Search NASA⌕ Search

SEARCH · Search NASA

Results for “fire modelling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS2008

Measurement of Fire Radiative Energy from Space and Implications for Fire-Disaster Monitoring and Smoke Emissions Modeling

Measurement of fire radiative energy (FRE) release rate or power (FRP) from satellite provides a vital mechanism for distinguishing different strengths of fires. Analysis of 1-km resolution fire data, acquired globally by the MODerate-resolution Imaging Spectro-radiometer (MODIS) sensor aboard the Terra and Aqua satellites from 2000 to 2006, showed instantaneous FRP values ranging between 0.02 MW and 1866 MW, to which simple thresholds can be applied to categorize fires by strength, in a similar fashion as the strengths of earthquakes and hurricanes. Analysis of regional mean FRP per unit area of land (FRP flux) shows that at peak fire season in certain regions, fires can be responsible for up to 0.2 W/m2 at peak time of day. When considered as the active fire contribution to the direct surface radiative forcing (RF) in the different fire regions, this order of magnitude of FRF fluxes is non negligible. It has been determined experimentally that the amount of FRE released by a fire over the course of its duration is directly proportional to the amount of biomass consumed by it. Furthermore, at the satellite observation scale, the rate of release of FRE (i.e. FRP) is proportional to the rate of biomass consumption, and that of emission of smoke particulates and eventually also other smoke constituents. Therefore, current research efforts are geared toward deriving simple parameterizations that will facilitate direct input of FRP measurements in models, not only to improve the accuracy of burned-biomass and smoke emissions estimations, but also to reduce the hitherto practiced heavy reliance on multiple indirect parameters with indeterminate uncertainties.

Ichoku, Charles↗
NASA NTRS1981

Modeling hydrogen-cyanide absorption in fires

A mathematical model is developed for predicting blood concentrations of cyanide as functions of exposure time to constant levels of cyanide in the atmosphere. A toxic gas (which may form as a result of decomposition of combustion materials used in transportation vehicles) is breathed into the alveolar space and transferred from the alveolar space to the blood by a first-order process, dependent on the concentration of the toxicant in the alveolar space. The model predicts that blood cyanide levels are more sensitive to the breathing cycle than to blood circulation. A model estimate of the relative effects of CO and HCN atmospheres, generated in an experimental chamber with an epoxy polymer, shows that toxic effects of cyanide occur long before those of carbon monoxide.

Cagliostro, D. E.↗
DOE OSTI2026

Effects of slope steepness and cross-slope wind speed on fire spreading behavior for various vegetation

Wildland fire behavior is significantly influenced by environmental factors such as slope steepness, wind speed, and fuel type. Understanding these interactions is critical for improving predictive models and fire management. This study explores how slope steepness and cross-slope wind speed influence fire spread dynamics in various fuel bed types. Simulations are conducted using a physics-based wildland fire model, HIGRAD/FIRETEC, across six slope angles (0–50 %), four cross-slope wind speeds (4–10 m s –1 ), and three fuel bed types (grass, shrubland, and forest). Representative cases are additionally compared with FARSITE fireline evolution. Fire behavior is categorized into distinct propagation types based on spread characteristics and analyzed. The fire propagation angle, which indicates deviation from the wind direction, generally increases with steeper slopes and decreases with stronger cross-slope winds. Secondary upslope propagation is observed in shrubland under moderate slopes, while secondary downwind propagation occurs in all fuel beds at higher wind speeds. These findings highlight fire spread characteristics that differ from predictions by traditional models like Rothermel’s. By capturing complex propagation patterns and dynamics, this study demonstrates the value of a physics-based, atmosphere-fire coupled model for accurate wildland fire prediction. Incorporating secondary propagations and the influence of fuel bed complexities into predictive models can improve the accuracy of fire spread forecasts, enabling more effective fire management and risk mitigation efforts.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRSDate not supplied

Spacecraft Fire Safety Predictions using Verified Saffire Model

A model developed using Fire Dynamics Simulator (FDS) that aimed to determine the effect of a fire in a spacecraft was validated by data collected during the Saffire campaign. The model used inlet and outlet temperatures and CO 2 concentrations of the Saffire payload where fire spread was taking place to determine the amount of heat and combustion products that made it into Northrop Grumman’s Cygnus vehicle. The model was then validated using six remote sensors in various places in the vehicle, as well as a far field device (FFD) in the open zenith section that was representative of average vehicle values. The current work focuses on using the model to predict fire safety scenarios. One simulation aimed to determine the fate of HCl, which sticks to surfaces. The model prediction showed that the HCl was removed from the atmosphere rapidly. This compared well against the FFD data in the Saffire VI campaign event where a bottle of 5% HCl was released into the vehicle. An additional simulation where the Environmental Control and Life Support System (ECLSS) was shut off once the FFD reached 5 ppm of HCl showed that HCl stayed in the atmosphere considerably longer. Continuing the simulation with the ECLSS activated and after temperatures returned to their initial conditions, resulted in a rapid removal of HCL similar to that observed in the original HCl release scenario model. Finally, a simulation that used the heat release rate from a lithium-ion battery test to determine the effect it would have on a spacecraft was performed. This simulation used a heat addition rate that is considerably higher than what was determined from the burning of solid fuels in the Saffire campaign and hence produced a non-trivial temperature increase in more locations within the vehicle.

