Search NASA⌕ Search

SEARCH · Search NASA

Results for “fractional crystallization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Enhanced Hanford Low-Activity Waste Glass Property Data Development: Phase 4

This report summarizes and analyzes the data collected on a fourth test matrix of 25 low-activity waste glass compositions intended to expand the composition-property database and to validate the Vienna et al. (2020) property-composition models. The 25 low-activity waste glass compositions were statistically designed to be within the composition region of the 2020 models. The analyses performed on these glasses include chemical composition (for target compositional verification), density, viscosity, electrical conductivity, crystal fraction, canister centerline cooling with crystal identification, product consistency test response, vapor hydration test response, and sulfur solubility. This report discusses the results obtained from these tests.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Enhanced Hanford Low-Activity Waste Glass Property Data Development: Phase 2

This report summarizes and analyzes the data collected on a second test matrix of 42 low-activity waste (LAW) glass compositions intended to expand the LAW glass composition region over which glass property-composition models are valid. The 42 LAW glass compositions were selected using a statistical layered experimental design approach to explore a new glass composition region that overlaps and expands beyond the previously explored LAW glass composition region. The layered design of 42 LAW glasses consisted of 21 outer-layer glasses, 15 inner-layer glasses, a center glass (three replicates), and two glasses previously tested at another laboratory. The outer-layer glass compositions include extrema based on current projections of the LAW feeds and melter operating temperatures. One of the outer-layer compositions was eliminated due to the inability to form a glass. Therefore, only 41 glasses were analyzed. The analyses performed on these glasses include chemical composition (for target compositional verification), density, viscosity, electrical conductivity, crystal fraction, canister centerline cooling with crystal identification, the Product Consistency Test, sulfur solubility, and the Vapor Hydration Test. This report discusses the results obtained from this testing.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Experimental study of pyroxene-liquid interaction in quartz-normative basalt 15597

Equilibrium and controlled cooling rate experiments on a synthetic analog of Apollo 15 quartz normative basalt 15597 are reported. While the partitioning of the major elements Ca, Mg, and Fe between pyroxene and liquid is rate independent, the K sub D parameter for Fe/Mg, which is calculated for low-Ca pyroxene, is temperature dependent. It is suggested that chemical trends observed in lunar pyroxenes are a consequence of three rate processes. The processes are (1) rate-dependent suppression of crystallization of other phases until lower temperature alters liquid composition and, therefore, the composition of the pyroxene that crystallizes; (2) the efficiency of fractional crystallization and the extent of crystal zoning are rate dependent; and (3) the partitioning of Al2O3, TiO2, and Cr2O3 between pyroxene and liquid depends on cooling rate.

Grove, T. L.↗

Crystallization histories of the group IIF iron meteorites and Eagle Station pallasites

The group IIF iron meteorites and Eagle Station pallasites (PES) have highly siderophile element abundances (HSE; Re, Os, Ir, Ru, Pt, and Pd) of metal that are consistent with formation in planetesimal cores by fractional crystallization with minor to major solid metal-liquid metal mixing. Modeling of HSE abundances of the IIF irons indicates a complex formation history that included the mixing of primitive and evolved solid and liquid metals. By contrast, modeling of HSE abundances of PES metal suggests these meteorites formed mainly as equilibrium solids from a common liquid. Abundances of some of the siderophile elements in the IIF irons and PES are permissive of a common core origin, however, the abundances of W and Ni indicate the PES ultimately formed on a more oxidized body. The PES most likely formed by the injection of olivine present at the core-mantle boundary into a metallic core liquid as a result of impact. The core then crystallized inward, trapping the olivine.

