Search NASA⌕ Search

SEARCH · Search NASA

Results for “functional groups”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

Spacecraft attitude and articulation control systems for future planetary missions

Comparative evaluations of the major types of control systems, such as three-axis-active, spin-stabilized, dual spin, and momentum basis, are performed to determine their applicability for planetary missions in the early 1990s. The key requirements that determine control system selection are science functional, mission orbital, and vehicle configuration characteristics. Five functional groups are given for preliminary control system selection: (1) preliminary survey; (2) detailed remote observation; (3) close scrutiny - deep space; (4) close scrutiny - near sun; (5) sample return. Requirements affecting the selection of attitude/articulation control methods, comparison of the performance capabilities of competing control concepts, criteria for selecting competing methods, comparison of relative complexity, and identification of hardware needs and trends that may affect control system selection are considered.

Mcglinchey, L. F.↗
NASA NTRS1979

Remote Sensing and Problems of the Hydrosphere

A discussion of freshwater and marine systems is presented including areas of the classification of lakes, identification and quantification of major functional groups of phytoplankton, sources and sinks of biochemical factors, and temporal and regional variability of surface features. Atmospheric processes linked to hydrospheric process through the transfer of matter via aerosols and gases are discussed. Particle fluxes to the aquatic environment and global geochemical problems are examined.

Goldberg, E. D.↗
NASA NTRS1982

Neutralizing Amine-Cured Epoxy Surfaces

New surface treatment is a rapid, convenient, and effective method for converting unused amines and amine functional groups into neutral, noncorrosive substituted urea. Reaction proceeds at room temperature, takes only a few minutes, and leaves no corrosive residue. Surface should first be washed with alcohol to remove as much as possible of unreacted amine. Then it should be dried, since residual moisture or alcohol may consume some of treatment reagent and neutralization may then be incomplete.

Lee, S. Y.↗
NASA NTRS1981

Reduction of thionucleosides - A prebiotic pathway to deoxyribonucleosides

A mechanism is proposed for the prebiotic synthesis of deoxyribonucleotides and possible nucleic acid analogs from ribonucleotides by a pathway involving 2'-thio-2'-deoxyribonucleosides. The mechanism is supported by laboratory experiments in which 2'-thio-2'-deoxycytidine was synthesized from anhydro arabinosyl cytosine in dithiophosphate and CS2. The subsequent reduction of the thio-analogs has been achieved with ferrous ion, and photochemically. It is noted that the proposed pathway for prebiotic deoxyribonucleotide synthesis is in harmony with the Principle of Continuity, as both the proposed and present pathways rely on the reduction of a 2' functional group.

Patel, A. D.↗
NASA NTRS1982

A study comparing several isocyanate and isothiocyanate derivatives of Porasil C for the separation of lower hydrocarbons by GC

Several isocyanate and isothiocyanate derivatives of Porasil C were synthesized and evaluated for the separation of the low-molecular-weight saturated and unsaturated hydrocarbons. It was shown that different functional groups significantly affect the retention behavior of the more polar unsaturated hydrocarbons, and that reproducible results can be obtained if dry carrier gas is used.

Pollock, G. E.↗
NASA NTRS1983

Epoxy hydantoins as matrix resins

Tensile strength and fracture toughness of castings of the hydantoin resins cured with methylenedianiline are significantly higher than MY 720 control castings. Water absorption of an ethyl, amyl hydantoin formulation is 2.1 percent at equilibrium and Tg's are about 160 C, approximately 15 deg below the final cure temperature. Two series of urethane and ester-extended hydantoin epoxy resins were synthesized to determine the effect of crosslink density and functional groups on properties. Castings cured with methylenedianiline or with hexahydrophthalic anhydride were made from these compounds and evaluated. The glass transition temperatures, tensile strengths and moduli, and fracture toughness values were all much lower than that of the simple hydantoin epoxy resins. Using a methylene bishydantoin epoxy with a more rigid structure gave brittle, low-energy fractures, while a more flexible, ethoxy-extended hydantoin epoxy resin gave a very low Tg.

