Search NASA⌕ Search

SEARCH · Search NASA

Results for “electrode/electrolyte interface”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Three-dimensional electronic resistivity mapping of solid electrolyte interphase on Si anode materials

Silicon is a promising candidate for the lithium ion battery (LIB) anode because of the order-of-magnitude improvement in capacity over current state-of-the-art graphite anodes. In systems featuring both C and Si anodes, electronic resistivity of the solid-electrolyte interphase (SEI) layer is a critical factor for preventing continuous electrolyte-decomposition reactions at the electrode/electrolyte interface. However, the in-situ measurement of SEI electronic resistance has been complicated by ion transport and electronic contributions from other parts of the battery circuit. Ex-situ measurements of SEI resistivity at microscopic scales are also lacking. We report on a nanometer-resolution three-dimensional technique that enables ex-situ mapping of electronic resistivity of SEI formed on a model single-crystalline wafer Si anode. Our novel experimental approach uses scanning spreading-resistance microscopy resistance imaging and mechanical depth profiling. In addition to resistance mapping, this method also provides an alternative technique for locating buried interfaces, where mechanical or electronic properties differ sufficiently between layers. Further validation of this method was obtained by resistance mapping of a reference sample with a designed a-Si:H layer stack of different doping concentrations. The results show relatively uniform lateral resistivity distribution of the SEIs but steep decreases in resistivity in the vertical direction. Resistivity vs. depth profiles are highly dependent on cycling conditions, but they generally show a resistivity decrease from the most superficial levels of SEI and a thickness increase with continued cycling prior to SEI stabilization. The most prominent resistivity increase was observed on SEI formed in Gen2 electrolyte (EC:EMC [3:7 by wt.] + 1.2 M LiPF6) with 10 wt% fluoroethylene carbonate additive; this result may partially explain the significant improvements of sustained electrochemical cycling and coulombic efficiency observed with this electrolyte additive. Our approach provides a novel and unparalleled three-dimensional approach in characterizing electronic resistivity, which contributes significantly to understanding SEI formation and the intrinsic properties critical to battery performance.

25 ENERGY STORAGE↗

Photoelectrochemical performances of n-CdS{sub 1-x}Se{sub x} thin films prepared by spray pyrolysis technique

The CdS{sub 1-x}Se{sub x} (0.0 {<=} x {<=} 1.0) thin films of various compositions have been deposited onto the amorphous and FTO coated glass substrates using a spray pyrolysis technique. An electrode/electrolyte interface has been formed between an n-type CdS{sub 1-x}Se{sub x} (0.0 {<=} x {<=} 1.0) alloyed/mixed type semiconductor and a sulphide/polysulphide redox electrolyte and investigated through the current-voltage, capacitance-voltage and photovoltaic power output characteristics. The dependence of the dark current through the junction and the junction capacitance on the voltage across the junction have been examined and analysed. Upon illumination of the interface with a light of 20 mW/cm{sup 2}, an open-circuit voltage of the order of 335 mV and a short-circuit current of 1.02 mA/cm{sup 2} have been developed (for x = 0.8), which results in energy conversion efficiency and fill factor 0.79% and 0.46% respectively. The magnitudes of the barrier heights at the interfaces have been determined. The significant electrochemical properties have been observed for a cell with electrode composition x = 0.8. (author)

14 SOLAR ENERGY↗

Novel hydrophobic ionic liquids electrolyte based on cyclic sulfonium used in dye-sensitized solar cells

A novel series of hydrophobic room temperature ionic liquids based on six cyclic sulfonium cations were first time synthesized and applied in dye-sensitized solar cells as pure solvents for electrolyte system. The chronoamperograms result showed that the length of substituent on sulfonium cations could inhibit the I{sub 3}{sup -} diffusion and the five-ring structure of sulfonium was benefit for fast triiodide ion diffusion. The electrochemical impendence spectra measurement of dye-sensitized solar cells with these ionic liquid electrolytes was carried out and the result indicated that the cations' structure had indeed influence on the cells' performance especially for the fill factor, which was further proved by the measurement result of I-V curves of these dye-sensitized solar cells. The conclusion was obtained that the electron exchange reaction on Pt counter electrode/electrolyte interface dominated the cells' performance for these ionic liquid electrolyte-based DSCs. (author)

