Search NASA⌕ Search

SEARCH · Search NASA

Results for “geophysical fluid dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

82 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Dynamic Phase Alignment in Inertial Alfvén Turbulence

In weakly collisional plasma environments with sufficiently low electron beta, Alfvénic turbulence transforms into inertial Alfvénic turbulence at scales below the electron skin depth, k ⊥ d e ≳ 1. We argue that, in inertial Alfvénic turbulence, both energy and generalized kinetic helicity exhibit direct cascades. We demonstrate that the two cascades are compatible due to the existence of a strong scale dependence of the phase alignment angle between velocity and magnetic field fluctuations, with the phase alignment angle scaling as cos α k ∝ $k$$^{–1}_{⊥}$. The kinetic and magnetic energy spectra scale as ∝ $k$$^{–5/3}_{⊥}$ and ∝ $k$$^{–11/3}_{⊥}$, respectively. As a result of the dual direct cascade, the generalized helicity spectrum scales as ∝ $k$$^{–5/3}_{⊥}$, implying progressive balancing of the turbulence as the cascade proceeds to smaller scales in the k ⊥ d e >> 1 range. Turbulent eddies exhibit a phase-space anisotropy k ∥ ∝ $k$$^{5/3}_{⊥}$, consistent with critically balanced inertial Alfvén fluctuations. Furthermore, our results may be applicable to a variety of geophysical, space, and astrophysical environments, including the Earth’s magnetosheath and ionosphere, solar corona, and nonrelativistic pair plasmas, as well as to strongly rotating nonionized fluids.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Stress Field Dynamics and Fault Slip Potential in the Paradox Basin

Abstract The Paradox Basin, straddling Utah, Colorado, Arizona, and New Mexico is characterized by an intricate amalgamation of evaporites and clastic layers and is dominated by prominent salt walls and related subsurface structures. Our research offers a new examination of the stress distribution across the basin, deriving from continuous and discrete stress measurements conducted in boreholes in the region and focal mechanism analysis, emphasizing variations over salt structures. Integrating Coulomb failure criteria with probabilistic methods, we assess potential fault movements resulting from fluid pressure alterations. Our approach provides a comprehensive understanding of the Paradox Basin's state of stress, showing a continuous change of the maximum horizontal stress orientation from N‐S at the Wasatch Fault Zone to WNW‐ESE in the northern part of the Paradox Basin and to WSW‐ENE in the southern part of the basin. Further East, into the Colorado Plateau and the Uncompahgre Uplift, the S H max orientation becomes E‐W. Decoding stress orientation dynamics has enabled critical insights into fault slip potential, especially in the basin's northern region. The salt wall faults are less likely to slip, and the Paradox Formation's evaporite and clastic rock sequence can serve as a potential low seismic risk target for carbon storage and hydrocarbon extraction.

Geochemistry & Geophysics↗
DOE OSTI2021

Dynamic Phase Alignment in Inertial Alfven Turbulence

In weakly-collisional plasma environments with sufficiently low electron beta, Alfvenic turbulence transforms into inertial Alfvenic turbulence at scales below the electron skin-depth. We argue that, in inertial Alfvenic turbulence, both energy and generalized kinetic helicity exhibit direct cascades. We demonstrate that the two cascades are compatible due to the existence of a strong scale-dependence of the phase alignment angle between velocity and magnetic field fluctuations, with the phase alignment angle scaling as proportional to the perpendicular wavenumber to the power of -1. The kinetic and magnetic energy spectra scale as the perpendicular wavenumber to the power of -5/3 and -11/3, respectively. As a result of the dual direct cascade, the generalized-helicity spectrum scales as the perpendicular wavenumber to the power of -5/3, implying progressive balancing of the turbulence as the cascade proceeds to smaller scales in the sub-electron-skin-depth range. Turbulent eddies exhibit a phase-space anisotropy, with the parallel wavenumber scaling as the perpendicular wavenumber to the power of 5/3, consistent with critically-balanced inertial Alfven fluctuations. Our results may be applicable to a variety of geophysical, space, and astrophysical environments, including the Earth's magnetosheath and ionosphere, solar corona, non-relativistic pair plasmas, as well as to strongly rotating non-ionized fluids.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Lie–Poisson Neural Networks (LPNets): Data-based computing of Hamiltonian systems with symmetries

An accurate data-based prediction of the long-term evolution of Hamiltonian systems requires a network that preserves the appropriate structure under each time step. Every Hamiltonian system contains two essential ingredients: the Poisson bracket and the Hamiltonian. Hamiltonian systems with symmetries, whose paradigm examples are the Lie–Poisson systems, have been shown to describe a broad category of physical phenomena, from satellite motion to underwater vehicles, fluids, geophysical applications, complex fluids, and plasma physics. The Poisson bracket in these systems comes from the symmetries, while the Hamiltonian comes from the underlying physics. We view the symmetry of the system as primary, hence the Lie–Poisson bracket is known exactly, whereas the Hamiltonian is regarded as coming from physics and is considered not known, or known approximately. Using this approach, we develop a network based on transformations that exactly preserve the Poisson bracket and the special functions of the Lie–Poisson systems (Casimirs) to machine precision. We present two flavors of such systems: one, where the parameters of transformations are computed from data using a dense neural network (LPNets), and another, where the composition of transformations is used as building blocks (G-LPNets). We also show how to adapt these methods to a larger class of Poisson brackets. We apply the resulting methods to several examples, such as rigid body (satellite) motion, underwater vehicles, a particle in a magnetic field, and others. The methods developed in this paper are important for the construction of accurate data-based methods for simulating the long-term dynamics of physical systems.