Weiss, J.↗
NASA NTRS1982

Method of neutralizing the corrosive surface of amine-cured epoxy resins

The corrosive alkaline surface layer of an epoxy resin product formed by the curing of the epoxy with an aliphatic amine is eliminated by first applying a non-solvent to remove most or all of the free unreacted amine and then applying a layer of a chemical reagent to neutralize the unused amine or amine functional groups by forming a substituted urea. The surface then may be rinsed with acetone and then with alcohol. The non-solvent may be an alcohol. The neutralizing chemical reagent is a mono-isocyanate or a mono-isothiocyanate. Preferred is an aromatic mono-isocyanate such as phenyl isocyanate, nitrophenyl isocyanate and naplthyl isocyanate.

Lee, S. Y.↗
NASA NTRS1982

Flexible composite film for printed circuit board

A flexible printed circuit for a printed circuit board in which layers of reaction product composed of a combination of phenoxy resin - polyisocyanate - brominated epoxy resin, and in which the equivalent ratio of those functional groups is hydroxyl group: isocyanate group: epoxy group - 1 : 0.2 to 2 : 0.5 to 3 are laminated on at least one side of saturated polyester film is discussed.

Yabe, K.↗
NASA NTRS1984

Emission FTIR analyses of thin microscopic patches of jet fuel residue deposited on heated metal surface

Deposits laid down in patches on metal strips in a high pressure/high temperature fuel system simulator operated with aerated fuel at varying flow rates were analyzed by emission FTIR in terms of functional groups. Significant differences were found in the spectra and amounts of deposits derived from fuels to which small concentrations of oxygen-, nitrogen-, or sulfur-containing heterocyclics or metal naphthenates were added. The spectra of deposits generated on strips by heating fuels and air in a closed container were very different from those of the flowing fluid deposits. One such closed-container dodecane deposit on silver gave a strong surface-enhanced Raman spectrum.

Lauer, J. L.↗
NASA NTRS1982

Flexible substrate for printed wiring

A very flexible substrate for printed wiring is disclosed which is composed of a blend of phenoxy resin-polyisocyanate-brominated epoxy resin in which the equivalent ration of the functional groups is hydroxyl grouped: isocyanate group: epoxy group = 1:0.2 to 2:0.5 to 3. The product has outstanding solder resistance and is applied to metal without using adhesives.

Asakura, M.↗
NASA NTRS1985

The chemistry of Li/SOCl2 cells - An ESR study of carbon electrodes

Carbon electrodes from Li/SOCl2 cells were studied by electron spin resonance after various stages of discharge. Different behavior was observed in the temperature-dependent part of the ESR linewidth, defined as 'intrinsic linewidth', Delta H(int), when two different electrolytes were used. With one electrolyte, 1.5M LiAlCl4/SoCl2, the Delta H(int) value stayed constant or slightly decreased whereas with another electrolyte, 1.0M LiAlCl4/14 percent BrClin SOCl2, the value increased as discharge progressed. The carbon electrodes are modified differently during discharge with these two electrolytes, and it is speculated that this may be due to changes in the carbon matrix functional groups. This difference in the carbon electrodes may explain the claimed differences in safety performance of the cells.

Kim, S. S.↗
NASA NTRS1985

Characterization of carbon fibers and fiber-matrix adhesion in composites

The effect of fiber/matrix interactions on the mechanical properties of thermoplastic carbon fiber composites was determined. The experimental approach was a multi-faceted one involving the following areas: characterization of the surface of carbon fibers using X-ray photoelectron spectroscopy (XPS), secondary ion mass spectroscopy (SIMS) and scanning transmission electron microcopy (STEM); determination of the functional groups on carbon fiber surfaces using an elemental tagging scheme - derivatization; determination of the polar and dispersion contribution to the surface energy of carbon fibers by measuring wetting forces in a series of liquids having known polar and dispersion components; and study of the interaction of thermoplastic polymers with carbon surfaces by solution adsorption, STEM and fiber critical length.

Wightman, J. P.↗
NASA NTRS1986

Improved perfluoroalkylether fluid development

The feasibility of transforming a commercial linear perfluoroalkylether fluid into a material stable in the presence of metals and metal alloys in oxidizing atmospheres at 300 C without the loss of the desirable viscosity temperature characteristics was determined. The approach consisted of thermal oxidative treatment in the presence of catalyst to remove weak links, followed by transformation of the created functional groups into phospha-s-triazine linkages. It it found that the experimental material obtained in 66% yield from the commercial fluid exhibits, over an 8 hr period at 300 C in the presence of Ti(4Al, 4Mn) alloy, thermal oxidative stability better by a factor of 2.6x1000 based on volatiles evolved than the commercial product. The viscosity and molecular weight of the developed fluid are unchanged and are essentially identical with the commercial material. No metal corrosion occurs with the experimental fluid at 300 C.