14 SOLAR ENERGY↗

A Mössbauer spectral study of degradation in La 0.58 Sr 0.4 Fe 0.5 Co 0.5 O 3–x after long-term operation in solid oxide electrolysis cells

Here, degradation processes of oxygen electrodes in solid oxide electrolysis cells (SOECs) were studied by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and Mössbauer spectroscopy. La 0.58 Sr 0.4 Fe 0.5 Co 0.5 O 3–x (LSCF) anodes (oxygen electrode) were analyzed after different long-term operations durations of 1774, 6100 and 9000 h. The results were compared with a cell in the initial state. Besides the LSCF anode, the SOECs were composed of a Ce 0.8 Gd 0.2 O 1.9 barrier layer between the anode and electrolyte, yttria-stabilized zirconia (YSZ) as electrolyte and Ni-YSZ as cathode (hydrogen electrode). Mössbauer spectra of the iron-containing anode were acquired in order to determine the alteration of the iron oxidation state and its local environment during operation. Mössbauer spectroscopy yields indirect information about the degradation mechanism, especially in combination with SEM, TEM, and XRD. XRD and TEM revealed the appearance of Co 3 O 4 during the SOEC operation and SEM analyses confirmed the formation of SrZrO 3 at the electrode/electrolyte interface. The spectral analysis confirmed the reduction of iron from Fe(IV) to Fe(III) in LSCF after long-term operation. The fraction of Fe(IV) in the electrode decreased with time and 18, 15, 13 and 11% were obtained for 0, 1774, 6100, and 9000 h of operation, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Direct Visualization of Solid Electrolyte Interphase Formation in Lithium-Ion Batteries with In Situ Electrochemical Transmission Electron Microscopy

Complex, electrochemically driven transport processes form the basis of electrochemical energy storage devices. The direct imaging of electrochemical processes at high spatial resolution and within their native liquid electrolyte would significantly enhance our understanding of device functionality, but has remained elusive. In this work we use a recently developed liquid cell for in situ electrochemical transmission electron microscopy to obtain insight into the electrolyte decomposition mechanisms and kinetics in lithium-ion (Li-ion) batteries by characterizing the dynamics of solid electrolyte interphase (SEI) formation and evolution. Here we are able to visualize the detailed structure of the SEI that forms locally at the electrode/electrolyte interface during lithium intercalation into natural graphite from an organic Li-ion battery electrolyte. We quantify the SEI growth kinetics and observe the dynamic self-healing nature of the SEI with changes in cell potential.

25 ENERGY STORAGE↗

Bipolar Membranes for Ion Management in (Photo)Electrochemical Energy Conversion

Conspectus (Photo)electrochemical energy conversion is important in the development of a carbon-neutral energy economy because it can provide a pathway for mitigating the intermittency of renewable energy sources such as wind and solar. In order to operate efficiently, these technologies, which include photoelectrochemical cells, water and CO 2 electrolyzers, fuel cells, and redox flow batteries, require fast charge transfer kinetics at the electrode/electrolyte interface as well as robust ion management in the electrolyte. In conventional electrolyzers and fuel cells, the electrolyte is strongly acidic or basic and ionic current is carried by H + or OH – ions. In contrast, photoelectrodes and electrocatalysts for water splitting are often studied in buffered solutions. The question of ion balance in these systems led us to analyze the polarization losses due to ion concentration gradients in cells that employed various buffer–membrane combinations. Continuously driving the buffer ions across an ionomer membrane not only lowers the buffer capacity of an aqueous electrolyte but also introduces pH gradients that result in significant energy losses. To address the problem, we and other groups have studied the use of reverse-biased bipolar membranes (BPMs) in (photo)electrolytic cells. BPMs consist of an anion exchange layer (AEL) laminated with a cation exchange layer (CEL) and are usually equipped with a catalytic layer in between to accelerate the water dissociation reaction. At the AEL/CEL interface, water dissociates into protons and hydroxide ions, which replenish those consumed at the cathode and anode. Compared to conventional water electrolyzers with proton/anion exchange membranes (PEM/AEM), BPM electrolyzers provide the unique advantage of continuously operating the cathode and anode under different pH conditions, which is desirable when the two electrode reactions have different pH requirements. BPMs also enable the use of buffered electrolytes at pH values that are optimized for electrode stability and product selectivity in applications such as CO 2 electrolysis. Product crossover losses and CO 2 pumping can be dramatically reduced in BPM-based CO 2 electrolyzers, relative to conventional alkaline membranes, by electrostatic repulsion (of anionic products) and electroosmotic drag (for neutral products). BPM-based gas fed CO 2 electrolyzers can achieve high current density, but they suffer from low Faradaic efficiency (FE) due to the acidic local environment of the CEL. This problem can be mitigated by adding an aqueous buffering layer or by creating a weak acid cation exchange film on the CEL face of the membrane. The use of BPMs in fuel cells and redox flow batteries offers some interesting advantages. Configurations with both reverse and forward bias have been studied, but forward bias has been favored due to material compatibility, reaction kinetics, and thermodynamic considerations. The net reaction at the AEL/CEL interface is the acid–base neutralization reaction, which has a high inherent reaction rate constant, but in the BPM is limited to a nanometric space-charge layer and requires efficient catalysis to achieve high current density. Understanding the mechanism of the acid–base neutralization and the opposite process, the water dissociation reaction, will be essential for improving the performance of forward-biased BPMs. In conclusion, this Account reviews our current understanding of the working mechanisms of BPMs and discusses how we can use them to effectively manage ions for various (photo)electrochemical applications.

