Search NASA⌕ Search

SEARCH · Search NASA

Results for “feature tracking”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

White-light movies of the solar photosphere from the SOUP instrument on Spacelab

Initial results are presented on solar granulation, pores and sunspots from the white-light films obtained by the Solar Optical Universal Polarimeter (SOUP) instrument in Spacelab 2. Several hours of movies were taken at various disk and limb positions in quiet and active regions. The images are diffraction-limited at 0.5 arcsec resolution and are, of course, free of atmospheric seeing and distortion. Properties of the granulation in magnetic and nonmagnetic regions are compared and are found to differ significantly in size, rate of intensity variation, and lifetime. In quiet sun, on the order of fifty-percent of the area has at least one 'exploding granule' occurring in it during a 25-min period. Local correlation tracking has detected several types of transverse flows, including systematic outflow from the penumbral boundary of a spot, motion of penumbral filaments, and cellular flow patterns of supergranular and mesogranular size. Feature tracking has shown that, in the quiet sun, the average granule fragment has a velocity of about one kilometer/second.

Title, A. M.↗

Standardized RGB Composite Imagery for Global Applications

NASA’s MODIS instruments on the Terra and Aqua satellites have been providing imaging capabilities from polar orbit for the last 20 years allowing for twice daily sampling of mesoscale atmospheric features with multispectral or Red, Green, Blue (RGB) composite imagery. With the launch of the next generation of geostationary sensors the capability exists for expanded coverage of RGB imagery with the ability to track features over long distances and study the processes that contribute to the development of fast evolving features. However, the use of RGB imagery on a global basis is not without limitations due to the impact of limb-effects at high viewing angles and subtle spectral channel differences between satellite sensors.

Emily Berndt↗

Microparticle cloud imaging and tracking for data-driven plasma science

Oceans of image and particle track data encountered in plasma interactions with microparticle clouds motivate development and applications of machine-learning (ML) algorithms. A local-constant-velocity tracker, a Kohonen neural network or self-organizing map, the feature tracking kit, and U-Net are described and compared with each other for microparticle cloud datasets generated from exploding wires, dusty plasmas, and atmospheric plasmas. Particle density and the signal-to-noise ratio have been identified as two important factors that affect the tracking accuracy. Fast Fourier transform is used to reveal how U-Net, a deep convolutional neural network developed for non-plasma applications, achieves the improvements for noisy scenes. Viscous effects are revealed in the ballistic motions of the particles from the exploding wires and atmospheric plasmas. Subdiffusion of microparticles satisfying Δr 2 ∝t k (k=0.84±0.02) is obtained from the dusty plasma datasets. Microparticle cloud imaging and tracking, when enhanced with data and ML models, present new possibilities for plasma physics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Investigation of water vapor motion winds from geostationary satellites

Water vapor imagery from geostationary satellites has been available for over a decade. These data are used extensively by operational analysts and forecasters, mainly in a qualitative mode (Weldon and Holmes 1991). In addition to qualitative applications, motions deduced in animated water vapor imagery can be used to infer wind fields in cloudless regimes, thereby augmenting the information provided by cloud-drift wind vectors. Early attempts at quantifying the data by tracking features in water vapor imagery met with modest success (Stewart et al. 1985; Hayden and Stewart 1987). More recently, automated techniques have been developed and refined, and have resulted in upper-level wind observations comparable in quality to current operational cloud-tracked winds (Laurent 1993). In a recent study by Velden et al. (1993) it was demonstrated that wind sets derived from Meteosat-3 (M-3) water vapor imagery can provide important environmental wind information in data void areas surrounding tropical cyclones, and can positively impact objective track forecasts. M-3 was repositioned to 75W by the European Space Agency in 1992 in order to provide complete coverage of the Atlantic Ocean. Data from this satellite are being transmitted to the U.S. for operational use. Compared with the current GOES-7 (G-7) satellite (positioned near 112W), the M-3 water vapor channel contains a superior horizontal resolution (5 km vs. 16 km ). In this paper, we examine wind sets derived using automated procedures from both GOES-7 and Meteosat-3 full disk water vapor imagery in order to assess this data as a potentially important source of large-scale wind information. As part of a product demonstration wind sets were produced twice a day at CIMSS during a six-week period in March and April (1994). These data sets are assessed in terms of geographic coverage, statistical accuracy, and meteorological impact through preliminary results of numerical model forecast studies.

