SEARCH · Search NASA

Results for “extreme wind speeds”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

All sources NASA NTRS DOE OSTI

NASA NTRS1974

The effect of wind tunnel wall interference on the performance of a fan-in-wing VTOL model

A fan-in-wing model with a 1.07-meter span was tested in seven different test sections with cross-sectional areas ranging from 2.2 sq meters to 265 sq meters. The data from the different test sections are compared both with and without correction for wall interference. The results demonstrate that extreme care must be used in interpreting uncorrected VTOL data since the wall interference may be so large as to invalidate even trends in the data. The wall interference is particularly large at the tail, a result which is in agreement with recently published comparisons of flight and large scale wind tunnel data for a propeller-driven deflected-slipstream configuration. The data verify the wall-interference theory even under conditions of extreme interference. A method yields reasonable estimates for the onset of Rae's minimum-speed limit. The rules for choosing model sizes to produce negligible wall effects are considerably in error and permit the use of excessively large models.

Heyson, H. H.↗

NASA NTRS2014

Venus Landsailer Zephyr

Imagine sailing across the hot plains of Venus! A design for a craft to do just this was completed by the COncurrent Multidisciplinary Preliminary Assessment of Space Systems (COMPASS) Team for the NASA Innovative Advanced Concepts (NIAC) project. The robotic craft could explore over 30 kilometers of the surface of Venus, driven by the power of the wind. The Zephyr Venus Landsailer is a science mission concept for exploring the surface of Venus with a mobility and science capability roughly comparable to the Mars Exploration Rovers (MER) mission, but using the winds of the thick atmosphere of Venus for propulsion. It would explore the plains of Venus in the year 2025, near the Venera 10 landing site, where wind velocities in the range of 80 to 120 centimeters per second (cm/s) were measured by earlier Soviet landing missions. These winds are harnessed by a large wing/sail which would also carry the solar cells to generate power. At around 250 kilograms (kg), Zephyr would carry an 8 meter tall airfoil sail (12 square meters area), 25 kg of science equipment (mineralogy, grinder, and weather instruments) and return 2 gigabytes of science over a 30 day mission. Due to the extreme temperatures (450 degrees Centigrade) and pressures (90 bar) on Venus, Zephyr would have only basic control systems (based on high temperature silicon carbide (SiC)electronics) and actuators. Control would come from an orbiter which is in turn controlled from Earth. Due to the time delay from the Earth a robust control system would need to exist on the orbiter to keep Zephyr on course. Data return and control would be made using a 250 megahertz link with the orbiter with a maximum data rate of 2 kilobits per second. At the minimal wind speed required for mobility of 35 cm/s, the vehicle move at a slow but steady 4 cm/s by positioning the airfoil and use of one wheel that is steered for pointing control. Navigation commands from the orbiter will be based upon navigation cameras, simple accelerometers and stability sensors; Zephyr's stability is robust, using a wide wheel base along with controls to "feather" or "luff" the airfoil and apply brakes to stop the vehicle in the case of unexpected conditions. This would be the science gathering configuration. The vehicle itself would need to be made from titanium (Ti) as the structural material, with a corrosion-barrier overcoating due to extreme temperatures on the surface.

Wind Sailing↗

NASA NTRS1997

Laser Scanning System for Pressure and Temperature Paints

Acquiring pressure maps of aerodynamic surfaces is very important for improving and validating the performance of aerospace vehicles. Traditional pressure measurements are taken with pressure taps embedded in the model surface that are connected to transducers. While pressure taps allow highly accurate measurements to be acquired, they do have several drawbacks. Pressure taps do not give good spatial resolution due to the need for individual pressure tubes, compounded by limited space available inside models. Also, building a model proves very costly if taps are needed because of the large amount of labor necessary to drill, connect and test each one. The typical cost to install one tap is about $200. Recently, a new method for measuring pressure on aerodynamic surfaces has been developed utilizing a technology known as pressure sensitive paints (PSP). Using PSP, pressure distributions can be acquired optically with high spatial resolution and simple model preparation. Flow structures can be easily visualized using PSP, but are missed using low spatial resolution arrays of pressure taps. PSP even allows pressure distributions to be found on rotating machinery where previously this has been extremely difficult or even impossible. The goal of this research is to develop a laser scanning system for use with pressure sensitive paints that allows accurate pressure measurements to be obtained on various aerodynamic surfaces ranging from wind tunnel models to high speed jet engine compressor blades.

