 2–3 cm. The Chang-Callen calculated confinement degradation due to the presence of an individual island of this size is 8%–12%, which is close to the 13%–14% measured between the ELMs and suppressed states. In conclusion, this suggests that edge tearing modes may alter the pedestal causing peeling-ballooning stability during RMP induced ELM suppression.
Decarbonization Technology Snapshot: Heat Pump Water Heaters
Heat pump water heaters use electricity to move heat from one place to another instead of generating heat directly. In many cases they replace gas-fired water heaters and are significantly more energy efficient, reducing on-site Scope 1 emissions and often resulting in reduced total emissions.
Foundations for Engineering Education for Distributed Energy Resources (FEEDER)
Foundations for Engineering Education for Distributed Energy Resources (FEEDER), as one of the four Distributed Technology Training Consortia (DTTCs) of the Grid Engineering for Accelerated Renewable Energy Deployment (GEARED) National Network, provided programs to meet the project goals, and works closely with the GEARED National Network Administrator (NNA) to foster student competence and career interest in advanced engineering and professional skills that support a robust electrical utility sector. This educational effort also included annual gatherings to share best practices and specific advances in knowledge, instructional best practice and educational integration throughout disciplines supporting power systems analysis and integration of distributed generation, with a focus on renewable energy. This effort aligned with the goals and objectives of the Department of Energy SunShot initiative. The project goals included the creation of a larger skilled electric grid workforce that is able to manage widespread deployment of distributed energy resources by developing and sharing new courses and curricula across the participating FEEDER institutions. FEEDER was expanded to add four institutions under the Solar Training & Education for Professionals (STEP) program, with the title Strategic Expansion to Achieve GEARED Goals and award number DE- EE0007327. Program components were selected based on gap analysis and advices of FEEDER industry advisory board, with a focus on student participation in power programs, research and formative experiences that led them to successful careers in power-related industries.
Tachyon: Intelligent Multi-Scale Modeling of Distributed Resilient Infrastructure and Workflows for Data Intensive HEP Analyses
The DOE High Energy Physics (HEP) program in Neutrino and Collider science drives data-intensive science and simulation on extreme-scale platforms. Modeling and optimizing the complex distributed components from experimental to leadership computing facilities are essential for HEP workflows to achieve required response times and resilience under various conditions. Tachyon proposes a framework for scalable modeling, simulation, and validation of key performance characteristics for the distributed infrastructure between FNAL and ALCF, along with associated HEP workflows.
Tachyon: Intelligent Multi-Scale Modeling of Distributed Resilient Infrastructure and Workflows for Data Intensive HEP Analyses
The DOE High Energy Physics (HEP) program in Neutrino and Collider science drives data-intensive science and simulation on extreme-scale platforms. Modeling and optimizing the complex distributed components from experimental to leadership computing facilities are essential for HEP workflows to achieve required response times and resilience under various conditions. Tachyon proposes a framework for scalable modeling, simulation, and validation of key performance characteristics for the distributed infrastructure between FNAL and ALCF, along with associated HEP workflows.
A Distributed Energy Management Approach for Residential Demand Response
The implementation of large-scale optimization and control of residential appliances to support demand response (DR) programs comes with the challenges of coordinated communication, privacy, and consideration of customer preferences. Solving this complexity is best suited through a distributed optimization and control approach at the residential level by leveraging the availability and intelligence of a home energy management systems (HEMS). In this paper, a hierarchical control scheme to coordinate large-scale residential demand response through coordination of HEMs is proposed. This scheme is based on the exchange of a reward price and aggregated load information between utility system and HEMS. Numerical results on a one hundred-house model demonstrate the computational efficiency of the proposed approach.
