SEARCH · Search NASA

Results for “feldspar”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

All sources NASA NTRS DOE OSTI

NASA NTRS1973

Electron Microprobe Analyses of Lithic Fragments and Their Minerals from Luna 20 Fines

The bulk analyses (determined with the broad beam electron microprobe technique) of lithic fragments are given in weight percentages and are arranged according to the rock classification. Within each rock group the analyses are arranged in order of increasing FeO content. Thin section and lithic fragment numbers are given at the top of each column of analysis and correspond to the numbers recorded on photo mosaics on file in the Institute of Meteoritics. CIPW molecular norms are given for each analysis. Electron microprobe mineral analyses (given in oxide weight percentages), structural formulae and molecular end member values are presented for plagioclase, olivine, pyroxene and K-feldspar. The minerals are selected mostly from lithic fragments that were also analyzed for bulk composition. Within each mineral group the analyses are presented according to the section number and lithic fragment number. Within each lithic fragment the mineral analyses are arranged as follows: Plagioclase in order of increasing CaO; olivine and pyroexene in order of increasing FeO; and K-feldspar in order of increasing K2O. The mineral grains are identified at the top of each column of analysis by grain number and lithic fragment number.

Conrad, G. H.↗

NASA NTRS1975

Experimental shock metamorphism of maximum microcline

A series of recovery experiments are conducted to study the behavior of single-crystal perthitic maximum microcline shock-loaded to a peak pressure of 417 kbar. Microcline is found to deform in a manner similar to quartz and other alkali feldspars. It is observed that shock-induced cleavages occur initially at or slightly below the Hugoniot elastic limit (60-85 kbar), that shock-induced rather than thermal disordering begins above the Hugoniot elastic limit, and that all types of planar elements form parallel to crystallographic planes of low Miller indices. When increasing pressure, it is found that bulk density, refractive indices, and birefringence of the recovered material decrease and approach diaplectic glass values, whereas disappearance and weakening of reflections in Debye-Sherrer patterns are due to disordering of the feldspar lattice.

Robertson, P. B.↗

NASA NTRS1974

Early active sun - Radiation history of distinct components in fines

Plagioclase feldspars were separated from lunar soil samples and their compositions were determined by electron-microprobe analysis followed by etching and track counting in an effort to find effects of early solar activity. The feldspars were assigned on this basis to three major lithologies: mare basalts, anorthositic rocks, and KREEP rock. The results are in sharp contrast to Poupeau et al.'s (1973) observations on track densities in plagioclase crystals in the Luna 16 soil: no evidence is found for an early active sun, although the evidence does not preclude this possibility, either.

Crozaz, G.↗

NASA NTRS1976

Melting behavior and phase relations of lunar samples

An attempt was made to show that feldspar would float during melting. Large anorthite crystals were placed beneath a silicate glass representative of liquid in which plagioclase accumulation is thought to have occurred. In less than 3 hours at 1,300 C, the crystals rose to the top in a Pt crucible 3 cm deep equilibrated in air and in a Mo crucible 1.5 cm deep equilibrated in an H2/CO2 gas stream of log PO2 = -10.9 (below Fe/FeO). These results suggest that lunar crustal formation by feldspar flotation is possible without special recourse to differential sinking of plagioclase versus mafic minerals or selective elutriation of plagioclase.

Hays, J. F.↗

NASA NTRS1978

Lunar mare versus terrestrial mid-ocean ridge basalts - Planetary constraints on basaltic volcanism

Major differences which exist between terrestrial midocean ridge basalts (MORBs) and lunar mare basalts reflect the different planetary characteristics of earth and moon. MORBs are enriched in aluminum and have higher Mg/(Mg + Fe(2+)). These features reflect a more aluminum- and magnesium-rich mantle source for MORBs. Mare basalts are depleted in sodium and potassium relative to MORBs and, consequently, mare feldspars are depleted in the albite component relative to MORB feldspars; these features are a reflection of the alkali-depleted nature of the moon relative to earth. The oxygen fugacities that obtained during MORB petrogenesis follow the quartz-magnetite-fayalite buffer curve very closely, while those of mare basalts are several orders of magnitude lower. This results in reduced valence states for Fe, Cr, and Ti in mare basalts, which, in turn, has a significant effect on mineral-melt partitioning.