Sullivan, John↗

NASA NTRS1997

Laser Scanning System for Pressure and Temperature Paints

Sullivan, John↗

NASA NTRS1987

Experimental study of laminar boundary layer receptivity to a traveling pressure field

Study is made of the production of Tollmien-Schlichting (T-S) waves within a Blasius boundary layer by an externally-imposed, two-dimensional, pressure field of a particular type. The field is that due to flow past a relatively small cylinder aligned parallel to the test plate and normal to the flow. The cylinder was carried on a circular path about an axis located well above the plate and such that the closest approach of the cylinder to the layer was several times the layer thickness or cylinder diameter. The turbulent wake did not, therefore, directly perturb the layer. Through adjustment of the circumferential velocity, the pressure field was swept along a certain region of the plate with controllable speed. Both the pressure field and the layer response are described in detail. It is shown that the production of T-S waves was sharply maximal for the case of circumferential speed near that of freely-propagating T-S waves, and that the coupling efficiency was extremely high for this case of resonance. The relevance of this energy transfer process to T-S wave production by the unsteady pressure fields resulting from wind tunnel wall turbulent boundary layers for both subsonic and supersonic flow is mentioned.

Kendall, James M.↗

NASA NTRS2006

Polarimetric Microwave Remote Sensing of Hurricane Ocean Winds

We presented the analysis of Windsat data for hurricanes Isabel and Fabian in 2003. The polarimetric third and fourth Stokes parameter observations from the Windsat 10, 18 and 37 GHz channels were collocated with the ocean surface winds from the Holland wind model, the QuikSCAT wind vectors and the Global Data Assimilation System (GDAS) operated by the National Center for Environmental Prediction (NCEP). The collocated data were binned as a function of wind speed and wind direction, and were expanded by sinusoidal series of the relative azimuth angles between wind and observation directions. The coefficients of the sinusoidal series, corrected for atmospheric attenuation, have been used to develop an empirical geophysical model function (GMF). The Windsat GMF for extreme high wind compares very well with the aircraft radiometer and radar measurements.

widebands↗

NASA NTRS2006

Combined Active and Passive Remote Sensing of Hurricane Ocean Winds

The synergism of active and passive microwave techniques for hurricane ocean wind remote sensing is explored. We performed the analysis of Windsat data for Atlantic hurricanes in 2003-2005. The polarimetric third Stokes parameter observations from the Windsat 10, 18 and 37 GHz channels were collocated with the ocean surface winds from the Holland wind model, the QuikSCAT wind vectors and the Global Data Assimilation System (GDAS) operated by the National Center for Environmental Prediction (NCEP). The collocated data were binned as a function of wind speed and wind direction, and were expanded by sinusoidal series of the relative azimuth angles between wind and observation directions. The coefficients of the sinusoidal series, corrected for atmospheric attenuation, have been used to develop an empirical geophysical model function (GMF). The Windsat GMF for extreme high wind compares very well with the aircraft radiometer and radar measurements.

sea surface winds↗

NASA NTRS2017

An Automaton Rover Enabling Long Duration In-Situ Science in Extreme Environments

The Automaton Rover for Extreme Environments (AREE) is a NASA Innovative Advanced Concept (NIAC) funded study focused on enabling long duration science on Venus by replacing vulnerable electronics with an entirely mechanical design. By utilizing high temperature alloys, the rover would survive on the surface of Venus for weeks if not months. The rover concept harvests wind energy using a turbine and stores it in a constant force spring. The mobility system would be guided by a mechanical computer and logic system, programed to carry out the mission. It would collect basic science data such as wind speed, temperature, and seismic events. Communicating the data back to Earth is the most challenging aspect of the system design with multiple options being explored in a trade: a simple electronic high temperature transponder, a retroreflector target or inscribing phonograph style records to be launched via a balloon to a high altitude drone capable of transmitting the data back to Earth. AREE is not only a new exciting in-situ rover concept, but also a paradigm shift to conducting in-situ science in extreme environments. Traditional extreme environment vehicles collect as many diverse data points as possible in the short period of time before system failure. AREE breaks that trend by exploring what can be done with only a few basic scientific measurements, but recorded over long periods of time. In addition to Venus, the concept can be useful in other extreme environments in the solar system including Mercury, Jupiter's radiation belts, the interiors of gas giants, the mantle of the Earth and volcanoes throughout the solar system.

