Search NASA⌕ Search

SEARCH · Search NASA

Results for “gap analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

The water use of data center workloads: A review and assessment of key determinants

The global importance of data center water use is increasing with the rapid growth of digitalization and artificial intelligence. This study analyzes the factors influencing workload-level water use, measured in liters consumed per workload, to guide water-saving strategies in data centers. Our findings reveal workload-level water use variations exceeding 10,000-fold, driven by over 1000-fold differences in water consumption per kilowatt hour of server electricity consumed and approximately 10-fold differences in server workload efficiency. Key determinants are ranked as server efficiency, electrical grid water consumption factors, server utilization, cooling system type, infrastructure efficiency, climate zone, inactive server percentage, and server refresh cycle. Notably, there is no single recipe for minimizing water use; instead, optimal outcomes depend on tailored combinations of these factors. This analysis addresses critical knowledge gaps by identifying the determinants of data center water use and exploring their achievable minima under diverse site-specific constraints.

Data centers↗
DOE OSTI2026

Crystal Growth of Quaternary RE 2 EuSi 2 S 8 ( RE = Ce–Nd, Sm, Gd, Tb) Using Flux-Assisted Boron Chalcogen Mixture (BCM) Method: Investigation of Magnetic and Luminescence Properties

A series of quaternary rare-earth containing thiosilicates with the general formula RE 2 EuSi 2 S 8 (RE = Ce–Nd, Sm, Gd, Tb) has been synthesized via the flux-assisted boron chalcogen mixture (BCM) crystal growth method. High-quality single crystals were obtained, and their crystal structures were determined by single-crystal X-ray diffraction. The RE 2 EuSi 2 S 8 series crystallizes in the trigonal system, adopting the space group R-3c. Polycrystalline samples were employed for physical property measurements, including magnetic susceptibility measurements, UV–visible diffuse reflectance, and photoluminescent response. Magnetic data of RE 2 EuSi 2 S 8 ( RE = Ce, Nd, and Gd) were collected over the 2–300 K temperature range. The samples were paramagnetic behavior with negative Weiss constants (θ W = −11.05, −10.55, and −1.35 K respectively). Their thermal stability was investigated using thermogravimetric analysis (TGA). Optical band gaps, estimated from diffuse reflectance spectra, were determined to be 2.2(1) eV for Ce 2 EuSi 2 S 8 , 1.8(1) eV for Nd 2 EuSi 2 S 8 , and 1.7(1) eV for Gd 2 EuSi 2 S 8 respectively. Finally, photoluminescence measurements were collected on Ce 2 EuSi 2 S 8 and Tb 2 EuSi 2 S 8 single crystals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Flux-Assisted Boron Chalcogen Mixture (BCM) Method for Synthesizing Mixed Chalcogenide Semiconductors (AkRE 2 Si 2 Se x S 8– x and CaRE 2 Si 2 Se 8 ) ( Ak = Ca and Sr; RE = La, Ce, Pr, Nd, and Sm): Investigation of Their Magnetic and Optical Properties

We report a detailed structural analysis of a series of ten quaternary rare-earth-containing seleno-thiosilicates AkRE 2 Si 2 Se x S 8-x and selenosilicates, CaRE 2 Si 2 Se 8 (Ak = Ca and Sr; RE = La, Ce, Pr, Nd, and Sm). Single crystals were obtained by using the flux-assisted boron chalcogen mixture (BCM) method and single crystal X-ray diffraction was used to determine their structures. All members of the AkRE 2 Si 2 Se x S 8-x and CaRE 2 Si 2 Se 8 series crystallize in the space group R$\bar{3}$c (space group number 167) of the trigonal crystal system. The single-crystal X-ray diffraction analysis revealed a strong preference for Se/S atoms to occupy one vs. the other of the two available sites. Polycrystalline samples were used for magnetic susceptibility and UV–visible diffuse reflectance measurements. Magnetic measurements show that CaCe₂Si₂Se₁.₇₃S₆.₂₇ and CaNd₂Si₂Se₂.₅S₅.₅ are paramagnetic with negative Weiss constants (θ = –60.1 and –26.2). Diffuse reflectance analysis gives optical band gaps of 2.7(1) eV (CaLa₂Si₂Se₂.₃₈S₅.₆₂), 2.2(1) eV (CaCe₂Si₂Se₁.₇₃S₆.₂₇), 2.5(1) eV (CaNd₂Si₂Se₂.₅S₅.₅), and 2.0(1) eV (CaCe₂Si₂Se₈), consistent with density functional theory calculations. By partially or fully replacing S sites with Se it was possible to achieve band gap tuning. Photoluminescence behavior was also investigated for CaCe 2 Si 2 Se 1.73 S 6.27 via irradiation with 375 nm ultraviolet light.

