SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
New polymer acceptors (PYSiO- X ( X = 0–30%)) containing siloxane-based flexible spacers (SiO-FSs) are developed. The resulting halogen-free solvent processed all-polymer solar cells show high photovoltaic efficiency and mechanical robustness.
We show via time resolved spectroscopy that triplet formation proceeds via intersystem crossing in a rigid-bridged perylene diimide trimer and via efficient and fast intramolecular singlet exciton fission in the analogous flexible-bridged trimer.
A flexible inflatable hinge includes curable resin for rigidly positioning panels of solar cells about the hinge in which wrap around contacts and flex circuits are disposed for routing power from the solar cells to the power bus further used for grounding the hinge. An indium tin oxide and magnesium fluoride coating is used to prevent static discharge while being transparent to ultraviolet light that cures the embedded resin after deployment for rigidizing the inflatable hinge.
Thin-film CuInS2 solar cell is the leading candidate for space power because of bandgap near the optimum value for AM0 solar radiation outside the earth's atmosphere, excellent radiation hardness, and freedom from intrinsic degradation mechanisms unlike a-Si:H cells. Ultra-lightweight thin-film solar cells deposited on flexible polyimide plastic substrates such as Kapton(trademark), Upilex(trademark), and Apical(trademark) have a potential for achieving specific power of 1000 W/kg, while the state-of-art specific power of the present day solar cells is 66 W/kg. This paper describes the preparation of Cu-rich CuIn(sub 1-x)Ga(sub x)S(sub 2) (CIGS2) thin films and solar cells by a process of sulfurization of CuGa-In precursor similar to that being used for preparation of large-compact-grain CuIn(sub 1-x)Ga(sub x)Se2 thin films and efficient solar cells at FSEC PV Materials Lab.
Abstract Organic solar cells (OSCs) have advanced rapidly due to the development of new photovoltaic materials. However, the long‐term stability of OSCs still poses a severe challenge for their commercial deployment. To address this issue, a dimer acceptor ( d T9TBO) with flexible linker is developed for incorporation into small‐molecule acceptors to form molecular alloy with enhanced intermolecular packing and suppressed molecular diffusion to stabilize active layer morphology. Consequently, the PM6 : Y6 : d T9TBO‐based device displays an improved power conversion efficiency (PCE) of 18.41 % with excellent thermal stability and negligible decay after being aged at 65 °C for 1800 h. Moreover, the PM6 : Y6 : d T9TBO‐based flexible OSC also exhibits excellent mechanical durability, maintaining 95 % of its initial PCE after being bended repetitively for 1500 cycles. This work provides a simple and effective way to fine‐tune the molecular packing with stabilized morphology to overcome the trade‐off between OSC efficiency and stability.
Substrates survive high deposition temperatures. High-temperature-resistant polymers candidate materials for use as substrates of lightweight, flexible, radiation-resistant solar photovoltaic cells. According to proposal, thin films of copper indium diselenide or cadmium telluride deposited on substrates to serve as active semiconductor layers of cells, parts of photovoltaic power arrays having exceptionally high power-to-weight ratios. Flexibility of cells exploited to make arrays rolled up for storage.
To shorten annealing time and minimize substrate heating, flash lamps that deliver short, intense light pulses, commonly called photonic curing, are used to replace thermal annealing using hot plates or ovens. This method is different from equilibrium heating in that the radiant energy is selectively absorbed by the film. The high-intensity light pulses produce a high peak temperature in the film. Because most processes follow Arrhenius behavior, reaching high temperatures allow chemical reactions/phase transformations to occur in a short time, significantly reducing the processing time. Often the results are non-intuitive. We will present fabricating flexible halide perovskite solar cells (PSCs) on indium tin oxide (ITO) coated Willow glass. The effect of ITO transmittance on the photonic curing of nickel nitrate sol-gel precursors into nickel oxide to fabricate hole transport layer and consequently the performance of PSCs. Unexpectedly, ITO samples processed by photonic curing show improved optical and electrical properties.