Parness, Aaron↗

NASA NTRS2014

Zephyr: A Landsailing Rover for Venus

With an average temperature of 450C and a corrosive atmosphere at a pressure of 90 bars, the surface of Venus is the most hostile environment of any planetary surface in the solar system. Exploring the surface of Venus would be an exciting goal, since Venus is a planet with significant scientific mysteries, and interesting geology and geophysics. Technology to operate at the environmental conditions of Venus is under development. A rover on the surface of Venus with capability comparable to the rovers that have been sent to Mars would push the limits of technology in high-temperature electronics, robotics, and robust systems. Such a rover would require the ability to traverse the landscape on extremely low power levels. We have analyzed an innovative concept for a planetary rover: a sail-propelled rover to explore the surface of Venus. Such a rover can be implemented with only two moving parts; the sail, and the steering. Although the surface wind speeds are low (under 1 m/s), at Venus atmospheric density even low wind speeds develop significant force. Under funding by the NASA Innovative Advanced Concepts office, a conceptual design for such a rover has been done. Total landed mass of the system is 265 kg, somewhat less than that of the MER rovers, with a 12 square meter rigid sail. The rover folds into a 3.6 meter aeroshell for entry into the Venus atmosphere and subsequent parachute landing on the surface. Conceptual designs for a set of hightemperature scientific instruments and a UHF communication system were done. The mission design lifetime is 50 days, allowing operation during the sunlit portion of one Venus day. Although some technology development is needed to bring the high-temperature electronics to operational readiness, the study showed that such a mobility approach is feasible, and no major difficulties are seen.

rover↗

NASA NTRS2021

Changes in TOA SW Fluxes over Marine Clouds When Estimated via Semiphysical Angular Distribution Models

Top-of-atmosphere (TOA) shortwave (SW) angular distribution models (ADMs) approximate—per angular direction of an imagined upward hemisphere—the intensity of sunlight scattered back from a specific Earth–atmosphere scene. ADMs are, thus, critical when converting satellite-borne broadband radiometry into estimated radiative fluxes. This paper applies a set of newly developed ADMs with a more refined scene definition and demonstrates tenable changes in estimated fluxes compared to currently operational ADMs. Newly developed ADMs use a semiphysical framework to consider cloud-top effective radius (¯¯R_e) and above-cloud water vapor (ACWV), in addition to accounting for surface wind speed and clouds’ phase, fraction, and optical depth. In effect, instantaneous TOA SW fluxes for marine liquid-phase clouds had the largest flux differences (of up to 25 W m−2) for lower solar zenith angles and cloud optical depth greater than 10 due to extremes in ¯¯R_e or ACWV. In regions where clouds had persistently extreme levels of ¯¯R_e (here mostly for ¯¯R_e < 7μm and ¯¯R_e > 15μm) or ACWV, instantaneous fluxes estimated from Aqua, Terra, Meteosat-8, and Meteosat-9 satellites using the two ADMs differed systematically, resulting in significant deviations in daily mean fluxes (up to ±10 W m^(−2)) and monthly mean fluxes (up to ±5 W m^(−2)). Flux estimates using newly developed, semiphysical ADMs may contribute to a better understanding of solar fluxes over low-level clouds. It remains to be seen whether aerosol indirect effects are impacted by these updates.

angular distribution models (ADMs)↗

NASA NTRS2013

A Major Solar Eruptive Event in July 2012: Defining Extreme Space Weather Scenarios

A key goal for space weather studies is to define severe and extreme conditions that might plausibly afflict human technology. On 23 July 2012, solar active region 1520 (approx. 141 deg W heliographic longitude) gave rise to a powerful coronal mass ejection (CME) with an initial speed that was determined to be 2500+/-500 km/s. The eruption was directed away from Earth toward 125 deg W longitude. STEREO-A sensors detected the CME arrival only about 19 h later and made in situ measurements of the solar wind and interplanetary magnetic field. In this paper, we address the question of what would have happened if this powerful interplanetary event had been Earthward directed. Using a well-proven geomagnetic storm forecast model, we find that the 23-24 July event would certainly have produced a geomagnetic storm that was comparable to the largest events of the twentieth century (Dst approx. - 500 nT). Using plausible assumptions about seasonal and time-of-day orientation of the Earth's magnetic dipole, the most extreme modeled value of storm-time disturbance would have been Dst= - 1182 nT. This is considerably larger than estimates for the famous Carrington storm of 1859. This finding has far reaching implications because it demonstrates that extreme space weather conditions such as those during March of 1989 or September of 1859 can happen even during a modest solar activity cycle such as the one presently underway. We argue that this extreme event should immediately be employed by the space weather community to model severe space weather effects on technological systems such as the electric power grid.

