Search NASA⌕ Search

SEARCH · Search NASA

Results for “electrolyte structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Standalone sulfide based lithium ion-conducting glass solid electrolyte and associated structures, cells and methods

A standalone lithium ion-conductive solid electrolyte including a freestanding inorganic vitreous sheet of sulfide-based lithium ion conducting glass is capable of high performance in a lithium metal battery by providing a high degree of lithium ion conductivity while being highly resistant to the initiation and/or propagation of lithium dendrites. Such an electrolyte is also itself manufacturable, and readily adaptable for battery cell and cell component manufacture, in a cost-effective, scalable manner.

Visco, Steven J.↗

Solid Electrolyte Bimodal Grain Structures for Improved Cycling Performance

Here, the application of solid-state electrolytes in Li batteries is hampered by the occurrence of Li-dendrite-caused short circuits. To avoid cell failure, the electrolytes can only be stressed with rather low current densities, severely restricting their performance. As grain size and pore distributions significantly affect dendrite growth in ceramic electrolytes such as Li 7 La 3 Zr 2 O 12 and its variants; here, a “detour and buffer” strategy to bring the superiority of both coarse and fine grains into play, is proposed. To validate the mechanism, a coarse/fine bimodal grain microstructure is obtained by seeding unpulverized large particles in the green body. The rearrangement of coarse grains and fine pores is fine-tuned by changing the ratio of pulverized and unpulverized powders. The optimized bimodal microstructure, obtained when the two powders are equally mixed, allows, without extra interface decoration, cycling for over 2000 h as the current density is increased from 1.0 mA·cm -2 , and gradually, up to 2.0 mA·cm -2 . The “detour and buffer” effects are confirmed from postmortem analysis. The complex grain boundaries formed by fine grains discourage the direct infiltration of Li. Simultaneously, the coarse grains further increase the tortuosity of the Li path. This study sheds light on the microstructure optimization for the polycrystalline solid-state electrolytes.

25 ENERGY STORAGE↗

Structure–Activity Relationships in Ether-Functionalized Solid-State Metal–Organic Framework Electrolytes

The structure–property relationships of metal–organic framework (MOF)-based solid-state electrolytes are not well understood. Herein, a systematic investigation of 12 Zr(IV)-based UiO-66 MOFs with varying ether-chain functional groups was carried out to elucidate the critical microscopic interactions that facilitate improved solid-state electrolyte performance. Enhanced sampling molecular dynamics (MD) simulations were employed and revealed a three-tier ion hopping mechanism: linker–linker hopping, linker-counterion hopping, and counterion-counterion hopping. Detailed structural analysis of the MD trajectories revealed that the chemistry and morphology of the linker groups affect the relative stability and population distribution of the electrolyte components, such that crown-ether-based linker groups enhance the probability of extended, low-barrier ion percolation pathways. As a result, we were able to tune the ionic conductivities by rationally manipulating the counterion distributions, linker binding strengths, and the configurational entropy (multivariability of the linkers). The resulting performance of these MOF-based solid-state electrolytes was significantly enhanced, with a methoxy-functionalized framework (UiO-66-L1 100 ) achieving high ionic conductivities of 2.32 × 10 –4 S/cm and 2.07 × 10 –3 S/cm at 30 °C and 90 °C, respectively, an order of magnitude greater than other all-solid-state MOF electrolyte systems. The electrolyte stability was evaluated with LiIn|LPSCl|MOF:LiTFSI|LPSCl|LiIn symmetric cells, showing excellent Li plating/stripping processes for over 2 months.