Yan, Zhifei↗

Monitoring SEIRAS on a Graphitic Electrode for Surface-Sensitive Electrochemistry: Real-Time Electrografting

The ubiquity of graphitic materials in electrochemistry makes it highly desirable to probe their interfacial behavior under electrochemical control. Probing the dynamics of molecules at the electrode/electrolyte interface is possible through spectroelectrochemical approaches involving surface-enhanced infrared absorption spectroscopy (SEIRAS). Usually, this technique can only be done on plasmonic metals such as gold or carbon nanoribbons, but a more convenient substrate for carbon electrochemical studies is needed. Here, we expanded the scope of SEIRAS by introducing a robust hybrid graphene-on-gold substrate, where we monitored electrografting processes occurring at the graphene/electrolyte interface. These electrodes consist of graphene deposited onto a roughened gold-sputtered internal reflection element (IRE) for attenuated total reflectance (ATR) SEIRAS. The capabilities of the graphene-gold IRE were demonstrated by successfully monitoring the electrografting of 4-amino-2,2,6,6-tetramethyl-1-piperidine N -oxyl (4-amino-TEMPO) and 4-nitrobenzene diazonium (4-NBD) in real time. These grafts were characterized using cyclic voltammetry and ATR-SEIRAS, clearly showing the 1520 and 1350 cm –1 NO 2 stretches for 4-NBD and the 1240 cm –1 C–C, C–C–H, and N–Ȯ stretch for 4-amino-TEMPO. Successful grafts on graphene did not show the SEIRAS effect, while grafting on gold was not stable for TEMPO and had poorer resolution than on graphene-gold for 4-NBD, highlighting the uniqueness of our approach. The graphene-gold IRE is proficient at resolving the spectral responses of redox transformations, unambiguously demonstrating the real-time detection of surface processes on a graphitic electrode. This work provides ample future directions for real-time spectroelectrochemical investigations of carbon electrodes used for sensing, energy storage, electrocatalysis, and environmental applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrogen-Induced Degradation of NaMnO 2

We show that the presence of hydrogen causes irreversible degradation of α- NaMnO 2 when used as the cathode in Na-ion batteries. Using density functional theory, we investigate the removal of Mn from the MnO 2 layers. Under hydrogen-free conditions, we find that the removal of Mn is suppressed since forming a Mn vacancy in the MnO 2 layer requires a large energy. In the presence of hydrogen, however, the vacancy is stabilized by forming hydrogenated complexes. The resulting lowering of the Mn migration barrier (to 0.2 eV) allows Mn to move to the interlayer spacing. From there, Mn can easily migrate to the electrode/electrolyte interface, leading to dissolution. Lastly, our calculations indicate that the oxidation state of Mn in the interlayer is 2+. Avoiding the presence of hydrogen is therefore crucial to obtain high-performing cathodes without capacity loss

25 ENERGY STORAGE↗

Elucidating Interfacial Phenomena between Solid-State Electrolytes and the Sulfur-Cathode of Lithium–Sulfur Batteries