BCM method↗
DOE OSTI2026

OmicsMLMentor: A Web Application for Guided Machine Learning Analysis of Omics Data

Expression-based omics technologies (e.g. proteomics, metabolomics, transcriptomics, etc.) increasingly rely on supervised and unsupervised machine learning (ML) models to find key biomolecules distinguishing conditions, identify natural groupings in biological data, or generate predictions for outcomes of interest. Fitting ML models to omics data presents several challenges, including handling missing data, selecting a normalization method, choosing a valid model, and optimizing hyperparameters, all requiring statistical programming skills to address these challenges. Thus, the open-source web application SLOPE was designed to lower the barrier to ML modeling for omics data. SLOPE supports the fitting of 15 ML models (10 supervised and 5 unsupervised) tailored to omics datasets, such as proteomics, metabolomics, lipidomics, and transcriptomics. SLOPE offers several omics-specific features, including methods for handling missingness (imputation, conversion, removal), normalization tests, ranking of models based on the structure of a user’s data and user input, and optimal hyperparameter selections using cross-validation splits. By streamlining ML workflows for omics analysis, SLOPE address critical gaps in existing online web tools, facilitating a broader adoption of these models for omics research. Here, SLOPE is applied to data from a lignin exposure study to highlight the workflow for fitting both supervised and unsupervised models to data.

lipidomics↗
DOE OSTI2026

Coexisting kagome and heavy fermion flat bands in YbCr 6 Ge 6

Flat bands, electronic states with nearly dispersionless energy-momentum structure, provide fertile ground for unconventional quantum phases. Recent observations of flat bands at the Fermi level in kagome metals open the possibility of unifying topology and correlation-driven heavy-fermion physics. Here we show that topology and heavy-fermion correlations coexist in the layered kagome metal YbCr 6 Ge 6 . At high temperatures, an intrinsic kagome flat band—arising from frustrated hopping on the kagome lattice—dominates the Fermi level. Upon cooling, localized Yb 4f-states hybridize with the topological kagome flat bands, transforming this state into momentum-independent Kondo resonance states across the entire Brillouin zone. Topological analysis of the hybridization gaps reveals filling-tunable weak and strong topological Kondo-insulating regimes, and identifies a topological Dirac–Kondo semimetal. Taken together, these results identify YbCr 6 Ge 6 as a prototype of a topological heavy-fermion system and a platform where geometric frustration, strong correlations, and topology converge, with broad implications for correlated quantum matter.

36 MATERIALS SCIENCE↗
DOE OSTI2025

MURR LEU structural and thermal hydraulics analyses: Part I – Preliminary irradiation thermo-mechanical behavior

The University of Missouri Research Reactor (MURR) is expected to be converted from highly enriched uranium (HEU, ≥ 20 wt% U-235) U-Al x dispersion fuel to low-enriched uranium (LEU, < 20 wt% U-235) with U-10Mo monolithic fuel. This work introduces high-fidelity irradiation thermo–mechanical (T-M) analysis of the MURR LEU focusing on changes in coolant channel gap thickness. Three-dimensional (3D) finite element (FE) models were developed to simulate the irradiation T-M behavior of the MURR LEU element with all 23 curved fuel plates, the two side plates, and the combs. It was shown that channel gap thickness changes were influenced not only by plate thickness variations due to fuel swelling and creep but also by the radial displacement of consecutive MURR LEU plates. Modeling the fuel element assembly captured side plate displacements, which were shown to reduce radial fuel plate displacements towards the convex side. The maximum local radial displacement in the element was predicted at the end of life (EOL) as 23.7 mil (602.0 µm) on the lateral centerline of plate 23 towards the convex side. The maximum stripe-averaged reduction in channel gap thickness, particularly relevant for thermal hydraulics (TH) safety analysis, was calculated as 15.9 mil (403.9 µm) in single-side heated channel 24 (the outermost channel). These results account for the thermal resistance from the oxide build-up on cladding surfaces which was shown to be up to 0.82 mil (20.8 µm) thick. It was demonstrated that accounting for oxide layer thermal resistance led to a 10 °C higher peak fuel temperature and a 4.4 mil (111.8 µm) greater maximum local radial displacement. The impact of the calculated channel gap thickness changes on the MURR LEU TH safety analysis is evaluated in Part II.