Papike, J. J.↗

NASA NTRS1978

Microcrater and solar-flare track maturation of the lunar regolith

The microcrater, pancake and cosmic ray track record in the 100-200 microns feldspar fraction of a variety of surface soils and Apollo and Luna 16-24 cores have been studied. In Luna 24, a study of the glassy agglutinates plus breccias in 9 levels revealed this core was deposited as discrete layers, most of which are immature. Luna 16 and 20 cores were found respectively mature and immature. Glassy agglutinates and impact microcraters, absent to rare in immature soils such as 12033 and 14141, are present in similar abundances on crystals from submature to mature soils. In submature and mature soils, pancakes are present on 60 to 100 percent of crystals and craters on 50 to 70 percent. Microcrater, track and solar wind gas data suggest feldspar crystals in the size range considered reach an equilibrium maturity grade faster than bulk soils. This is interpreted as due to the limited lifetime of these crystals in the lunar regolith.

Poupeau, G.↗

NASA NTRS1978

Mid infrared spectra of lunar and analog soils

The mid infrared emittance spectrum contains compositional information about lunar soils. In order to be able to properly interpret remotely obtained data, it was necessary to develop a theoretical model of the emittance of particulate minerals. This theory was shown to simulate the spectra of analog lunar soils satisfactorily provided that good values of the optical constants of the component minerals were available. Optical constants have been obtained for dunite, bytownite, augite, ilmenite, and a mare glass analog during this work. Our first measurements on lunar soils indicated that 67711 is very immature (high contrast) and is dominated by feldspar; that 10084 shows very low contrast with some evidence of pyroxene and feldspar bands. 71061 is intermediate between the other two having a gross similarity to 10084 but with considerably more contrast.

Aronson, J. R.↗

NASA NTRS1982

The Apollo 14 regolith - Petrology of cores 14210/14211 and 14220 and soils 14141, 14148, and 14149

New modal data are presented for continuous polished thin sections from double drive tube 14210/14211, and single drive tube 14220, and for polished grain mounts of four soils from the double drive tube, one from the single drive tube, and the soils 14148 (trench top), 14149 (trench bottom), and 14141 (Cone Crater). Modal data show that the Cone Crater soil is immature, whereas the 'smooth plains' soils are mature and rich in agglutinates and breccias. Neither core exhibits any major variations with depth. Microprobe analyses of mineral and glass fragments are consistent with derivation of the soils predominantly from the local rocks, with about 5-11% exotic mare component indicated by the modal data. About 4% of the glasses are SiO2- and K2O-rich granitic glasses which are comminuted mesostasis from the local melt rocks. The soils are depleted in feldspar relative to the source rocks. The preferred explanation for this depletion is that feldspar is concentrated in the less than 10 microns fines and is consumed in the formation of agglutinates, regolith breccias, and feldspathic glass.

Simon, S. B.↗

NASA NTRS1985

Near-infrared spectroscopy of probable impact melt from three large lunar highland craters

Near IR terrestrial telescope data are used to compare the composition of small areas in three large lunar highland craters, whose walls and central peaks yield spectra indicative of crystalline components encompassing olivine, two types of pyroxene, and occasionally Fe-bearing feldspar. Spectra from other crater wall and floor areas suspected of being impact melt deposits yield similar yet anomalous features which are interpreted as indications of pyroxene, Fe-bearing glass, and Fe-bearing feldspar.