36 MATERIALS SCIENCE↗

Porous matrix structures for alkaline electrolyte fuel cells

A number of advancements have been realized by a continuing research program to develop higher chemically stable porous matrix structures with high bubble pressure (crossover resistance) for use as separators in potassium hydroxide electrolyte fuel cells. More uniform, higher-bubble-pressure asbestos matrices were produced by reconstituting Johns-Manville asbestos paper; Fybex potassium titanate which was found compatible with 42% KOH at 250 F for up to 3000 hr; good agreement was found between bubble pressures predicted by an analytical study and those measured with filtered structures; Teflon-bonded Fybex matrices with bubble pressures greater than 30 psi were obtained by filtering a water slurry of the mixture directly onto fuel cell electrodes; and PBI fibers have satisfactory compatibility with 42% KOH at 250 F.

Vine, R. W.↗

The variation in self-organized anode plasma pattern structure with solution electrolyte type in 1 atm DC glow discharge

Abstract Plasma self-organization on anode surfaces in 1 atm DC glow discharges remains poorly understood. This effort aims to elucidate the nature of self-organization through the experimental study of resulting patterns on liquid anode surfaces with 13 different electrolytes and thus improves our understanding of the underlying physical processes that give rise to self-organization by investigating electrolyte sensitivity. Self-organization pattern formation and behavior were studied as a function of discharge current, solution ionic strength, and their chemical property evaluation. The response of the patterns to variation in these parameters was measured using an imaging camera and optical emission spectroscopy. Observed pattern characteristic length scales for all of the electrolytes were ranged from 2 to 13 mm and typically increased with current over the investigated range of 20–80 mA. Complex self-organized pattern structures not reported to date were also observed. The parameters associated with pattern formation and morphology complexity are discussed and summarized.

Physics↗

Structure, morphology and ionic conductivity of solid polymer electrolyte

Graphical abstract: Two-dimensional atomic force image of pure polyethylene oxide presents a crystallized network of regular spherulites developing spirals and branches of well distributed surface contours. Highlights: {yields} The incorporation of ceria significantly modifies the morphology of polyethylene oxide (PEO)-KI complex. {yields} The ionic conductivity increases by about two orders of magnitude by the addition of ceria nanoparticles. {yields} Ionic conductivity as a function of ceria concentration reveals two maxima. {yields} Grain boundary effect of nanofiller, strong Lewis acid-base interaction between PEO and nanosized ceria, change of conformation of PEO molecule and epitaxial effect of ceria nanoparticles control the ionic conductivity of composite polymer electrolyte. -- Abstract: Polyethylene oxide (PEO) complexed with potassium iodide (KI) is synthesized to investigate the ionic conductivity of alkaline based polymer electrolytes. The structural and morphological characterizations of the nanocomposite polymer electrolytes are performed by X-ray diffractometry (XRD), atomic force microscopy (AFM), differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FTIR) measurements. The ionic conductivity increases with the increase of KI concentration up to about 20 wt.%. The effect of nanosized ceria (CeO{sub 2} {approx} 10 nm) fillers on ionic conductivity in PEO-KI polymer electrolyte is also carried out, keeping PEO to KI wt.% ratio 80:20 and 85:15. The result reveals that the addition of ceria nanoparticles enhances the conductivity by two orders of magnitude. The presence of ceria at the highest concentration induces the same molecular environment within PEO chain as that of undoped PEO. Temperature dependence of ionic conductivity follows Arrhenius mechanism.

36 MATERIALS SCIENCE↗

Potential of Zero Charge and Its Temperature Derivative for Au(111) Electrode|Alkanethiol SAM|1.0 M Aqueous Electrolyte Solution Interfaces: Impact of Electrolyte Solution Ionic Strength and Its Effect on the Structure of the Modified Electrode|Electrolyte Solution Interface