Velden, Christopher S.↗

Stratospheric Instrusion Catalog: A 10-Year Compilation of Events Identified by using TRACK with NASA's MERRA-2 Reanalysis

Stratospheric intrusions "the introduction of ozone-rich stratospheric air into the troposphere" have been linked with surface ozone air quality exceedances, especially at the high elevations in the western USA in springtime. However, the impact of stratospheric intrusions in the remaining seasons and over the rest of the USA is less clear. A new approach to the study of stratospheric intrusions uses NASA's Goddard Earth Observing System Model (GEOS) model and assimilation products with an objective feature tracking algorithm to investigate the atmospheric dynamics that generate stratospheric intrusions and the different mechanisms through which stratospheric intrusions may influence tropospheric chemistry and surface air quality seasonally over both the western and the eastern USA. A catalog of stratospheric intrusions identified in the MERRA-2 reanalysis was produced for the period 2004-2015 and validated against surface ozone observations (focusing on those which exceed the national air quality standard) and a recent data set of stratospheric intrusion-influenced air quality exceedance flags from the US Environmental Protection Agency (EPA). Considering not all ozone exceedances have been flagged by the EPA, a collection of stratospheric intrusions can support air quality agencies for more rapid identification of the impact of stratospheric air on surface ozone and demonstrates that future operational analyses may aid in forecasting such events. An analysis of the spatiotemporal variability of stratospheric intrusions over the continental US was performed, and while the spring over the western USA does exhibit the largest number of stratospheric intrusions affecting the lower troposphere, the number of intrusions in the remaining seasons and over the eastern USA is sizable. By focusing on the major modes of variability that influence weather in the USA, such as the Pacific North American (PNA) teleconnection index, predicative meteorological patterns associated with stratospheric intrusions and their regional effects on tropospheric ozone were identified. Improved understanding of the connections between large-scale climate variability and local-scale dynamically-driven air quality events may support improved seasonal prediction of such events.

PN↗

High-speed x-ray phase contrast imaging and digital image correlation analysis of microscale shock response of an additively manufactured energetic material simulant

The performance of energetic materials subjected to dynamic loading significantly depends on their micro- and meso-scale structural morphology. The geometric versatility offered by additive manufacturing opens new pathways to tailor the performance of these materials. Additively manufactured energetic materials (AMEMs) have a wide range of structural characteristics with a hierarchy of length scales and process-inherent heterogeneities, which are hitherto difficult to precisely control. It is important to understand how these features affect AMEMs’ response under dynamic/shock loading. Therefore, temporally and spatially resolved measurements of both macroscopic behavior and micro- and meso-level processes influencing macroscopic behavior are required. In this paper, we analyze the shock compression response of an AMEM simulant loaded under several impact conditions and orientations. Furthermore, x-ray phase contrast imaging (PCI) is used to track features across the observed shock front and determine the linear shock velocity vs particle velocity equation of state, as well as to quantify the interior deformation fields via digital image correlation (DIC) analyses. Photon Doppler velocimetry is simultaneously used to measure the particle velocities of the specimens, which are consistent with those obtained from x-ray PCI. The DIC analyses provide an assessment of the average strain fields inside the material, showing that the average axial strain depends on the loading intensity and reaches as high as 0.23 for impact velocities up to 1.5 km/s. The overall results demonstrate the utility of x-ray PCI for probing “in-material” equation of state and interior strains associated with dynamic shock compression behavior of the AMEM simulant.

3D printing↗

Tracking motions from satellite water vapor imagery: Quantitative applications to hurricane track forecasting

Water vapor imagery from GOES satellites has been available for over a decade. These data are used extensively, mainly in a qualitative mode, by forecasters in the United States (Weldon and Holmes, 1991). Some attempts have been made at quantifying the data by tracking features in time sequences of the imagery (Stewart et al., 1985; Hayden and Stewart, 1987). For a variety of reasons, applications of this approach have produced marginal results (Velden, 1990). Recently, METEOSAT-3 (M-3) was repositioned at 50W by the European Space Agency, in order to provide complete coverage of the Atlantic Ocean. Data from this satellite are being transmitted to the U.S. for operational use. Compared with the GOES satellite, the M-3 has a superior resolution and signal-to-noise ratio in its water vapor channel, which translates into improved automated tracking capabilities. During a period in 1992 which included the Atlantic hurricane season, water vapor tracking algorithms were applied to the M-3 data in order to evaluate the coverage, accuracy and model impact of the derived vectors. Data sets were produced during several tropical cyclone cases, including Hurricane Andrew. In this paper, the M-3 water vapor wind sets are assessed, and their impact on a hurricane track forecast model is examined.