Smrekar, S.↗

NASA NTRS1986

Thermoluminescence and the shock and reheating history of meteorites. III - The shergottites

Thermoluminescence (TL) measurements on Shergotty, ALHA 77005, Zagami, and EETA 79001 (lithology A) have been used to obtain further information on the shock history of these meteorites. The level of TL sensitivity in the shergottites varied by a factor of 10, but was always low, probably reflecting the amount of crystalline material in the maskelynite. There are trends in the TL peak temperature, peak width, and TL sensitivity which are believed to be associated with different proportions of feldspar in high- and low-temperature forms. This interpretation is consistent with the observed changes induced in the TL properties by annealing shergottites at 400-900 C. It is suggested that the observed trends were produced during postshock crystallization at a variety of cooling rates, the increasing order of cooling rate being EETA 79001, Zagami, ALHA 77005, and Shergotty, and that there is high-temperature feldspar present in all the samples. This implies a postshock temperature above 600 C, and a small (less than 10 m) size of the ejecta. Current theories are well able to explain how objects of this size could have been ejected from Mars.

Hasan, F. A.↗

NASA NTRS1987

Preliminary results of spectral reflectance studies of tycho crater

The preliminary analysis and interpretation of near infrared spectra obtained for both the interior and exterior deposits associated with the Tycho crater is presented. Specific objectives were: (1) to determine the composition and stratigraphy of the highland crust in the Tycho target site; (2) to determine the likely composition of the primary ejecta which may be present in ray deposits; (3) to investigate the nature of spectral units defined in previous studies; (4) to further investigate the nature and origin of both the bright and dark haloes around the rim crest; and (5) to compare the compositions determined for the Tycho units with those of the Aristarchus crater as well as typical highland deposits. The spectra obtained for the interior areas exhibit similar spectral features. These include relatively strong 1 micron absorption bands whose minima are centered between 0.97 and 0.99 microns and shallow to intermediate continuum slopes. The spectra generally exhibit indications of a 1.3 micron feature consistent with the presence of Fe(2+) bearing plagioclase feldspar. The strong 1 micron absorption features indicate a dominant high Ca clinopyroxene component. Results obtained from the ejecta deposits show that the spectrum of the inner, bright halo is almost identical with those obtained for interior units. The spectrum of the dark halo exhibits a wide, relatively shallow absorption feature centered at 1.01 microns, a 1.3 micron absorption, and a steep continuum slope. This spectrum is interpreted as indicating the presence of pyroxene, Fe-bearing feldspar, and a significant component of Fe-bearing impact melt glass. Finally, the spectra of spots inside Tycho show similarity with certain spectra for Aristarchus. However, the suite of spectra obtained for Tycho exhibits a different trend in terms of band center versus width.

Hawke, B. R.↗

NASA NTRS1986

The thermoluminescence sensitivity-metamorphism relationship in ordinary chondrites - Experimental data on the mechanism and implications for terrestrial systems

Hydrothermal annealing experiments have been performed on samples of the Sharps meteorite in order to investigate the mechanism responsible for the metamorphism-related, 10-to-the-5th-fold range in the thermoluminescence (TL) sensitivity in ordinary chondrites. Duplicate 50 mg samples of meteorite were annealed under the following conditions: (1) 168 h at 785 C and 1 kbar; (2) the same time, temperature and pressure, but with 2 wt pct water; (3) 174 h at 855 C and 0.77 kbar with 2 wt pct water and 2 molal sodium disilicate (NadiSi); (4) the same time, temperature and pressure as the preceding samples, but with 10 wt pct H2O and 2 molal NadiSi. Samples annealed under the first three sets of conditions showed little or no change in their TL sensitivities, however the samples annealed with 10 wt pct water and 2 molal NadiSi showed a three-fold to 10-fold increase in TL sensitivity, and the temperature of the TL peak was suggestive of feldspar in the high-temperature form. It is suggested that these data are consistent with the TL sensitivity-metamorphism relationship in ordinary chondrites being due to the formation of the TL phosphor, feldspar, by the crystallization of chondrule glass.

