Search NASA⌕ Search

SEARCH · Search NASA

Results for “dynamic inference”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Antarctic permafrost processes and antiphase dynamics of cold-based glaciers in the McMurdo Dry Valleys inferred from 10 Be and 26 Al cosmogenic nuclides

Abstract. Soil and sediment mixing and associated permafrost processes are not widely studied or understood in the McMurdo Dry Valleys of Antarctica. In this study, we investigate the stability and depositional history of near-surface permafrost sediments to ∼ 3 m depth in the Pearse and lower Wright valleys using measured cosmogenic 10Be and 26Al depth profiles. In Pearse Valley, we estimate a minimum depositional age of ∼ 74 ka for the active layer and paleoactive-layer sediments (< 0.65 m). Combined depth profile modelling of 10Be and 26Al gives a depositional age for near-surface (< 1.65 m) permafrost in Pearse Valley of 180 +20/-40 ka, implying that the deposition of permafrost sediments predates MIS 5 advances of Taylor Glacier. Deeper permafrost sediments (> 2.09 m) in Pearse Valley are thus inferred to have a depositional age of > 180 ka. At a coastal, lower-elevation site in neighbouring lower Wright Valley, 10Be and 26Al depth profiles from a second permafrost core exhibit near-constant concentrations with depth and indicate the sediments are either vertically mixed after deposition or sufficiently young so that post-depositional nuclide production is negligible relative to inheritance. 26Al/10Be concentration ratios for both depth profiles range between 4.0 and 5.2 and are all lower than the nominal surface production rate ratio of 6.75, indicating that prior to deposition, these sediments experienced complex, yet similar, exposure–burial histories. Assuming a single-cycle exposure–burial scenario, the observed 26Al/10Be ratios are equivalent to a total minimum exposure–burial history of ∼ 1.2 Myr. In proximity to the depth profile core site, we measured cosmogenic 10Be and 26Al in three granite cobbles from thin, patchy drift (Taylor 2 Drift) in Pearse Valley to constrain the timing of retreat of Taylor Glacier. Assuming simple continuous exposure, our minimum, zero-erosion exposure ages suggest Taylor Glacier partially retreated from Pearse Valley no later than 65–74 ka. The timing of retreat after 65 ka and until the Last Glacial Maximum (LGM) when Taylor Glacier was at a minimum position remains unresolved. The surface cobble ages and permafrost processes reveal Taylor Glacier advances during MIS 5 were non-erosive or mildly erosive, preserving the underlying permafrost sediments and peppering boulders and cobbles upon an older, relict surface. Our results are consistent with U/Th ages from central Taylor Valley and suggest changes in moisture delivery over Taylor Dome during MIS 5e, 5c, and 5a appear to be associated with the extent of the Ross Ice Shelf and sea ice in the Ross Sea. These data provide further evidence of antiphase behaviour through retreat of a peripheral lobe of Taylor Glacier in Pearse Valley, a region that was glaciated during MIS 5. We suggest a causal relationship of cold-based glacier advance and retreat that is controlled by an increase in moisture availability during retreat of sea ice and perhaps the Ross Ice Shelf, as well as, conversely, a decrease during times of sea ice and Ross Ice Shelf expansion in the Ross Sea.

58 GEOSCIENCES↗
DOE OSTI2024

Sequential Inference of Hospitalization Electronic Health Records Using Probabilistic Models

In the dynamic hospital setting, decision support can be a valuable tool for improving patient outcomes. Data-driven inference of future outcomes is challenging in this dynamic setting, where long sequences such as laboratory tests and medications are updated frequently. This is due in part to heterogeneity of data types and mixed-sequence types contained in variable length sequences. In this work we design a probabilistic unsupervised model for multiple arbitrary-length sequences contained in hospitalization Electronic Health Record (EHR) data. The model uses a latent variable structure and captures complex relationships between medications, diagnoses, laboratory tests, neurological assessments, and medications. It can be trained on original data, without requiring any lossy transformations or time binning. Inference algorithms are derived that use partial data to infer properties of the complete sequences, including their length and presence of specific values. We train this model on data from subjects receiving medical care in the Kaiser Permanente Northern California integrated healthcare delivery system. The results are evaluated against held-out data for predicting the length of sequences and presence of Intensive Care Unit (ICU) in hospitalization bed sequences. Our method outperforms a baseline approach, showing that in these experiments the trained model captures information in the sequences that is informative of their future values.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Inference of cell type-specific gene regulatory networks on cell lineages from single cell omic datasets