In this study, we demonstrate how small and rapid temperature perturbations (produced by the indirect laser-induced temperature jump (ILIT) technique) of solid metal electrode|electrolyte solution interfaces may be used to determine the potential of zero (total) charge (E pzc ) and its temperature derivative $$\left(\frac{dEpzc}{dT}\right)$$ of Au(111) electrode surfaces modified by alkanethiol self-assembled monolayers in contact with high ionic strength (i.e., 1.0 M) aqueous electrolyte solutions. The E pzc ’s measured for two different types of SAMs (made from either HS(CH 2 ) n-1 CH 3 (5 ≤ n ≤ 12, E pzc = -(0.99 ± 0.12) V vs SSCE) or HS(CH 2 ) n OH (3 ≤ n ≤ 16, E pzc = (0.46 ± 0.22) V vs SSCE)) are considerably different than those measured previously at much lower electrolyte solution ionic strengths. For mixed monolayers made from both HS(CH 2 ) n-1 CH 3 and HS(CH 2 ) n Fc (where Fc refers to ferrocene), the difference in Epzc decreases as a function of the surface concentration of the Fc moiety (i.e., [Fc]), and it completely disappears at a surprisingly small [Fc] (~4.0 × 10 –11 mol cm –2 ). These observations for the Au(111)|hydrophobic (neat and mixed) SAM|aqueous electrolyte solution interfaces, along with the surface potentials (g S ml(dip)) evaluated for the contacting electrolyte solution surfaces of these interfaces, are consistent with a structure for the water molecule components of these surfaces where there is a net orientation of the dipoles of these molecules. Accordingly, the negative (oxygen) ends of these molecules point toward the SAM surface. The positive values of g S ml(dip) evaluated for hydrophilic SAM (e.g., made from HS(CH 2 ) n OH)|aqueous electrolyte solution interfaces) also indicate that the structure of these interfaces is similar to that of the hydrophobic interfaces. However, g S ml(dip) decreases with increasing ionic strength for the hydrophilic interfaces, while it increases with increasing ionic strength for the hydrophobic interfaces. The data (and calculations) reported in the present work and other studies of hydrophobic (and hydrophilic)|aqueous solution interfaces are as yet insufficient to support a complete explanation for the effects of ionic strength observed in the present study. Nevertheless, an analysis based upon the value of $$\left(\frac{dEpzc}{dT}\right)$$ (= (0.51 ± 0.12) mV/K, essentially the same for SAMs made from both HS(CH 2 ) n-1 CH 3 and HS(CH 2 ) n OH), determined in the present study provides a further indication that upon formation of the SAM there is a partial charge transfer of electrons from the relevant gold atoms on the Au(111) surface to the sulfur atoms of the alkanethiols.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Perpendicularly Aligned, Anion Conducting Nanochannels in Block Copolymer Electrolyte Films

Connecting structure and morphology to bulk transport properties, such as ionic conductivity, in nanostructured polymer electrolyte materials is a difficult proposition because of the challenge to precisely and accurately control order and the orientation of the ionic domains in such polymeric films. In this work, poly(styrene-block-2-vinylpyridine) (PSbP2VP) block copolymers were assembled perpendicularly to a substrate surface over large areas through chemical surface modification at the substrate and utilizing a versatile solvent vapor annealing (SVA) technique. After block copolymer assembly, a novel chemical vapor infiltration reaction (CVIR) technique selectively converted the 2-vinylpyridine block to 2-vinyl n-methylpyridinium (NMP+ X-) groups, which are anion charge carriers. The prepared block copolymer electrolytes maintained their orientation and ordered nanostructure upon the selective introduction of ion moieties into the P2VP block and post ion-exchange to other counterion forms (X- = chloride, hydroxide, etc.). The prepared block copolymer electrolyte films demonstrated high chloride ion conductivities, 45 mS cm(-1) at 20 degrees C in deionized water, the highest chloride ion conductivity for anion conducting polymer electrolyte films. Additionally, straight-line lamellae of block copolymer electrolytes were realized using chemoepitaxy and density multiplication. The devised scheme allowed for precise and accurate control of orientation of ionic domains in nanostructured polymer electrolyte films and enables a platform for future studies that examines the relationship between polymer electrolyte structure and ion transport.