Irradiation thermo-mechanical analysis↗
DOE OSTI2025

Impact of charge-density-wave pattern on the superconducting gap in Vanadium-based kagome superconductors

Kagome metals AV 3 Sb 5 (A = K, Rb, Cs) provide a compelling platform to explore the interplay between superconductivity (SC) and charge-density-wave (CDW) orders. While distinct CDW orders have been identified in K/RbV 3 Sb 5 versus CsV 3 Sb 5 , their influence on the SC order parameter remains unresolved. Here, we investigate low-energy quasiparticle excitations in AV 3 Sb 5 , uncovering a striking difference in SC gap anisotropy: K/RbV 3 Sb 5 exhibit fully gapped, nearly isotropic s-wave states, in contrast to the strongly anisotropic SC gap in CsV 3 Sb 5 . Impurity scattering introduced via electron irradiation in K/RbV 3 Sb 5 has a minimal impact on low-energy excitations, and it induces an increase in the SC transition temperature T c , consistent with more isotropic s-wave SC competing with CDW order. Our theoretical analysis attributes the observed SC gap anisotropy differences to distinct CDW modulation patterns: the star-of-David structure unique to CsV 3 Sb 5 preserves van Hove singularities near the Fermi level, promoting anisotropic s-wave SC with enhanced T c via bond-order fluctuations. These findings establish a systematic framework for understanding the interplay between SC and CDW orders in AV 3 Sb 5 , driven by electron correlations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Hydrogen Infrastructure Analysis for the Port Applications [Slides]

The International Maritime Organization has committed to 50% reduction in GHG emissions by 2050 worldwide as of 2023. This analysis includes performing an inventory and modeling efforts to understand the energy, equipment and cost requirements to support decarbonization of cargo handling and shore power at U.S. Ports, along with assessment of zero- and near- zero emission fuel supplies at or near U.S. ports focused upon Hydrogen technologies. Initial market assessment for ocean going vessels for harbor support and ocean-going vessels is explored. An energy analysis is performed on the port system using a holistic approach and considering the port as an entire ecosystem that functions as a transportation and energy node. Presently, a comprehensive view is lacking for future analysis efforts, this analysis seeks to address this gap in data by evaluating four representative port types and the potential for utilizing hydrogen for the maritime industry. Every port is different, but broadly they could be bracketed into reference cases with scaling factors for the relative size of the port operations. These reference ports are for future use, potentially as baselines for analysis and development of demonstration programs. An equipment inventory for each reference port type (container, bulk, breakbulk, and inland waterway) is presented. A comparative analysis of fuel cell electric and battery electric equipment is conducted based on the following criteria: technology readiness level, refueling/charging time, operational range, energy consumption, and fuel cost savings compared to baseline internal combustion engine equipment. The tradeoffs and synergies between two alternative powertrains is highlighted. Based on energy and infrastructure analysis, average and high equipment utilization profiles across different port types is identified and quantified baseline fuel and electricity demand for various decarbonization scenarios. Based on the portfolio of equipment converted to fuel cell electric, the estimates of initial capital investment are provided for hydrogen refueling stations across ports. An energy demand model is developed that predicts well the all-electric cargo handling equipment annual energy consumption for ports with annual tonnage under 2 million twenty-foot equivalent units (TEUs). The model is a good rubric to follow for further energy demand models that can create a scalable solution to understand the energy needs of cargo handling equipment, whether they are all-electric, hydrogen fuel cell, or powered by another fuel-type. Zero and near-zero emission fuel supply at ports is evaluated looking into the characteristics of hydrogen, ammonia, and methanol as an alternative fuel, as well as the bunkering status. The readiness of reference ports to produce ammonia or methanol and bunker the fuel is examined based on the framework developed by the Global Maritime Forum and Rocky Mountain Institute.

