Search NASA⌕ Search

SEARCH · Search NASA

Results for “electrostatic effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Topical Report – Findings on Subtask 2.7 – Wet ESP and Aerosol Testing at Coal Creek Station

Growing concerns over the impact of CO 2 emissions from combustion sources on global climate change have prompted numerous research and development projects aimed at developing cost-effective technologies for CO 2 capture. One family of technologies being demonstrated at pilot and full scale globally is postcombustion carbon capture (PCCC) systems that employ amine-based solvents. The captured CO 2 can be compressed and permanently stored underground or used for enhanced oil recovery. The proximity of North Dakota’s lignite-fired fleet of power plants to potential CO 2 storage options creates a unique atmosphere for PCCC within the state. However, the unique components present in lignite flue gas present a challenge for large-scale PCCC at North Dakota power plants by contributing to aerosol formation. Aerosols can negatively impact the long-term performance of amine-based solvents for CO 2 capture. Amine-based solvents are volatile, and flue gas particulate provides nucleation sites where amine vapors can condense as aerosols. Because aerosols cannot be easily captured at the column outlet using conventional technologies, the amine-laden aerosols escape the system and lead to accelerated solvent losses. Moreover, particulate components can chemically react with amines to form degradation products that can permanently deactivate the amine, cause fouling, and lead to hazardous emissions. Many of the elements that have been shown to catalyze solvent degradation are present in lignite coals and can exacerbate solvent replacement economics. Understanding this issue is critical to the implementation of solvent-based CO 2 capture systems as applied to lignite-fired generation systems. The Energy & Environmental Research Center (EERC) designed and carried out this project to fully characterize aerosol behavior with various control technologies installed to better optimize aerosol mitigation technology for CO 2 capture. To meet the goal of this project, the following objectives were identified: Determine the effectiveness of a wet electrostatic precipitator (WESP) on mitigating formation of problematic aerosols at Great River Energy’s Coal Creek Station, upstream of the PCCC system. Determine the effectiveness of the Mitsubishi Heavy Industries (MHI) proprietary amine emission reduction unit (AERU) as a postcapture solvent recovery system for reducing aerosol emissions and extending solvent life downstream of the PCCC system. Determine the impact of aerosols on the efficiency and degradation products of both commercial and advanced solvents within the PCCC system. Work was conducted at Coal Creek Station Unit 1 using a slipstream of flue gas from the outlet of the plant’s flue gas desulfurization (FGD) unit. Flue gas was routed through a pilot-scale FGD unit to remove SO 2 to very low levels (~1 ppm) and then through a direct contact cooler (DCC) to further cool the gas and to remove moisture. The gas exiting the DCC was then optionally routed through a WESP before passing to the CO 2 absorber columns. The MHI solvent was used to scrub CO 2 from the slipstream through a set of two absorber columns. The rich solvent was regenerated in a stripper column by heating to drive off captured CO 2 . Flue gas exiting the absorber column was routed to MHI’s proprietary AERU to recover entrained solvent. The system operated using a catch-and-release method where the CO 2 was separated to provide data on the process, but the captured CO 2 was released back into the host site stack. Particulate was measured, collected, and analyzed from multiple locations throughout the pilot-scale system. Unlike the performance observed in prior work, the inlet FGD and DCC did not remove significant particulate matter from the flue gas. This appears to be due to a difference in the nature of the particulate. The DCC seemed to increase particulate size and count, most likely owing to water condensing onto the surfaces of fly ash particles. When the WESP was operated, it achieved >95% particulate capture. Very little particulate matter or indications of solvent were detected at the AERU outlet. When operating with advanced KS 21 solvent, the particulate material at the AERU outlet was even further decreased. Solvent analysis showed that some species derived from flue gas and ash were slowly concentrating in the solvent over the duration of the test. The levels observed were reported to be within expected ranges and were not of concern to MHI. A high-level techno-economic assessment of installing CO 2 capture at Coal Creek Station suggested that, when using a standard monoethanolamine (MEA)-based solution with simple heat integration, the energy penalty to net generation would be 34%. The bulk of this was due to steam losses for regenerating solvent, followed by parasitic electrical demand for CO 2 compression and then by increased parasitic load for pushing flue gas through the absorber column. These demands could be decreased with a more advanced solvent that exhibits lower heat of regeneration and lower pressure drop than does a simple MEA solution. Further energy could be saved with more thorough heat integration to recover useful energy from the steam used for solvent regeneration. Installing a WESP was predicted to increase the cost of electricity by nearly $5/MWh. This would become cost-effective if solvent losses were roughly 10 times the baseline estimate when not using a WESP but could be returned to baseline by installing the WESP. Piping CO 2 for storage in more favorable geology could help with carbon capture and storage economics. Although storing off-site would necessitate construction of a CO 2 transport pipeline, the cost of this pipeline might be more than offset by reducing the number of wells required, the depths of the wells required, and the electrical demand for the CO 2 compressor. Additional factors that favor off-site storage costs include smaller expected CO 2 plume sizes, which translates to less monitoring and fewer landowner agreements. More detailed assessment of the specific geology in the region under and around Coal Creek Station would be needed to accurately assess the costs and benefits of different storage site options. This subtask was cofunded through the Energy & Environmental Research Center–U.S. Department of Energy Joint Program on Research and Development for Fossil Energy-Related Resources Cooperative Agreement No. DE-FE0024233. Nonfederal funding was provided by the North Dakota Industrial Commission.

