Search NASA⌕ Search

SEARCH · Search NASA

Results for “environmental pollution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Evaluation of a quasi-steady-state approximation of the cloud droplet growth equation (QDGE) scheme for aerosol activation in global models using multiple aircraft data over both continental and marine environments

This research introduces a numerically efficient aerosol activation scheme and evaluates it by using stratus and stratocumulus cloud data sampled during multiple aircraft campaigns in Canada, Chile, Brazil, and China. The scheme employs a quasi-steady-state approximation of the cloud droplet growth equation (QDGE) to efficiently simulate aerosol activation, the vertical profile of supersaturation, and the activated cloud droplet number concentration (CDNC) near the cloud base. The calculated maximum supersaturation values using the QDGE scheme were compared with multiple parcel model simulations under various aerosol and environmental conditions. The differences are all below 0.18 %, indicating good performance and accuracy of the QDGE scheme. We evaluated the QDGE scheme by specifying observed environmental thermodynamic variables and aerosol information from 31 cloud cases as input and comparing the simulated CDNC with cloud observations. The average of mean relative error ($\overline{MRE}$) of the simulated CDNC for cloud cases in each campaign ranges from 17.30 % in Brazil to 25.90 % in China, indicating that the QDGE scheme successfully reproduces observed variations in CDNC over a wide range of different meteorological conditions and aerosol regimes. Additionally, we carried out an error analysis by calculating the maximum information coefficient (MIC) between the MRE and input variables for the individual campaigns and all cloud cases. MIC values were then sorted by aerosol properties, pollution level, environmental humidity, and dynamic condition according to their relative importance to MRE. Based on the error analysis, we found that the magnitude of MRE is more relevant to the specification of input aerosol pollution level in marine regions and aerosol hygroscopicity in continental regions than to other variables in the simulation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Economic Case for Replacing High-Emitting Peaker Plants with Fuel Cells for Automotive Applications

The identification of clean and cost-effective solutions to replace high-emitting peaker plants and support a just transition is a challenge faced by utilities across the US today. However, falling costs of hydrogen production as well as the widespread availability of fuel cells for automotive applications have made them an attractive option for a zero-emission peak power supply. This study evaluates the techno-economics, operation, and environmental justice impacts of siting a peaker plant based on fuel cells for automotive applications through the lens of the existing Intermountain Power Plant, in order to supply peak power to the Los Angeles basin. Compared to the fossil fuel-fired peakers in operation today, the fuel cell peaker would be lower-cost up to a 17% capacity factor with Inflation Reduction Act incentives while also reducing air pollution in environmental justice communities. With corresponding transmission upgrades, the Intermountain site could host up to a 5 GW fuel cell peaker in the future.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Exposure pathways and bioaccumulation of per- and polyfluoroalkyl substances in freshwater aquatic ecosystems: Key considerations

We report that due to the bioaccumulative behavior, toxicity, and recalcitrance to degradation, per- and polyfluoroalkyl substances (PFAS) are a focus for many researchers investigating freshwater aquatic ecosystems. PFAS are a diverse set of chemicals that accumulate and transport quite differently in the environment depending on the length of their fluoroalkyl chains and their functional groups. This diversity in PFAS chemical characteristics combined with varying environmental factors also impact the bioaccumulation of these compounds in different organisms. In this review, we evaluate environmental factors (such as organic carbon, proteins, lipids, and dissolved cations) as well as PFAS characteristics (head group, chain-length, and concentration) that contribute to the significant variation seen in the literature of bioaccumulation metrics reported for organisms in aquatic ecosystems. Of the factors evaluated, it was found that PFAS concentration, dissolved organic matter, sediment organic matter, and biotransformation of precursor PFAS tended to significantly impact reported bioaccumulation metrics the most. Based on this review, it is highly suggested that future studies provide sufficient details of important environmental factors, specific organism traits/ behavior, and PFAS concentrations/compounds when reporting on bioaccumulation metrics to further fill data gaps and improve our understanding of PFAS in aquatic ecosystems.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Naphthalene-DNA Adduct Formation in a Lung Airway Explant Model: The Role of Bioactivation and Naphthalene Metabolites