Jones, W. R., Jr.↗
NASA NTRS1986

Computer-Aided Modeling and Analysis of Power Processing Systems (CAMAPPS). Phase 1: Users handbook

The EASY5 macro component models developed for the spacecraft power system simulation are described. A brief explanation about how to use the macro components with the EASY5 Standard Components to build a specific system is given through an example. The macro components are ordered according to the following functional group: converter power stage models, compensator models, current-feedback models, constant frequency control models, load models, solar array models, and shunt regulator models. Major equations, a circuit model, and a program listing are provided for each macro component.

Kim, S.↗
NASA NTRS1985

Realistic training for effective crew performance

Evaluation of incident and accident statistics reveals that most problems occur not because of a lack of proficiency in pilot training, but because of the inability to coordinate skills into effective courses of action. Line-Oriented Flight Training (LOFT) and Cockpit Resource Management (CRM) programs provide training which will develop both individual crew member skills, as well as those associated with effective group function. A study conducted by NASA at the request of the U.S. Congress supports the argument for training that enhances crew performance in addition to providing individual technical skills, and is described in detail.

Foushee, H. C.↗
NASA NTRS1987

Micro and macro approaches to tough polymers for composites

The progress to date on the development of techniques to toughen continuous thermoplastic composites is summarized. The work, using the approach of toughening the polycarbonate composite matrix with rubber particles, has focused on determining the differences between Double Cantilever Beam (DCB) samples molded inhouse and those molded by NASA. Specifically, an effort was made to account for the differences in fracture toughness observed between the various specimens. In addition, preliminary results of tensile dilatometry tests are described; these tests suggest that processes leading to increased volume and enhanced shear banding are occurring within the rubber toughened system. The results of the effort using another approach, the preparation of random block copolycarbonates, are presented. The synthetic route to these species was modified so that higher molecular weights of these materials can be obtained. In addition, an attempt is being made to determine the exact block length or the number of functional groups in the oligomers since this procedure also should lead to high molecular weight materials. Dynamic mechanical analysis of the copolymer prepared so far indicates that the scale of cooperative molecular motion of the PBA polycarbonate at sub-Tg temperatures is larger than five monomer units. Efforts to find a suitable rubber-toughener for a thermoset system (bismaleimides) is also discussed. Included is a description of the various tougheners intended for use or currently being used.

Yee, Albert F.↗
NASA NTRS1988

Stabilizing PFAE Against Oxidation

Process makes commercial perfluoroalkylether (PFAE) hydraulic fluid more stable in presence of metals in hot oxidizing atmospheres. Consists of thermal oxidation in presence of catalyst to remove weak links, followed by transformation of newly-created functional groups into phospha-s-triazine linkages, which impart antioxidation and anticorrosion properties. A 66-percent yield of stable PFAE obtained. Fluid used as lubricant, grease, or hydraulic fluid at temperatures from -55 to +300 degree C in presence of metals in oxidizing atmosphere.

Jones, W. R., Jr.↗
NASA NTRS1987

Improved perfluoroalkyl ether fluid development

The feasibility of transforming a commercial linear perfluoroalkylether fluid into a material stable in the presence of metals and metal alloys in oxidizing atmospheres at 300 C without the loss of the desirable viscosity temperature characteristics was determined. The approach consisted of thermal oxidative treatment in the presence of catalyst to remove weak links, followed by transformation of the created functional groups into phospha-s-triazine linkages. It is found that the experimental material obtained in 66 percent yield from the commercial fluid exhibits, over an 8 hr period at 300 C in the presence of Ti(4Al, 4Mn) alloy, thermal oxidative stability better by a factor of 2.6 x 1000 based on volatiles evolved than the commercial product. The viscosity and molecular weight of the developed fluid are unchanged and are essentially identical with the commercial material. No metal corrosion occurs with the experimental fluid at 300 C.

Jones, William R., Jr.↗