Search NASA⌕ Search

SEARCH · Search NASA

Results for “geometric phases”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Airflow Model Testing to Determine the Distribution of Hot Gas Flow and O/F Ratio Across the Space Shuttle Main Engine Main Injector Assembly

Engine 0209, the certification engine for the new Phase 2+ Hot Gas Manifold (HGM), showed severe deterioration of the Main Combustion Chamber (MCC) liner during hot fire tests. One theory on the cause of the damage held that uneven local distribution of the fuel rich hot gas flow through the main injector assembly was producing regions of high oxidizer/fuel (O/F) ratio near the wall of the MCC liner. Airflow testing was proposed to measure the local hot gas flow rates through individual injector elements. The airflow tests were conducted using full scale, geometrically correct models of both the current Phase 2 and the new Phase 2+ HGMs. Different main injector flow shield configurations were tested for each HGM to ascertain their effect on the pressure levels and distribution of hot gas flow. Instrumentation located on the primary faceplate of the main injector measured hot gas flow through selected injector elements. These data were combined with information from the current space shuttle main engine (SSME) power balances to produce maps of pressure, hot gas flow rate, and O/F ratio near the main injector primary plate. The O/F distributions were compared for the different injector and HGM configurations.

Mahorter, L.↗
NASA NTRS1981

Theoretical interpretation of photometric properties of the Martian surface and atmosphere

Earth-based UBV photometry, photographs from the Lowell Observatory, and Mariner 9 data are combined with a new radiative transfer theory to derive physical parameters for the Martian surface and atmosphere, both before and during the 1971 dust storm. Storm dust particles had a single scattering albedo of 0.84 plus or minus 0.02 and an asymmetry factor of 0.35 plus or minus 0.10 in green (V) light. The geometric albedo of Mars was 0.15 and the phase integral 1.83, yielding 0.27 for the Bond albedo. The mean optical thickness of the 'clear' atmosphere averaged over the whole planet was 0.15 plus or minus 0.05 and was not dependent on wavelength. Geometric albedos for the surface are 0.25 (light areas) and 0.17 (dark areas) in V, 0.095 in B, and 0.060 in U. The soil particles are moderately backward scattering with an asymmetry factor of minus 0.20, and therefore rather opaque. The mean surface roughness is 0.57, representing the depth/radius ratio of an average hole, and being only one-half as large as values typical for the moon and asteroids.

Lumme, K.↗
NASA NTRS2016

Scheduling Observations of Celestial Objects for Earth Observing Sensor Calibration

Radiometric calibration of Earth-observing satellite sensors is critical for tracking on-orbit gain changes through- out the satellite's mission. The Moon, being a stable, well-characterized radiometric target, has been used effectively for tracking the relative gain changes of the reflective solar bands for the Moderate Resolution Imaging Spectroradiometer (MODIS) on board EOS AM-1 (Terra) and PM-1 (Aqua). The Moon is viewed through the MODIS space-view port, and the relative phase of the Moon is restricted to within 0.5 degrees of a chosen target phase to increase the accuracy of the calibration. These geometric restrictions require spacecraft maneuvers in order to bring space-view port into proper alignment with the position of the Moon when the phase requirement is met. In this paper, we describe a versatile tool for scheduling such maneuvers based on the required geometry and lunar phase restrictions for a general spacecraft bound instrument. The results of the scheduling tool have been verified using lunar images from Aqua and Terra MODIS after a scheduled roll maneuver was performed. This tool has also been tested for the Visible Infrared Imaging Radiometer Suite (VIIRS) and the Advanced Technology Microwave Sounder on-board the Suomi-NPP spacecraft. As an extension of this work, we have also developed a tool for scheduling views of bright stars. These stars provide another well-characterized radiometric source that can be used for sensor calibration. This tool has been implemented to determine the times in which a chosen star can be viewed by the high gain stages of the day/night band for the VIIRS instrument.

Wilson, Truman↗
NASA NTRS1993

Phase space localization for anti-de Sitter quantum mechanics and its zero curvature limit

Using techniques of geometric quantization and SO(sub 0)(3,2)-coherent states, a notion of optimal localization on phase space is defined for the quantum theory of a massive and spinning particle in anti-de Sitter space time. It is shown that this notion disappears in the zero curvature limit, providing one with a concrete example of the regularizing character of the constant (nonzero) curvature of the anti-de Sitter space time. As a byproduct a geometric characterization of masslessness is obtained.