Abstract Cell type-specific gene expression patterns are outputs of transcriptional gene regulatory networks (GRNs) that connect transcription factors and signaling proteins to target genes. Single-cell technologies such as single cell RNA-sequencing (scRNA-seq) and single cell Assay for Transposase-Accessible Chromatin using sequencing (scATAC-seq), can examine cell-type specific gene regulation at unprecedented detail. However, current approaches to infer cell type-specific GRNs are limited in their ability to integrate scRNA-seq and scATAC-seq measurements and to model network dynamics on a cell lineage. To address this challenge, we have developed single-cell Multi-Task Network Inference (scMTNI), a multi-task learning framework to infer the GRN for each cell type on a lineage from scRNA-seq and scATAC-seq data. Using simulated and real datasets, we show that scMTNI is a broadly applicable framework for linear and branching lineages that accurately infers GRN dynamics and identifies key regulators of fate transitions for diverse processes such as cellular reprogramming and differentiation.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Bayesian inference of heterogeneous epidemic models: Application to COVID-19 spread accounting for long-term care facilities

Here we propose a high dimensional Bayesian inference framework for learning heterogeneous dynamics of a COVID-19 model, with a specific application to the dynamics and severity of COVID-19 inside and outside long-term care (LTC) facilities. We develop a heterogeneous compartmental model that accounts for the heterogeneity of the time-varying spread and severity of COVID-19 inside and outside LTC facilities, which is characterized by time-dependent stochastic processes and time-independent parameters in ~ 1500 dimensions after discretization. To infer these parameters, we use reported data on the number of confirmed, hospitalized, and deceased cases with suitable post-processing in both a deterministic inversion approach with appropriate regularization as a first step, followed by Bayesian inversion with proper prior distributions. To address the curse of dimensionality and the ill-posedness of the high-dimensional inference problem, we propose use of a dimension-independent projected Stein variational gradient descent method, and demonstrate the intrinsic low-dimensionality of the inverse problem. We present inference results with quantified uncertainties for both New Jersey and Texas, which experienced different epidemic phases and patterns. Moreover, we also present forecasting and validation results based on the empirical posterior samples of our inference for the future trajectory of COVID-19.

42 ENGINEERING↗
DOE OSTI2025

Integrating Characteristic Arctic Vegetation in a Land Surface Model Improves Representation of Carbon Dynamics Across a Tundra Landscape: Modeling Archive

This modeling archive is in support of the Next-Generation Ecosystem Experiments in the Arctic (NGEE Arctic) publication "Integrating Characteristic Arctic Vegetation in a Land Surface Model Improves Representation of Carbon Dynamics Across a Tundra Landscape", by Murphy et al. (2025). This archive contains model input files and outputs from landscape-scale simulations conducted using ELM, the land model component of the Department of Energy’s Energy Exascale Earth System Model (E3SM), at the Council NGEE Arctic field site (Council Road mile marker 71) on Alaska’s Seward Peninsula. Input data and model output from two sets of ELM simulations are provided. The first set of simulations were conducted with the two default ELM Arctic plant functional types (PFTs; broadleaf deciduous boreal shrub and a C3 grass) and the second set of simulations were conducted with a set of nine Arctic-specific PFTs including nonvascular mosses and lichens, graminoids, forbs, evergreen dwarf shrubs, three height classes of deciduous shrubs (dwarf, low, and low to tall), and deciduous alder shrubs (Sulman et al., 2021). Parameter names and major parameter changes in the Arctic-specific PFT configuration are described in Sulman et al. (2021) and archived in the Sulman et al. (2021) dataset (see below). Simulations were spatially explicit, covering an approximately 6.4X3.3 km domain at the Council site with a spatial resolution of 100 m for a total of 2,112 simulated grid cells under each ELM PFT configuration. The modeling archive contains meteorological forcing (seven *.nc files and one *.txt file), a domain definition file (one *.nc files), land surface configuration files (two *.nc files), parameter files (two *.nc files), annual ELM output files spanning 1980-2014 (68 *.nc files), and a User’s Guide (*pdf file). Additional information on the provided files is in the “Modeling Archive Contents” section of the User’s Guide. Model outputs are aggregated to the column scale (i.e. PFT-specific outputs are not provided here).