Strege, Joshua↗
DOE OSTI2021

Recent progress on neoclassical impurity transport in stellarators with implications for a stellarator reactor

Accumulation of impurities in the core of the plasma is a potential problem for any fusion reactor, and is thought to be especially problematic for stellarators. We use the collisional transport code SFINCS to calculate, in a reactor stellarator scenario, the effects of flux-surface electrostatic potential variation on tungsten transport. The potential variation is found to have a large effect on the transport, reversing the sign of the transport coefficients related to the radial electric field and the bulk ion temperature gradient, and also increasing the magnitude of the former by two orders of magnitude. We optimize the electrostatic potential variation to minimize impurity accumulation, resulting in a 20%–50% reduction of the inward impurity flux. Furthermore, we investigate whether the electrostatic potential variation caused by fast particles due to ion-cyclotron resonance heating can be used to reduce the impurity accumulation, but find the effect to be small in the cases considered.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

X-ray photoelectron spectroscopy of epitaxial films and heterostructures

X-ray photoelectron spectroscopy is a powerful experimental technique that yields invaluable information on a range of phenomena that occur in solids, liquids, and gasses. The binding energy and shape of a photoemission peak is sensitive not only to the atomic number, valence and orbital from which the electron is ejected, but also to complex many-body effects that accompany photoemission. Provided the influences of these different drivers of spectral line shapes can be disentangled, a great deal can be learned about the electronic structures of specific atoms in the material of interest. In addition to these largely local effects, the long-range electrostatic environment and resulting electric potential at the emitting atom have a direct effect on the measured binding energies. Furthermore, this fact opens the door to extracting information about the dependence of the valence and conduction band minima on depth below the surface, which in turn allows both vertical and lateral electrical transport data to be better understood. One purpose of this Report is to describe how the different physical forces described above impact spectral properties of complex oxide epitaxial films. This class of materials typically incorporates transition metal cations in different valences and of all the elements, these exhibit the most complex core-level spectra. A second purpose is to show how a comprehensive understanding of local physical effects in x-ray photoemission allows one to extract detailed information on internal electric fields and band edge discontinuities in heterostructures involving complex oxides from core-level line shapes.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Enhanced surface superconductivity in Ba(Fe 0.95 Co 0.05 ) 2 As 2

We present direct evidence for an enhanced superconducting Tc on the surface of cleaved single crystals of Ba(Fe 0.95 Co 0.05 ) 2 As 2 . Transport measurements performed on samples cleaved in ultra-high vacuum show a significantly enhanced superconducting transition when compared to equivalent measurements performed in air. Deviations from the bulk resistivity appear at 21 K, well above the 10 K bulk Tc of the underdoped compound. We demonstrate that the excess conductivity above the bulk Tc can be controllably suppressed by application of potassium ions on the cleaved surface, indicating that the enhanced superconductivity is strongly localized to the sample surface. Additionally, we find that the effects of the potassium surface dosing are strongly influenced by the presence of residual gas absorbates on the sample surface, which may prevent effective charge transfer from the potassium atoms to the FeAs plane. This further supports the conclusion that the effects of the dosing (and enhanced superconductivity) are localized within a few layers of the surface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Nanoscale View of Engineered Massive Dirac Quasiparticles in Lithographic Superstructures