58 GEOSCIENCES↗

Systematic chemical variations in large 3AB iron meteorites: Clues to core crystallization

Analysis of numerous individual iron meteorites have shown that fractional crystallization of iron cores result in variations in chemical concentration of the solid core which span several orders of magnitude. The magnitude and direction of the resulting spatial gradients in the core can provide clues to the physical nature of the core crystallization process. We have analyzed suites of samples from three large 3AB irons (Cape York, 58t; Chupaderos, 24t; Morito, 10t) in order to estimate local chemical gradients. Initial results for the concentrations of Ge, Pd, Pt (Massey group), Ir, Au, As, Co, Os, and Rh (Dalhouse group), and P (Arizona group) show significant ranges among the Cape York and Chupaderos samples and marginally significant ranges among the Morito samples. Measurements of Au, Ir, Co, Ni, Cu, Ga, As, W, Re (from UCLA) and Ni and Co (Arizona group) are in progress. We find a spatial Ir gradient in Chupaderos with a magnitude similar to the one reported for Agpalilik (Cape York iron) by Esbensen et al.

Haack, H.↗

Martian Magma Evolution from Olivine-Hosted Melt Inclusions in Shergottites Using MELTS Models

Shergottites, the largest martian meteorite group, come from at least two geochemically different source reservoirs i.e. incompatible trace element (ITE)-depleted and enriched. The depleted shergottites are thought to be derived from an ITE-depleted mantle reservoir, while enriched shergottites are thought to be derived from an ITE-enriched mantle reservoir that represents late stage residual melt from a magma ocean or interaction with martian crust. Moreover, the martian crust is distinct from shergottites, by being highly oxidized, distinctly ITE-enriched, and older. The link between the crust and shergottite compositions is poorly understood. Here we model shergottite differentiation to resolve the origin of enriched shergottites and why the bulk martian crust is compositionally distinct from shergottites. Early formed olivine-hosted melt inclusions can provide primary melt composition from which the parental magma had crystallized and also information at different stages of crystallization during parent magma differentiation that leads to shergottite magma evolution as well as crustal contribution assessment. We analyzed olivine-hosted melt inclusions of two enriched poikilitic shergottites for their major, minor and trace element concentrations using electron microprobe and laser ablation ICP-MS. We corrected the melt inclusion compositions for post-entrapment re-equilibration with their host olivine. To comprehend the crystallization sequence of these rocks and whether the melt entrapment is consistent with the crystallization, we use MELTS models for equilibrium and fractional crystallization. The results of these models suggest that all the melts were trapped in a closed system progressive crystallization at 1150-1210 ⁰C within 1 kbar to 1 bar pressure that is equivalent to <8.5 km, implying melt entrapment without any additional exogenous materials.

Ferdous, J.↗

A note on the Apollo 15 green glass vitrophyres

The paper discusses the vitrophyric fraction of Apollo 15 green glasses which contain skeletal crystals of olivine. Although the crystals are uniform in composition, the coexisting glass shows a range in composition and an olivine subtraction trend. The data suggest that the vitrophyres are part of the traditional Apollo 15 green glass suite composition; the natural trend of rapid low pressure crystal-fractionation suggests that other VLT rock types cannot be derived from Apollo 15 green glass magma.

Basu, A.↗

Equilibrium Fe isotope fractionation between olivine, pyroxene, spinel and MORB glass: Implications for mantle partial melting to generate MORBs