08 HYDROGEN↗
DOE OSTI2024

Where are the Data? Automating a Workflow for Carbon Storage Data Gap Analyses

This presentation demonstrates a spatial analysis workflow to assess data availability for the many components of geologic carbon storage technical viability. The workflow relies upon a knowledge-data framework that links the different components of GCS technical viability to the data types needed for evaluation. Using this contextual information, a combination of data science methods (e.g., natural language processing) and spatial analyses are applied to identify areas where sufficient data exists for a given component. The results are aggregated into maps illustrating data density and spatial gaps across all technical viability factors and data categories, as well as the individual component and category level for a more nuanced understanding. Presented at the FECM NETL Carbon Management Program Review Meeting 2024.

Creason, Christopher↗
DOE OSTI2024

Where are the Data? Automating a Workflow for Carbon Storage Data Gap Analyses

This presentation demonstrates a spatial analysis workflow to assess data availability for the many components of geologic carbon storage technical viability. The workflow relies upon a knowledge-data framework that links the different components of GCS technical viability to the data types needed for evaluation. Using this contextual information, a combination of data science methods (e.g., natural language processing) and spatial analyses are applied to identify areas where sufficient data exists for a given component. The results are aggregated into maps illustrating data density and spatial gaps across all technical viability factors and data categories, as well as the individual component and category level for a more nuanced understanding. Presented at the Geological Society of America Connects 2024 Annual Meeting in Anaheim, California, 22-25 September 2024.

Creason, Christopher↗
DOE OSTI2025

Environmental and socio-economic Pareto-front trade-off analysis of U.S. PET packaging material in a circular economy

Various recycling technologies are emerging to implement circular economy in plasticssupply chain systems. However, the environmental and socio-economic trade-offs of in circular economy are not well understood at a systems level. Particularly, quantifying these trade-offs as a function of end-of-life (EOL) management decisions, including transition of recycling technologies, systems level metrics such as circularity, recycled content, and the need for fossil-derived plastics are not well understood. Here, the present study addressed these research gaps by applying a systems analysis modeling approach that utilizes material flow analysis, life cycle assessment, socioeconomic data, and system optimization techniques for polyethylene terephthalate (PET) packaging supply chains in the United States. Pareto-front trade-offs between conflicting environmental and socio-economic impacts as well as those between socioeconomic impacts and circularity were explored using the epsilon constraint method. The Pareto-front trade-off analysis revealed the transition of EOL management strategies for PET packaging systems, including changes in selection of recycling technologies, to aid decision making process by quantifying studied system metrics. Transitioning from environmentally optimal to socio-economically optimal systems led to increased employment (by 17%), wages (by 26%), and revenues (by 6%) but also led to increased global warming potential (GWP; by 65%), energy consumption (by 59%), and reliance on fossil PET in the system (by 78%). Finally, the results show that there is not a unique set of recycling technologies to achieve a sustainable circular economy of PET packaging system, instead it depends on the decision maker’s objectives and targeted metrics of the system.

54 - ENVIRONMENTAL SCIENCES/GLOBAL CLIMATE CHANGE ↗
DOE OSTI2026

AGR-5/6/7 Thermal Model with Non-uniform Gas Gaps

The daily as-run thermal analysis for the Advanced Gas Reactor (AGR)-5/6/7 experiment was documented in ECAR-5633 (Hawkes 2021). A finite element model was created for the entire test train, which consisted of five capsules. The fuel compacts, graphite holders, stainless-steel capsule walls, and all other major components were individually modeled, including all thermocouples (TCs). Daily heat rates for each compact and component in the model were input from daily as-run physics analyses. Daily gas compositions for each capsule were also input. The thermal conductivity of the compacts and graphite holders varied with fast neutron fluence. Gas mixture thermal conductivity was implemented using experimentally attained values from the literature. Fluence and temperature-dependent thermal conductivity was used for the graphite components and the fuel compacts. Radiation heat transfer was implemented. The model was tuned in an attempt to match the TC readings during the first cycle by adjusting the Neolube (graphite lubricant) thickness.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2026