Elgradechi, Amine M.↗
NASA NTRS1993

Global color views of Mars

About 1000 Viking Orbiter red and violet filter images have been processed to provide global color coverage of Mars at a scale of 1 km/pixel. Individual image frames acquired during a single spacecraft revolution ('rev') were first processed through radiometric calibration, cosmetic cleanup, geometric control, reprojection, and mosaicking. A total of 57 'single-rev' mosaics have been produced. Phase angles range from 13 to 85 degrees. All the mosaics are geometrically tied to the Mars digital image mosaic (MDIM), a black-and-white base map with a scale of 231 m/pixel.

Mcewen, A. S.↗
NASA NTRS2001

Nonlinear Thermomechanical Response of Composite Panels with Continuous and Terminated Stiffeners

A two-phase approach and a computational procedure are used for predicting the variability of the response of stiffened composite panels associated with variations in the geometric and material parameters of the structures. In the first phase, hierarchical sensitivity analysis is used to identify the major parameters that have the most effect on the response quantities of interest. In the second phase, the major parameters are taken to be fuzzy parameters, and a fuzzy set analysis is used to determine the range of variation of the response, associated with preselected variations in the major parameters. Numerical results are presented showing the variability of the response of panels with both continuous and terminated stiffeners associated with variations in the micro mechanical and geometric parameters. Both flat and curved panels are considered.

Noor, Ahmed K.↗
NASA NTRS2013

Open Vehicle Sketch Pad Aircraft Modeling Strategies

Geometric modeling of aircraft during the Conceptual design phase is very different from that needed for the Preliminary or Detailed design phases. The Conceptual design phase is characterized by the rapid, multi-disciplinary analysis of many design variables by a small engineering team. The designer must walk a line between fidelity and productivity, picking tools and methods with the appropriate balance of characteristics to achieve the goals of the study, while staying within the available resources. Identifying geometric details that are important, and those that are not, is critical to making modeling and methodology choices. This is true for both the low-order analysis methods traditionally used in Conceptual design as well as the highest-order analyses available. This paper will highlight some of Conceptual design's characteristics that drive the designer s choices as well as modeling examples for several aircraft configurations using the open source version of the Vehicle Sketch Pad (Open VSP) aircraft Conceptual design geometry modeler.

Hahn, Andrew S.↗
NASA NTRS1977

Photometry of satellite surfaces

A review is presented of basic photometric concepts as they apply to the study of the surfaces of natural satellites. The analysis of brightness variations related to changes in solar phase angle, the longitude of the satellite in its orbit about the primary, and other factors is discussed, together with the derivation of phase integrals. The method used to determine geometric albedos is outlined, and major uncertainties in determined values are considered. Photometric results obtained for satellites of Mars and Jupiter are summarized. Leading side/trailing side brightness trends characteristic of the inner satellites of these planets and lightcurve color amplitude trends are examined. Priority areas for future photometric studies are identified.

Veverka, J.↗
NASA NTRS1981

Observing chemical abundances in comets

The atomic resonance lines of the major elements were observed in the atmospheres of a few comets, by using vacuum ultraviolet spectrographs on board rockets or orbiting observatories. Dust-to-gas ratios were also deduced for two comets through a Finson-Probstein's analysis of their dust-tail isophotes. The geometric albedo of the dust for the phase angle alpha of the observations is not accurately known but, the dust-to-gas ratio is not overly sensitive to the actual value of this albedo. Infrared observations of the dust head of some comets show that the bulk of cometary dust must be silicates, although a minor component (5-10 percent) of carbon compounds is rather likely, because of poor dielectric properties of the grains. This interpretation is confirmed by the fact that interplanetary dust probably of cometary origin, that was collected in the stratosphere by NASA-U2 Spacecraft, is chondritic in nature. Metal abundances in the head of a sungrazing comet support the chondritic hypothesis.

Delsemme, A. H.↗
NASA NTRS1984

An integrated software system for geometric correction of LANDSAT MSS imagery

A system for geometrically correcting LANDSAT MSS imagery includes all phases of processing, from receiving a raw computer compatible tape (CCT) to the generation of a corrected CCT (or UTM mosaic). The system comprises modules for: (1) control of the processing flow; (2) calculation of satellite ephemeris and attitude parameters, (3) generation of uncorrected files from raw CCT data; (4) creation, management and maintenance of a ground control point library; (5) determination of the image correction equations, using attitude and ephemeris parameters and existing ground control points; (6) generation of corrected LANDSAT file, using the equations determined beforehand; (7) union of LANDSAT scenes to produce and UTM mosaic; and (8) generation of output tape, in super-structure format.