Humans are widely exposed to naphthalene. Once inhaled or ingested, naphthalene is metabolized by cytochrome P450 and other enzymes to form toxic metabolites known to harm lung epithelial cells. Naphthalene metabolites circulate in the blood. Chronic naphthalene inhalation promotes lesions in the epithelium of the mouse lung and rat nose. Oral naphthalene exposure leads to DNA adduct formation in mouse lung, but the contributions of different enzymatic pathways and the metabolites they generate are not fully understood. This study explores the influence of naphthalene metabolites on DNA adduct formation in the lungs of two species (mice and primates). To isolate the lung response, conducting airway explants containing Club cells, a target for pulmonary naphthalene toxicity, were microdissected from live lung tissue and incubated with 14 C-naphthalene or its metabolites: 14 C-1,2-naphthoquinone or 14 C-naphthalene-1,2-dihydrodiol. Explants were incubated for 1 h, then processed immediately (T1), or were transferred to clean media for the remainder of the 24 h (T24), to monitor 14 C in DNA over time. Accelerator mass spectrometry analysis revealed the formation of DNA adducts by all three radiolabeled compounds by T24. Our results support the notion that P450 enzymes of the Cyp2abfgs subfamily contribute to naphthalene-induced DNA adduct formation (approximately 4-fold reduction in male mice lacking the Cyp2abfgs genes, P < 0.01). The finding that naphthalene-1,2-dihydrodiol, a stable metabolite, formed DNA adducts (102–117 adducts/10 8 nucleotides) at 24 h following addition to the culture media validates the concern that circulating naphthalene metabolites can contribute to DNA adduct formation in the lung. DNA adducts persisted to 24 h after exposure in both mouse and primate airways and at comparable levels between species (77.8 vs 129 adducts/10 8 nucleotides, respectively). Together, these results support the importance of a potential genotoxic mechanism of naphthalene and its metabolites in vivo in both mice and nonhuman primates, and possibly also in humans.

Biological and medical sciences↗
DOE OSTI2022

Catalytic Removal of Oxygen Impurities from Pressurized Oxy-Combustion Flue Gas for the Production of High-Purity Carbon Dioxide

Flue gas purification is important for pressurized oxy-combustion systems to produce pure carbon dioxide (CO 2 ) streams ready for storage or utilization. A catalytic approach to removing oxygen (O 2 ) impurities from pressurized oxy-combustion flue gas via reduction with methane (CH 4 ) was investigated in this work. Two types of catalysts were studied: palladium (Pd)-based catalysts supported on titania (TiO 2 ) prepared by incipient wetness impregnation and cobalt–manganese (CoMn) composite catalysts prepared by coprecipitation. The performance of the catalysts was evaluated in a high-pressure–high-temperature, fixed-bed reactor at a pressure of 15 bar and a gas hourly space velocity of 30 000 h –1 (standard conditions), with a simulated feeding gas composed of 3 vol % O 2 , 1.5 vol % CH 4 , and CO 2 as the balance gas. Among the Pd catalysts, 5% Pd/TiO 2 achieved the maximum 86% O 2 removal at ≥350 °C. The CoMn oxide catalysts displayed comparable or better activities for O 2 reduction compared with the Pd catalysts. Among them, the Co 40 Mn 1 catalyst exhibited the best performance, able to reduce 99.9% of O 2 impurities at ~370 °C with negligible carbon monoxide (CO) formation (<10 ppmv). Both trivalent and divalent Co and Mn were detected on the catalyst surface, and the superior activity of Co 40 Mn 1 might be associated with the resultant disordered structure. Furthermore, the activity of the catalyst was not affected by the presence of a trace amount of nitric oxide (NO) gas contaminant. Results of this study provide the basis for scale-up studies in both the synthesis and performance of non-noble metal catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Modeling and Optimization of a Rotating Packed Bed Contactor with a Tetraamine-Appended Metal−Organic Framework for CO 2 Capture