Murphy, Bailey [ORNL] (ORCID:0000000203995221)↗
DOE OSTI2025

Maps of growing season gross primary production and net ecosystem exchange for Council Road Mile Marker 71, Seward Peninsula, Alaska, [2017-2023]

This data archive is in support of the Next-Generation Ecosystem Experiments in the Arctic (NGEE Arctic) publication "Integrating Characteristic Arctic Vegetation in a Land Surface Model Improves Representation of Carbon Dynamics Across a Tundra Landscape", by Murphy et al. (2025a). Murphy et al. (2025a) evaluated whether incorporating observed Arctic vegetation heterogeneity into ELM, the land model of the Department of Energy’s Energy Exascale Earth System Model (E3SM), improved simulations of tundra carbon cycling. The associated model archive can be found at Murphy et al. (2025b). The study focused on the spatial patterns and net landscape-level growing season productivity and carbon uptake. As part of this evaluation, observationally derived maps of average growing season (June–August) net ecosystem exchange (NEE) and gross primary production (GPP) were developed for the same domain. These maps, which form the dataset described here, integrate eddy covariance flux tower, remote sensing, and vegetation community data to provide spatially explicit benchmarks for model evaluation. The maps provide spatially explicit estimates of average growing season NEE and GPP across 13 tundra vegetation communities within the study domain. By combining flux tower observations with Airborne Visible-Infrared Imaging Spectrometer-Next Generation (AVIRIS-NG) hyperspectral imagery and drone-based normalized difference vegetation index (NDVI), these maps capture the heterogeneity of carbon fluxes associated with different Arctic vegetation types. While they represent average seasonal conditions rather than interannual variability, the maps provide a unique dataset for evaluating model performance, comparing vegetation community contributions to landscape-scale carbon cycling, and supporting regional analyses of Arctic carbon dynamics. This data archive contains 5 m resolution maps of vegetation communities, vegetation community average growing season GPP, and vegetation community average growing season NEE (three *.tif files), a User’s Guide (*pdf file), and Table 1 of the User’s Guide displaying vegetation community coverage and average growing season NEE and GPP values (*.csv file).

Murphy, Bailey [ORNL] (ORCID:0000000203995221)↗
DOE OSTI2020

Operator inference for non-intrusive model reduction of systems with non-polynomial nonlinear terms

Here in this work we present a non-intrusive model reduction method to learn low-dimensional models of dynamical systems with non-polynomial nonlinear terms that are spatially local and that are given in analytic form. In contrast to state-of-the-art model reduction methods that are intrusive and thus require full knowledge of the governing equations and the operators of a full model of the discretized dynamical system, the proposed approach requires only the non-polynomial terms in analytic form and learns the rest of the dynamics from snapshots computed with a potentially black-box full-model solver. The proposed method learns operators for the linear and polynomially nonlinear dynamics via a least-squares problem, where the given non-polynomial terms are incorporated on the right-hand side. The least-squares problem is linear and thus can be solved efficiently in practice. The proposed method is demonstrated on three problems governed by partial differential equations, namely the diffusion–reaction Chafee–Infante model, a tubular reactor model for reactive flows, and a batch-chromatography model that describes a chemical separation process. The numerical results provide evidence that the proposed approach learns reduced models that achieve comparable accuracy as models constructed with state-of-the-art intrusive model reduction methods that require full knowledge of the governing equations.

42 ENGINEERING↗
DOE OSTI2025

How initial conditions-, structural-, and parameter-based model uncertainty interact and influence predictions in permafrost ecosystems: Modeling Archive