Primitive mid-ocean ridge basalts (MORBs) exhibit Fe isotopic compositions heavier than the upper mantle by +0.074 ± 0.028 ‰ for δ 56 Fe. The processes responsible for this isotopic difference remain unclear. Modeling of Fe isotope fractionation during mantle partial melting requires reliable equilibrium Fe isotope fractionation factors between minerals and melts, for which consistent data are still lacking. Here, in this study, we used Nuclear Resonant Inelastic X-ray Scattering (NRIXS) technique to measure Fe force constants for a MORB glass (ALV 519-4-1) and natural mantle minerals (olivine, orthopyroxene, clinopyroxene, and spinel) to determine the equilibrium Fe isotope fractionation factors between them. The force constants determined in this study, in increasing order, are 167 ± 26 N/m for spinel, 175 ± 17 N/m for olivine, 176 ± 20 N/m for MORB glass, 205 ± 26 N/m for clinopyroxene, and 219 ± 36 N/m for orthopyroxene. We evaluated the previously proposed mechanisms for the heavy Fe isotopic composition of MORBs, including (i) mantle partial melting, (ii) mantle lithological heterogeneity, with pyroxenite in the source, (iii) mantle metasomatism by low-degree melts, and (iv) fractional crystallization of olivine from melts. For (i), we used the pMELTS program to simulate adiabatic decompression melting of mantle peridotites, and calculated Fe isotope fractionation based on Fe 3+ –Fe 2+ equilibrium-controlled fractionation, where Fe 3+ forms stronger bonds and is more incompatible than Fe 2+ . At 10 wt% peridotite melting, corresponding to MORB generation, only +0.03 ‰ Fe isotope fractionation between the melt and the original bulk composition (Δ 56 Fe = δ 56 Fe melt - δ 56 Fe 0 ) was produced, insufficient to account for the observed MORB-upper mantle difference. For (ii), melting of pyroxenites yields smaller Fe isotope fractionation than melting of peridotites, making it unlikely the cause for the MORB-upper mantle isotopic difference. For (iii), both the Fe 3+ /ΣFe ratio and the δ 56 Fe of melts increase with the degree of partial melting, indicating that low-degree melts are not isotopically heavy enough to significantly alter the isotopic composition of lithospheric mantle through metasomatism. For (iv), equilibrium isotope fractionation between olivine and melt is near zero. These results suggest that equilibrium Fe isotope fractionation alone cannot explain the MORB isotopic signature, highlighting the potential role of kinetic isotope fractionation. Using a diffusion model, we calculated kinetic Fe and Mg isotope fractionations associated with (iv) olivine crystallization from a melt, and found that the predicted Fe and Mg isotope fractionations were inconsistent with observations in MORBs. Qualitatively, two processes could have induced kinetic Fe isotope fractionation during MORB generation: (a) Fe-Mg interdiffusion between melt and solid during melt migration and (b) reactive melt-rock interactions during melt focusing. However, a quantitative understanding of their role in modifying the melt isotopic composition remains limited and requires further investigation.

Fe isotopes↗

Crystalline versus Glassy Nature of Iron Phosphate Waste Forms Subjected to Different Slow Cooling Curves

This report provides experimental details and associated results on the elemental distributions (compositions), crystalline/amorphous phase distributions, and microstructures for iron phosphate reference materials (DPF5-336) made with different cooling curves and starting from different temperatures (i.e., 1050°C and 1200°C). The primary goal of this work was to evaluate the properties of the DPF5- 336 reference material after it was melted and cooled at different rates to simulate the cooling profile of different types of canisters. Crystal fractions across the SCC#2, SCC#3, and SCC#5 samples were all similar ranging in crystal content of 35.66–41.14 mass% with amorphous fractions being the balance (64.34–58.86 mass%, respectively). This shows that the heat treatment profile did not seems to greatly affect either the total crystal content or the phase distributions. The quenched sample was almost completely amorphous (99.55 mass%) with very small peaks identified as Li 3 Fe 2 (PO 4 ) 3 whereas the SCC-treated materials showed peaks for what appear to be ten separate phases present in various concentrations. Another goal of these experiments was to see how the phase distribution affected chemical durability of these waste forms, but that information is being collected at Argonne National Laboratory and will be published in a separate report

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Quartz-hosted inclusions and embayments reveal storage, fluxing, and ascent of the Mesa Falls Tuff, Yellowstone

Quartz-hosted glasses from the Mesa Falls Tuff provide a geochemical window into the pre-eruptive magmatic system from one of Yellowstone's largest-volume caldera-forming eruptions. H 2 O and CO 2 concentrations, along with major and trace elements, were measured in both fully enclosed glass inclusions and partially enclosed embayments in the same quartz crystals. Major elements are largely consistent between the inclusions and embayments, except for K 2 O and Na 2 O. Of note, K 2 O is enriched by ~1 wt.% in embayment interiors relative to inclusions. Most trace elements are also enriched in the embayment interiors compared to inclusions from the same crystals. Fractionation trends of trace elements are consistent with ~30-60% crystallization. Quartz-hosted glass inclusions preserve 3.1±0.9 wt.% H 2 O and 493±227 ppm CO 2 whereas embayment interiors have 0.9±0.1 wt.% H 2 O and 399±229 ppm CO 2 . The CO 2 is roughly similar, but the distinct ~2 wt.% discrepancy between inclusion and embayment interior H 2 O contents may have been produced by CO 2 fluxing sourced from underplated Yellowstone basalts. H 2 O gradients within embayments are flat in their interiors and modified by sharp positive gradients near embayment exteriors which were produced by post-eruptive rehydration. CO 2 gradients occur as gently sloping concentration gradients that extend inward 150 to 250 μm from the embayment exterior. Finally, finite-difference 1D and 2D diffusion modeling indicates the distribution of H 2 O and CO 2 in embayments was produced by slow, fluid-saturated decompression that preceded rapid ascent during the caldera-forming eruption.