Parada, N. D. J.↗
NASA NTRS1985

Modelisation of the optical scattering behaviour of the vegetation canopies

The three dimensional model of Kimes (1984) which can treat three dimensional variability in heterogeneous scenes, was used to test and expand physical scattering mechanisms involved in reflectance distribution dynamics by analyzing modeling and field data. The major physical phenomena causing the directional scattering behavior of vegetation canopies are presented. These include the strong anisotropic properties of the soil, and the anisotropic scattering properties of the vegetation as described by the phase function of the leaves and the geometric effects caused by vertical layers of leaves. This knowledge serves as a basis for defining optimum directional view angles for remote sensing strategies. An example on using knowledge of the scattering behavior of vegetation to develop techniques for extracting vegetation parameters (spectral albedo) from directional reflectance data is presented.

Kimes, D. S.↗
NASA NTRS1987

Three-step labyrinth seal for high-performance turbomachines

A three-step labyrinth seal with 12, 11, and 10 labyrinth teeth per step, respectively, was tested under static (nonrotating) conditions. The configuration represented the seal for a high-performance turbopump (e.g., the space shuttle main engine fuel pump). The test data included critical mass flux and pressure profiles over a wide range of fluid conditions at concentric, partially eccentric, and fully eccentric seal positions. The seal mass fluxes (leakage rates) were lower over the entire range of fluid conditions tested than those for data collected for similar straight and three-step cylindrical seals, and this conformed somewhat to expectations. However, the pressure profiles for the eccentric positions indicated little, if any, direct stiffness for this configuration in contrast to significant direct stiffness reported for the straight and three-step cylindrical seals over the range of test conditions. Seal dynamics depend on geometric configuration, inlet and exit parameters, fluid phase, and rotation. The method of corresponding states was applied to the mass flux data, which were found to have a pressure dependency for helium.

Hendricks, Robert C.↗
NASA NTRS1991

Interpretation of the surface brightness of Phobos

Analysis of disk resolved images of Phobos obtained by the Phobos 2 spacecraft makes it possible to study the surface scattering law and albedo variations. Low phase angle images reveal variations in local geometric albedo about 10 percent, with a correlation length of about 1 km. The scattering law is reasonably well matched by the recently proposed LPI (Lumme et al., 1990) model, which makes it possible to deduce a small scale (1 mm) surface roughness (0.5), defined here as the rms tangent of the local surface normal relative to the mean surface normal in the Duxbury (1991) model of Phobos. This value is very close to what has been found for Mercury and the moon.

Peltoniemi, Jouni I.↗
NASA NTRS2003

Validation of the Archived CERES Surface and Atmosphere Radiation Budget (SARB) at SGP

The CERES Surface and Atmosphere Radiation Budget (SARB) product (Charlock et al, 2002) includes the vertical profile of broadband SW, broadband LW, and 8-12 micron window (WN) fluxes; upwelling and downwelling at TOA, 70 hPa, 200 hPa, 500 hPa, and the surface; and for all-sky and clear-sky conditions. We test the archived CERES TRMM record of SARB for January-August 1998 and focus on discrepancies with ground-based measurements at SGP. The CERES SARB is generated by a highly modified Fu-Liou radiative transfer code (Fu and Liou, 1993). The most critical inputs for this application are cloud optical properties (fractional area, optical depth, particle size and phase, height of top, and estimate of geometrical thickness Minnis et al., 2002) from the narrowband VIRS imager. Numerous VIRS pixels (approx. 2km resolution at nadir) are matched to each of the large (approx. 20km) CERES broadband footprints (Wielicki et al, 1996). Other inputs include temperature and humidity from ECMWF (Rabier et al, 1998) , NCEP ozone profiles from SBUV and TOVS (Yang et al, 2001), aerosol optical thickness (AOT) from the Model for Atmospheric Transport and Chemistry (MATCH) aerosol assimilation (Collins et al., 2001) or alternately from the VIRS imager (Ignatov and Stowe, 2000). VIRS AOT is available for clear and partly cloudy ocean footprints during daylight; and only when viewing geometry renders a contribution from sunglint as unlikely. For other footprints, AOT is taken from MATCH. AOT is apportioned into fractions of dust (Tegan and Lacis, 1996), sea salt, sulfate, dust, soluble organic, insoluble organic, and soot (Hess et al., 1996) using the 6-hourly MATCH output. Tuned fluxes are retrieved by adjusting inputs to nudge computed TOA fluxes toward CERES observations (Rose et al, 1997). In clear conditions, the fields of humidity, surface skin temperature, surface albedo and AOT are adjusted to produce a closer match of computed and observed fluxes at TOA. When CERES footprints have clouds, the cloud optical thickness, fractional area within the footprint, and temperature of cloud top are adjusted by the tuning algorithm. Both tuned and untuned fluxes are archived, as are the respective adjustments to any parameters at the surface or within the atmosphere.