Guimon, R. K.↗

NASA NTRS1987

Petrology and geochemistry of alkali gabbronorites from lunar breccia 67975

Detailed results of petrologic and compositional studies of three clasts found in thin sections of the Apollo 16 lunar breccia 67975 and of four clasts extracted from the breccia (for instrumental neutron activation analysis) prior to thin sectioning are reported. The alkali gabbronorites of the breccia form two distinct subgroups, magnesian and ferroan. The magnesian gabbronorites are composed of bytownitic plagioclase, hypersthene, augite, a silica mineral, and trace Ba-rich K-feldspar. The ferroan gabbronorites are composed of ternary plagioclase, pigeonite, augite, Ba-rich K-feldspar, and a silica mineral. Trace minerals in both subgroups are apatite, REE-rich whitlockite, and zircon. The magnesian and ferroan alkali gabbronorites appear to have formed by progressive differentiation of the same, or closely related, parent REE-rich magmas.

James, Odette B.↗

NASA NTRS1988

Iridium, shocked minerals, and trace elements across the Cretaceous/Tertiary boundary at Maud Rise, Wedell Sea, and Walvis Ridge, South Atlantic Ocean

Sediments spanning a 5 meter section across the Cretaceous-Tertiary boundary at ODP holes 689B and 690D, Maud Rise, Wedell Sea and hole 527, Walvis Ridge, are being analyzed for shock deformation, PGE's and other trace elements (including REE's). Mineral separates from each sample were studied with optical microscopy to determine the distribution and microstructural state of quartz and feldspar present in the sediments. Samples from Maud Rise were taken of the K/T transition and at about 50 cm intervals above and below it. These samples consist of carbonate-rich sediments, with the K/T transition marked by a change from white Maastrichtian oozes to a greenish ooze with higher concentrations of altered volcanic clay and vitric ash. The Walvis Ridge site is characterized by more clay-rich sediments with average carbonate content about 60 to 70 percent. Initial results from RNAA studies indicate that iridium is present in all the Maud Rise samples in concentrations equal to or greater than 0.01 ppb (whole-rock basis). Preliminary results from optical microscopy indicate the occurrence of shock mosaicism in quartz and feldspar in all of the samples studied. The pervasiveness of shock mosaicism and presence of planar features to 2 meters from the K/T boundary indicates that a single impact or volcanic explosion 66 ma may be ruled out as responsible for the K/T event. A similar conclusion may be drawn independently from the distribution of iridium and other trace elements. Regardless of the source of the shock waves and sediment contamination, multiple events are required over a ca.0.5 my timespan; currently we favor endogenous sources.

Huffman, Alan R.↗

NASA NTRS1988

Microdeformation in Vredefort rocks; evidence for shock metamorphism

Planar microdeformations in quartz from basement or collar rocks of the Vredefort Dome have been cited for years as the main microtextural evidence for shock metamorphism in this structure. In addition, Schreyer describes feldspar recrystallization in rocks from the center of the Dome as the result of transformation of diaplectic glass, and Lilly reported the sighting of mosaicism in quartz. These textural observations are widely believed to indicate either an impact or an internally produced shock origin for the Vredefort Dome. Two types of (mostly sub) planar microdeformations are displayed in quartz grains from Vredefort rocks: (1) fluid inclusion trails, and (2) straight optical discontinuities that sometimes resemble lamellae. Both types occur as single features or as single or multiple sets in quartz grains. Besides qualitative descriptions of cleavage and recrystallization in feldspar and kinkbands in mica, no further microtextural evidence for shock metamorphism at Vredefort has been reported to date. Some 150 thin sections of Vredefort basement rocks were re-examined for potential shock and other deformation effects in all rock-forming minerals. This included petrographic study of two drill cores from the immediate vicinity of the center of the Dome. Observations recorded throughout the granitic core are given along with conclusions.

