Search NASA⌕ Search

SEARCH · Search NASA

Results for “exhaust solution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Numerical simulation of backward step and jet exhaust flows

Preparatory to a continuing study of efficient, high resolution flow structure capture on patched mesh systems, turbulent flowfield solutions for a tactical missile base flow problem are computed on two first level composite grids of differing topologies. One mesh is of the wraparound character and the other is a step mesh on the Cartesian topology. A simplified Baldwin-Lomax algebraic eddy viscosity model is applied in the wake region. Results for the two meshes are compared with each other and with other computations reported in the literature. The totality of results suggest both mesh topology and resolution are important factors in the accuracy of predictive results as well as turbulence modeling. Related to interests in high altitude laminar flows bluff bodies such as the AOTV, the paper also presents results from a solution from laminar flow over a backward facing step and makes comparison with the available classical experiment of Chapman, et al.

Lombard, C. K.↗
NASA NTRS1995

Validation of the NPARC code for nozzle afterbody flows at transonic speeds

The NPARC code, a Reynolds-averaged full Navier-Stokes code, was validated for nozzle afterbody (boatail) flow fields at transonic speeds. The flow fields about three geometries were studied: an axisymmetric nozzle with attached flow; an axisymmetric nozzle with separated flow: and a two-dimensional (rectangular) nozzle with separated flow. Three turbulence models, Baldwin-Lomax, Baldwin-Barth, and Chien k-epsilon, were used to determine the effect of turbulence model selection on the flow field solution. Static pressure distributions on the nozzle surfaces and pitot pressure measurements in the exhaust plume were examined. Results from the NPARC code compared very well with experimental data for all cases. For attached flow fields, the effect of the turbulence models showed no discernable differences. The Baldwin-Barth model yielded better results than either the Chien k-epsilon or the Baldwin-Lomax model for separated flow fields.

Debonis, James R.↗
NASA NTRS1992

Mechanism of delayed intracranial hypertension after cerebroventricular infusions in conscious rats

Prior studies showed that cerebroventricular infusions of artificial cerebrospinal fluid, 8 microliter/min for 10 min, followed by a 10 min rest and a 24 h infusion of 0.5 microliters/min, raised cerebrospinal fluid pressure (CSFp) of conscious, unrestrained rats after about 2 h. Here, we report that the 10 min infusion alone evoked a delayed, prolonged rise in CSFp. Pressure during the infusion itself rose and recovered quickly, as is usually reported. Pressure/volume tests, used to calculate resistance to outflow (Ro) and compliance (C), revealed that infusions increased Ro and decreased C, after a delay (P less than 0.05). The rise in CSFp after infusion was blocked by pretreatment with acetazolamide + ouabain (P less than 0.05), but the delayed changes in Ro and C were unaffected. We suggest that the 10 min infusion of a sterile, balanced salt solution has a primary effect that increases Ro; as CSF synthesis continues, C is exhausted and the delayed rise in CSFp ensues. This non-traumatic method of raising CSFp may be a useful method to study intracranial fluid dynamics.

NASA Center ARC↗
NASA NTRS1968

Propulsive re-entry aerodynamics Interim report, 1 Jun. 1967 - 1 Jun. 1968

This report discusses the progress accomplished during the first year of a two-year contract to study Propulsive Re-Entry Aerodynamics. Analytical methods were developed during the first year to predict the flow field in the immediate vicinity of a planetary entry system composed of an aeroshell with a single retrorocket which exhausts into a subsonic or supersonic counterflowing planetary atmosphere. In the second year a digital computer program will be developed for the analytical solutions, and the analytical model will be tested by performing an experimental test program and comparing the experimental results with the analytical predictions. The analytical investigation considers the flow field due to a single supersonic retrorocket exhausting from an aeroshell into oncoming subsonic, transonic, or supersonic streams in the large thrusting coefficient regime, 0.5 < C(sub T) = T/q(sub ∞) A(sub m) < 15, which is the range of thrusting coefficients encountered during the terminal landing phase for planetary landing on Mars or Venus. Analyses are provided for all the geometrical features of the flow field such as the location of the terminal shock, jet boundary, and the profile for the interface between the jet and atmospheric gases. In addition, analyses are developed which describe the growth of the mixing layers along the interface and at the edge of the jet boundary and dead-air region and the reattachment of the shear layer to the aeroshell or the recompression of the shear layer in wake type flow. A comprehensive discussion of the experimental wind tunnel test program to be accomplished in Phase II is presented.