Charlock, Thomas P.↗
NASA NTRS2008

Phase Matching of Diverse Modes in a WGM Resonator

Phase matching of diverse electromagnetic modes (specifically, coexisting optical and microwave modes) in a whispering-gallery-mode (WGM) resonator has been predicted theoretically and verified experimentally. Such phase matching is necessary for storage of microwave/terahertz and optical electromagnetic energy in the same resonator, as needed for exploitation of nonlinear optical phenomena. WGM resonators are used in research on nonlinear optical phenomena at low optical intensities and as a basis for design and fabrication of novel optical devices. Examples of nonlinear optical phenomena recently demonstrated in WGM resonators include low-threshold Raman lasing, optomechanical oscillations, frequency doubling, and hyperparametric oscillations. The present findings regarding phase matching were made in research on low-threshold, strongly nondegenerate parametric oscillations in lithium niobate WGM resonators. The principle of operation of such an oscillator is rooted in two previously observed phenomena: (1) stimulated Raman scattering by polaritons in lithium niobate and (2) phase matching of nonlinear optical processes via geometrical confinement of light. The oscillator is partly similar to terahertz oscillators based on lithium niobate crystals, the key difference being that a novel geometrical configuration of this oscillator supports oscillation in the regime. The high resonance quality factors (Q values) typical of WGM resonators make it possible to achieve oscillation at a threshold signal level much lower than that in a non-WGM-resonator lithium niobate crystal.

Savchenkov, Anatoliy↗
NASA NTRS2019

Cloud Remote Sensing with EPIC/DSCOVR Observations: A Sensitivity Study with Radiative Transfer Simulations

The Earth Polychromatic Imaging Camera (EPIC) onboard the Deep Space Climate Observatory (DSCOVR) views nearly the whole sunlit face of the Earth with 10 spectral bands ranging from the UV to the near-infrared, including two oxygen absorbing bands centered at 764 nm (A-band) and 687.75 nm (B-band). Clouds are among the primary remote sensing targets using EPIC images because of their important impacts on the Earth’s radiation budget. In order to facilitate the EPIC cloud data product development, we have built a radiative transfer simulator featuring flexible cloud microphysical parameters, gas absorptions, and the instrument line shape functions for each EPIC band. The radiative transfer simulator is used to explore the sensitivity of EPIC observations on liquid-phase cloud microphysical parameters, including optical depth, geometric thickness, and cloud top height. We found that the ratios of the reflectances in the oxygen A and B bands to their respective continuum measurements can be used to increase the confidence level of cloud masking over scenes with sun-glint. In addition, the 388 nm band can be used to differentiate low and high clouds with the uncertainty of roughly 2–3 km. Combining this information with the oxygen absorption bands, the cloud geometric thickness can be obtained with the rough uncertainty of 3–4 km.

atmospheric and ocean optics↗
NASA NTRS2000

Uncertainty Analysis of Composite Structures

A two-phase approach and a computational procedure are presented for predicting the variability in the nonlinear response of composite structures associated with variations in the geometric and material parameters of the structure. In the first phase, hierarchical sensitivity analysis is used to identify the major parameters, which have the most effect on the response quantities of interest. In the second phase, the major parameters are taken to be fuzzy parameters, and a fuzzy set analysis is used to determine the range of variation of the response, associated with preselected variations in the major parameters. The effectiveness of the procedure is demonstrated by means of a numerical example of a cylindrical panel with four T-shaped stiffeners and a circular cutout.

Noor, Ahmed K.↗