Massive Dirac fermions are low-energy electronic excitations characterized by a hyperbolic band dispersion. They play a central role in several emerging physical phenomena such as topological phase transitions, anomalous Hall effects, and superconductivity. This work demonstrates that massive Dirac fermions can be controllably induced by lithographically patterning superstructures of nanoscale holes in a graphene device. Their band dispersion is systematically visualized using angle-resolved photoemission spectroscopy with nanoscale spatial resolution. A linear scaling of effective mass with feature sizes is reported, underlining the Dirac nature of the superstructures. In situ electrostatic doping dramatically enhances the effective hole mass and leads to the direct observation of an electronic band gap that results in a peak-to-peak band separation of 0.64 ± 0.03 eV, which is shown via first-principles calculations to be strongly renormalized by carrier-induced screening. The methodology demonstrates band structure engineering guided by directly viewing structurally and electrically tunable massive Dirac quasiparticles in lithographic superstructures at the nanoscale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Interfacial Cation Arrangement Controls Electrocatalytic Kinetics in CO 2 Reduction

The identity of electrolyte cations is known to strongly influence electrocatalytic activity, but the relationship between their interfacial arrangement and observed performance remains poorly understood. Organic cations, with their molecular tunability, provide a powerful platform for systematically probing these effects. Here, we leverage phosphonium-based geminal dications to control interfacial cation arrangement and identify the variables that most strongly influence catalytic rates. As a case study, we examine CO 2 reduction to CO over polycrystalline silver electrodes in dry aprotic acetonitrile. Through a combination of rotating disk electrode measurements, electrochemical impedance spectroscopy, and molecular dynamics simulations, we decouple the effects of cation–electrode distance and interfacial cation density on catalytic rates. We find that smaller, more densely packed cations induce stronger interfacial electric fields, which lower the activation barrier for CO 2 adsorption and increase reaction rates. Using geminal phosphonium dications [C n (P mmm ) 2 ][ClO 4 ] 2 , we demonstrate that both the vertical and lateral positioning of organic cations within the electrical double layer independently affect reactivity. These results demonstrate that electrolyte cation identity primarily influences catalytic kinetics by determining how efficiently charge can be arranged at electrochemical interfaces. Altogether, our findings support an electrostatic view of cation effects in catalysis and provide design principles for next-generation electrolytes.

Cations↗
DOE OSTI2023

Role of Complexation Strength on the Photophysical and Transport Properties of Semiconducting Charged Polymer Complexes

The high polymer fraction in complexes of conjugated and insulating polyelectrolytes offers unique opportunities for the fabrication of conductive thick films and bulk structures. The electrostatic interactions in these systems further provide a handle for controlling their structure and properties. The impact of charge-mediated complexation strength on the photophysical and electronic transport properties in blends of conjugated polyelectrolytes (CPEs) with oppositely charged polymeric ionic liquids (PILs) was examined. Complexes were formed with varying frequency of charged repeat units, from 50 to 100%, on an anionic polythiophene-based CPE and a complimentary cationic PIL. In highly charged complexes, the intimate mixing between the CPE and the PIL reduced the structural disorder along the CPE backbone, enhancing its intrachain conjugation and interchain stacking. In weakly charged complexes (<90%), these chain planarization effects were absent and microphase separation occurred. At all charge fractions examined, the electrical conductivity of an acid-doped complex was higher than that of the unblended constituent CPE. Further, the highest electrical conductivity, near 1 S cm –1 , was found for a charge fraction of 100%. These results demonstrate the potential for designing effective polymeric conductors using electrostatic complexation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Influence of magnetic angle on the E × B drift in a magnetic presheath