Fire Safety↗
NASA NTRS2004

Fire Detection Organizing Questions

Verified models of fire precursor transport in low and partial gravity: a. Development of models for large-scale transport in reduced gravity. b. Validated CFD simulations of transport of fire precursors. c. Evaluation of the effect of scale on transport and reduced gravity fires. Advanced fire detection system for gaseous and particulate pre-fire and fire signaturesa: a. Quantification of pre-fire pyrolysis products in microgravity. b. Suite of gas and particulate sensors. c. Reduced gravity evaluation of candidate detector technologies. d. Reduced gravity verification of advanced fire detection system. e. Validated database of fire and pre-fire signatures in low and partial gravity.

Source record↗
DOE OSTI2026

Model Validation Database for Fires Involving Fuels at Liquefied Natural Gas Facilities (Version 2)

This document provides a description of the model evaluation protocol (MEP) database for fires involving liquefied natural gas (LNG) and processing fuels at LNG facilities. The purpose of the MEP is to provide procedures regarding the assessment of a model’s suitability to predict thermal exclusion zones resulting from a fire. The database includes measurements from pool fire, jet fire, and fireball experiments which are provided in a spreadsheet. Users are to enter model results into the spreadsheet which automatically generates statistical performance measures and graphical comparisons with the experimental data. The intent of this document is to provide a description of the experiments and of the procedure required to carry out the validation portion of the MEP. In addition, the statistical performance measures, measurements for comparisons, and parameter variation are provided.

03 NATURAL GAS↗
DOE OSTI2026

Accelerated Carbon and Water Cycles in the Amazon and Congo Basins Revealed From TRENDY Models and Remote Sensing Products

Tropical forests play a vital role in the global carbon cycle and land–atmosphere interactions. Estimating tropical forest carbon–water dynamics is challenging due to observational and modeling uncertainties. This study leverages the “Trends and drivers of the regional scale terrestrial sources and sinks of carbon dioxide” (TRENDY) project models and satellite observations to assess changes (2003–2021) in vegetation carbon, gross primary production (GPP), evapotranspiration (ET), and net biosphere production (NBP) in the Amazon and Congo. Atmospheric CO 2 , climate variability, and land use and land cover changes constrain these variables between 1700 and 2021 with the overall increasing trends of carbon stock and fluxes. The models overestimate vegetation carbon and GPP, while ET and NBP are consistent with observations. Fire-activated models predict lower values for vegetation carbon and GPP, ET, and NBP, aligning more closely with observations. The higher ET from fire-activated models may result from enhanced soil evaporation due to increased canopy openings. Fire-inactivated models could well estimate the magnitudes of NBP. The high vegetation carbon in nitrogen-enabled models points to simulation uncertainties and imbalance in model numbers regarding the nitrogen cycle. Although the nitrogen cycle enhances water use efficiency in both the Amazon and Congo, the models show a higher sensitivity to the nitrogen cycle in the Congo. This study highlights the challenges in accurately representing tropical biogeochemical cycles and the values of satellite products in model evaluations, underscoring the need for standard modeling protocols that address biogeochemical components (e.g., nutrient cycles) to better resolve process-based representations.

Shi, Mingjie [Pacific Northwest National Laborator↗
NASA NTRS2022

Megafires in a Warming World: What Wildfire Risk Factors Led to California’s Largest Recorded Wildfire

Massive wildfires and extreme fire behavior are becoming more frequent across the westernUnited States, creating a need to better understand how megafire behavior will evolve in our warmingworld. Here, the fire spread model Prometheus is used to simulate the initial explosive growth ofthe 2020 August Complex, which occurred in northern California (CA) mixed conifer forests. Hightemperatures, low relative humidity, and daytime southerly winds were all highly correlated withextreme rates of modeled spread. Fine fuels reached very dry levels, which accelerated simulationgrowth and heightened fire heat release (HR). Model sensitivity tests indicate that fire growth andHR are most sensitive to aridity and fuel moisture content. Despite the impressive early observedgrowth of the fire, shifting the simulation ignition to a very dry September 2020 heatwave predicted a>50% increase in growth and HR, as well as increased nighttime fire activity. Detailed model analysesof how extreme fire behavior develops can help fire personnel prepare for problematic ignitions.

Kevin Varga↗
DOE OSTI2025

Fire and Thermal Experiments in Support of the Model Evaluation Protocol for LNG Facility Fires

The motivation for the experiments reported here pertains to the siting of Liquefied Natural Gas (LNG) facilities which requires assessing the potential adverse radiant thermal impacts of accidental fires on the public. The objective is to obtain data on jet fires, pool fires, fireballs, and concrete walls that could serve as thermal barriers for model validation. The fuels tested include ethane, ethylene, propane, and isopentane.