Sulfide solid-state electrolytes are promising materials to be used in Li–S batteries because they have the potential to mitigate some of the challenges currently faced by this technology such as the dissolution of polysulfide species and the flammability of conventional organic-based electrolytes. Nevertheless, the electrode/electrolyte interfaces are not well-understood yet. In this study, we use density functional theory and ab initio molecular dynamics simulations to investigate the formation of the cathode–electrolyte interface at two limiting states of charge: S 8 and Li 2 S. β-Li 3 PS 4 and two lithium halide-doped sulfides (Li 6 PS 5 Cl and Li 7 P 2 S8I) were selected because of their Li-ion superionic conductivity and compatibility with sulfur electrodes. The work of adhesion and interfacial energy of the interfaces were calculated as descriptors of the interfacial properties, and then the mechanisms of the interfacial reactions taking place were characterized. Lastly, a charge transfer analysis is presented, suggesting that, overall, the S 8 electrode will oxidize the electrolyte, whereas the fully discharged Li 2 S cathode will reduce it at different extents depending on the reactivity of the exposed facet.

25 ENERGY STORAGE↗

A Generic Model for Electric Double Layers in Porous Electrodes

The performance of electric-double-layer capacitors (EDLCs) hinges on microscopic charge distributions near the electrode/electrolyte interfaces. Whereas practical EDLCs consist of electrodes made of amorphous porous materials, theoretical understanding of EDLCs is mostly based on EDL structure near a planar surface or on simplistic models that have little relevance to realistic systems. In this work, we propose a spherical shell model to account for both pore size and curvature effects of amorphous porous materials. The EDL structure in spherical shells has been investigated over a broad range of pore sizes and curvatures by use of classic density functional theory. Theoretical results reveal that the curvature effects on convex and concave EDLs are drastically different and that materials with extensive convex surfaces will lead to maximized capacitance. Like a slit pore, the spherical shell model also predicts oscillatory variation of capacitance with pore size, but the oscillatory behavior is magnified as the curvature increases. The joint effects of pore size and curvature identified in this work give new insight into materials design for porous electrodes with optimal EDLC performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mechanistic Insights into Surface Chemical Interactions between Lithium Polysulfides and Transition Metal Oxides

The design and development of materials for electrochemical energy storage and conversion devices requires fundamental understanding of chemical interactions at electrode/electrolyte interfaces. For Li–S batteries that hold the promise for outperforming the current generation of Li ion batteries, the interactions of lithium polysulfide (LPS) intermediates with the electrode surface strongly influence the efficiency and cycle life of the sulfur cathode. While metal oxides have been demonstrated to be useful in trapping LPS, the actual binding modes of LPS on 3d transition metal oxides and their dependence on the metal element identity across the periodic table remain poorly understood. Here, we investigate the chemical interactions between LPS and oxides of Mn, Fe, Co, and Cu by combining X-ray photoelectron spectroscopy and density functional theory calculations. We believe that Li–O interactions dominate LPS binding to the oxides (Mn 3 O 4 , Fe 2 O 3 , and Co 3 O 4 ), with increasing strength from Mn to Fe to Co. For Co 3 O 4 , LPS binding also involves metal–sulfur interactions. Moreover, we find that the metal oxides exhibit different binding preferences for different LPS, with Co 3 O 4 binding shorter-chain LPS more strongly than Mn 3 O 4 . In contrast to the other oxides, CuO undergoes intense reduction and dissolution reactions upon interaction with LPS. The reported findings are thus particularly relevant to the design of LPS/oxide interfaces for high-performance Li–S batteries.

25 ENERGY STORAGE↗

Contribution of dielectric screening to the total capacitance of few-layer graphene electrodes

We apply joint density functional theory (JDFT), which treats the electrode/electrolyte interface self-consistently, to an electric double-layer capacitor (EDLC) based on few-layer graphene electrodes. The JDFT approach allows us to quantify a third contribution to the total capacitance beyond quantum capacitance (C Q ) and EDL capacitance (C EDL ). This contribution arises from the dielectric screening of the electric field by the surface of the few-layer graphene electrode, and we therefore term it the dielectric capacitance (C Dielec ). We find that C Dielec becomes significant in affecting the total capacitance when the number of graphene layers in the electrode is more than three. In conclusion, our investigation sheds new light on the significance of the electrode dielectric screening on the capacitance of few-layer graphene electrodes.