Velden, Christopher↗

Detecting vortices in superconductors: Extracting one-dimensional topological singularities from a discretized complex scalar field

In type II superconductors, the dynamics of superconducting vortices determine their transport properties. In the Ginzburg-Landau theory, vortices correspond to topological defects in the complex order parameter. Extracting their precise positions and motion from discretized numerical simulation data is an important, but challenging, task. In the past, vortices have mostly been detected by analyzing the magnitude of the complex scalar field representing the order parameter and visualized by corresponding contour plots and isosurfaces. However, these methods, primarily used for small-scale simulations, blur the fine details of the vortices, scale poorly to large-scale simulations, and do not easily enable isolating and tracking individual vortices. In this paper, we present a method for exactly finding the vortex core lines from a complex order parameter field. With this method, vortices can be easily described at a resolution even finer than the mesh itself. The precise determination of the vortex cores allows the interplay of the vortices inside a model superconductor to be visualized in higher resolution than has previously been possible. Finally, by representing the field as the set of vortices, this method also massively reduces the data footprint of the simulations and provides the data structures for further analysis and feature tracking.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Neural network tracking and extension of positive tracking periods

Feature detectors have been considered for the role of supplying additional information to a neural network tracker. The feature detector focuses on areas of the image with significant information. Basically, if a picture says a thousand words, the feature detectors are looking for the key phrases (keypoints). These keypoints are rotationally invariant and may be matched across frames. Application of these advanced feature detectors to the neural network tracking system at JPL has promising potential. As part of an ongoing program, an advanced feature detector was tested for augmentation of a neural network based tracker. The advance feature detector extended tracking periods in test sequences including aircraft tracking, rover tracking, and simulated Martian landing. Future directions of research are also discussed.

feature extraction↗

Interferometric Radar Observations of Glaciar San Rafael, Chile

Interferometric radar observations of Glaciar San Rafael, Chile, were collected in October 1994 by NASA's Spaceborne Imaging Radar C (SIR-C) at both L- (24cm) and C-band frequency (5.6cm), with vertical transmit and receive polarization. The C-band data did not yield good geophysical products, because the temporal coherence of the signal was significantly reduced after 24h. The L-band data were, however, successfully employed to map the surface topography of the icefield with a 10m uncertainty in height, and measure ice velocity with a precision of 4 mm/d or 1.4 m/a. The corresponding error in strain rates is 0.05/a at a 30 m horizontal spacing. The one-dimensional interferometric velocities were subsequently converted to horizontal displacements by assuming a flow direction and complemented by feature-tracking results near the calving front. The results provide a comprehensive view of the ice-flow dynamics of Glaciar San Rafael. The glacier has a core of rapid flow, 4.5 km in width and 3.5 degrees in average slope,surrounded by slower moving ice, not by rock. Ice velocity is 2.6 m/d or 0.95 km/a near the equilibrium line altitude (1200m), increasing rapidly before the glacier enters the narrower terminal valley, to reach 17.5 m/d or 6.4 km/a at the calving front. Strain rates are dominated by lateral shearing at the glacier margins (0.4-0.7/a), except for the terminal-valley section, where longitudinal strain rates average close to 1/a. This spectacular longitudinal increase in ice velocity in the last few kilometers may be a fundamental feature of tidewater glaciers.

Rignot, Eric↗

Vision-guided gripping of a cylinder

The motivation for vision-guided servoing is taken from tasks in automated or telerobotic space assembly and construction. Vision-guided servoing requires the ability to perform rapid pose estimates and provide predictive feature tracking. Monocular information from a gripper-mounted camera is used to servo the gripper to grasp a cylinder. The procedure is divided into recognition and servo phases. The recognition stage verifies the presence of a cylinder in the camera field of view. Then an initial pose estimate is computed and uncluttered scan regions are selected. The servo phase processes only the selected scan regions of the image. Given the knowledge, from the recognition phase, that there is a cylinder in the image and knowing the radius of the cylinder, 4 of the 6 pose parameters can be estimated with minimal computation. The relative motion of the cylinder is obtained by using the current pose and prior pose estimates. The motion information is then used to generate a predictive feature-based trajectory for the path of the gripper.