Reimold, W. U.↗

NASA NTRS1988

Metamorphism of cordierite gneisses from Eastern Ghat Granulite Terrain, Andhra Pradesh, South India

Cordierite-bearing metapelites of the Eastern Ghat granulite terrain occur in close association of Khondalites, quartzites, calc-silicate rocks and charnockites. Rocks occurring between Bobbili in the north and Guntur in the south of Andhra Pradesh are studied. The association of the mineral and textural relationships suggest the following metamorphic reactions: Garnet + sillimanite + quartz = cordierite, hypersthene + sillimanite + quartz = cordierite, sillimanite + spinel = cordierite + corundum, and biotite + quartz + sillimanite = cordierite + K=feldspar. Generally the minerals are not chemically zoned except garnet-biotite showing zoning when they come in close contact with one another. The potential thermometers are provided by the Fe-Mg distribution of coexisting biotite-garnet and cordierite-garnet. Conflicting interpretation of the P/T dependence of these reactions involving cordierite are due to H2O in the cordierite. The presence of alkali feldspar-quartz assemblage which is common in these gneisses will be constrained from melting only if H2O activity is less than 0.5. The piezometric array inferred is convex towards the temperature array, indicating a rapid and isothermal crustal uplift probably aided by thrust tectonics.

Murthy, D. S. N.↗

NASA NTRS1989

Sources of clasts in terrestrial impact melts - Clues to the origin of LKFM

Low-K Fra Mauro (LKFM) 'basalt', which is found exclusively as an impact melt rock, cannot be modeled geochemically from its clast population or from any combination of known pristine lunar rock types. To clarify clast/melt relationships, a study was made of impact melt rocks from Mistastin Lake crater, Labrador, where there are only three target rocks: anorthosite, quartz monzonite, and granodiorite. Feldspar compositions in these rocks define distinct fields on the An-Ab-Or ternary diagram, making it possible to identify the source of each feldspar clast. Clasts in the Mistastin impact melts do not reflect the abundance of target rocks melted during the impact. The abundance of anorthosite in the clast population varies from 34 to 100 percent compared to a relatively constant value of 65 percent calculated to be in the melt matrix. Therefore the clasts appear to be derived predominantly from material relatively far removed from the zone of impact melting. Melt-matrix composition is dictated strictly by the composition of the target materials within a small radius around and below the point of impact. This suggests that the LKFM composition was derived from a lower crustal source.

Mccormick, K. A.↗

NASA NTRS1992

Melt production in large-scale impact events: Implications and observations at terrestrial craters

The volume of impact melt relative to the volume of the transient cavity increases with the size of the impact event. Here, we use the impact of chondrite into granite at 15, 25, and 50 km s(sup -1) to model impact-melt volumes at terrestrial craters in crystalline targets and explore the implications for terrestrial craters. Figures are presented that illustrate the relationships between melt volume and final crater diameter D(sub R) for observed terrestrial craters in crystalline targets; also included are model curves for the three different impact velocities. One implication of the increase in melt volumes with increasing crater size is that the depth of melting will also increase. This requires that shock effects occurring at the base of the cavity in simple craters and in the uplifted peaks of central structures at complex craters record progressively higher pressures with increasing crater size, up to a maximum of partial melting (approx. 45 GPa). Higher pressures cannot be recorded in the parautochthonous rocks of the cavity floor as they will be represented by impact melt, which will not remain in place. We have estimated maximum recorded pressures from a review of the literature, using such observations as planar features in quartz and feldspar, diaplectic glasses of feldspar and quartz, and partial fusion and vesiculation, as calibrated with estimates of the pressures required for their formation. Erosion complicates the picture by removing the surficial (most highly shocked) rocks in uplifted structures, thereby reducing the maximum shock pressures observed. In addition, the range of pressures that can be recorded is limited. Nevertheless, the data define a trend to higher recorded pressures with crater diameter, which is consistent with the implications of the model. A second implication is that, as the limit of melting intersects the base of the cavity, central topographic peaks will be modified in appearance and ultimately will not occur. That is, the peak will first develop a central depression, due to the flow of low-strength melted materials, when the melt volume begins to intersect the transient-cavity base.

Grieve, Richard A. F.↗