Experimental study of superconducting hot-electron sensors for SubMM astronomy
The superconductin and noise properties of micron-size hot-electron sensors made from thin Ti film are studied.
bolometers electron-phonon coupling photon counter↗
SEARCH · Search NASA
Results for “electron−phonon coupling”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Kohn anomalies and phonon anharmonicity in iridium
Elemental iridium presents surprising challenges for both inelastic neutron scattering (INS) and theoretical thermal transport calculations due to its high neutron absorption cross-section and strong electron-phonon interactions, respectively. Here, in this study, we overcome these challenges to measure temperature-dependent phonon dispersion curves, compare these with calculations based on density functional theory (DFT), and ultimately examine the electron-phonon limited transport behaviors of this material. Our DFT calculations demonstrate Kohn anomalies, near the 𝐾 point of the iridium Brillouin zone, indicating coupling between electrons and phonons. Strong electron-phonon coupling can compete with anharmonic effects to determine electrical and thermal transport behaviors and make the Kohn anomalies challenging to observe. Nonetheless, our INS measurements map these anomalies and other dispersion features over the Brillouin zone from 100 to 700 K. These measurements also uncover unexpectedly large mode specific Grüneisen parameters obtained from the temperature-dependent phonon energies, highlighting strong anharmonicity in iridium. DFT-based Boltzmann transport calculations demonstrate how anharmonicity and electron-phonon couplings determine electronic and lattice transport behaviors. Furthermore, we correlate the Kohn anomalies with calculated electron-phonon nesting functions, Fermi surfaces, and DFT-derived coupling strengths. This study provides detailed insights into the temperature-dependent mode-resolved lattice dynamics and anharmonicity, transport behavior, and electron-phonon interactions.
DFT↗
Distinctive features of structural evolution and thermodynamic response in wide-bandgap semiconductors driven by intense electronic excitation
Radiation-tolerant material selection requires balancing lattice rigidity, defect dynamics, and electronic stability, as shown by covalent SiC outperforming ionic Ga 2 O 3 and GaN under extreme environments. Responding to intense electronic excitation, irradiation-driven phase segregation (β → δ/κ in Ga 2 O 3 ) and core–shell track (disordered structure in GaN), accompanied by elemental redistribution, contrastingly, exceptional radiation tolerance manifested by comparatively minimal lattice distortion (0.17 % strain variation) was demonstrated in SiC. These differential responses are primarily attributed to two fundamental mechanisms: (i) thermodynamic driving forces governing defect migration and phase separation, and (ii) the synergistic effects of robust covalent bonding composition coupled with efficient defect recombination processes. Here, the stronger electron–phonon (e-ph) coupling in Ga 2 O 3 (4.34 × 1018 W m −3 K −1 ) and GaN (3.55 × 10 18 W m −3 K −1 ) enhances lattice energy deposition, triggering thermal spikes (ΔT ≫ T m ) and structural transition behaviors, whereas weaker e-ph coupling in SiC (3.69 × 10 18 W m −3 K −1 ), relatively high thermodynamic parameters and efficient energy dissipation suppress thermal spikes to maintaining lattice integrity. The photoresponse degradation driven by enhanced radiative recombination is dominant in N-doped SiC, while V-doped systems achieve defect-mediated photoconduction optimization characterized by abrupt current transitions, matching fluorescence yield evolutions, and directly connecting defect engineering to optoelectronic performance.
Intense electronic excitation↗
First-Principles Framework for the Prediction of Intersystem Crossing Rates in Spin Defects: The Role of Electron Correlation
Optically active spin defects in solids are promising platforms for quantum technologies. In this work, we present a first-principles framework to investigate intersystem crossing processes, which represent crucial steps in the optical spin-polarization cycle used to address spin defects. Considering the nitrogen-vacancy center in diamond as a case study, we demonstrate that our framework effectively captures electron correlation effects in the calculation of many-body electronic states and their spin-orbit coupling and electron-phonon interactions, while systematically addressing finite-size effects. We validate our predictions by carrying out measurements of fluorescence lifetimes, finding excellent agreement between theory and experiments. The framework presented here provides a versatile and robust tool for exploring the optical cycle of varied spin defects entirely from first principles.
