Search NASA⌕ Search

SEARCH · Search NASA

Results for “electron mobility”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

High electron mobility in Ga(In)NAs films grown by molecular beam epitaxy

We report the highest mobility values above 2000 cm{sup 2}/Vs in Si doped GaNAs film grown by molecular beam epitaxy. To understand the feature of the origin which limits the electron mobility in GaNAs, temperature dependences of mobility were measured for high mobility GaNAs and referential low mobility GaInNAs. Temperature dependent mobility for high mobility GaNAs is similar to the GaAs case, while that for low mobility GaInNAs shows large decrease in lower temperature region. The electron mobility of high quality GaNAs can be explained by intrinsic limiting factor of random alloy scattering and extrinsic factor of ionized impurity scattering.

36 MATERIALS SCIENCE↗

Modeling of high composition AlGaN channel high electron mobility transistors with large threshold voltage

We report on the potential of high electron mobility transistors (HEMTs) consisting of high composition AlGaN channel and barrier layers for power switching applications. Detailed two-dimensional (2D) simulations show that threshold voltages in excess of 3 V can be achieved through the use of AlGaN channel layers. We also calculate the 2D electron gas mobility in AlGaN channel HEMTs and evaluate their power figures of merit as a function of device operating temperature and Al mole fraction in the channel. Our models show that power switching transistors with AlGaN channels would have comparable on-resistance to GaN-channel based transistors for the same operation voltage. The modeling in this paper shows the potential of high composition AlGaN as a channel material for future high threshold enhancement mode transistors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electron mobility in modulation-doped heterostructures

A model for electron mobility in a two-dimensional electron gas confined in a triangular well was developed. All major scattering processes (deformation potential and piezoelectric acoustic, polar optical, ionized impurity, and alloy disorder) were included, as well as intrasubband and intersubband scattering. The model is applied to two types of modulation-doped heterostructures, namely GaAs-GaAlAs and In(0.53)Ga(0.47)As-Al(0.52)In(0.48)As. In the former case, phonons and remote ionized impurities ultimately limit the mobility, whereas in the latter, alloy disorder is a predominant scattering process at low temperatures. The calculated mobilities are in very good agreement with recently reported experimental characteristics for both GaAs-Ga(1-x)Al(x)As and In(0.53)Ga(0.47)As-Al(0.52)In(0.48)As modulation-doped heterostructures.

Walukiewicz, W.↗

Demonstration of InAlN/AlGaN high electron mobility transistors with an enhanced breakdown voltage by pulsed metal organic chemical vapor deposition

In this work, InAlN/AlGaN heterostructures employing wider bandgap AlGaN instead of conventional GaN channel were grown on sapphire substrate by pulsed metal organic chemical vapor deposition, where the nominal Al composition in InAlN barrier and AlGaN channel were chosen to be 83% and 5%, respectively, to achieve close lattice-matched condition. An electron mobility of 511 cm{sup 2}/V s along with a sheet carrier density of 1.88 × 10{sup 13 }cm{sup −2} were revealed in the prepared heterostructures, both of which were lower compared with lattice-matched InAlN/GaN due to increased intrinsic alloy disorder scattering resulting from AlGaN channel and compressively piezoelectric polarization in barrier, respectively. While the high electron mobility transistor (HEMT) processed on these structures not only exhibited a sufficiently high drain output current density of 854 mA/mm but also demonstrated a significantly enhanced breakdown voltage of 87 V, which is twice higher than that of reported InAlN/GaN HEMT with the same device dimension, potential characteristics for high-voltage operation of GaN-based electronic devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Impact of proton irradiation on dc performance of AlGaN/GaN high electron mobility transistors

The effects of proton irradiation dose on dc characteristics and the reliability of AlGaN/GaN high electron mobility transistors (HEMTs) were investigated. The HEMTs were irradiated with protons at a fixed energy of 5 MeV and doses ranging from 109 to 2 1014 cm-2. For the dc characteristics, there was only minimal degradation of saturation drain current (IDSS), transconductance (gm), electron mobility and sheet carrier concentration at doses below 2 1013 cm-2, while the reduction of these parameters were 15%, 9%, 41% and 16.6%, respectively, at a dose of 2 1014 cm-2. At this same dose condition, increases of 37% in drain breakdown voltage (VBR) and of 45% in critical voltage (Vcri) were observed. The improvement of device reliability was attributed to the modification of the depletion region due to the introduction of a higher density of defects after irradiation at a higher dose.