2D diffusion modeling↗

Trapped Melt in IIIAB Irons: Solid/Liquid Elemental Partitioning During the Fractionation of the IIIAB Magma

Group IIIAB, the largest iron-meteorite group, shows compositional trends (including a three-order-of-magnitude It concentration range) indicating that it formed by fractional crystallization of a metallic magma. Because about 200 irons are available, and all degrees of crystallization are well represented, IIIAB offers an excellent set of samples for the study of crystallization at all depths of the asteroidal core. On log-log Ir-Au, and Ir-As diagrams IIIAB forms a broad band; the breadth represents real meteorite-to-meteorite variations, far outside experimental or sampling uncertainties. A successful model must explain the width of this band; I suggest that it mainly resulted from the trapping of parental magma within the crystallizing solid. Because S is essentially insoluble in metal, the abundance of FeS is a measure of the fraction of trapped liquid. The trapped-melt model is supported by the observation that irons having higher S contents plot closer to the inferred composition of the magmatic parental liquid. The lowest S values are found in the irons occupying the left envelope of the IIIAB Ir-Au or Ir-As compositional fields, thus it is this set of irons that should be interpreted as the solid products of a fractionating magma. This simplifies the modeling of the crystallization process and allows inferences regarding the distribution ratios for other elements in the evolved IIIAB system. The large (multiton) Cape York irons show wide variations in their trapped-melt fractions; their compositions seem best understood in terms of a low initial S content of the IIIAB magma, about 20 mg/g. The inferred initial IIIAB distribution coefficient for Ir, 4.6, is much higher than published values based on laboratory studies of low-S systems; I suggest that low-S (and low-P) partition-ratio measurements tend to err in the direction of unity. In IIIAB distribution coefficients for Au, As, and Ni were still < 1 when the most evolved IIIAB irons formed, another indication of a low initial S content.

Wasson, John T.↗

Viscosity of the Mercurian Magma Ocean: Implications of Sulfur-Free and Sulfur-Bearing Magma Oceans for Differentiation and Crustal Petrogenesis

Mercury is believed to have had a magma ocean in its early evolution whose solidification dynamics contributed to the planet’s present day surface composition. The surface is characterized by two main geological provinces; the Northern Smooth Plains (NSP),and the Heavily Cratered Terrain (HCT) and Intercratered Terrian (IcT). These provinces are defined by the differences in morphology, composition, and age. The NSP are located in the northern hemisphere and have low Mg/Si, Ca/Si, and S/Si ratios and high Al/Si ratios, and are compositionally analogous to a magnesian alkali basalt. The HCT/IcT cover the majority of the planet and are older than the NSP, and are characterized by high Mg/Si, Ca/Si, and S/Si ratios and low Al/Si ratios. The dichotomy in surface composition motivates the study into the structure of the mantle as a product of magma ocean solidification. Two important and interrelated parameters that determine the efficiency of crystal fractionation during magma ocean solidification are convection vigor and viscosity of the magma ocean. Crystal suspension in a cooling magma ocean could be efficient or inefficient which suggests two end member possibilities for magma ocean solidification. The first is the formation of a compositionally stratified mantle reflecting a cumulate sequence produced along a fractional liquid line of descent. The second is the formation of a well-mixed, batch crystallized mantle by high viscosity and/or vigorously convecting magma ocean. Determining which of these end members, or where on the spectrum between them is most relevant to Mercury’s magma ocean can be experimentally constrained through high P-T falling-sphere viscometry experiments.