72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
First-principles electron-phonon interactions and polarons in the parent cuprate La 2 CuO 4
Understanding electronic interactions in high-temperature superconductors is an outstanding challenge. In the widely studied cuprate materials, experimental evidence points to strong electron-phonon ( e -ph) coupling and broad photoemission spectra. Yet, the microscopic origin of this behavior is not fully understood. Here, we study e -ph interactions and polarons in a prototypical parent (undoped) cuprate, La 2 CuO 4 (LCO), by means of first-principles calculations. Leveraging parameter-free Hubbard-corrected density functional theory, we obtain a ground state with the band gap and Cu magnetic moment in nearly exact agreement with experiments. This enables a quantitative characterization of e -ph interactions. Our calculations reveal two classes of longitudinal optical (LO) phonons with strong e -ph coupling to hole states. These modes consist of bond stretching and bond bending in the Cu-O plane as well as vibrations of apical O atoms. The hole spectral functions, obtained with a cumulant method that can capture strong e -ph coupling, exhibit broad quasiparticle peaks with a small spectral weight ( Z ≈ 0.25 ) and pronounced LO-phonon sidebands characteristic of polaron effects. Our calculations predict features observed in photoemission spectra, including a 40-meV peak in the e -ph coupling distribution function not explained by existing models. These results show that the universal strong e -ph coupling found experimentally in doped lanthanum cuprates is also present in the parent compound, and elucidate its microscopic origin. Published by the American Physical Society 2025
Chang, Benjamin K. (ORCID:0000000313049324)↗
Unlikelihood of a phonon mechanism for the high-temperature superconductivity in La 3 Ni 2 O 7
The discovery of ~80 K superconductivity in nickelate La 3 Ni 2 O 7 under pressure has ignited intense interest. Here, we present a comprehensive first-principles study of the electron-phonon (e-ph) coupling in La 3 Ni 2 O 7 and its implications on the observed superconductivity. Our results conclude that the e-ph coupling is too weak (with a coupling constant λ ≲ 0.5) to account for the high T c , albeit interesting many-electron correlation effects exist. While Coulomb interactions (via GW self-energy and Hubbard U) enhance the e-ph coupling strength, electron doping (oxygen vacancies) introduces no major changes. Additionally, different structural phases display varying characteristics near the Fermi level, but do not alter the conclusion. The e-ph coupling landscape of La 3 Ni 2 O 7 is intrinsically different from that of infinite-layer nickelates. These findings suggest that a phonon-mediated mechanism is unlikely to be responsible for the observed superconductivity in La 3 Ni 2 O 7 , pointing instead to an unconventional nature.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Understanding polaronic transport in complex oxides by combining precise synthesis and first-principles many-body theory
In complex oxides, charge carriers often couple strongly with lattice vibrations to form polarons–entangled electron–phonon quasiparticles whose transport properties remain difficult to characterize. Experimental access to intrinsic polaronic transport requires ultraclean samples, while theoretical description demands methods beyond low-order perturbation theory. Here, we show a predictive theory–experiment workflow to study polaron transport in complex oxides. Focusing on a prototypical polaronic oxide, anatase TiO 2 , we combine growth of high-quality oxygen-vacancy-doped films using hybrid molecular beam epitaxy with a first-principles electron–phonon diagrammatic Monte-Carlo (FEP-DMC) framework recently developed for accurate polaron predictions. Our films exhibit record-high electron mobility for anatase TiO 2 , in excellent agreement with FEP-DMC calculations conducted prior to experiment, which predict a room-temperature mobility of 45 ± 15 cm −2 V −1 s −1 and a mobility-temperature scaling of μ ∝ T −1.9 ± 0.077 . Microscopic analysis using scanning transmission electron microscopy and x-ray photoelectron spectroscopy reveals the role of oxygen vacancies in modulating transport at lower temperatures. FEP-DMC further provides quantitative insight into polaron formation energy, phonon cloud distribution, lattice distortion around the polaron, and the polaronic contribution to mobility. Together, these results provide a deeper microscopic understanding of large-polaron transport in a complex oxide and provide the blueprint to characterize other polaronic materials.