Liu, L.↗

Simulation and characterization of millimeter-wave InAlN/GaN high electron mobility transistors using Lombardi mobility model

A gate length of 0.2 μm InAlN/GaN high electron mobility transistor on SiC substrate is obtained with a maximum current gain cutoff frequency (f{sub T}) of 65.8 GHz and a maximum power gain cutoff frequency (f{sub max}) of 143.6 GHz. Lombardi model, which takes interface roughness scattering into consideration, has been introduced to model the transconductance (g{sub m}) degradation. The simulated g{sub m} and f{sub T} with Lombardi model are 69% and 58% lower than the ones without considering interface roughness scattering, respectively. Further analysis show experimental g{sub m}, gate capacitance (C{sub g}), and f{sub T} are consistent with results based on Lombardi model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electron density and currents of AlN/GaN high electron mobility transistors with thin GaN/AlN buffer layer

AlN/GaN high electron mobility transistor (HEMT) structures with thin GaN/AlN buffer layer have been analyzed theoretically and experimentally, and the effects of the AlN barrier and GaN buffer layer thicknesses on two-dimensional electron gas (2DEG) density and transport properties have been evaluated. HEMT structures consisting of [300 nm GaN/ 200 nm AlN] buffer layer on sapphire were grown by plasma-assisted molecular beam epitaxy and exhibited a remarkable agreement with the theoretical calculations, suggesting a negligible influence of the crystalline defects that increase near the heteroepitaxial interface. The 2DEG density varied from 6.8 × 10{sup 12} to 2.1 × 10{sup 13} cm{sup −2} as the AlN barrier thickness increased from 2.2 to 4.5 nm, while a 4.5 nm AlN barrier would result to 3.1 × 10{sup 13} cm{sup −2} on a GaN buffer layer. The 3.0 nm AlN barrier structure exhibited the highest 2DEG mobility of 900 cm{sup 2}/Vs for a density of 1.3 × 10{sup 13} cm{sup −2}. The results were also confirmed by the performance of 1 μm gate-length transistors. The scaling of AlN barrier thickness from 1.5 nm to 4.5 nm could modify the drain-source saturation current, for zero gate-source voltage, from zero (normally off condition) to 0.63 A/mm. The maximum drain-source current was 1.1 A/mm for AlN barrier thickness of 3.0 nm and 3.7 nm, and the maximum extrinsic transconductance was 320 mS/mm for 3.0 nm AlN barrier.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ultrasensitive detection of Hg{sup 2+} using oligonucleotide-functionalized AlGaN/GaN high electron mobility transistor

An oligonucleotide-functionalized ion sensitive AlGaN/GaN high electron mobility transistor (HEMT) was fabricated to detect trace amounts of Hg{sup 2+}. The advantages of ion sensitive AlGaN/GaN HEMT and highly specific binding interaction between Hg{sup 2+} and thymines were combined. The current response of this Hg{sup 2+} ultrasensitive transistor was characterized. The current increased due to the accumulation of Hg{sup 2+} ions on the surface by the highly specific thymine-Hg{sup 2+}-thymine recognition. The dynamic linear range for Hg{sup 2+} detection has been determined in the concentrations from 10{sup −14} to 10{sup −8} M and a detection limit below 10{sup −14} M level was estimated, which is the best result of AlGaN/GaN HEMT biosensors for Hg{sup 2+} detection till now.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Comparison of dc performance of Pt/Ti/Au- and Ni/Au-Gated AlGaN/GaN High Electron Mobility Transistors

We have demonstrated significant improvements of AlGaN/GaN High Electron Mobility Transistors (HEMTs) dc performance by employing Pt/Ti/Au instead of the conventional Ni/Au gate metallization. During off-state bias stressing, the typical critical voltage for HEMTs with Ni/Au gate metallization was ~ -45 to -65V. By sharp contrast, no critical voltage was observed for HEMTs with Pt/Ti/Au gate metallization, even up to -100V, which was the instrumental limitation in this experiment. After the off-state stressing, the drain current of Ni/Au gated-HEMTs decreased by~ 15%. For the Pt-gate HEMTs, no degradation of the drain current occurred and there were minimal changes in the Schottky gate characteristics for both forward and reverse bias conditions. The HEMTs with Pt/Ti/Au metallization showed an excellent drain on/off current ratio of 1.5 108. The on/off drain current ratio of Ni-gated HEMTs was dependent on the drain bias voltage and ranged from 1.2 107 at Vds=5V and 6 105