42 ENGINEERING↗
NASA NTRS2013

Mapping the Daily Progression of Large Wildland Fires Using MODIS Active Fire Data

High temporal resolution information on burned area is a prerequisite for incorporating bottom-up estimates of wildland fire emissions in regional air transport models and for improving models of fire behavior. We used the Moderate Resolution Imaging Spectroradiometer (MODIS) active fire product (MO(Y)D14) as input to a kriging interpolation to derive continuous maps of the evolution of nine large wildland fires. For each fire, local input parameters for the kriging model were defined using variogram analysis. The accuracy of the kriging model was assessed using high resolution daily fire perimeter data available from the U.S. Forest Service. We also assessed the temporal reporting accuracy of the MODIS burned area products (MCD45A1 and MCD64A1). Averaged over the nine fires, the kriging method correctly mapped 73% of the pixels within the accuracy of a single day, compared to 33% for MCD45A1 and 53% for MCD64A1.

Aqua↗
NASA NTRS2006

Space Shuttle Main Engine Low Pressure Oxidizer Turbo-Pump Inducer Dynamic Environment Characterization through Water Model and Hot-Fire Testing

The Low Pressure Oxidizer Turbopump (LPOTP) inducer on the Block II configuration Space Shuttle Main Engine (SSME) experienced blade leading edge ripples during hot firing. This undesirable condition led to a minor redesign of the inducer blades. This resulted in the need to evaluate the performance and the dynamic environment of the redesign, relative to the current configuration, as part of the design acceptance process. Sub-scale water model tests of the two inducer configurations were performed, with emphasis on the dynamic environment due to cavitation induced vibrations. Water model tests were performed over a wide range of inlet flow coefficient and pressure conditions, representative of the scaled operating envelope of the Block II SSME, both in flight and in ground hot-fire tests, including all power levels. The water test hardware, facility set-up, type and placement of instrumentation, the scope of the test program, specific test objectives, data evaluation process and water test results that characterize and compare the two SSME LPOTP inducers are discussed. In addition, dynamic characteristics of the two water models were compared to hot fire data from specially instrumented ground tests. In general, good agreement between the water model and hot fire data was found, which confirms the value of water model testing for dynamic characterization of rocket engine turbomachinery.

Patrick Arellano↗
NASA NTRS2014

The Role of Temporal Evolution in Modeling Atmospheric Emissions from Tropical Fires

Fire emissions associated with tropical land use change and maintenance influence atmospheric composition, air quality, and climate. In this study, we explore the effects of representing fire emissions at daily versus monthly resolution in a global composition-climate model. We find that simulations of aerosols are impacted more by the temporal resolution of fire emissions than trace gases such as carbon monoxide or ozone. Daily-resolved datasets concentrate emissions from fire events over shorter time periods and allow them to more realistically interact with model meteorology, reducing how often emissions are concurrently released with precipitation events and in turn increasing peak aerosol concentrations. The magnitude of this effect varies across tropical ecosystem types, ranging from smaller changes in modeling the low intensity, frequent burning typical of savanna ecosystems to larger differences when modeling the short-term, intense fires that characterize deforestation events. The utility of modeling fire emissions at a daily resolution also depends on the application, such as modeling exceedances of particulate matter concentrations over air quality guidelines or simulating regional atmospheric heating patterns.

aerosols↗
NASA NTRSDate not supplied

Assessing Drought and Fire Conditions, Trends, and Susceptibility to Inform State Mitigation Efforts and Bolster Monitoring Protocol in North Central Idaho

Escalating severity and frequency of drought and wildfire call for effective and cost-efficient mitigation planning and monitoring protocols. The Palouse ecoregion, an agricultural epicenter in North-central Idaho, is of particular concern as both drought and wildfire present substantial economic threats. The DEVELOP team implemented Earth observation data to assist the Idaho Office of Emergency Management, Idaho Department of Water Resources, and Idaho Department of Lands in updating the state’s Hazard Mitigation Plan by enhancing their drought and fire monitoring capabilities. The team utilized Landsat 8 Operational Land Imager (OLI), and Aqua and Terra’s Moderate Resolution Imaging Spectroradiometer (MODIS), along with ancillary datasets, to assess drought indicators and map hazard susceptibility. The team upgraded the state’s current fire hazard model by updating existing data layers and adding drought indicator data to support partners’ continued assessment of fire hazard conditions. The team observed Evaporative Demand Drought Index (EDDI) spikes during the highest fire occurrence and burned area years in the study period: 2015 and 2021. Models from dry, high fire occurrence and burned area year 2015 outperformed models from mesic, low fire occurrence and burned area year 2016. The increased understanding of drought conditions and fire susceptibility in this ecosystem will assist partners in improving land management practices.

Ford Freyberg↗