A potential contactor technology for sorbent-based CO 2 capture is the rotating packed bed that contains separate sections for continuous adsorption and desorption. A heat exchanger can be embedded to remove heat in the adsorption section and add heat in the desorption section. In this work, we develop a two-dimensional (2D) model of a rotating packed bed for use in CO 2 capture applications. Mass and energy balances for the model are developed based on a Ljungström-type air preheater, which accounts for the counter-current axial flow of gas phases in separate sections of the bed and the rotation of a solid sorbent, which cycles between adsorption and desorption sections. The sorbent used for this analysis is the tetraamine-appended metal−organic framework Mg 2 (dobpdc)(3−4− 3), chosen for its stability and affinity for CO 2 at low partial pressures, such as those from a natural gas power plant source. An optimization problem is solved that considers the trade-off between maximizing the productivity of the bed and minimizing energy consumption. Maximum productivity and minimum energy are found to be 8.53 kg/h/m 3 and 3.84 MJ/kg, respectively, when these objectives are optimized independently. It is observed that the flue gas pressure and bed rotational speed are the desired operating variables to vary for model-based design of experiments to reduce uncertainty in parameter estimation, as these two variables yielded the most information content based on the Fisher information matrix.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2023

Optimization of Operating Profit for the FEED of the PZAS Process for CO 2 Capture on a 460 MW NGCC

A rating model of PZAS (Piperazine with the Advanced Stripper) for a 460 MW natural gas combined cycle was developed from vendor-provided equipment performance data. Surrogate rating models were built and used to optimize variable profit of the system subject to natural gas and electricity price at a fixed value for CO 2 of $\$80$/tonne. Several process constraints were considered between ambient temperatures of 4.4 and 40.5 °C. Lower lean loading resulted in lower reboiler heat duty of about 2.2 GJ/tonne. Lean loading at 0.2 mol/equiv N was sufficient at an ambient temperature of 4.4 °C to maximize variable profit. Solvent precipitation was avoided even at low lean loading (0.18 mol/mol) in the absence of a trim cooler for the lean solvent between the absorber and the cold cross exchanger. Optimal CO 2 removal was always higher than the design case removal of 90% and achieved a peak of 93.6% for 4.4 ºC ambient temperature. Lean solvent rate was a significant driver of profitability. The maximum capacity of the compressor was a significant constraint on profitability. Increasing compressor capacity by 20–30% could increase variable profit by about 21% in the case of 0.18 lean loading at 4.4 °C ambient temperature. Furthermore, this increase in profit was lower at higher ambient temperature and higher lean loading. The breakeven gas price was $\$4.6$/MMBtu at high lean loading of 0.22 mol/mol. Below this value, profit was maximized by increasing the boiler heat rate. Above this value, profit could not be increased by burning additional natural gas, requiring a reduction in boiler heat rate and consequently, specific heat duty. At lower lean loading (0.2, 0.18 mol/mol), this transition in heat duty was not observed due to the lower heat duty. As the ambient temperature increased, a similar trend in heat duty was observed at 0.22 lean loading, but the transition to lower heat duty occurred earlier at $\$4$/MMBtu. This was because of the lower CO 2 production at higher ambient temperature, making the process unprofitable at a gas price higher than $\$3$/MMBtu unless the heat duty of the stripper and natural gas boiler is steeply decreased.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Fully Recyclable Polycarbonates from Simple, Bio-Derived Building Blocks