Philip O Jarvinen↗
NASA NTRS2004

NASA's Vision for Jet Noise Engineering

Until recently, the design of jet engines for quiet operation was limited by engineers' ability to predict the jet noise generated by a nozzle exhaust system. More importantly, the 'intermediate steps' between nozzle design and noise had not been understood, limiting the design process to small variations around existing solutions. In recent years NASA's Quiet Aircraft Technology (QAT) Program has advanced the understanding and modeling of jet noise to give engineers the tools they need to design quiet nozzle systems for subsonic exhaust systems. The presentation discusses the approach followed for QAT and argues that a similar effort aimed at supersonic jet exhaust systems will be needed to allow designs of quiet military aircraft in the future.

Kinzie, Kevin W.↗
NASA NTRS1973

Investigation of the reactions of skin panels in relation to duration of acoustical loading

Certain characteristics of the reactions of typical skin panels of a passenger aircraft to acoustical loading are being investigated, for development of an objective method of diagnostics for skin condition, under the operations and maintenance sections of civil aviation. There are a number of difficulties connected with the solution of this problem. The reactions of skin panels exposed to the noises of the exhaust jets are dependent on the aircraft operating conditions, the geometric parameters and limiting conditions of the panels.

Kvitka, V. Y.↗
NASA NTRS1991

Estimated accuracy of method of characteristics viscous plume solutions for an orbit plume induced environment prediction

A study has been performed to determine an estimate of the accuracy of rocket exhaust plume induced spacecraft environments calculated with the more widely used computational methods. Calculations of plume flowfields and plume induced environments using Method of Characteristic (MOC) based models are compared with both experimental results and direct simulation Monte Carlo (DSMC) results to determine the applicability and accuracy of Method of Characteristic models.

Smith, Sheldon D.↗
NASA NTRS2019

Lunar and Martian Vertical Takeoff & Vertical Landing (VTVL) Pad Concepts

Landing space craft rocket plume exhaust interactions with the regolith surfaces on the Moon and Mars will result in cratering and regolith particle ejecta traveling at velocities up to 2,000 meters per second in the vacuum surroundings. This phenomenon creates hazards for the spacecraft that is landing or launching and may also cause damage to surrounding assets, personnel and infrastructure. One potential solution to this issue is to construct vertical takeoff and vertical landing (VTVL) pad infrastructure systems which will mitigate these rocket plume exhaust effects. Concepts will be presented for the construction and maintenance of such VTVL pads in lunar and martian environments.

Pad↗
NASA NTRS1981

Experiments on three-dimensional separating and reattaching flows

In studies of multijet rockets, failure to find solutions when using a reasonable mathematical model led to performing airflow tests of supersonic circular jets exhausting into noncircular channels of various sizes. Amomalous base pressure trends and puzzling wall pressure patterns resulted. A flow-into-the-corner test was then devised, using a 90 deg trough behind a back step. A vortex pair, generated by the unsymmetrical squeezing of the shear layer, was found to fill much of the corner and provided an explanation for the peculiar results of the previous tests. No previous reference could be found to this phenomenon. Further experiments of bodies with base fins defined the conditions for creating this trough vortex effect. The trough vortex was used successfully as an igniter/flameholder for combustion of hydrogen in a supersonic stream. Other applications are suggested for base drag reduction, base burning and for providing guidance to avoid errors in half-plane wind tunnel model testing.

Zumwalt, G. W.↗
NASA NTRS2006

Mission Operations Planning with Preferences: An Empirical Study

This paper presents an empirical study of some nonexhaustive approaches to optimizing preferences within the context of constraint-based, mixed-initiative planning for mission operations. This work is motivated by the experience of deploying and operating the MAPGEN (Mixed-initiative Activity Plan GENerator) system for the Mars Exploration Rover Mission. Responsiveness to the user is one of the important requirements for MAPGEN, hence, the additional computation time needed to optimize preferences must be kept within reasonabble bounds. This was the primary motivation for studying non-exhaustive optimization approaches. The specific goals of rhe empirical study are to assess the impact on solution quality of two greedy heuristics used in MAPGEN and to assess the improvement gained by applying a linear programming optimization technique to the final solution.