This dataset contains model output and input data, as well as source code examples for the Terrestrial Ecosystem Model with the Dynamic Vegetation Model and Dynamic Organic Soil (DVM-DOS-TEM) for the field sites Imnavait creek and the Bonanza creek Long Term Ecological Research Network (LTER). The data covers simulations from the last glacial maximum (LGM) until 2100 for a selection of paleo scenarios, setting the mean temperature of the LGM up to 10°C lower than pre-industrial conditions. The model structure was modulated to represent various model versions, and this dataset contains the relevant changes in the source code. The raw output data, the processed statistical data, the setup and processing scripts as well as parameter value distribution files from a parameter sensitivity analysis are included as well. Model outputs include active layer depth, organic soil carbon, soil layer depths, gross primary productivity (GPP) with and without nitrogen limitation, net primary productivity (NPP), soil liquid water content, heterotrophic, maintenance, and growth respiration, soil temperature, and vegetation carbon (*.nc files). The Next-Generation Ecosystem Experiments in the Arctic (NGEE Arctic) project is a research effort to reduce uncertainty in the Department of Energy’s Energy Exascale Earth System Model (E3SM) by developing a predictive understanding of Arctic tundra ecosystems underlain by permafrost and to quantify feedbacks from the Arctic tundra to the Earth system. NGEE Arctic is supported by the Department of Energy's Office of Biological and Environmental Research.Over Phases 1–3, observations made by the NGEE Arctic team across a gradient of permafrost landscapes in Arctic Alaska improved the representation of tundra processes in the land surface component of E3SM (the E3SM Land Model, ELM). Model improvements emphasized unique aspects of permafrost environments and explored reductions in model complexity while retaining predictive power. The Arctic-informed ELM developed by NGEE Arctic has been used to make novel predictions on processes ranging from permafrost thaw to soil biogeochemical cycling to Earth system feedbacks associated with the unique characteristics of tundra plants. In Phase 4, the NGEE Arctic team is evaluating our new predictive understanding under novel conditions across the Arctic domain. In collaboration with partners at long-term pan-Arctic research sites we are examining whether an Arctic-informed ELM can faithfully simulate interactions among surface and subsurface processes at site, regional, and pan-Arctic scales. In turn, we are using variety of tools to dynamically extend and evaluate ELM inference, with an emphasis on data synthesis and pan-Arctic model evaluation, reintegration of code with an evolving E3SM, scaling across heterogeneous Arctic landscapes, and the appropriate representation of the impacts of increasingly frequent Arctic disturbances.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Soil Carbon Dynamics Following Land Use Changes and Conversion to Oil Palm Plantations in Tropical Lowlands Inferred From Radiocarbon

We measured the 14C and 13C isotopic values of soil organic carbon in mineral soil from lowland tropical forests to provide insight into how quickly carbon is turning over in the soil following conversion of primary forests to oil palm plantations. In addition to areas converted to oil palm plantations in Peru, Indonesia, and Cameroon, we examine pastures and secondary forests in Peru as a comparison to the carbon cycling processes operating in the oil palm plantations.This dataset includes radiocarbon (Δ14C) and stable carbon (δ13C) isotopes of soil organic carbon in mineral soils from natural lowland forests and oil palm plantations in Peru, Indonesia, and Cameroon. We additionally examine plots of secondary forests following agricultural use and pastures on cleared natural forest in Peru. In addition to isotopic data, this dataset includes soil carbon and nitrogen concentrations and stock, soil texture (percent sand, silt, and clay), pH, ECEC (effective cation exchange capacity), base saturation, and bulk density. Soils were sampled in 4 depth increments to 100 cm depth.This dataset supports the publication Finstad et al., 2020. Finstad, K., van Straaten, O., Veldkamp, E., & McFarlane, K. (2020). Soil carbon dynamics following land use changes and conversion to oil palm plantations in tropical lowlands inferred from radiocarbon. Global Biogeochemical Cycles, 34, e2019GB006461. https://doi.org/10.1029/2019GB006461

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

When action is not least for systems with action-dependent Lagrangians

The dynamics of some non-conservative and dissipative systems can be derived by calculating the first variation of an action-dependent action according to the variational principle of Herglotz. This is directly analogous to the variational principle of Hamilton commonly used to derive the dynamics of conservative systems. In a similar fashion, just as the second variation of a conservative system’s action can be used to infer whether that system’s possible trajectories are dynamically stable, so too can the second variation of the action-dependent action be used to infer whether the possible trajectories of non-conservative and dissipative systems are dynamically stable. In this paper, I show, generalizing earlier analyses of the second variation of the action for conservative systems, how to calculate the second variation of the action-dependent action and how to apply it to two physically important systems: a time-independent harmonic oscillator and a time-dependent harmonic oscillator.