Arges, Christopher G.↗

Effect of graphitic anode surface functionalization on the structure and dynamics of electrolytes at the interface

Surface termination on a graphitic surface and the type of electrolytes in lithium-ion batteries (LIBs) play an important part in determining the structure, composition, and thus, the quality of the emergent solid electrolyte interphase. In this paper, we analyze the structure and dynamics of electrolyte molecules in multi-component electrolyte with varying species compositions combinatorially paired with four different graphitic surfaces terminated with hydrogen, hydroxyl, carbonyl, and carboxyl to explore the interplay between surface chemistry and electrolyte dynamics at electrode/electrolyte interfaces. Addition of dimethyl carbonate and fluoroethylene carbonate brought substantial changes in the ethylene carbonate (EC) and LiPF6 surface population density for hydroxyl and carbonyl surfaces. Strong density oscillation and drastic slowing of the dynamics of the electrolyte molecules at the interface are reported for all the systems. While these observations are universal, carboxyl surfaces have the strongest local and long-range effects. Characterization of the average dipole direction at the interface shows strong orientational preferences of ethylene carbonate molecules. EC molecules are preferred to be oriented either almost parallel or perpendicular to the hydroxyl surface, are tilted between parallel and perpendicular with a higher angle of incidence of the dipole vs surface normal on the carbonyl surface than on the hydroxyl surface, and are oriented perpendicularly against the carboxyl surface. These differences highlight the significant effect of graphite surface termination on the dynamics of the electrolytes and provide insight into the complex interplays between electrolyte species and graphite anode in LIBs.

Rustam, Sabiha (ORCID:0000000224248153)↗

25 Mg NMR and Computational Modeling Studies of the Solvation Structures and Molecular Dynamics in Magnesium Based Liquid Electrolytes

There is increasing evidence that the solvation structure of the active components in a liquid electrolyte solution strongly impacts the performance in electrochemical applications. In this work, the nanoscale solvation structures and dynamics of Mg(BH 4 ) 2 and Mg(TFSI) 2 dissolved in diglyme (DGM) at various concentrations and ratios of Mg(BH 4 ) 2 /Mg(TFSI) 2 were investigated using a combination of natural abundance 25 Mg NMR, quantum chemistry calculations of 25 Mg NMR chemical shifts, classical molecular dynamics (MD) calculations, and electrochemical performance tests. By mixing two competing Mg salts, we were able to reduce the strong covalent interactions between Mg 2+ and BH 4 – anions. A small increase is observed in the coordination number of Mg-TFSI and a significant increase in the interaction of Mg 2+ ions with glymes. Through a combination of NMR, DFT and MD simulations, various stable species around 1 nm in size were detected in the mixed salt solution, which play key roles in the enhanced electrochemical performance of the mixed electrolyte. It is established that for the neat Mg(TFSI) 2 in DGM electrolyte at dilute concentrations the TFSI - is fully dissociated from Mg 2+ . At higher concentrations, Mg 2+ and TFSI - are only partially dissociated as contact ion pairs are formed. In contrast, at 0.01 M Mg(BH 4 ) 2 (saturated concentration) in DGM, the first solvation shell of a Mg 2+ ion contains two BH 4 - anions and one DGM molecule, while the second solvation shell consists of five to six DGM molecules. An exchange mechanism between the solvation structures in the combined electrolyte containing both Mg(BH 4 ) 2 and Mg(TFSI) 2 in DGM was found to result in the observation of a single 25 Mg NMR peak. This exchange is responsible for an increase in uncoordinated anions, as well as improved stability and ionic conductivity as compared to single anion solution. Solvent molecule rearrangement and direct Mg-ion exchange between the basic solvation structures are hypothesized as likely reasons for the exchange. We elucidate that the solvent rearrangement is energetically much more favorable than direct Mg-ion hopping and is thus suggested as the dominant exchange mechanism.

Magnesium battery, electrolytes, Mg(BH4)2, Mg(TFSI↗