In this work, we provide experimental measurements of the E X B flow above a non-magnetic, absorbing boundary in a magnetized plasma. Measurements are taken as a function of the angle between the background magnetic field and the boundary normal. The measurements are compared to computational predictions for oblique magnetic fields based on Chodura's model. Ion flow measurements were obtained with laser induced fluorescence and the presheath potential structure was measured with an emissive probe. The ions were found to accelerate to nearly 30% of the sound speed parallel to the boundary at oblique angles of the magnetic field (~80°) and the ion speed at the electrostatic sheath edge was found to decrease with angle. The edge of the magnetic presheath has been experimentally determined based on the appearance of the E X B drift and is found to be independent of the angle of the magnetic field. We also demonstrate that laser induced fluorescence is suitable as a non-perturbative diagnostic to measure the electric field in a magnetized sheath.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Subtask 2.6 – Optimization of Aerosol Mitigation Technology for Postcombustion CO 2 Capture

Growing concerns over the impact of CO 2 emissions from combustion sources on global climate change have prompted numerous research and development projects aimed at developing cost-effective technologies for CO 2 capture. One family of technologies being demonstrated at pilot and full scale globally is postcombustion CO 2 capture (PCCC) systems that employ amine-based solvents. The captured CO 2 can be compressed and permanently stored underground or used for enhanced oil recovery (EOR). The proximity of North Dakota’s lignite-fired fleet of power plants to potential CO 2 storage options creates a unique atmosphere for PCCC within the state. However, the aerosols present in lignite flue gas present a challenge for large-scale PCCC at North Dakota power plants. Aerosols can negatively impact the long-term performance of amine-based solvents for CO 2 capture. Amine-based solvents are volatile, and aerosols provide nucleation sites where amine vapors can condense. Because aerosols cannot be easily captured at the column outlet using conventional technologies, the amine-laden aerosols escape the system and lead to accelerated solvent losses. Moreover, aerosol components can chemically react with amines to form degradation products that can permanently deactivate the amine, cause fouling, and lead to hazardous emissions. Many of the elements that have been shown to catalyze solvent degradation are present in lignite coals and can exacerbate solvent replacement economics. Understanding this issue is critical to the implementation of solvent-based CO 2 capture systems as applied to lignite-fired generation systems. The Energy & Environmental Research Center (EERC) designed and carried out this project to optimize aerosol mitigation technology for PCCC at a lignite-fired power plant. To meet the goal of this project, the following objectives were identified: Determine the effectiveness of a wet electrostatic precipitator (WESP) on collection of aerosols at a low-rank coal-fired power station. Determine the impact of aerosols on the efficiency and degradation products of amine-based carbon capture systems fired with low-rank fuels. Work was conducted at Minnkota Power Cooperative’s (MPC’s) Milton R. Young (MRY) Station Unit 2 using a slipstream of flue gas from the outlet of the plant’s flue gas desulfurization (FGD) unit. To gather initial data for sizing and specifying a WESP for this system, a temporary pilot-scale WESP was rented and installed on-site. Several different conditions were tested to examine the impact of flow rate, voltage, and current on WESP performance. The WESP was effective at removing large particulate (>200 nm) but caused an increase in fine particulate (<75 nm). Fine particulate material at the inlet and outlet of the WESP was collected, analyzed, and showed that crystalline sulfates carried over from the plant’s FGD unit were being converted to fine aerosols and SO 2 was being converted to SO 3 through the WESP. Additionally, the high moisture content of the flue gas stream at this sample location also contributed to an overall increase in aerosol mass under some of the test conditions. Using the results from the rented WESP, the project team installed a smaller-scale WESP upstream of the EERC’s slipstream CO 2 capture system. Flue gas was routed through a pilot-scale FGD unit to remove SO 2 to very low levels (~1 ppm) and then through a direct contact cooler (DCC) to further cool the gas and to remove moisture. The gas exiting the DCC was then routed through the new WESP before passing to the CO 2 absorber columns. Fluor’s amine-based solvent was used to scrub CO 2 from the slipstream through a set of two absorber columns. The rich solvent was regenerated in a stripper column by heating to drive off captured CO 2 . The system operated using a catch-and-release method where the CO 2 was separated to provide data on the process, but the captured CO 2 was released back into the host site stack. Aerosols and sulfur species were measured at multiple locations throughout the pilot-scale system. The inlet FGD and DCC removed much of the particulate matter and gaseous sulfur upstream of the WESP. With this configuration, the WESP achieved >95% particulate capture. The new WESP did not show any of the increases in SO 3 or other aerosol species that had been consistently observed with the larger-scale WESP installed immediately downstream of the plant’s full-scale FGD unit. Particulate samples captured and analyzed from the WESP inlet did not show any presence of crystalline sulfate materials, indicating that the pilot-scale FGD and DCC were efficient at reducing carryover from the plant’s full-scale FGD unit. A set of parametric tests were conducted on the new WESP to assess the impacts of flow rate, voltage, number of online WESP fields, and gas-phase sulfur content on aerosol and sulfur transformations. The results showed that the WESP performed similarly well at all sets of conditions. Sulfur and particulate matter exiting the WESP were further reduced through the absorber column as the amine-based solvent captured some of the residual contaminants. Solvent analysis showed that these species were slowly concentrating in the solvent over the duration of the test. When the WESP was taken offline and the sulfur slip through the FGD allowed to rise, the sulfate content in the solvent rose sharply, showing that the extra FGD and WESP were effective at reducing sulfate and cation uptake. This would be expected to extend amine-based solvent life by slowing the formation of heat-stable salts and other degradation products. This subtask was cofunded through the EERC–U.S. Department of Energy Joint Program on Research and Development for Fossil Energy-Related Resources Cooperative Agreement No. DE-FE0024233. Nonfederal funding was provided by the North Dakota Industrial Commission and MPC.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2024