anatase TiO2↗
Charge correlations and magnetoelastic coupling in intercalated transition metal dichalcogenides
The large van der Waals gap in transition metal dichalcogenides (TMDs) offers an avenue to tune the ground state of 2D materials through the intercalation of magnetic atoms. Here, we investigate the charge correlations in Fe 1/3 TaS 2 , Co 1/3 TaS 2 , and Fe 0.35 NbS 2 by combining angle-resolved photoemission spectroscopy (ARPES), x-ray scattering, magnetometry, and density functional theory (DFT). We find that, while short-range charge fluctuations develop in Ta-based compounds, Fe 0.35 NbS 2 exhibits long-range charge order which is strongly coupled with magnetic order and tunable by external magnetic field. Our electronic structure analysis reveals that intercalation reconstructs the Fermi surface via charge transfer and band renormalization, yet does not generate the nesting conditions compatible with the observed ordering vectors. Complementary phonon calculations further exclude a conventional electron-phonon origin of charge order. Together, these results establish magnetoelastic coupling as the dominant mechanism behind charge ordering in Fe 0.35 NbS 2 and highlight the contrasting role of Nb and Ta hosts in stabilizing correlated ground states in intercalated TMDs.
36 MATERIALS SCIENCE↗
Ultrasensitive Superconducting Transition Edge Sensors Based On Electron-Phonon Decoupling
We have successfully fabricated the superconducting transition edge sensor (TES), bolometer technology that centers on the use of electron-phonon decoupling (EPD) to thermally isolate the bolometer. Along with material characterization for large format antenna coupled bolometer arrays, we present the initial test results of bolometer based on EPD designed for THz detection. We have selected a design approach that separates the two functions of photon absorption and temperature measurement, allowing separate optimization of the performance of each element. We have integrated Molybdenum/Gold (Mo/Au) bilayer TES and ion assisted thermally evaporated (IAE) Bismuth (Bi) films as radiation absorber coupled to a low-loss microstripline from Niobium (Nb) ground plane to a twin-slot antenna structure. The thermal conductance and the time constant of these devices have been measured, and are consistent with our calculations. The device exhibits a single time constant at 0.1 K of approx.160 IlS, which is compatible with readout by a high-bandwidth single SQUID or a time domain SQUID multiplexer. The effects of thermal conductance and electrothermal feedback are major determinants of the time constant, but the electronic heat capacity also plays a major role. The NEP achieved in the device described above is 2.5x10(exp -17)W(gamma)Hz. Our plan is to demonstrate a reduction of the volume in the superconducting element to 5 microns x 5 microns in films of half the thickness at Tc = 60mK. By calculation, this new geometry corresponds to an NEP reduction of two orders of magnitude to 2.5x10(exp -19)W/(gamma)Hz, with a time constant of ~130/ls.
Jethava, Nikhil↗
Distributed Antenna-Coupled TES for FIR Detectors Arrays
We describe a new architecture for a superconducting detector for the submillimeter and far-infrared. This detector uses a distributed hot-electron transition edge sensor (TES) to collect the power from a focal-plane-filling slot antenna array. The sensors lay directly across the slots of the antenna and match the antenna impedance of about 30 ohms. Each pixel contains many sensors that are wired in parallel as a single distributed TES, which results in a low impedance that readily matches to a multiplexed SQUID readout These detectors are inherently polarization sensitive, with very low cross-polarization response, but can also be configured to sum both polarizations. The dual-polarization design can have a bandwidth of 50The use of electron-phonon decoupling eliminates the need for micro-machining, making the focal plane much easier to fabricate than with absorber-coupled, mechanically isolated pixels. We discuss applications of these detectors and a hybridization scheme compatible with arrays of tens of thousands of pixels.
antenna↗
Charge transfer polarisation wave and carrier pairing in the high T(sub c) copper oxides
The High T(sub c) oxides are highly polarizable materials and are charge transfer insulators. The charge transfer polarization wave formalism is developed in these oxides. The dispersion relationships due to long range dipole-dipole interaction of a charge transfer dipole lattice are obtained in 3-D and 2-D. These are high frequency bosons and their coupling with carriers is weak and antiadiabatic in nature. As a result, the mass renormalization of the carriers is negligible in complete contrast to conventional electron-phonon interaction, that give polarons and bipolarons. Both bound and superconducting pairing is discussed for a model Hamiltonian valid in the antiadiabatic regime, both in 3-D and 2-D. The stability of the charge transfer dipole lattice has interesting consequences that are discussed.