solar longitude↗

NASA NTRS1947

Fundamental Aerodynamic Investigations for Development of Arrow-Stabilized Projectiles

The numerous patent applications on arrow-stabilized projectiles indicate that the idea of projectiles without spin is not new, but has appeared in various proposals throughout the last decades. As far as projectiles for subsonic speeds are concerned, suitable shapes have been developed for sometime, for example, numerous grenades. Most of the patent applications, though, are not practicable particularly for projectiles with supersonic speed. This is because the inventor usually does not have any knowledge of aerodynamic flow around the projectile nor any particular understanding of the practical solution. The lack of wind tunnels for the development of projectiles made it necessary to use firing tests for development. These are obviously extremely tedious or expensive and lead almost always to failures. The often expressed opinion that arrow-stabilized projectiles cannot fly supersonically can be traced to this condition. That this is not the case has been shown for the first time by Roechling on long projectiles with foldable fins. Since no aerodynamic investigations were made for the development of these projectiles, only tedious series of firing tests with systematic variation of the fins could lead to satisfactory results. These particular projectiles though have a disadvantage which lies in the nature cf foldable fins. They occasionally do not open uniformly in flight, thus causing unsymmetry in flow and greater scatter. The junctions of fins and body are very bad aerodynamically and increase the drag. It must be possible to develop high-performance arrow-stabilized projectiles based on the aerodynamic research conducted during the last few years at Peenemuende and new construction ideas. Thus the final shape, ready for operational use, could be developed in the wind tunnel without loss of expensive time in firing tests. The principle of arrow-stabilized performance has been applied to a large number of caliburs which were stabilized by various means Most promising was the development of a subcaliber wing-stabilized projectile with driving disc (Treibspiegel) where rigid control surfaces extend beyond the caliber of the projectile into the free stream. The stabilized projectiles of full-caliber, wing-stabilized projectiles with fins within the caliber is considerably more difficult. A completely satisfactory solution for the latter has not been found yet.

Kurzweg, Hermann↗

NASA NTRS1959

A Wind-Tunnel Investigation of Rotor Behavior Under Extreme Operating Conditions with a Description of Blade Oscillations Attributed to Pitch-Lag Coupling

A wind-tunnel investigation was made to study the behavior of a model helicopter rotor under extreme operating conditions. A 1/8-scale model of the front rotor of a tandem helicopter was built and tested to obtaining blade motion and rotor aerodynamic characteristics for conditions that could be encountered in high-speed pullout maneuvers. The data are presented without analysis. A description is given in an appendix of blade oscillations that were experienced during the course of the investigation and of the part that blade pitch-lag coupling played in contributing to the oscillatory condition.

McKee, John W.↗

NASA NTRS2012

Counteracting Rotor Imbalance in a Bearingless Motor System with Feedforward Control

In standard motor applications, traditional mechanical bearings represent the most economical approach to rotor suspension. However, in certain high performance applications, rotor suspension without bearing contact is either required or highly beneficial. Such applications include very high speed, extreme environment, or limited maintenance access applications. This paper extends upon a novel bearingless motor concept, in which full five-axis levitation and rotation of the rotor is achieved using two motors with opposing conical air-gaps. By leaving the motors' pole-pairs unconnected, different d-axis flux in each pole-pair is created, generating a flux imbalance which creates lateral force. Note this is approach is different than that used in previous bearingless motors, which use separate windings for levitation and rotation. This paper will examine the use of feedforward control to counteract synchronous whirl caused by rotor imbalance. Experimental results will be presented showing the performance of a prototype bearingless system, which was sized for a high speed flywheel energy storage application, with and without feedforward control.

Bearingless Motor↗

NASA NTRS1982

In-flight propeller flow visualization using fluorescent minitufts

Extension of fluorescent minutuft method to in-flight flow visualization on propellers is described. Extremely thin nylon monofilament for the minitufts, is used in a process of attaching them to the test surface with small drops of lacquer-like adhesive, and the use of fluorescence photography for recording the minituft patterns. Using this method, thousands of minitufts can be applied to small, high speed wind tunnel models without affecting the airflow. The minitufts can remain in place throughout a wind tunnel test, permitting nonintrusive flow visualization data to be acquired at any time.