Effects of SARS-CoV-2 Main Protease Mutations at Positions L50, E166, and L167 Rendering Resistance to Covalent and Noncovalent Inhibitors

SARS-CoV-2 propagation under nirmatrelvir and ensitrelvir pressure selects for main protease (MPro) drug-resistant mutations E166V (DRM2), L50F/E166V (DRM3), E166A/L167F (DRM4), and L50F/E166A/L167F (DRM5). DRM2-DRM5 undergoes N-terminal autoprocessing to produce mature MPro with dimer dissociation constants (K dimer ) 2–3 times larger than that of the wildtype. Co-selection of L50F restores catalytic activity of DRM2 and DRM4 from ~10 to 30%, relative to that of the wild-type enzyme, without altering K dimer . Binding affinities and thermodynamic profiles that parallel the drug selection pressure, exhibiting significant decreases in affinity through entropy/enthalpy compensation, were compared with GC373. Reorganization of the active sites due to mutations observed in the inhibitor-free DRM3 and DRM4 structures as compared to MPro WT may account for the reduced binding affinities, although DRM2 and DRM3 complexes with ensitrelvir are almost identical to MPro WT -ensitrelvir. In conclusion, chemical reactivity changes of the mutant active sites due to differences in electrostatic and protein dynamics effects likely contribute to losses in binding affinities.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2022