Chakraverty, B. K.↗
Development of Superconducting Transition Edge Sensors Based on Electron-Phonon Decoupling
We have successfully fabricated a superconducting transition edge sensor (TES), bolometer that centers on the use of electron-phonon decoupling (EPD) for thermal isolation. We have selected a design approach that separates the two functions of far-infrared and THz radiative power absorption and temperature measurement, allowing separate optimization of the performance of each element. We have integrated molybdenum/gold (Mo/Au) bilayer TES and ion assisted thermally evaporated (IAE) bismuth (Bi) films as radiation absorber coupled to a low-loss microstripline from niobium (Nb) ground plane to a twin-slot antenna structure. The thermal conductance (G) and the time constant for the different geometry device have been measured. For one such device, the measured G is 1.16 x 10(exp -10) W/K (plus or minus 0.61 x 10(exp- 10) W/K) at 60 mK, which corresponds to noise equivalent power (NEP) = 1.65 X 10(exp -18)W/vHz and time constant of approximately 5 microseconds.
Jethava, Nikhil↗
Mitigating Band Tailing in Kesterite Solar Absorbers: Ab Initio Quantum Dynamics
Open-circuit voltage deficits are limiting factors in kesterite solar cells. Addressing this issue by suppressing band tailing and nonradiative charge recombination is essential for enhancing the performance. We employ ab initio nonadiabatic molecular dynamics to elucidate the origin of band tailing and charge losses and propose a mitigation strategy. The simulations show that Cu–Zn disorder, associated with antisite defect clusters [Cu Zn +Zn Cu ], is a significant source of band tailing in kesterites, as evidenced by the much larger Urbach energy in disordered than ordered kesterites. Cu–Zn disorder gives rise to new sulfur-centered coordination polyhedra, increases structural inhomogeneity, changes electrostatic potential at sulfur centers, and shifts the S(3p) orbital energy. Differences in the S(3p)/Cu(3d) and S(3p)/Sn(5s) hybridization strengths and the S(3p) orbital energy shift reduce the band gap by 0.37 eV. Furthermore, Cu–Zn disorder enhances vibrational motion of sulfur anions and surrounding cations, increasing band gap fluctuations by 15 meV. The stronger electron–phonon interactions reduce charge carrier lifetimes and limit the kesterite solar cell efficiency. Partial substitution of Zn with Cd facilitates structural ordering and significantly suppresses band tailing, particularly in disordered systems. The improvement can be attributed to the larger atomic radius and mass of Cd, which weakens bonding around the anion, suppresses S-related vibrations within the covalent tetrahedra, and reduces nonadiabatic coupling, thereby increasing charge carrier lifetimes. The reported results establish the key influence of cation disorder on band tailing and reduced charge carrier lifetimes in kesterites and highlight cation disorder engineering as a strategy to achieve high-efficiency kesterite solar cells.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Phonon-mediated ultrafast dynamics in self-assembled monolayers of 4-mercaptobenzoic acid on gold
Non-equilibrium interactions between plasmonic metals and adsorbed molecules lie at the heart of emerging applications such as plasmonic photocatalysis and sensing, though the ultrafast charge and energy transfer mechanisms arising from these interactions are not well understood. Herein, we investigate the ultrafast dynamics of Au nano-islands tethered with a self-assembled monolayer (SAM) of electron-withdrawing 4-mercaptobenzoic acid (4MBA) molecules. Ultrafast UV-visible transient absorption spectroscopy following excitation of the interband transition in Au reveals three well-known, characteristic time constants that quantify electron–electron (el–el), electron–phonon (el–ph) and phonon–phonon (ph–ph) scattering lifetimes. When comparing the dynamics of bare Au and 4MBA-Au, we find that the el–ph and ph–ph scattering lifetimes are notably longer in 4MBA-Au. Density functional perturbation theory calculations ascribe the elongation in el–ph lifetimes in 4MBA-Au to the significant coupling of acoustic phonon modes of Au with certain molecular vibrations of 4MBA, leading to decreased spatial overlap between carrier electronic states and the acoustic modes. We speculate that the elongation of ph–ph scattering lifetimes in 4MBA-Au arises due to poor thermal conductivity of the SAM which disrupts efficient energy dissipation from Au to the environment, thus slowing down the thermalization of phonons. This work provides a glimpse into how molecular adsorbates modify the charge carrier and phonon dynamics of Au and sets the stage for further systematic exploration of plasmonic metal–molecule interactions.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Bootstrap embedding for interacting electrons in phonon coherent-state mean field
Here, we develop a Fermi–Bose bootstrap embedding framework for the ground state of interacting electrons coupled to a phonon mean field. The method combines bootstrap embedding for correlated electrons with a self-consistent coherent-state mean-field treatment for phonons. This method models the interacting electron–phonon problem as a system of correlated electrons traveling in a self-consistently specified potential landscape, allowing for efficient treatment of large lattice systems. Convergence of the methods for fragment size and total system size is demonstrated for the one-dimensional Hubbard–Holstein model for up to 350 sites. Finite-size scaling is performed to extrapolate to the infinite system size. Benchmarking against the density matrix renormalization group for a small 8-site system at half- and quarter-filling shows an orders-of-magnitude runtime advantage. The comparison further reveals that the method performs best in regimes dominated by localization, such as the Mott insulating phase and the strong-coupling tiny polaron regime, where the local embedding ansatz is still valid. However, due to the mean-field treatment for phonons, we find limitations of our methods in the weakly coupled delocalized region and at the Peierls transition, where quantum phonon fluctuations and long-range kinetic correlations become substantial.