Crowder, J. P.↗

NASA NTRS2016

The Accretion Disk Wind in the Black Hole GRS 1915 + 105

We report on a 120 kiloseconds Chandra/HETG spectrum of the black hole GRS 1915+105. The observation was made during an extended and bright soft state in 2015 June. An extremely rich disk wind absorption spectrum is detected, similar to that observed at lower sensitivity in 2007. The very high resolution of the third-order spectrum reveals four components to the disk wind in the Fe K band alone; the fastest has a blueshift of v = 0.03 c (velocity equals 0.03 the speed of light). Broadened reemission from the wind is also detected in the first-order spectrum, giving rise to clear accretion disk P Cygni profiles. Dynamical modeling of the re-emission spectrum gives wind launching radii of r approximately equal to 10 (sup 2-4) GM (Gravitational constant times Mass) divided by c (sup 2) (the speed of light squared). Wind density values of n approximately equal to 10 (sup 13-16) per cubic centimeter are then required by the ionization parameter formalism. The small launching radii, high density values, and inferred high mass outflow rates signal a role for magnetic driving. With simple, reasonable assumptions, the wind properties constrain the magnitude of the emergent magnetic field to be B approximately equal to 10 (sup 3-4) G (Gravitational constant) if the wind is driven via magnetohydrodynamic (MHD) pressure from within the disk and B approximately equal to 10 (sup 4-5) G (Gravitational constant) if the wind is driven by magnetocentrifugal acceleration. The MHD estimates are below upper limits predicted by the canonical alpha-disk model. We discuss these results in terms of fundamental disk physics and black hole accretion modes.

accretion↗

NASA NTRS2018

Flood Hazard Assessment from Storm Tides, Rain and Sea Level Rise for a Tidal River Estuary

Cities and towns along the tidal Hudson River are highly vulnerable to flooding through the combination of storm tides and high streamflows, compounded by sea level rise. Here a three-dimensional hydrodynamic model, validated by comparing peak water levels for 76 historical storms, is applied in a probabilistic flood hazard assessment. In simulations, the model merges streamflows and storm tides from tropical cyclones (TCs), offshore extratropical cyclones (ETCs) and inland "wet extratropical" cyclones (WETCs). The climatology of possible ETC and WETC storm events is represented by historical events (1931-2013), and simulations include gauged streamflows and inferred ungauged streamflows (based on watershed area) for the Hudson River and its tributaries. The TC climatology is created using a stochastic statistical model to represent a wider range of storms than is contained in the historical record. TC streamflow hydrographs are simulated for tributaries spaced along the Hudson, modeled as a function of TC attributes (storm track, sea surface temperature, maximum wind speed) using a statistical Bayesian approach. Results show WETCs are important to flood risk in the upper tidal river (e.g., Albany, New York), ETCs are important in the estuary (e.g., New York City) and lower tidal river, and TCs are important at all locations due to their potential for both high surge and extreme rainfall. The raising of floods by sea level rise is shown to be reduced by approximately 30-60 percent at Albany due to the dominance of streamflow for flood risk. This can be explained with simple channel flow dynamics, in which increased depth throughout the river reduces frictional resistance, thereby reducing the water level slope and the upriver water level.

Tidal river↗

NASA NTRS1993

Low Wind Speed Radar Backscatter Measurements at C- and Ku-Band Obtained During the Surface Wave Dynamics Experiment

Radar backscatter measurements collected at both C- and Ku-Band during the recent SurfaceWaves Dynamics Experiment (SWADE) on 1 March 1991 show dramatic variabilities of thenormalized radar cross section (sigma degree) of the ocean surface at low wind speed. Additionally,measurements of the sigma degree in the cross wind direction fluctuated much more than the sigmadegree in the upwind direction. The C- and Ku-band data are quite similar, both exhibiting a morepronounced roll off of sigma degree with decreasing neutral stability wind than indicated bypreviously published empirical model functions. The data show extremely large azimuthalmodulations, in some cases greater than 20 dB, and show good qualitative agreement with theazimuthal modulation predicted.

Carson, S. C.↗