Physics↗
DOE OSTI2020

Bayesian calibration of a hybrid nuclear collision model using $\textit{p}$₋Pb and Pb-Pb data at energies available at the CERN Large Hadron Collider

Here, we posit a unified hydrodynamic and microscopic description of the quark-gluon plasma (QGP) produced in ultrarelativistic p₋Pb and Pb-Pb collisions at $\sqrt{s}_\text{NN}$ = 5.02 TeV and evaluate our assertion using Bayesian inference. Specifically, we model the dynamics of both collision systems using initial conditions with parametric nucleon substructure, a preequilibrium free streaming stage, event-by-event viscous hydrodynamics, and a microscopic hadronic afterburner. Free parameters of the model, which describe the initial state and QGP medium are then simultaneously calibrated to fit charged-particle yields, mean $p_T$, and flow cumulants. We argue that the global agreement of the calibrated model with the experimental data strongly supports the existence of hydrodynamic flow in small collision systems at ultrarelativistic energies, and that the flow produced develops at length scales smaller than a single proton. Posterior estimates for the model's input parameters are obtained, and new insights into the temperature dependence of the QGP transport coefficients and event-by-event structure of the proton are discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Adaptive stabilization of quantum circuits executed on unstable devices

Conventional computers have evolved to device components that demonstrate failure rates of 10 −17 or less, while current quantum computing devices typically exhibit error rates of 10 −2 or greater. This raises concerns about the reliability and reproducibility of the results obtained from quantum computers. The problem is highlighted by experimental observation that today’s NISQ devices are inherently unstable. Remote quantum cloud servers typically do not provide users with an ability to calibrate the device themselves. Using inaccurate characterization data for error mitigation can have devastating impact on reproducibility. In this study, we investigate if one can infer the critical channel parameters dynamically from the noisy binary output of the executed quantum circuit and use it to improve program stability. An open question however is how well does this methodology scale. We discuss the efficacy and efficiency of our adaptive algorithm using canonical quantum circuits such as the uniform superposition circuit. Our metric of performance is the Hellinger distance between the post-stabilization observations and the reference (ideal) distribution.

Dasgupta, Samudra↗
DOE OSTI2026

Permafrost Thaw, Uneven Subsidence and Projected Drying of Ice-wedge Polygon Tundra: Modeling Archive