Nicewarner, Keith E.↗

Tropopause and lower stratosphere winds and eddy fluxes on Saturn as seen by Cassini imaging

An automated cloud feature tracking algorithm is applied to 2004 Cassini Imaging Science Subsystem images of Saturn's southern hemisphere and equatorial region (5°N-70°S) in continuum, methane band, and ultraviolet filters to derive zonal wind profiles and eddy momentum fluxes from the middle troposphere cloud tops to the lower stratosphere. Zonal winds in the eastward and westward jets decrease in strength from the cloud tops (≳ 1 bar) to the upper troposphere (~60–600 mb), but do not measurably change in strength from the upper troposphere to the tropopause (~60 mb) to the lower stratosphere (≲ 60 mb). A narrow (~3°N-3°S) equatorial jet is detected at the cloud tops, but a previously reported strengthening of this jet from the cloud top level to the upper troposphere/tropopause region cannot be verified due to an absence of easily trackable features at the equator and conflicting results for the few features available. Eddy momentum fluxes on either side of the jet cores outside the tropics (poleward of ~20°S) converge into the eastward jets and diverge from the westward jets. Whether the flux convergence into the eastward jets weakens from the visible cloud level to the upper troposphere cannot be determined for this limited time period, but the eddy convergence appears to increase from the troposphere to the lower stratosphere. The divergence of the eddy flux from the westward jets seems to more clearly increase from the middle to the upper troposphere to the stratosphere, but this does not explain the slight weakening of the westward jets with height.

Saturn↗

Automated Storm Tracking and the Lightning Jump Algorithm Using GOES-R Geostationary Lightning Mapper (GLM) Proxy Data

This study develops a fully automated lightning jump system encompassing objective storm tracking, Geostationary Lightning Mapper proxy data, and the lightning jump algorithm (LJA), which are important elements in the transition of the LJA concept from a research to an operational based algorithm. Storm cluster tracking is based on a product created from the combination of a radar parameter (vertically integrated liquid, VIL), and lightning information (flash rate density). Evaluations showed that the spatial scale of tracked features or storm clusters had a large impact on the lightning jump system performance, where increasing spatial scale size resulted in decreased dynamic range of the system's performance. This framework will also serve as a means to refine the LJA itself to enhance its operational applicability. Parameters within the system are isolated and the system's performance is evaluated with adjustments to parameter sensitivity. The system's performance is evaluated using the probability of detection (POD) and false alarm ratio (FAR) statistics. Of the algorithm parameters tested, sigma-level (metric of lightning jump strength) and flash rate threshold influenced the system's performance the most. Finally, verification methodologies are investigated. It is discovered that minor changes in verification methodology can dramatically impact the evaluation of the lightning jump system.

lightning jump↗

Advanced Imaging of the Left Atrium with Cardiac Magnetic Resonance: A Review of Current and Emerging Methods and Clinical Applications

Purpose of Review: The thin wall of the left atrium (LA) is difficult to visualize. The high spatial and temporal resolution of cardiac magnetic resonance (CMR) allows for the most accurate assessment of left atrial structure, function, and tissue characterization. This review will describe emerging methods used to image the LA with CMR, and will discuss associated clinical applications. Recent Findings: LA function can now be described in a dynamic fashion with feature-tracking algorithms. Novel methods have been created to augment visualization of late gadolinium enhancement (LGE) in the LA, and left atrial fibrosis can be further quantified with T1 mapping algorithms. The advancement in how we image the LA with CMR has implications in atrial fibrillation (AF) and cardiomyopathic processes. Summary: A nuanced understanding of left atrial pathology is emerging with the rapid advancement of CMR technology, which has implications in the risk stratification and treatment of several cardiovascular disease states.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Experimental Modal Analysis Using Phase Quantities from Phase-Based Motion Processing and Motion Magnification

Phase-based motion processing and the associated Motion Magnification that it enables has become popular not only for the striking videos that it can produce of traditionally stiff structures visualized with very large deflections, but also for its ability to pull information out of the noise floor of images so that they can be processed with more traditional optical techniques such as digital image correlation or feature tracking. While the majority of papers in the literature have utilized the Phase-based Image Processing approach as a pre-processor for more quantitative analyses, the technique itself can be used directly to extract modal parameters from an image, noting that the extracted phases are proportional to displacements in the image. Therefore, once phases are extracted, they can be fit using traditional experimental modal analysis techniques. This produces a mode “shape” where the degrees of freedom are phases instead of physical motions. These phases can be scaled to produce on-image visualizations of the mode shapes, rather than operational shapes produced by bandpass filtering. Modal filtering techniques can also be used to visualize motions from an environment on an image using the modal phases as a basis for the expansion.