IR side of bounds on theories with spontaneously broken Lorentz symmetry

In nature, some UV features of dynamics are reflected in IR quantities. In fully relativistic theories, this connection can be probed through the analyticity properties of scattering amplitudes, allowing one to understand which IR theories respect the UV assumptions of quantum field theory. The ensuing analyticity bounds can usually be rephrased as the absence of faster-than-light propagation for low-energy excitations. While it is interesting to understand these relations and their IR characterization for theories that have less idealized properties, it is also more difficult to derive analyticity bounds in these cases. For theories that spontaneously break Lorentz symmetry, recent progress was made by considering correlators of conserved currents and their analyticity properties. In this work, we focus on such theories and work to close the gap from the IR side, finding a natural way to express the known analyticity bounds purely in terms of low-energy kinematical quantities. Our analysis shows that the bounds require gapped excitations to have a slower speed than the gapless ones, at least for momenta that are low with respect to the mass gap. These results suggest a way to interpret the UV/IR connection in more complex theories.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Technoeconomic Analysis of Kraft Pulp Mill Integration with an Advanced Nuclear Reactor

This study focuses on post-combustion capture and oxy-fuel combustion for the boilers at the mill, as well as steam integration with the nuclear power plant. The primary goal of the research outlined in this report is to design, analyze, and document the integration of industrial-scale HTGR with a reference Kraft Pulp Mill. The purpose is to deliver reliable, cost-effective, and sustainable clean energy alternatives while reducing CO2 emissions. Specifically, this study focuses on 6 different scenarios that include carbon capture equipment and some of them use nuclear power to meet the heat and electricity needs of the reference plant. Also, 2 of these scenarios are created while also producing clean hydrogen through integrated High-Temperature Steam Electrolysis (HTSE). This report offers a detailed techno-economic assessment of different scenarios for a Kraft Pulp Mill, including an analysis of tax credits (section 45V, 45Q, and 48E) provided by the Inflation Reduction Act (IRA) of 2022. The evaluation explores the potential economic benefits and challenges of incorporating different configurations, including nuclear energy, into Kraft Pulp Mill operations, with particular attention to energy efficiency, economic implications, and environmental impact. By assessing both the technical feasibility and economic viability, this analysis aims to identify existing gaps and propose solutions for the successful implementation of nuclear integration. The findings are intended to provide valuable insights for stakeholders considering the adoption of advanced nuclear reactors in the pulp and paper industries.

08 HYDROGEN↗
DOE OSTI2025

Assessing hydrogen supply chains: An integrated review of leakage and energy efficiency studies

This paper examines hydrogen leakage and efficiency across the supply chain for liquid, gaseous, and mixed hydrogen systems. These factors are crucial for assessing hydrogen's role in mitigating emissions and facilitating a clean energy transition. Drawing on a comprehensive review of existing literature and model-based analysis, the study compiles leakage rates and efficiency metrics at each stage of the supply chain: production, storage, transmission, distribution, and end-use. These data inform system scenarios that estimate the impact of leakage on overall performance and climate benefits. The analysis also identifies persistent data gaps, particularly for liquid and mixed system configurations, and outlines priorities for future research. A comparison of hydrogen system types shows that gaseous pathways generally achieve the highest efficiencies (28 %–39 %) and the lowest leakage rates (∼4.5 %) across the supply chain. Liquid hydrogen systems, while favorable for long-distance and high-volume transport due to their higher energy density, exhibit lower efficiency (∼28 %) and a greater leakage potential (∼12 %). Mixed systems, which combine gaseous and liquid elements (e.g., pipeline transmission followed by liquefaction and truck distribution), show compounded energy losses and moderate-to-high leakage rates (6.8 %–9.4 %), highlighting trade-offs associated with added system complexity. The study highlights opportunities for technological advancements, including optimizing liquefaction, enhancing insulation for storage and transportation, and refining refueling equipment. These improvements are crucial for maximizing the climate benefits of hydrogen. The results offer actionable insights for researchers, industry, and policymakers working to develop low-leakage, high-efficiency hydrogen infrastructure.

08 HYDROGEN↗
DOE OSTI2025

Incorporating corrosion design constraints in desalination process optimization: A case study in mechanical vapor compression

Corrosion is an expensive and complex challenge for desalination, yet current design approaches do not explicitly account for corrosion mechanisms in process modeling and technoeconomic analysis. Here, to address this gap, we present a workflow for incorporating corrosion design constraints directly into desalination process optimization models. We develop surrogate models for general and localized corrosion metrics as functions of temperature, pH, salinity, dissolved oxygen, and material using data from OLI Systems’ Corrosion Analyzer. We then integrate these surrogates as corrosion design constraints in a cost-optimization MVC model that minimizes the levelized cost of water (LCOW). For a case study of mechanical vapor compression (MVC) treating seawater across a range of recoveries, we find dissolved oxygen (DO) is the dominant driver of localized corrosion, and thus of cost-optimal material choice and operating conditions. Reducing the DO from 8 mg/L to 0.5 mg/L reduces the LCOW by 15-35%, informing the breakeven costs for implementing DO removal or selecting highly corrosion-resistant alloys. This framework is broadly applicable across corrosion types, materials, and components and enables desalination process design that minimizes capital costs.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Data-driven analysis to understand GPU hardware resource usage of optimizations