This dataset is a model archive of the paper Permafrost Thaw, Uneven Subsidence and Projected Drying of Ice-wedge Polygon Tundra (in prep) to support a modeling study investigating how projected increases in Arctic temperature and precipitation will jointly influence hydrologic conditions in ice-rich tundra landscapes. With this dataset, this study is to address the research question: Will Arctic tundra landscapes become wetter or drier with increasing precipitation and temperature in the future when thaw-induced ground subsidence and associated microtopographic evolution are represented? The simulations focus on ice-wedge polygon tundra, a widespread form of ice-rich permafrost terrain that is highly sensitive to thaw-driven landscape change. This dataset contains model input and output data for four study watersheds in Alaska: Anaktuvuk, Utqiagvik (formerly Barrow), Brooks Foothills, and Prudhoe Bay. Simulations were performed using the Advanced Terrestrial Simulator (ATS, v1.5), a physics-rich integrated surface–subsurface hydrologic model. For each watershed, ten modeling cases were performed representing two landscape evolution conditions (with subsidence and without subsidence) combined with five climate forcing scenarios derived from Shared Socioeconomic Pathways (SSP5, SSP5 with precipitation trend, SSP2, SSP2 with precipitation trend, and SSP2 with double precipitation trend). Particularly, for each watershed under the forcing SSP2 with precipitation trend, there are two additional simulations considering spatially heterogeneous subsidence distributions: one assumes randomly distributed scaling and the other includes elevation dependent distribution scaling. These simulations span 1980–2099 and include spin-up runs (1980–2009) followed by transient projections (2010–2099). To facilitate reproducibility of simulations, all datasets are organized by watershed. For each study watershed, the dataset contains: (1) Pre-partitioned mesh files for 32-core modeling (.par.32.XX), located in EACH_WATERSHED/mesh/basin; and also a non-partitioned mesh file (.exo) located in EACH_WATERSHED/mesh; (2) Climate forcings corresponding to the five SSP scenarios (.h5), located in EACH_WATERSHED/data; (3) Final states (.h5) from column spin-up modeling used to initialize historical watershed-scale spin-up runs from 1980 to 2009, located in EACH_WATERSHED/PreSpinupHistorical; (4) Final states (.h5) of historical watershed-scale spin-up runs from 1980 to 2009 used to initialize projection runs, located in EACH_WATERSHED/Spinup_daymetERA5; (5) ATS modeling input files (.xml), located in EACH_WATERSHED/EACH_SIMULATION_SCENARIO/inputfiles; (6) ATS modeling output files (.dat), located in in EACH_WATERSHED/EACH_SIMULATION_SCENARIO/combined_obs; (7) For the Brooks Foothills watershed, additional spatial model outputs are provided (.h5) for selected years (2033 and 2093) used to generate spatial figures in this study, located in Brooksfoothills/EACH_SIMULATION_SCENARIO/results-WITH/WITHOUT_SUBSIDENCE-year2033/2093. All data files with suffix .h5 can be accessible through Python h5py, and all data files with suffix of .dat can be imported by Python pandas. Mesh file with .exo can be visualized through Paraview or read by Python netCDF. The Next-Generation Ecosystem Experiments in the Arctic (NGEE Arctic) project is a research effort to reduce uncertainty in the Department of Energy’s Energy Exascale Earth System Model (E3SM) by developing a predictive understanding of Arctic tundra ecosystems underlain by permafrost and to quantify feedbacks from the Arctic tundra to the Earth system. NGEE Arctic is supported by the Department of Energy's Office of Biological and Environmental Research. Over Phases 1–3, observations made by the NGEE Arctic team across a gradient of permafrost landscapes in Arctic Alaska improved the representation of tundra processes in the land surface component of E3SM (the E3SM Land Model, ELM). Model improvements emphasized unique aspects of permafrost environments and explored reductions in model complexity while retaining predictive power. The Arctic-informed ELM developed by NGEE Arctic has been used to make novel predictions on processes ranging from permafrost thaw to soil biogeochemical cycling to Earth system feedbacks associated with the unique characteristics of tundra plants. In Phase 4, the NGEE Arctic team is evaluating our new predictive understanding under novel conditions across the Arctic domain. In collaboration with partners at long-term pan-Arctic research sites we are examining whether an Arctic-informed ELM can faithfully simulate interactions among surface and subsurface processes at site, regional, and pan-Arctic scales. In turn, we are using variety of tools to dynamically extend and evaluate ELM inference, with an emphasis on data synthesis and pan-Arctic model evaluation, reintegration of code with an evolving E3SM, scaling across heterogeneous Arctic landscapes, and the appropriate representation of the impacts of increasingly frequent Arctic disturbances.

EARTH SCIENCE > ATMOSPHERE > PRECIPITATION↗
DOE OSTI2026

Multi-resolution Arctic Shrub Cover Dataset Derived from UAS and Airborne SfM and LiDAR (2013-2025)

We synthesized 177 unoccupied aerial system flights and 77 airborne flights across the Arctic and created a multi-resolution benchmark data of low-to-tall shrub fractional cover leveraging Structure-from-Motion and Light Detection and Ranging. The resulting dataset covered a total of 1899 km2 across Alaska, Western Canada, Sweden, and Siberian Arctic, including key sites from the Oro Arctic to the High Arctic. The dataset is organized into 6 primary data collection directories (“Abisko,” “AWI,” “ERE,” “Fairbanks,” “NGEE,” “Toolik”), each containing site and flight subdirectories. Flight directories include shrub cover rasters (*.tifs) at 1 m, 5 m, and 30 m resolution, the canopy height model at 1 m resolution (*.tifs), and a bounding box *.kml file. For the AWI, Abisko, NGEE, and Fairbanks collections, we also include the GCC raster at 1 m resolution (*.tif). Files are organized by Collection > Site > Flight Name > Data Files. Flight rasters are in the local UTM zone and the .kml files are in the geographic coordinate system EPSG 4326. We also include a .csv file that details the source datasets for every flight. The Next-Generation Ecosystem Experiments in the Arctic (NGEE Arctic) project is a research effort to reduce uncertainty in the Department of Energy’s Energy Exascale Earth System Model (E3SM) by developing a predictive understanding of Arctic tundra ecosystems underlain by permafrost and to quantify feedbacks from the Arctic tundra to the Earth system. NGEE Arctic is supported by the Department of Energy's Office of Biological and Environmental Research. Over Phases 1–3, observations made by the NGEE Arctic team across a gradient of permafrost landscapes in Arctic Alaska improved the representation of tundra processes in the land surface component of E3SM (the E3SM Land Model, ELM). Model improvements emphasized unique aspects of permafrost environments and explored reductions in model complexity while retaining predictive power. The Arctic-informed ELM developed by NGEE Arctic has been used to make novel predictions on processes ranging from permafrost thaw to soil biogeochemical cycling to Earth system feedbacks associated with the unique characteristics of tundra plants. In Phase 4, the NGEE Arctic team is evaluating our new predictive understanding under novel conditions across the Arctic domain. In collaboration with partners at long-term pan-Arctic research sites we are examining whether an Arctic-informed ELM can faithfully simulate interactions among surface and subsurface processes at site, regional, and pan-Arctic scales. In turn, we are using variety of tools to dynamically extend and evaluate ELM inference, with an emphasis on data synthesis and pan-Arctic model evaluation, reintegration of code with an evolving E3SM, scaling across heterogeneous Arctic landscapes, and the appropriate representation of the impacts of increasingly frequent Arctic disturbances.