47 OTHER INSTRUMENTATION↗

Avalanche gain and its effect on energy resolution in GEM-based detectors

Here, we present avalanche gain and associated resolution measurements recorded with a 4 He:CO 2 (70:30) gas mixture and pure SF 6 , a Negative Ion (NI) gas. SF 6 is of particular interest to the directional dark matter detection community, as its low thermal diffusion helps to retain recoil ionization track features over long drift lengths. With the aid of a general form of the reduced first Townsend coefficient (RFTC), multiple GEM-based detector data sets are used to study the high-gain behavior of the 4 He:CO 2 gas mixture. The high-gain data is well described purely in terms of the reduced electric field strength and the number of GEMs, and the robust relationship between the RFTC and the average, reduced, electric field strength across the GEMs is emphasized. The associated (pulse-height) resolution measurements are used to discuss the variance of the avalanche distribution and to describe and estimate the lower limits of energy resolution one should expect to measure using a simple relationship with the RFTC. In the end, a description of avalanche gain, its effect on energy resolution, and the contributing experimental parameters in GEM-based detectors is developed over a broad parameter space for further use.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Impacts of Large-Scale Urbanization and Irrigation on Summer Precipitation in the Mid-Atlantic Region of the United States

This study investigates how urbanization and irrigation in the United States east of the Rocky Mountains affect summer precipitation in the Mid-Atlantic region (MAR) using convection-permitting Weather Research and Forecasting model simulations with/without urbanization or irrigation. In this work, a feature tracking algorithm is used to identify precipitation from mesoscale convective systems (MCSs), isolated deep convection (IDC), and non-convective systems (NC). Overall, urbanization suppresses all three types of precipitation in the MAR by reducing water vapor content and convective available potential energy, while irrigation enhances IDC and NC precipitation but suppresses MCS precipitation. Examination of the MCS and IDC initiation locations indicates that irrigation suppresses MAR precipitation that is produced by MCSs initiated in the Great Plains and Midwest (GP) but enhances MAR precipitation from MCSs initiated locally within the region. Irrigation induces a mid-level cyclonic circulation anomaly centering in the Southeast, hindering the eastward propagation and development of MCSs from the GP.

54 ENVIRONMENTAL SCIENCES↗

The role of subsurface flows in solar surface convection: modeling the spectrum of supergranular and larger scale flows

We model the solar horizontal velocity power spectrum at scales larger than granulation using a two-component approximation to the mass continuity equation. The model takes four times the density scale height as the integral (driving) scale of the vertical motions at each depth. Scales larger than this decay with height from the deeper layers. Those smaller are assumed to follow a Kolmogorov turbulent cascade, with the total power in the vertical convective motions matching that required to transport the solar luminosity in a mixing length formulation. These model components are validated using large-scale radiative hydrodynamic simulations. We reach two primary conclusions. (1) The model predicts significantly more power at low wavenumbers than is observed in the solar photospheric horizontal velocity spectrum. (2) Ionization plays a minor role in shaping the observed solar velocity spectrum by reducing convective amplitudes in the regions of partial helium ionization. The excess low wavenumber power is also seen in the fully nonlinear three-dimensional radiative hydrodynamic simulations employing a realistic equation of state. This adds to other recent evidence suggesting that the amplitudes of large-scale convective motions in the Sun are significantly lower than expected. Employing the same feature tracking algorithm used with observational data on the simulation output, we show that the observed low wavenumber power can be reproduced in hydrodynamic models if the amplitudes of large-scale modes in the deep layers are artificially reduced. Since the large-scale modes have reduced amplitudes, modes on the scale of supergranulation and smaller remain important to convective heat flux even in the deep layers, suggesting that small-scale convective correlations are maintained through the bulk of the solar convection zone.

79 ASTRONOMY AND ASTROPHYSICS↗