With heterogeneous systems, the number of GPUs per chip increases to provide computational capabilities for solving science at a nanoscopic scale. However, low utilization for single GPUs defies the need to invest more money in expensive accelerators. Although related work develops optimizations to improve application performance, none studies how these optimizations impact hardware resource usage or average GPU utilization. Here, this paper takes a data-driven analysis approach in addressing this gap by (1) characterizing how hardware resource usage affects device utilization, execution time, or both, (2) presenting a multiobjective metric to identify important application-device interactions that can be optimized to improve device utilization and application performance jointly, (3) studying hardware resource usage behaviors of several optimizations for a benchmark application, and finally (4) identifying optimization opportunities for several scientific proxy applications based on their hardware resource usage behaviors. Furthermore, we demonstrate the applicability of our methodology by applying the identified optimizations to a proxy application, which improves the execution time, device utilization, and power consumption by up to 29.6%, 5.3% and 26.5% respectively.

Computer science↗
DOE OSTI2025

Assessing High Burnup U-19Pu-10Zr Fuel Performance against Historical and Modeled Behavior

Advancing the deployment of sodium-cooled fast reactors (SFRs) requires thorough testing of metallic fuel pins under accident conditions to establish safe operational limits of high burnup fuel. To conduct transient testing, a comprehensive understanding of steady-state fuel behavior obtained through both experimental characterization and accurate predictive capabilities is needed. This study comparatively assesses the steady-state irradiation performance of two high burnup U-19Pu-10Zr fuel pins, DP-36 and DP-40, irradiated under prototypic fast reactor conditions in preparation for planned safety testing at the Transient Reactor Test Facility. Since DP-40 was designated for use in the test and DP-36 serves as its sibling pin, non-destructive, engineering-scale post-irradiation examinations (PIE) were conducted on both pins while destructive examinations were performed exclusively on DP-36. The results were then assessed against historical performance data from similar fuel pins irradiated in the Experimental Breeder Reactor-II. Additionally, the steady-state irradiation of each pin was modeled using the BISON fuel performance code to assess the accuracy of current modeling capabilities in predicting the baseline irradiation behavior. Non-destructive examinations included neutron radiography to measure fuel column elongation, gamma scanning to verify pin integrity and fission product migration, and profilometry to assess dimensional changes. Benchmarking against existing PIE data revealed consistent patterns in axial fuel column growth and cladding diametral strain, though both pins exhibited longer low-density “fluff” structures, which can have implications for core reactivity and source term calculations. Destructive examinations on DP-36 included fission gas release analysis and sectioning for optical microscopy, which showed more complex constituent redistribution patterns than the traditionally accepted 3-ring model. The axial evolution of fractional areas and porosities of each of the redistributed zones were quantified and presented. Modeling comparisons showed agreement in fractional fission gas release but consistently overestimated axial and radial swelling and disagreed with measured axial porosity patterns. These conservative overpredictions suggested that the pins would appear closer to failure or operational limits at the start of transient tests, potentially leading to higher strain accumulation during the transient. While conservative estimates provide safety margins, they can negatively impact fuel economics. A review of the swelling models identified areas for improvement in the gaseous swelling, solid swelling, and fuel hot-pressing models when applied to ternary fuel. The results of this study highlight the critical importance of conducting pre-test characterization on both test and sibling pins to accurately capture steady-state fuel behavior, providing a precise baseline for post-test evaluations and essential inputs for transient modeling of the planned experiments. The analysis also revealed significant data gaps that require further investigation to enhance the understanding and prediction of fuel swelling and pore dynamics. Collecting comprehensive data across different irradiation conditions, burnup levels, and fuel compositions are essential for refining existing models and developing mechanistic models for both binary and ternary metallic fuels, ultimately improving the integration of modeling and experimental approaches in accident testing.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