canopy height model↗
DOE OSTI2020

Evaporation Induced Entrainment of Contaminants from Evaporating and Burning Liquids.

This interim report details model development, theory, and a literature review focusing on the evaporation induced entrainment (sub-boiling) of contaminated liquids. Entrainment from a variety of sources is the topic of DOE Handbook 3010, and this report deals more broadly with fire related airborne sources of contaminants in hazardous operations. Relatively few studies have examined sub-boiling behavior in the past, however, it can be a phenomenon that presents a fire related risk under hazardous operations. Molecular dynamics simulations are used to infer the gaseous evolution of coordinated complexes, and a model for a water/plutonium/nitrate system is deduced from the simulation results by evaluating the statistical trends of the results. Questions remain as to the chemical reactivity and longevity of entrained species. A generalized computer model capability and simple analytical model assumptions are developed for predicting the results of these and other (boiling and solid entrainment) scenarios. Verification related predictions using these models are illustrated.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Analytically Derived Piezoelectric Ejecta Data Transformations, with Implications for Claims of Experimentally Observed Self-Similarity

Building upon a previously documented analytic formalism, we derive a set of data transformations that relate piezoelectrically inferred time-dependent ejecta masses, dynamical ejecta cloud densities, and "radiographic" ejecta cloud density distributions. These transformation rules are derived rigorously, with careful attention to the assumption of instant ejecta production which is inherent in the piezoelectric mass inference procedure. Some of these relationships have not appeared previously in the literature, including solutions for the unique ejecta velocity distribution and radiographic ejecta cloud density distribution consistent with the instant-production assumption for a given piezoelectrically inferred mass dataset. In deriving the latter, we prove that—again subject to the ubiquitous instant-creation assumption—measurements at a single sensor are sufficient to determine properties of the ejecta cloud everywhere at all times. Other data transformation relationships have appeared in the literature without a rigorous derivation, or have been stated in forms that obscure the key mathematical relationships. We apply these results to arguments for self-similar ejecta cloud evolution, thereby deriving mathematical expressions by which claims of self-similarity may be examined. We prove that one analysis used in the literature to claim experimental evidence of a short ejecta production timescale—and consequently of self-similar cloud evolution—in fact places no constraint the ejecta production interval and therefore does not support the associated conclusion. We also provide a potentially useful uniqueness proof.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2023

A greedy Galerkin method to efficiently select sensors for linear dynamical systems

A key challenge in inverse problems is the selection of sensors to gather the most effective data. In this paper, we consider the problem of inferring the initial condition to a linear dynamical system and develop an efficient control-theoretical approach for greedily selecting sensors. Our method employs a Galerkin projection to reduce the size of the inverse problem, resulting in a computationally efficient algorithm for sensor selection. As a byproduct of our algorithm, we obtain a preconditioner for the inverse problem that enables the rapid recovery of the initial condition. Here, we analyze the theoretical performance of our greedy sensor selection algorithm as well as the performance of the associated preconditioner. Finally, we verify our theoretical results on various inverse problems involving partial differential equations.

97 MATHEMATICS AND COMPUTING↗