Mouser, M. D.↗

Iron isotope fractionation between solid and liquid metal in the Fe-P±Ni system: Experimental constraints and implications for meteorites

Iron meteorites record a range of Fe isotope compositions that hold valuable information regarding the evolution of their parent bodies. Interpreting this isotopic variability, however, requires experimental constraints on the equilibrium isotope fractionation between phases. It is thought that the cores of many iron meteorite parent bodies experienced fractional crystallization, during which crystallization of solid iron-nickel occurs from an increasingly non-metal-rich liquid alloy. Phosphorus is one component of this alloy, and this study provides the first constraints on Fe-isotope fractionation between solid and liquid alloys in the Fe-Ni-P system. Experiments comprising Fe and P show a clear enrichment in the light isotopes of Fe in the liquid phase, which increases with the amount of phosphorus. Nickel-bearing samples are offset from the trend defined by Ni-free experiments, which is accounted for by the change in the solid alloy phase from a body-centered cubic to face-centered cubic structure upon the addition of Ni. The increasing light isotope enrichment of the liquid with increasing P content suggests interstitial solution of P, which is known to lengthen Fe-Fe bonds in Fe-P liquids (Waseda and Shiraishi 1977). Results suggest a negligible effect of P on Fe isotope fractionation during planetesimal core crystallization. Iron isotopes may, however, prove useful for identifying the petrogenesis of schreibersite in pallasites and iron meteorites.

58 GEOSCIENCES↗

Modeling the evolution of Sm and Eu abundances during lunar igneous differentiation

The current work presents models for the evolution of europium and samarium abundances during lunar igneous processes. The effect of probable variations in lunar temperature and oxygen fugacity, mineral-liquid distribution coefficients, and the crystallization or melting progression are considered in the model calculations. Changes in the proportions of crystallizing phases strongly influence the evolution of trace element abundances during fractional crystallization, and models must include realistic estimates of the major phase equilibria during crystallization. The results are applied to evaluating the possibility of generating KREEP-rich materials by lunar igneous processes.

Weill, D. F.↗

Nickel-rich, volatile depleted iron meteorites: Relationships and formation processes

Ungrouped iron meteorites Tishomingo, Willow Grove, and Chinga, and group IVB iron meteorites, are Ni-rich. Similarities include enrichments of 10–100 × CI for some refractory siderophile elements, and equivalent depletions in more volatile siderophile elements. Superimposed on the overall enrichment/depletion trend, certain siderophile elements (P, W, Fe, Mo) are depleted relative to elements of similar volatility. All three ungrouped irons derive from parent bodies formed in the early Solar System. Willow Grove and Chinga are characterized by cosmic ray exposure corrected 182 W/ 184 W consistent with metal-silicate segregation on their parent bodies within 1–3 Myr of Solar System formation, within the age range determined for segregation of magmatic iron meteorite parent bodies, including group IVB irons. Tishomingo is characterized by a younger model age 4–5 Myr subsequent to Solar System formation, reflecting either late stage melting resulting from 26 Al decay, or an impact resetting. The discovery of stishovite in Tishomingo, indicating exposure to a minimum shock pressure of 8–9 GPa, is consistent with the latter. Stishovite in Tishomingo and chromite included in troilite-daubréelite in IVB irons allows oxygen isotopic composition comparison between these meteorites. Different mass independent oxygen isotopic compositions of IVB irons and Tishomingo indicate genetically distinct parent bodies. By contrast, mass independent Mo isotopic compositions overlap within analytical uncertainties, indicating a similar, carbonaceous chondrite (CC) type genetic heritage. Molybdenum and 183 W isotopic data for Chinga and Willow Grove indicate derivation from CC type parent bodies. Willow Grove shares Mo and 183 W isotopic compositions with the Ni-rich South Byron Trio (SBT) grouplet and the Milton pallasite. These Ni-rich meteorites likely formed in the same general nebular environment as other CC planetesimals, likely the outer Solar System. Highly siderophile element (HSE) abundances of Willow Grove and Tishomingo are similar to some IVB meteorites, consistent with formation by moderate degrees of fractional crystallization from initial metallic melts with low S and P, and modestly fractionated HSE. The comparable HSE abundances of Tishomingo and Willow Grove to some IVB irons, yet substantially higher Ni concentrations, indicate formation on parent bodies with lower bulk HSE abundances or HSE concentration in proportionally smaller volumes of metal. HSE abundances in Chinga are considerably lower than in IVB irons, highly fractionated, and processes responsible for these remain elusive. For IVB irons and these ungrouped irons, high temperature condensation likely dominated the enrichment and depletion of the refractory and volatile siderophile elements, respectively. Parent body degassing may have also played a role. Relative depletion of volatile siderophile elements is not, however, a universal feature of high-Ni meteorites. The SBT and Milton pallasite are Ni-rich, but less depleted in the more volatile siderophile elements. Nickel enrichment was likely driven by oxidation of Fe metal during parent body accretion or core segregation. Oxidation of the Tishomingo and Willow Grove parent bodies may have occurred at ~ IW + 1, indicated by relative Mo and W depletions due to metal/water reaction during differentiation. Late-stage reduction, indicated by the presence of Cr-bearing sulfides in Tishomingo and IVB irons, may have resulted from exhaustion of the oxidant.