36 MATERIALS SCIENCE↗

Density-dependent electron transport and precise modeling of GaN high electron mobility transistors

We report on the direct measurement of two-dimensional sheet charge density dependence of electron transport in AlGaN/GaN high electron mobility transistors (HEMTs). Pulsed IV measurements established increasing electron velocities with decreasing sheet charge densities, resulting in saturation velocity of 1.9 × 10{sup 7 }cm/s at a low sheet charge density of 7.8 × 10{sup 11 }cm{sup −2}. An optical phonon emission-based electron velocity model for GaN is also presented. It accommodates stimulated longitudinal optical (LO) phonon emission which clamps the electron velocity with strong electron-phonon interaction and long LO phonon lifetime in GaN. A comparison with the measured density-dependent saturation velocity shows that it captures the dependence rather well. Finally, the experimental result is applied in TCAD-based device simulator to predict DC and small signal characteristics of a reported GaN HEMT. Good agreement between the simulated and reported experimental results validated the measurement presented in this report and established accurate modeling of GaN HEMTs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Resonant tunneling assisted propagation and amplification of plasmons in high electron mobility transistors

A rigorous theoretical and computational model is developed for the plasma-wave propagation in high electron mobility transistor structures with electron injection from a resonant tunneling diode at the gate. We discuss the conditions in which low-loss and sustainable plasmon modes can be supported in such structures. The developed analytical model is used to derive the dispersion relation for these plasmon-modes. A non-linear full-wave-hydrodynamic numerical solver is also developed using a finite difference time domain algorithm. The developed analytical solutions are validated via the numerical solution. We also verify previous observations that were based on a simplified transmission line model. It is shown that at high levels of negative differential conductance, plasmon amplification is indeed possible. The proposed rigorous models can enable accurate design and optimization of practical resonant tunnel diode-based plasma-wave devices for terahertz sources, mixers, and detectors, by allowing a precise representation of their coupling when integrated with other electromagnetic structures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

An enzymatic biosensor based on three-dimensional ZnO nanotetrapods spatial net modified AlGaAs/GaAs high electron mobility transistors

We designed and constructed three dimensional (3D) zinc oxide Nanotetrapods (T-ZnOs) modified AlGaAs/GaAs high electron mobility transistors (HEMTs) for enzymatic uric acid (UA) detection. The chemical vapor deposition synthesized T-ZnOs was distributed on the gate areas of HEMTs in order to immobilize uricase and improve the sensitivity of the HEMTs. Combining with the high efficiency of enzyme immobilization by T-ZnOs and high sensitivity from HEMT, the as-constructed uricase/T-ZnOs/HEMTs biosensor showed fast response towards UA at ∼1 s, wide linear range from 0.2 nM to 0.2 mM and the low detect limit at 0.2 nM. The results point out an avenue to design electronic device as miniaturized lab-on-chip device for high sensitive and specific in biomedical and clinical diagnosis applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of proton irradiation energy on AlGaN/GaN metal-oxide semiconductor high electron mobility transistors

The effects of proton irradiation energy on dc characteristics of AlGaN/GaN metal-oxide semiconductor high electron mobility transistors (MOSHEMTs) using Al 2 O 3 as the gate dielectric were studied. Al 2 O 3 /AlGaN/GaN MOSHEMTs were irradiated with a fixed proton dose of 5 × 10 15 cm -2 at different energies of 5, 10, or 15 MeV. More degradation of the device dc characteristics was observed for lower irradiation energy due to the larger amount of nonionizing energy loss in the active region of the MOSHEMTs under these conditions. The reductions in saturation current were 95.3%, 68.3%, and 59.8% and reductions in maximum transconductance were 88%, 54.4%, and 40.7% after 5, 10, and 15 MeV proton irradiation, respectively. Both forward and reverse gate leakage current were reduced more than one order of magnitude after irradiation. The carrier removal rates for the irradiation energies employed in this study were in the range of 127–289 cm -1 . These are similar to the values reported for conventional metal-gate high-electron mobility transistors under the same conditions and show that the gate dielectric does not affect the response to proton irradiation for these energies.