Dynamic, Adaptive, Systems and Materials: Complex, Simple and Emergent Behaviors

This program has been funded by DoE/BES for twenty years. It has moved into and out of various subjects as it has developed, but it has retained its focus on complexity and complex systems. The project has evolved in the following way: Self-Assembly and Biomimetic Self-Assembly: All self-assembling systems depend upon a minimum of two types of interaction: a repulsion and an attraction. For the familiar molecular systems, attractive interactions are typically hydrogen bonds and electrostatic interactions. Repulsive interactions include steric effects, hydrophobic effects (in biological systems), and charge-charge repulsion. We have expanded this repertoire to include surface interactions, magnetic interactions, and others. I list these systems in the order in which we have explored them: i) A key emphasis in current work is in understanding how the movement of ions in a magnetic field (the Lorentz effect) interacts with catalytic systems. We have demonstrated that an acceleration in rate of reduction of CO 2 to CO can be accomplished by applying an external magnetic field. This acceleration is largely due to the application of the Lorentz effect on mass transport at the catalyst’s surface. ii) We have also extensively explored the influence of electrostatics, as exhibited in self-assembling systems, by tribocharging. iii) Another key system involves surface tension effects; examples include interactions between heavy particles floating at a liquid-air interface, and interacting by changes in surface area; interactions of bubbles and bubble rafts, behaviors of bubble trains in microfluidic networks, and behaviors of microorganisms in constraining environments. iv) This work has intentionally de-emphasized biological systems; but it does include some work on protein-ligand interactions and interactions among microorganisms. v) We have also explored applications of some of these effects, these explorations include bubble rafts as diffraction gratings, exploration of the structures that can be obtained by tribocharging and uses of these structures in exploring nucleation and melting of crystals. vi) Although not a major focus of this work, several other topics have emerged and offer opportunities for future work. These include the behavior of bubble trains and bubble rafts in microfluidic systems. A particularly interesting example is the formation of bubble trains that repeat in the alteration of large and small bubbles according to rules we do not presently understand, but are uniquely large-period oscillating systems. These systems offer a new route into understanding the instabilities of the type represented by oscillations. vii) We have also begun exploratory projects on magnetic levitation (especially to determine molecular density), and information storage (in molecules). Magnetic Levitation: Self-assembling and biomimetic systems require both attraction and repulsion. We have used electrostatics (tribocharging), interfacial free-energies (surface tension and related forces) and others. Potential uses include reconfigurable diffraction gratings and liquid lenses; exploration of mechanisms in tribocharging; tunneling in EGaIn junctions; and bubble trains (especially in micro-fluidic systems). Examples of systems representing these topics is included in the following papers: Complexity: Disks rotating at a water-air interface; Benard-Marangoni effects; Vortex-Crystals from spinning magnetic disks (Marangoni effects); EGaIn Electrode to study quantum tunneling; Self-Assembly of electrostatically-charged metallic spheres (electrets); Dynamically reconfigurable lens; Using computational designs of ligands for enzymes; Electrostatic self-assembly by tribocharging; Monodisperse bubble trains in microchannel systems; Inverted dripping faucet; Flames; Printing of micro-organisms to regenerate the “ink” of printing device; Using micro-organisms to move loads (“microoxen”); Motion of bacterial swarms near surfaces; Making monodisperse particles in microfluidic systems; Coding/decoding of information stored in droplet trains in microfluidic networks; Magnetic levitation; and Information storage. i) Tribocharging. The change in focus of this work on electrets from the fundamentals of charging to applications of these materials in studying self-assembly using electrostatic interactions. ii) Bubbles in Microchannels. The realization that systems of bubbles in microchannels represented a major opportunity to study complexity in a very tractable system, and the development of a semi-quantitative theory of this subject. iii) Flames. The growth of “flames” remains an exploratory subject for the research, although their currently relatively little active work involving it ongoing. iv) Systems with Microorganisms. The removal of work in biological systems from this project. Based on work supported in this program, we now have a significant project on the development of microfluidic tools for studying C. elegans (a nematode), but this work was not appropriate for a program focused on complexity, and we developed separate support for it. (It is, however, an example of successful seeding of a new area by BES.) The work on electrets has gone through a period in which a part of the program was the subject of a MURI; the focus of this work was to develop materials that did not charge electrostatically on friction or contact. The MURI is now over, and the work on dynamic self-assembly (supported by BES) is the major focus. “Flames” has also enjoyed synergistic support, in terms of a project supported by DARPA on flame suppression (in the absence of extinguishing agents, using acoustic and electrostatic interactions). This work was helpful in understanding some of the basics of flames, but is entirely distinct from the BES focus in complexity. A growing interest is in the Lorentz effect. The Lorentz effect is the force exerted on charged particles (electrons, ions, charged molecules) when they move through a perpendicular magnetic field. The Lorentz effect is almost ubiquitous in modern technology: examples of applications include electric motors, dynamos, cathode ray tubes, many batteries, and most systems that control electrical currents with magnetic forces. We have begun to explore the Lorentz effect in electrochemical systems and heterogeneous catalytic systems involving charged organic species and inorganic ions. This work is still at an early stage, but initial studies that Lorentz effects can be large when ions move through magnetic fields, or magnetic fields move in the presence of ions.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Cartesian message passing neural networks for directional properties: Fast and transferable atomic multipoles