Bresina, John L.↗
NASA NTRSDate not supplied

Computational Assessment of the Impact of Wave Count on Rotating Detonation Engine Performance

The impact of the number of azimuthally propagating waves on the performance of a Rotating Detonation Engine (RDE) is investigated using a simplified two-dimensional computational fluid dynamic simulation. The basic RDE configuration examined has no exit throat. The inlet is assumed lossless and does not allow backflow. The adiabatic, inviscid, and premixed simulation utilizes a particularly simple finite rate reaction mechanism that allows user control over the relative amounts of deflagration and detonation that occur, the presence and extent of a reaction delay associated with fuel and oxidizer mixing, and the number of waves present in the domain. The simplifications and idealizations decouple the effect of wave count from other potential loss mechanisms. Performance is measured using exhaust flow total pressure gain relative to the inlet total pressure. One, two, and three wave solutions are computed under identical boundary conditions and grid resolution. For simulations with no mixing delay and minimal deflagration, the number of waves present has negligible impact on performance. With a mixing delay, performance decreases with increasing wave number. With increased deflagration, performance increases with increasing wave number. With both effects simulated it is found that the two wave solution performs better than either the one or three wave solutions. The causes of these trends are explored. They imply that for practical, RDE’s, the number of waves that are present can impact performance.

Detonation↗
NASA NTRSDate not supplied

Computational Assessment of the Impact of Wave Count on Rotating Detonation Engine Performance

The impact of the number of azimuthally propagating waves on the performance of a Rotating Detonation Engine (RDE) is investigated using a simplified two-dimensional computational fluid dynamic simulation. The basic RDE configuration examined has no exit throat. The inlet is assumed lossless and does not allow backflow. The adiabatic, inviscid, and premixed simulation utilizes a particularly simple finite rate reaction mechanism that allows user control over the relative amounts of deflagration and detonation that occur, the presence and extent of a reaction delay associated with fuel and oxidizer mixing, and the number of waves present in the domain. The simplifications and idealizations decouple the effect of wave count from other potential loss mechanisms. Performance is measured using exhaust flow total pressure gain relative to the inlet total pressure. One, two, and three wave solutions are computed under identical boundary conditions and grid resolution. For simulations with no mixing delay and minimal deflagration, the number of waves present has negligible impact on performance. With a mixing delay, performance decreases with increasing wave number. With increased deflagration, performance increases with increasing wave number. With both effects simulated it is found that the two wave solution performs better than either the one or three wave solutions. The causes of these trends are explored. They imply that for practical, RDE’s, the number of waves that are present can impact performance.

Detonation↗
NASA NTRS1988

Development of three-dimensional code for the analysis of jet mixing problem. Part 1: Laminar solution

Future aircraft will eventually feature nonaxisymmetric or rectangular nozzles. Developing a three-dimensional code to stimulate the characteristics of the jet exhaust plume, issuing from nonaxisymmetric nozzles, in general, at different flight conditions, is very important. Two three-dimensional codes were developed to simulate the shock-cell structure of circular nozzles. These codes were developed to solve the parabolized and simplified Navier-Stokes equations respectively. Both codes are based on a method previously developed by Newsome et al. These codes are fully vectorized on the VPS 32 at NASA Langley Research Center. The axisymmetric underexpanded supersonic jet flow problem, exhausting into still air, was used as a test case for developing an efficient three-dimensional problems and preserving crossplane symmetry of the flow downstream of the jet exit.