Islam, Shariful [North Carolina State University, ↗
Quasiparticle GW for superconductors: Toward a unified treatment of electron-phonon and electron-plasmon couplings
Explore the source record for details and available documents.
Spataru, Dan Catalin [Sandia National Laboratories↗
A Hot-electron Direct Detector for Radioastronomy
A hot-electron transition-edge superconducting bolometer with adjustable thermal relaxation speed is proposed. The bolometer contacts are made from a superconductor with high critical temperature which blocks the thermal diffusion of hot carriers into the contacts. Thus electron-phonon interaction is the only mechanism for heat removal. The speed of thermal relaxation for hot electrons in a nanometer-size superconducting bolometer with T(sub c) = 100-300 mK is controlled by the elastic electron mean free path l. The relaxation rate behaves as T(sup 4)l at subkelvin temperatures and can be reduced by a factor of 10-100 by decreasing 1. Then an antenna- or wave guide-coupled bolometer with a time constant approx. = 10(exp -3) to 10(exp -4) s will exhibit photon-noise limited performance at millimeter and submillimeter wavelengths. The bolometer will have a figure-of-merit NEPtau = 10(exp -22) - 10(exp -21) W/Hz at 100 mK which is 10(exp 3) to 10(exp 4) times better (ie: smaller) than that of a state-of-the-art bolometer. A tremendous increase in speed and sensitivity will have a significant impact for observational mapping applications.
Karasik, Boris S.↗
A Hot-Electron Far-Infrared Direct Detector
A new approach is proposed to improve the sensitivity of direct-detection bolometers at millimeter, submillimeter and far-infrared wavelengths. The idea is to adjust a speed of the thermal relaxation of hot-electrons in a nanometer size normal metal or super-conductive transition edge bolometer by controlling the elastic electron mean free path. If the bolometer contacts are made of a superconductor with high critical temperature (Nb, Pb etc.) then the thermal diffusion into the contacts is absent because of the Andreev's reflection and the electron-phonon relaxation is the only mechanism for heat removal. The relaxation rate should behave as T(sup 4)l at subkelvin temperatures (l is the electron elastic mean free path) and can be reduced by factor of 10-100 by decreasing l. Then an antenna- or waveguide-coupled bolometer with a time constant about 10(exp -3) to 10(exp -5) s at T approximately equals 0.1-0.3 K will exhibit photon-noise limited performance in millimeter and submillimeter range. The choice of the bolometer material is a tradeoff between a low electron heat capacity and fabrication. A state-of-the-art bolometer currently offers NEP = 10(exp -17) W(Square root of (Hz)) at 100 mK along with a approximately equals 2 msec time constant. The bolometer we propose will have a figure-of-merit, NEP(square root (r)), which is 10(exp 3) times smaller. This will allow for a tremendous increase in speed which will have a significant impact for observational mapping applications. Alternatively, the bolometer could operate at higher temperature with still superior sensitivity. This device can significantly increase a science return and reduce the cost for future observational missions. This research was performed by the Center for Space Microelectronics Technology, Jet Propulsion Laboratory, California Institute of Technology, and was sponsored by NASA, Office of Space Science.
Karasik, B. S.↗