The message passing neural network (MPNN) framework is a promising tool for modeling atomic properties but is, until recently, incompatible with directional properties, such as Cartesian tensors. We propose a modified Cartesian MPNN (CMPNN) suitable for predicting atom-centered multipoles, an essential component of ab initio force fields. The efficacy of this model is demonstrated on a newly developed dataset consisting of 46 623 chemical structures and corresponding high-quality atomic multipoles, which was deposited into the publicly available Molecular Sciences Software Institute QCArchive server. We show that the CMPNN accurately predicts atom-centered charges, dipoles, and quadrupoles and that errors in the predicted atomic multipoles have a negligible effect on multipole–multipole electrostatic energies. The CMPNN is accurate enough to model conformational dependencies of a molecule’s electronic structure. This opens up the possibility of recomputing atomic multipoles on the fly throughout a simulation in which they might exhibit strong conformational dependence.

Glick, Zachary L. (ORCID:0000000309002849)↗
DOE OSTI2025

Ponderomotive barriers in rotating mirror devices using static fields

Particularly for aneutronic fusion schemes, it is advantageous to manipulate the fuel species differently from one another and to expel ash promptly. The ponderomotive effect can be used to selectively manipulate particles. It is commonly a result of particle–wave interactions and has a complex dependence on the particle charge and mass, enabling species selectivity. If the plasma is rotating, e.g., due to E x B motion, the ponderomotive effect can be generated using static (i.e., time-independent) perturbations to the electric and magnetic fields, which can be significantly cheaper to produce than time-dependent waves. We propose that this feature can be particularly useful in rotating mirror machines where mirror confinement can be enhanced by rotation, both through centrifugal confinement and additionally through a ponderomotive interaction with a static azimuthal perturbation. We identify specific static perturbations that generate a ponderomotive barrier and other perturbations that can generate either a repulsive barrier or an attractive ponderomotive well, which can be used to attract particles of a certain species while repelling another. We identify the regimes in which the ponderomotive potential can enhance net plasma confinement and the regime in which plasma confinement is not enhanced. The viability of each of these effects is found to be dependent on the specifics of the rotation profile and the resultant dispersion relation in the rotating plasma.

Aneutronic fusion↗
DOE OSTI2020

Control of long-distance motion of single molecules on a surface

Spatial control over molecular movement is typically limited because motion at the atomic scale follows stochastic processes. Here, we used scanning tunneling microscopy to bring single molecules into a stable orientation of high translational mobility where they moved along precisely defined tracks. Single dibromoterfluorene molecules moved over large distances of 150 nanometers with extremely high spatial precision of 0.1 angstrom across a silver (111) surface. The electrostatic nature of the effect enabled the selective application of repulsive and attractive forces to send or receive single molecules. The high control allows us to precisely move an individual and specific molecular entity between two separate probes, opening avenues for velocity measurements and thus energy dissipation studies of single molecules in real time during diffusion and collision.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2022

Asymptotic preserving methods for fluid electron-fluid models in the large magnetic field limit with mathematically guaranteed properties (Final Report)

The current manuscript is a final report on the activities carried out under the Project LDRD-CIS #226834. In scientific terms, the work reported in this manuscript is a continuation of the efforts started with Project LDRD-express #223796 with final report of activities SAND2021-11481, see [83]. In this section we briefly explain what pre-existing developments motivated the current body of work and provide an overview of the activities developed with the funds provided. The overarching goal of the current project LDRD-CIS #226834 and the previous project LDRD-express #223796 is the development of numerical methods with mathematically guaranteed properties in order to solve the Euler-Maxwell system of plasma physics and generalizations thereof. Even though Project #223796 laid out general foundations of space and time discretization of Euler-Maxwell system, overall, it was focused on the development of numerical schemes for purely electrostatic fluid-plasma models. In particular, the project developed a family of schemes with mathematically guaranteed robustness in order to solve the Euler-Poisson model. This model is an asymptotic limit where only electrostatic response of the plasma is considered. Its primary feature is the presence of a non-local force, the electrostatic force, which introduces effects with infinite speed propagation into the problem. Even though instantaneous propagation of perturbations may be considered nonphysical, there are plenty of physical regimes of technical interest where such an approximation is perfectly valid.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Parallel Simulation of Beam Dynamics in Particle Accelerators [Slides]