Plastic buildup and accumulation in the environment are an increasingly large problem facing civilization. Petroleum-based plastics can exist for hundreds to thousands of years in the environment, destroying habitats and polluting water. Environmentally conscious replacements for plastics are urgently needed. In this publication, we present a biobased alternative to petroleum-based polycarbonates. Using a diol monomer derived from glycerol and glycerol products, we have synthesized aliphatic polycarbonates with comparable physical properties to petroleum-based incumbents. The polymer can be quantitatively depolymerized using warm methanol to recover the monomer which can be repolymerized multiple times, or alternatively, the monomer, which is inherently nontoxic, can slowly break apart to the original components. This provides two end-of-life options for this material recycle or decomposition under environmental conditions to benign building blocks, thus providing a potential pathway to avoid environmental and bioaccumulation of plastics. We also demonstrate the ability to selectively recover the monomer from a simulated mixed-plastic waste environment; the monomer recovered this way functions identically to the virgin monomer after purification. This work represents an important step in the progress toward environmentally conscious polymer design with multiple end-of-life options.

36 MATERIALS SCIENCE↗
DOE OSTI2021

COVID-19 pandemic reveals persistent disparities in nitrogen dioxide pollution

We leverage the unparalleled changes in human activity during COVID-19 and the unmatched capabilities of the TROPOspheric Monitoring Instrument to understand how lockdowns impact ambient nitrogen dioxide (NO 2 ) pollution disparities in the United States. The least White communities experienced the largest NO 2 reductions during lockdowns; however, disparities between the least and most White communities are so large that the least White communities still faced higher NO 2 levels during lockdowns than the most White communities experienced prior to lockdowns, despite a ~50% reduction in passenger vehicle traffic. Similar findings hold for ethnic, income, and educational attainment population subgroups. Future strategies to reduce NO 2 disparities will need to target emissions from heavy-duty vehicles.

TROPOMI↗
DOE OSTI2023

The effect of ambient ozone exposure on three types of diabetes: a meta-analysis

Background: Ozone as an air pollutant is gradually becoming a threat to people's health. However, the effect of ozone exposure on risk of developing diabetes, a fast-growing global metabolic disease, remains controversial. Objective: To evaluate the impact of ambient ozone exposure on the incidence rate of type 1, type 2 and gestational diabetes mellitus. Method: We systematically searched PubMed, Web of Science, and Cochrane Library databases before July 9, 2022, to determine relevant literature. Data were extracted after quality evaluation according to the Newcastle Ottawa Scale (NOS) and the agency for healthcare research and quality (AHRQ) standards, and a meta-analysis was used to evaluate the correlation between ozone exposure and type 1 diabetes mellitus (T1D), type 2 diabetes mellitus (T2D), and gestational diabetes mellitus (GDM). The heterogeneity test, sensitivity analysis, and publication bias were performed using Stata 16.0. Results: Our search identified 667 studies from three databases, 19 of which were included in our analysis after removing duplicate and ineligible studies. Among the remaining studies, three were on T1D, five were on T2D, and eleven were on GDM. The result showed that ozone exposure was positively correlated with T2D [effect size (ES) = 1.06, 95% CI: 1.02, 1.11] and GDM [pooled odds ratio (OR) = 1.01, 95% CI: 1.00, 1.03]. Subgroup analysis demonstrated that ozone exposure in the first trimester of pregnancy might raise the risk of GDM. However, no significant association was observed between ozone exposure and T1D. Conclusion: Long-term exposure to ozone may increase the risk of T2D, and daily ozone exposure during pregnancy was a hazard factor for developing GDM. Decreasing ambient ozone pollution may reduce the burden of both diseases.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2024

S&TR December 2024 El Capitan issue

At Lawrence Livermore National Laboratory, we focus on science and technology research to ensure our nation’s security. We also apply that expertise to solve other important national problems in energy, bioscience, and the environment. Science & Technology Review is published eight times a year to communicate, to a broad audience, the Laboratory’s scientific and technological accomplishments in fulfilling its primary missions. The publication’s goal is to help readers understand these accomplishments and appreciate their value to the individual citizen, the nation, and the world.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2021