Abdol-Hamid, Khaled S.↗
NASA NTRS1975

Copper emissions from a high volume air sampler

High volume air samplers (hi vols) are described which utilize a brush-type electric motor to power the fans used for pulling air through the filter. Anomalously high copper values were attributed to removal of copper from the commutator into the air stream due to arcing of the brushes and recirculation through the filter. Duplicate hi vols were set up under three operating conditions: (1) unmodified; (2) gasketed to prevent internal recirculation; and (3) gasketed and provided with a pipe to transport the motor exhaust some 20 feet away. The results of 5 days' operation demonstrate that hi vols can suddenly start emitting increased amounts of copper with no discernible operational indication, and that recirculation and capture on the filter can take place. Copper levels found with hi vols whose exhaust was discharged at a distance downwind were among the lowest found, and apparently provides a satisfactory solution to copper contamination.

King, R. B.↗
NASA NTRS1984

Simulation Applications at NASA Ames Research Center

Aeronautical applications of simulation technology at Ames Research Center are described. The largest wind tunnel in the world is used to determine the flow field and aerodynamic characteristics of various aircraft, helicopter, and missile configurations. Large computers are used to obtain similar results through numerical solutions of the governing equations. Capabilities are illustrated by computer simulations of turbulence, aileron buzz, and an exhaust jet. Flight simulators are used to assess the handling qualities of advanced aircraft, particularly during takeoff and landing.

Inouye, M.↗
NASA NTRS1993

Jet to freestream velocity ratio computations for a jet in a crossflow

The flowfield induced by a single, subsonic jet exhausting perpendicularly from a flat plate into a subsonic crossflow has been numerically investigated. Time-averaged solutions were obtained using the thin-layer Navier-Stokes equations and two overlapping grids. Test cases were chosen to match available experimental data where the jet Mach number was 0.78 and the freestream Mach number was varied to represent effective velocity ratios R from 4 to 12. Comparisons of the pressures induced on the flat plate are presented. The results show that the best agreement is obtained for R of 4 and 6, R of 8 is more difficult to resolve, and the R of 12 solution was not satisfactory. It is anticipated that the resolution could be improved by using either smaller time steps or finer grid spacing as R increases.

Margason, Richard J.↗
NASA NTRS2007

Design and Analysis of a Formation Flying System for the Cross-Scale Mission Concept

The ESA-funded "Cross-Scale Technology Reference Study has been carried out with the primary aim to identify and analyse a mission concept for the investigation of fundamental space plasma processes that involve dynamical non-linear coupling across multiple length scales. To fulfill this scientific mission goal, a constellation of spacecraft is required, flying in loose formations around the Earth and sampling three characteristic plasma scale distances simultaneously, with at least two satellites per scale: electron kinetic (~10 km), ion kinetic (~100-2000 km), magnetospheric fluid (~3000-15000 km). The key Cross-Scale mission drivers identified are the number of S/C, the space segment configuration, the reference orbit design, the transfer and deployment strategy, the inter-satellite localization and synchronization process and the mission operations. This paper presents a comprehensive overview of the mission design and analysis for the Cross-Scale concept and outlines a technically feasible mission architecture for a multi-dimensional investigation of space plasma phenomena. The main effort has been devoted to apply a thorough mission-level trade-off approach and to accomplish an exhaustive analysis, so as to allow the characterization of a wide range of mission requirements and design solutions.

Cornara, Stefania↗
NASA NTRS1989

Computation of aircraft component flow fields at transonic Mach numbers using a three-dimensional Navier-Stokes algorithm

A computer analysis was developed for calculating steady (or unsteady) three-dimensional aircraft component flow fields. This algorithm, called ENS3D, can compute the flow field for the following configurations: diffuser duct/thrust nozzle, isolated wing, isolated fuselage, wing/fuselage with or without integrated inlet and exhaust, nacelle/inlet, nacelle (fuselage) afterbody/exhaust jet, complete transport engine installation, and multicomponent configurations using zonal grid generation technique. Solutions can be obtained for subsonic, transonic, or hypersonic freestream speeds. The algorithm can solve either the Euler equations for inviscid flow, the thin shear layer Navier-Stokes equations for viscous flow, or the full Navier-Stokes equations for viscous flow. The flow field solution is determined on a body-fitted computational grid. A fully-implicit alternating direction implicit method is employed for the solution of the finite difference equations. For viscous computations, either a two layer eddy-viscosity turbulence model or the k-epsilon two equation transport model can be used to achieve mathematical closure.

Shrewsbury, George D.↗