Particle accelerators are among the most versatile and important tools of scientific discovery. The Nation's accelerators are responsible for a wealth of advances in materials science, chemistry, the biosciences, particle physics, and nuclear physics. They also have important applications to national security, the environment, energy, medicine, and on the quality of people's lives. LANL has a long history of making pioneering contributions to Accelerator Science including key contributions to the field of Computational Accelerator Physics. These include the development of early beam dynamics codes with space charge (such as PARMILA and PARMELA), the development of rf cavity codes and magnet codes (including Poisson and Superfish), and the development and distribution of codes to the accelerator community through the Los Alamos Accelerator Code Group. LANL researchers also helped pioneer the development of massively parallel space-charge codes. In project t22_accelsim we have moved beyond electrostatic models of collective effects (i.e., solving the Poisson equation in the bunch frame) to fully electromagnetic models based on the Lienard-Wiechert formalism. This approach enables the large-scale simulation of radiation production and collective effects in high brightness electron beams. This is highly relevant to LANL given its future goal of developing an X-ray Free Electron Laser (XFEL). It also directly impacts a LANL LDRD project to develop an undulator-based non-invasive beam profile monitor for beams created in laser-plasma accelerator systems.

43 PARTICLE ACCELERATORS↗
DOE OSTI2025

A Universal Model of Cation Effects in Electrocatalysis

Electrolyte cations are conventionally viewed as inert spectators in electrocatalysis. However, a wealth of observations show that catalytic rates are often highly sensitive to cation identity. Despite their prevalence, these cation effects have resisted a unified mechanistic explanation, with different physical phenomena implicated across reaction chemistries, catalyst compositions, and choice of solvent. In this perspective, we describe a general framework for understanding cation effects in electrocatalysis based on electrostatics. We argue that cations influence reaction rates by modifying the strength of the electric field present at the catalyst surface, which alters the energetics of adsorbed intermediates and transition states according to their dipole moments and polarizabilities. The magnitude of this field depends on how cations arrange at the electrode surface, controlled by their size, shape, solvation, and packing efficiency. Cations that can arrange more densely result in a steeper potential drop at the electrode surface and consequently a stronger electric field. Our model further identifies two criteria for observing cation effects: (1) the operating potential must be negative of the electrode’s potential of zero total charge, ensuring that cations accumulate at the interface, and (2) the energetics of the kinetically relevant elementary step must be field sensitive. This framework reconciles previously inconsistent trends, including why cation effects appear only for some catalysts, why reaction selectivity is sensitive to cation identity, and why activity can increase with cation size on certain metals but decrease on others. Supported by kinetic measurements, spectroscopy, and atomistic simulations, the model provides both conceptual value for building intuition about catalysis at charged interfaces and predictive value for anticipating trends for new reactions, catalysts, and electrolytes. We conclude by highlighting the importance of electric fields across electrochemical, thermochemical, and biological catalysis and propose that considering the electrostatic environment around active sites offers new opportunities for improving activity and selectivity.

cation effects↗
DOE OSTI2024

Intramolecular Polarization Contributions to the pKa’s of Carboxylic Acids Through the Chain Length Dependence of Vibrational Tag-Shifts in Cryogenically Cooled Pyridinium-(CH2)n-COOH (n = 1-7) Cations

The pKa’s of acids are known to depend on the ionic strength of an electrolyte solution, an effect that qualitatively results from electrostatic interactions of the acid and conjugate base with proximal ions. Here we explore an intramolecular variation on this theme in which a carboxylic acid group is tethered to a pyridinium cationic charge center with increasingly long alkyl linkages in the series Py+-(CH2)n-COOH, with n = 1-7. The effective acidities of the carboxylic acid group in the isolated cations are determined by recording the red-shifts in the frequencies of the acid OH stretches upon attachment to D2 and N2 molecules, measured by using cryogenic ion spectroscopy. The short chains indeed lead to substantial increases in acidity, with the effect falling off in the range of n = 4-5. The response of the CO stretch on the acid head group is surprisingly strong and, in contrast to the expected red shift of the OH, displays a blue shift as the chain length is reduced. Electronic structure calculations recover these trends and indicate that the proximal cationic charge center acts to draw electron density away from the acid C=O bond. This acts to blue shift the CO stretch while weakening the C-C bond that attaches the head group to the chain.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