36 MATERIALS SCIENCE↗

Role of dislocation scattering on electron mobility in coalescent epitaxial lateral overgrowth layers of InP

In order to clarify the effects of dislocation scattering on electron transport properties, temperature dependent (15-300 K) Hall-effect measurements were applied to the dislocated coalescent and dislocation-free non-coalescent ELO layers of InP prepared by the liquid phase epitaxy. The coalescent ELO layers contain a large number of dislocations, and the non-coalescent ELO layers are dislocation-free. Taking into account, the various electron scattering mechanisms in compound semiconductors, the temperature dependences of electron mobility were analyzed. It is shown that the dislocation scattering based on the charged dislocation line model is dominant transport mechanism in the dislocated coalescent ELO layers at low temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Biaxial Tensile Strain Enhances Electron Mobility of Monolayer Transition Metal Dichalcogenides

Strain engineering can modulate the material properties of two-dimensional (2D) sem- iconductors for electronic and optoelectronic applications. Recent theory and experiments have found that uniaxial tensile strain can improve the electron mobility of monolayer MoS 2 , a 2D semiconductor, but the effects of biaxial strain on charge transport are not well-understood in 2D semiconductors. Here, we use biaxial tensile strain on flexible substrates to probe the electron mobility in monolayer WS 2 and MoS 2 transistors. Further, this approach experimentally achieves ~2× higher on-state current and mobility with ~0.3% applied biaxial strain in WS 2 , the highest mobility improvement at the lowest strain reported to date. We also examine the mechanisms behind this improvement through density functional theory simulations, concluding that the enhancement is primarily due to reduced intervalley electron-phonon scattering. These results underscore the role of strain engineering 2D semiconductors for flexible electronics, sensors, integrated circuits, and other opto-electronic applications.

2D materials↗

Electron mobility in n-type Hg(1-x)Cd(x)Te and Hg(1-x)Zn(x)Te alloys

Calculations of electron mobility in n-type mercury cadmium telluride (MCT), a candidate material for IR detectors, and n-type mercury zinc telluride (MZT) are compared. It is found that electron mobilities in MCT and MZT are nearly the same for equivalent energy gaps. The results are also found to compare will with experimental data. Directions of future research are briefly discussed.

Patterson, J. D.↗

Transmission electron microscopy characterization of electrically stressed AlGaN/GaN high electron mobility transistor devices

A set of AlGaN/GaN high electron mobility transistor devices has been investigated using step-stress testing, and representative samples of undegraded, source-side-degraded, and drain-side-degraded devices were examined using electron microscopy and microanalysis. An unstressed reference sample was also examined. All tested devices and their corresponding transmission electron microscopy samples originated from the same wafer and thus received nominally identical processing. Step-stressing was performed on each device and the corresponding current voltage characteristics were generated. Degradation in electrical performance, specifically greatly increased gate leakage current, was shown to be correlated with the presence of crystal defects near the gate edges. However, the drain-side-degraded device showed a surface pit on the source side, and another region of the same device showed no evidence of damage. Moreover, significant metal diffusion into the barrier layer from the gate contacts was also observed, as well as thin amorphous oxide layers below the gate metal contacts, even in the unstressed sample. Overall, these observations emphasize that gate-edge defects provide only a partial explanation for device failure.

Johnson, Michael↗

Electron-Phonon Scattering in the Presence of Soft Modes and Electron Mobility in SrTiO 3 Perovskite from First Principles

Structural phase transitions and soft phonon modes pose a longstanding challenge to computing electron-phonon (e-ph) interactions in strongly anharmonic crystals. Here we develop a first-principles approach to compute e-ph scattering and charge transport in materials with anharmonic lattice dynamics. Our approach employs renormalized phonons to compute the temperature-dependent e-ph coupling for all phonon modes, including the soft modes associated with ferroelectricity and phase transitions. We show that the electron mobility in cubic SrTiO 3 is controlled by scattering with longitudinal optical phonons at room temperature and with ferroelectric soft phonons below 200 K. Our calculations can accurately predict the temperature dependence of the electron mobility in SrTiO 3 between 150-300 K, and reveal the microscopic origin of its roughly T -3 trend. Our approach enables first-principles calculations of e-ph interactions and charge transport in broad classes of crystals with phase transitions and strongly anharmonic phonons.

74 ATOMIC AND MOLECULAR PHYSICS↗