36 MATERIALS SCIENCE↗

The provenance of metal in anorthositic rocks

Calculated compositions for metal crystallized from anorthositic melt rocks or feldspathic basalts such as 14310, 68415, and 77017 are (1) meteoritic in the initial stages or if metal is the only phase crystallized, and (2) higher in Co than meteoritic metal as a result of fractional crystallization of metals and silicates. Metal in coarse anorthositic rocks 15415, 15455, 60015, 64435, and 78238 is not of meteoritic composition and has Co contents from 0 to 9% with a Ni/Co ratio of about 1. The formation of anorthosites and the composition of the earliest metal are discussed with attention to Ni concentrations and the Ni/Co ratio. It is shown that anorthositic hornfels and breccias contain metal of a composition not found in their source material, coarse anorthosite; it is suggested that the hornfels includes metal grains probably derived with little change in composition from ancient meteorites.

Hewins, R. H.↗

Moonage Daydream: Reassessing the Simple Model for Lunar Magma Ocean Crystallization

Details of the differentiation of a global-scale lunar magma ocean (LMO) remain enigmatic, as the Moon is not simply composed of highlands anorthosite and a suite of mare basalts as inferred from early studies. Results from recent orbital missions, and the increasingly detailed study of lunar samples, have revealed a much larger range of lithologies, from relatively MgO-rich and "purest anorthosite" discovered on the lunar far side by the M3 instrument on Chandraayan-1 to more exotic lithologies such as Si-rich domes and spinel-rich clasts distributed globally. To understand this increasingly complex geology, we must understand the initial formation and evolution of the LMO, and the composition of the cumulates this differentiation could have produced. Several attempts at modelling such a crystallization sequence have been made, and have raised as many questions as they have answered. We present results from our ongoing experimental simulations of magma ocean crystallization, investigating two end-member bulk compositions (TWM and LPUM) under fully fractional crystallization conditions. These simulations represent melting of the entire silicate portion of the Moon, as an end-member starting point from which to begin assessing the evolution of the lunar interior and formation of the lunar crust.

Rapp, J. F.↗

Composition of metal in aubrites - Constraints on core formation

Aubrites are differentiated stone meteorites with small amounts of metal. Study of eight aubrites reveals that Fe,Ni grains occur in a variety of textures, from irregular micron-sized particles to rounded nodules of up to 1.5 cm in diameter. The pattern of siderophile element abundances in the silicates is characteristic of igneous metal segregation (the more siderophilic elements are more depleted). Despite large uncertainties in metal/silicate distribution coefficients, the calculated minimum metal content of the aubrite precursor is not unlike that of enstatite chondrites and suggests that metal segregation was an extensive process in the early magmatic evolution of the aubrite parent body. However, the lack of appreciable fractionation in the trace element signature of the metal suggests that the metal now observed in aubrites did not undergo fractional crystallization in a core. We argue instead that the analyzed metal nodules represent a fraction of the iron-nickel that, during partial melting, was not completely segregated from the silicates.

Casanova, Ignacio↗