Guide to the Distributed Energy Resource Risk Management Framework
The emergence of distributed energy resources (DERs) has transformed the electric power sector and will likely have even more profound impacts on the future evolution of the United States energy sector as it modernizes and becomes more reliant upon complex informatics programming and systems to ensure that our power grid remains safe from malicious interference. To mitigate risks associated with the increased and diversified use of DERs, the Distributed Energy Resource Cybersecurity Framework (DER-CF) was developed in 2019. The National Renewable Energy Laboratory extended the scope of the DER-CF to include the RMF. To address the challenges faced by federal energy managers and energy system stakeholders in applying the RMF to DER systems, the Distributed Energy Resource Risk Manager (DER-RM) is a six-step process to proactively manage cybersecurity risk in a methodical manner. The DER-RM is independent of the DER-CF's existing assessment, allowing users to focus specifically on the RMF steps. The tools are targeted to different processes - DER-CF enables organizations to perform self-assessments to improve their cybersecurity posture, while DER-RM assists organizations in achieving compliance with specific requirements. This document provides an overview of the DER-RM. The RMF process outlined in this report serves as a guide to diagnose information and operational system threats, gather required materials to comply with industry standards, and document plans for achieving Authority to Operate. Using the DER-RM, federal agencies and other organizations can easily and intuitively follow the RMF process, manage the risks to their grid-edge infrastructure through the integration of their on-site DERs, and comply with appropriate requirements.
HOME ENERGY SCORE INTEGRATION TIME-OF-USE FOR STATE, MUNICIPAL AND UTILITY PROGRAM IMPLEMENTATION
Explore the source record for details and available documents.
When Do Efficiency and Demand Flexibility Go Hand-in-hand?
Utilities have been experimenting with integrated demand side management (IDSM) programs since the 2000s. The potential benefits of improved program cost-effectiveness and customer engagement from combining energy efficiency (EE), demand flexibility (DF), and other distributed energy resources into an integrated customer offering have been recognized although there are several known regulatory and program administrative challenges. In addition, as buildings adopt EE measures, the baseline load profile change generally reduces the potential load that can be shed or shifted. This has been a significant technical barrier for customers and program implementers. However, it is a myth that EE always reduces DF. Load change from EE can be time-varying. Therefore, whether EE improves or reduces DF should be evaluated on an individual measure basis accounting for weather dependencies and interactions. For IDSM program design purpose, it is useful to understand how common EE features influence DF and the underlying building physics. In this paper, we use parametric simulations of a prototype medium office building to evaluate how various EE features influence DF, measured by a “demand decrease intensity” (W/ft2) metric. These EE features cover envelope characteristics, internal loads, and airside HVAC system. The parametric analysis shows that some efficient HVAC control measures will increase DF but not the traditional building envelope, lighting, and ventilation-related efficiency measures. These findings contribute to the technical basis for achieving enhanced energy benefits by packaging appropriate HVAC control measures in IDSM program design. Program developers should further validate these results in targeted pilot projects.
DER Cybersecurity R&D
The National Renewable Energy Laboratory (NREL) conducted more than 30 assessments for utilities across the United States with a cybersecurity assessment tool based on the U.S. Department of Energy (DOE) Cybersecurity Capability Maturity Model (C2M2) and the National Institute of Standards and Technology (NIST) Cybersecurity Framework (CSF) and focused on business process. With funding from the DOE Office of Renewable Energy and Energy Efficiency Federal Energy Management Program, NREL modified the current cyber governance assessment tool to include an assessment process specifically for distributed energy resources (DERs). The Distributed Energy Resources Cybersecurity Framework (DER-CF) was developed to help federal agencies mitigate gaps in their cybersecurity posture for distributed energy systems.
Collision energy dependence of second-order off-diagonal and diagonal cumulants of net-charge, net-proton and net-kaon multiplicity distributions in Au+Au collisions
We report the first measurements of a complete second-order cumulant matrix of net-charge, netproton and net-kaon multiplicity distributions for the first phase of the beam energy scan program at RHIC. This includes the centrality and, for the first time, the pseudorapidity window dependence of both diagonal and off-diagonal cumulants in Au+Au collisions at $\sqrt{s_{NN}}$ = 7.7-200 GeV. Within the available acceptance of |η| < 0.5, the cumulants grow linearly with the pseudorapidity window. Relative to the corresponding measurements in peripheral collisions, the ratio of off-diagonal over 3 diagonal cumulants in central collisions indicates an excess correlation between net-charge and netkaon, as well as between net-charge and net-proton. The strength of such excess correlation increases with the collision energy. The correlation between net-proton and net-kaon multiplicity distributions is observed to be negative at $\sqrt{s_{NN}}$ = 200 GeV and change to positive at the lowest collision energy. Model calculations based on non-thermal (UrQMD) and thermal (HRG) production of hadrons cannot explain the data. Furthermore, these measurements will help map the QCD phase diagram, constrain hadron resonance gas model calculations and provide new insights on the energy dependence of baryon-strangeness correlations.