36 MATERIALS SCIENCE↗

Roll-To-Roll Atomic Layer Deposition of Titania Nanocoating on Thermally Stabilizing Lithium Nickel Cobalt Manganese Oxide Cathodes for Lithium Ion Batteries

Conformal coating of ceramic layers (nm-thick) on Ni-rich layered cathode materials is an effective strategy for improving high-temperature longevity of Li-ion batteries (LIBs). In this work, we develop a roll-to-roll atomic layer deposition (R2R ALD) apparatus for growing uniform nanolayers of TiO 2 . We explore the effect of ALD parameters (temperature: 120–180 °C and line speed: 2–40 mm s –1 ) on the TiO 2 surface coating and subsequently investigate the electrochemical performance of the as-prepared cathodes. The capacity retention of TiO 2 -coated porous electrodes is substantially improved compared to that of the pristine cathode material for high-temperature cycling. Electrochemical impedance spectroscopy confirms that the ALD-TiO 2 coating suppresses the undesired side reactions initiated at the electrode/electrolyte interface, reduces charge transfer resistance, and ultimately facilitates the Li + transport through the composite cathode nanostructure. The robust design of the ALD-TiO 2 cathode material enables high-temperature operation (>55 °C) with enhanced specific capacity, superior rate capability, excellent cyclability, and ultra-high coulombic efficiency within a wide potential window (3.0–4.35 V). Furthermore, the R2R ALD technique developed in this work paves the way for large-scale fabrication of ceramic-coated cathode sheets with a production rate reaching 2.4 m min –1 for a continuous coating operation.

25 ENERGY STORAGE↗

Effective Electrochemical Charge Storage in the High-Lithium Compound Li8ZrO6

Li8ZrO6 is a pseudolamellar compound with high lithium content. Even though it is intrinsically a poor conductor and does not contain a transition metal with easily variable oxidation states, a new synthetic approach to preparing it in nanocomposite form with intimate contact to a conductive carbon by mechanical delamination enabled galvanostatic cycling of coin half-cells containing Li8ZrO6/C as the cathode and Li-metal as the anode at 221 mAh/g (which corresponds to extracting 2 Li per formula unit) over at least 140 cycles. With a higher capacity limit, a discharge capacity of 331 mAh/g (which corresponds to extracting 3 Li per formula unit) was maintained over 15–20 cycles. Ex-situ and operando X-ray diffraction (XRD) studies of galvanostatically cycled cells showed that at these levels of charge, delithiation follows a reversible, topotactic path with only small distortions around Zr atoms. During this process, crystalline grain sizes decrease continuously, shortening diffusion lengths within grains but increasing the number of grain boundaries and electrode/electrolyte interfaces. Charge storage in Li8ZrO6 appears to involve partial oxidation of oxygen atoms and production of small-polaron holes, as supported by XRD, X-ray photoelectron spectroscopy, and pair-distribution function studies and predicted by quantum mechanical calculations. At higher depths of charge, delithiation results in amorphization of the active electrode material. The charge storage mechanism in Li8ZrO6 is unusual among lithium-ion battery electrode materials and involves a combination of mechanisms that resemble intercalation and conversion reactions. With further refinement, Li8ZrO6/C based materials open up opportunities to develop new cathode materials for lithium-ion batteries that may improve on currently existing capacity barriers.

Li diffusion↗

Effect of Fluoroethylene Carbonate Additives on the Initial Formation of the Solid Electrolyte Interphase on an Oxygen-Functionalized Graphitic Anode in Lithium-Ion Batteries