Not Available
A conceptual design study has been completed which has shown the feasibility of ultra-low-mass planar solar arrays with specific power of 200 watts/kilogram. The beginning of life (BOL) power output of the array designs would be 10 kW at 1 astronomical unit (AU) and a 55C deg operating temperature. Two designs were studied: a retractable rollout design and a non-retractable fold-out. The designs employed a flexible low-mass blanket and low-mass structures. The blanket utilized 2 x 2 cm high-efficiency (13.5% at 28C deg AM0), ultra-thin (50 micron), silicon solar cells protected by thin (75 micron) plastic encapsulants. The structural design utilized the 'V'-stiffened approach which allows a lower mass boom to be used. In conjunction with the conceptual design, modules using the thin cells and plastic encapsulant were designed and fabricated.
High-efficiency thermoelectric materials are vital for sustainable energy. This work presents a reliable method to fabricate freestanding, flexible micrometer-thick films of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS), achieving a power factor of 204 μW m –1 K –2 , 4 orders of magnitude higher than pristine films. Furthermore, this improvement stems from polymer chain realignment and enhanced charge transport via solvent doping, coupled with PSS reduction during post-treatment, which also strengthens film mechanics. Crucially, the freestanding nature ensures transferability, making them ideal for versatile applications. Besides thermoelectrics, these highly conductive, robust, and flexible PEDOT:PSS films provide attractive solutions for organic solar cells, battery electrodes, and flexible electronics.
Highly efficient organic-inorganic hybrid perovskite solar cells (OIHP-SCs) are often fabricated on a transparent conducting oxide (TCO) substrate such as indium tin oxide (ITO). However, the presence of TCOs is disadvantageous to the development of flexible OIHP-SCs due to the brittle nature of ITO which is easily breakable during bending. Herein, a flexible TCO-free OIHP-SC is demonstrated by using lithium bis(trifluoromethane)sulfonimide (Li-TFSI) as a codopant for the single-layer graphene transparent conducting electrode and poly(triarylamine) hole-transporting material (HTM) on a flexible polydimethylsiloxane substrate. The optical and electrical properties of the Li-TFSI-doped graphene substrate are measured by controlling the doping amount and the best conditions for charge extraction are established at a doping concentration of 20 mm Li-TFSI, thus optimizing the device photovoltaic performance. As a result, a highest power conversion efficiency of 19.01% is demonstrated by the flexible TCO-free OIHP-SC devices with an active area of 1 cm 2 . In addition, the flexible TCO-free OIHP-SCs exhibit good bending stability after 5000 bending cycles at radii of 6, 4, and 2 mm and excellent light soaking stability under 1 Sun light intensity over 1000 h as opposed to the poor stability when using poly(3,4-ethylenedioxythiophene) polystyrene sulfonate as the HTM.
The feasibility of a copper-base metallization for shallow-junction cells applied in flexible solar arrays in space is discussed. This type of metallization will reduce usage of precious metals (such as silver), increase case of bonding (by welding or by soldering) and eliminate heavy high Z interconnects (such as molybdenum). The main points of concern are stability against thermally induced diffusion of copper into silicon which causes degradation of shallow cell junctions, and low series resistance of the contact with semiconductor which promotes cell efficiency.
The Power Extension Package (PEP) is the prime focus of a development program to produce low cost solar cells. The PEP is a 32 kilowatt flexible substrate, retrievable, solar array system for use on the Space Shuttle. Solar cell cost will be reduced by increasing cell area and simplifying cell and coverglass fabrication processes and specifications. The cost goal is to produce cells below $30 per watt. Two and ten ohm-cm silicon cells were investigated. This paper describes a unique radiation damage test and side-by-side comparison of candidate cell types with pre-and post-irradiation airplane calibration of outer space short-circuit current.