Sensing Techniques for Organochlorides through Intermolecular Interaction with Bicyclic Amidines

Toxic organochloride molecules are widely used in industry for various purposes. With their high volatility, the direct detection of organochlorides in environmental samples is challenging. Here, a new organochloride detection mechanism using 1,5-diazabicyclo[4.3.0]non-5-ene (DBN) is introduced to simplify a sensing method with higher detection sensitivity. Three types of organochloride compounds-trichloroethylene (TCE), dichloromethane (DCM), and dichlorodiphenyltrichloroethane (DDT)—were targeted to understand DCM conjugation chemistry by using nuclear magnetic resonance (NMR) and liquid chromatography with a mass spectrometer (LC-MS). 13C-NMR spectra and LC-MS data indicated that DBN can be labeled on these organochloride compounds by chlorine–nitrogen interaction. Furthermore, to demonstrate the organochloride sensing capability, the labeling yield and limit of detection were determined by a colorimetric assay as well as micellar electrokinetic chromatography (MEKC). The interaction with DBN was most appreciable for TCE, among other organochlorides. TCE was detected at picomolar levels, which is two orders of magnitude lower than the maximum contaminant level set by the United States Environmental Protection Agency. MEKC, in conjunction with this DBN-labeling method, enables us to develop a field-deployable sensing platform for detecting toxic organochlorides with high sensitivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Accelerating Adoption of Energy-Efficient Technology with the Thermalize Model

The accelerating impacts of climate change destabilize food systems and ecosystems alongside the communities that rely on them. Thus, climate resilience is a health equity issue at both a physical (relating to biological impacts of pollution and environmental degradation) and a cultural level (loss of subsistence lifestyles, languages, etc). With roughly 20% of US energy-related greenhouse gas emissions stemming from heating, cooling, and powering households, accessible energy-efficient home retrofits are a critical element of climate change mitigation strategies. For communities already producing electricity from renewable sources, like Juneau, incentivizing ductless heat pump upgrades and energy efficiency retrofits provides an accessible pathway to transition households away from oil heating and drastically reduce emissions. Thermalize Juneau is a pilot program that will explore a repeatable framework for accelerating the adoption of energy-efficient technology in Alaska communities. This poster will describe Thermalize Juneau's goals and framework, progress through spring 2021, and future plans.

ductless heat pumps↗
DOE OSTI2023

Stakeholder analysis for designing an urban air quality data governance ecosystem in smart cities

Cities, the world over, are fuelling economic growth. At the same time, rapid urbanization is a root cause of serious environmental damage. Recent WHO global air pollution guidelines highlight air pollution as a critical environmental threat along with climate change. To address these threats, smart cities and clean air programs are on a rise. In smart cities, data and Information and Communication Technologies (ICT) are major drivers of city transformations. The 4th Industrial Revolution (4IR) technologies such as the Internet of Things (IoT), big data, artificial intelligence (AI), and cloud computing have the potential to accelerate these transformations toward urban resilience. However, the success of smart cities and clean air programs depends on cohesive multi-sector stakeholder contributions. This study conducted interdisciplinary participative stakeholder analysis to understand the data, and sectorial challenges, to outline the technological opportunities to facilitate clean air programs in Indian smart cities. The research highlights gaps due to siloed stakeholder operations, lack of data calibration, non-alignment of smart city and air quality management services, non-availability of health exposure data, and difficulty in translating scientific data into implementable actions. Stakeholders expressed potential ‘fit for the purpose’ use of IoT devices, satellites, smartphones, and mobility data augmented by AI methods in bridging these gaps. In conclusion, the analysis points toward a need to develop an easily accessible and ubiquitous urban data governance ecosystem enabling seamless cross-sector data exchanges to build trusting relationships among the stakeholders across the air quality management value chain.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