The formation of a solid electrolyte interphase (SEI) at the electrode/electrolyte interface substantially affects the stability and lifetime of lithium-ion batteries (LIBs). One of the methods to improve the lifetime of LIBs is by the inclusion of additive molecules to stabilize the SEI. To understand the effect of additive molecules on the initial stage of SEI formation, in this work we compare the decomposition and oligomerization reactions of a fluoroethylene carbonate (FEC) additive on a range of oxygen-functionalized graphitic anodes to those of an ethylene carbonate (EC) organic electrolyte. A series of density functional theory (DFT) calculations augmented by ab initio molecular dynamics (AIMD) simulations reveal that EC decomposition on an oxygen-functionalized graphitic ($11\bar{2}0$) edge facet through a nucleophilic attack on an ethylene carbon site (C E ) of an EC molecule (S2 mechanism) is spontaneous during the initial charging process of LIBs. However, decomposition of EC through a nucleophilic attack on a carbonyl carbon (C C ) site (S1 mechanism) results in alkoxide species regeneration that is responsible for continual oligomerization along the graphitic surface. In contrast, FEC prefers to decompose through an S1 pathway, which does not promote alkoxide regeneration. Including FEC as an additive is thus able to suppress alkoxide regeneration and results in a smaller and thinner SEI layer that is more flexible toward lithium intercalation during the charging/discharging process. In addition, we find that the presence of different oxygen functional groups at the surface of graphite dictates the oligomerization products and the LiF formation mechanism in the SEI.

25 ENERGY STORAGE↗

Critical Contribution of Imbalanced Charge Loss to Performance Deterioration of Si-Based Lithium-Ion Cells during Calendar Aging

Increasing the energy density of lithium-ion batteries, and thereby reducing costs, is a major target for industry and academic research. One of the best opportunities is to replace the traditional graphite anode with a high-capacity anode material, such as silicon. However, Si-based lithium-ion batteries have been widely reported to suffer from a limited calendar life for automobile applications. Heretofore, there lacks a fundamental understanding of calendar aging for rationally developing mitigation strategies. Both open-circuit voltage and voltage-hold aging protocols were utilized to characterize the aging behavior of Si-based cells. Particularly, a high-precision leakage current measurement was applied to quantitatively measure the rate of parasitic reactions at the electrode/electrolyte interface. The rate of parasitic reactions at the Si anode was found 5 times and 15 times faster than those of LiNi 0.8 Mn 0.1 Co 0.1 O 2 and LiFePO 4 cathodes, respectively. Here, the imbalanced charge loss from parasitic reactions plays a critical role in exacerbating performance deterioration. In addition, a linear relationship between capacity loss and charge consumption from parasitic reactions provides fundamental support to assess calendar life through voltage-hold tests. These new findings imply that longer calendar life can be achieved by suppressing parasitic reactions at the Si anode to balance charge consumption during calendar aging.

25 ENERGY STORAGE↗

Overall Water Splitting with Room-Temperature Synthesized NiFe Oxyfluoride Nanoporous Films

Freestanding and lightweight thin-films were rationally designed to serve as robust electrodes for renewable energy applications. A facile and scalable nanomanufacturing process was developed to fabricate these transformative thin-film electrodes (iron group mixed oxides) that exhibit a nanoporous structure and controllable composition. More specifically, electrodeposition and anodic treatments were employed to produce freestanding and lightweight metal oxides nanoporous layers (NPL). These NPL can be directly used as flexible and additive-free electrodes for renewable energy generation (water splitting) and storage (supercapacitor) applications without requiring binders and current collector and other additives. Significantly enhanced electrochemical performance was achieved due to the unique merits of the NPL: i) highly porous structure considerably increases the electrode/electrolyte interface, which facilitate electrochemical reactions; ii) NPL substantially increase the number of active sites that are favorable in electrochemical reactions; iii) residual metal network within the NPL forms a conductive framework, drastically improving electrode strength, flexibility and conductivity.

36 MATERIALS SCIENCE↗

Beyond Local Solvation Structure: Nanometric Aggregates in Battery Electrolytes and their Effect on Electrolyte Properties

Electrolytes are an essential component of all electrochemical storage and conversion devices, such as batteries. In the history of battery development, the complex nature of electrolytes has often been a bottleneck. Fundamental knowledge of electrolyte systems encompasses elucidation of structure-property relationships of the solution species. Recently, nanometric aggregates have been observed in several classes of electrolytes, including super-concentrated, redox-flow, multivalent, polymer, and ionic liquid-based electrolytes. Compared with the well-studied local solvation structures such as contact ion pairs and solvent-separated ions, these aggregates impose unique effects on the ion distribution and transport both within bulk electrolytes and at electrode/electrolyte interfaces. This Perspective highlights the discovery of the aggregates in various battery electrolytes and their impact on electrolyte properties. We also present an outlook for future studies of this emerging field of nanometric aggregates and the need for the development of new experimental and computational tools to study their properties.

Yu, Zhou↗