Polycrystalline thin film solar cells fabricated on light-weight, flexible substrates are very attractive for space applications. In this work CulnSe2 (CIS) based thin film devices were processed on metallic foil substrates using the selenization technique. CIS deposition method involved reaction of electron-bean evaporated Cu-In precursor layers with a selenizing atmosphere at around 400 C. Several metallic foils such as Mo, Ti, Al, Ni, and Cu were evaluated as possible substrates for these devices. Solar cells with AM1.5 efficiencies of 9.0-9.34 percent and good mechanical integrity were demonstrated on Mo and Ti foils. Monolithic integration of these devices was also demonstrated up to 4 in x 4 in size.
Radiation-resistant but cost-efficient, flexible, and ultralight solar sheets with high specific power (W g -1 ) are the "holy grail" of the new space revolution, powering private space exploration, low-cost missions, and future habitats on Moon and Mars. Herein, this study investigates an all-perovskite tandem photovoltaic (PV) technology that uses an ultrathin active layer (1.56 micrometers) but offers high power conversion efficiency, and discusses its potential for high-specific-power applications. This study demonstrates that all-perovskite tandems possess a high tolerance to the harsh radiation environment in space. The tests under 68 MeV proton irradiation show negligible degradation (<6%) at a dose of 10 13 p + cm -2 where even commercially available radiation-hardened space PV degrade >22%. Using high spatial resolution photoluminescence (PL) microscopy, it is revealed that defect clusters in GaAs are responsible for the degradation of current space-PV. By contrast, negligible reduction in PL of the individual perovskite subcells even after the highest dose studied is observed. Studying the intensity-dependent PL of bare low-gap and high-gap perovskite absorbers, it is shown that the V OC , fill factor, and efficiency potentials remain identically high after irradiation. Radiation damage of all-perovskite tandems thus has a fundamentally different origin to traditional space PV.
Cylindrical drum, wrapped with flexible solar array of solar cells mounted on Mylar sheet, is held by two end-fittings with cable (under tension) passing through axel of drum. Drum is held to end-fittings by axial cable through drum axel; drum is released for deployment when cable is cut at each end and end-fittings spring outward.
Cellulose, often considered a highly promising substitute for petroleum-based plastics, offers several compelling advantages, including abundant availability, cost-effectiveness, environmental friendliness, and biodegradability. However, its inherent highly crystalline structure and extensive hydrogen-bonded network pose challenges for processing and recycling. Here, in this study, we introduce the concept of cellulose vitrimers (CVs), wherein dynamic bonds are incorporated to reconfigure the hydrogen-bonded network, resulting in a mechanically robust, highly transparent material. CVs exhibit exceptional malleability, thermal stability, and noteworthy resistance to water and solvents. Due to the dynamic bond disassociation, CVs can be effectively chemically recycled using a well-established “dissolution-and-reforming” process. Moreover, CVs have proven successful as flexible substrate materials for organic solar cells, outperforming traditional petroleum-based polyethylene naphthalate (PEN). Given these advantages, CVs have the potential to replace conventional petroleum-based materials as recyclable and environmentally friendly alternatives, particularly within the realm of electronic devices and displays.
The key to achieving high specific power (watts per kilogram) space photovoltaic arrays is the development of high-efficiency thin-film solar cells that are fabricated on lightweight, space-qualified substrates such as Kapton (DuPont) or another polymer film. Cell efficiencies of 20 percent air mass zero (AM0) are required. One of the major obstacles to developing lightweight, flexible, thin-film solar cells is the unavailability of lightweight substrate or superstrate materials that are compatible with current deposition techniques. There are two solutions for working around this problem: (1) develop new substrate or superstrate materials that are compatible with current deposition techniques, or (2) develop new deposition techniques that are compatible with existing materials. The NASA Glenn Research Center has been focusing on the latter approach and has been developing a deposition technique for depositing thin-film absorbers at temperatures below 400 C.