Data-based modeling↗
DOE OSTI2023

Multiphysics modelling in PyLith: poroelasticity

SUMMARY PyLith, a community, open-source code for modelling quasi-static and dynamic crustal deformation with an emphasis on earthquake faulting, has recently been updated with a flexible multiphysics implementation. We demonstrate the versatility of the multiphysics implementation by extending the code to model fully coupled continuum poromechanics. We verify the newly incorporated physics using standard benchmarks for a porous medium saturated with a slightly compressible fluid. The benchmarks include the 1-D consolidation problem as outlined by Terzaghi, Mandel’s problem for the 2-D case, and Cryer’s problem for the 3-D case. All three benchmarks have been added to the PyLith continuous integration test suite. We compare the closed form analytical solution for each benchmark against solutions generated by our updated code, and lastly, demonstrate that the poroelastic material formulation may be used alongside the existing fault implementation in PyLith.

Geochemistry & Geophysics↗
DOE OSTI2023

Utah FORGE 5-2557: Fluid and Temperature in Fracture Mechanics and Coupled THMC Processes - Workshop Presentation

This is a presentation on the Role of Fluid and Temperature in Fracture Mechanics and Coupled Thermo-Hydro-Mechanical-Chemical (THMC) Processes for Enhanced Geothermal Systems project by Purdue University, presented by Distinguished Professor of Physics & Astronomy, Laura J. Pyrak-Nolte. The project's objective was to develop and validate a macroscopic model that accounts for local deformation/frictional behavior, seismic/aseismic behavior, chemical reactions, and determine the adequacy of classic Coulomb failure vs. rate-and-state friction. This presentation was featured in the Utah FORGE R&D Annual Workshop on September 8, 2023. The workshop provided a valuable opportunity to explore the progress made in each of the 17 Research and Development projects funded under Solicitation 2020-1 which aim to enhance our understanding of the crucial factors influencing the development of Enhanced Geothermal Systems (EGS) reservoirs and resources.

15 GEOTHERMAL ENERGY↗
DOE OSTI2021

Precambrian Crystalline Basement Properties From Pressure History Matching and Implications for Induced Seismicity in the US Midcontinent

Injection-induced seismicity across the US midcontinent has almost exclusively occurred in the crystalline basement that underlies the Arbuckle Group aquifer and its equivalents, the primary wastewater disposal zone in this region. However, the properties of the basement are not well known. Newly compiled data, from Class I wells in Kansas, provide a unique record of pressures in the Arbuckle and an opportunity to constrain the reservoir-scale properties of the basement such as permeability, diffusivity, and specific storage. Constraints on these parameters are critical for modeling fluid flow and pressures across the entire Arbuckle-basement system, and are necessary for accurate evaluation and prediction of injection-induced earthquakes. Here, we present a detailed, three-dimensional geological and pressure history-matched numerical model for the Arbuckle and basement, based on data from >400 wells covering a large region in south-central Kansas, where injection-induced seismicity has been concentrated since 2014. Simulations of dynamic data from 319 wells indicate that Arbuckle pressures have increased by 1.1 MPa in high injection rate areas and an overpressure of <0.1 MPa may be the cause of seismicity in the basement. Pressure-history matching also yields the likely range in porosity (0.3%–7%), permeability (0.1–0.7 mD), and diffusivity (0.004–0.07 m2 /s) for the basement. The resulting estimates suggest reservoir-scale properties of the basement are enhanced by faults and fractures. Importantly, the diffusivities determined in this study are lower than estimates derived from Kansas earthquake triggering fronts, and suggest that such seismicity-based techniques may have limitations, particularly where spacetime patterns between injection and seismicity are complex.

58 GEOSCIENCES↗
DOE OSTI2021

Techniques for studying materials under extreme states of high energy density compression

The properties of materials under extreme conditions of pressure and density are of key interest to a number of fields, including planetary geophysics, materials science, and inertial confinement fusion. In geophysics, the equations of state of planetary materials, such as hydrogen and iron, under ultrahigh pressure and density provide a better understanding of their formation and interior structure [Celliers et al., “Insulator-metal transition in dense fluid deuterium,” Science 361, 677–682 (2018) and Smith et al., “Equation of state of iron under core conditions of large rocky exoplanets,” Nat. Astron. 2, 591–682 (2018)]. The processes of interest in these fields occur under conditions of high pressure (100 GPa–100 TPa), high temperature (>3000 K), and sometimes at high strain rates (>103 s−1) depending on the process. With the advent of high energy density (HED) facilities, such as the National Ignition Facility (NIF), Linear Coherent Light Source, Omega Laser Facility, and Z, these conditions are reachable and numerous experimental platforms have been developed. To measure compression under ultrahigh pressure, stepped targets are ramp-compressed and the sound velocity, measured by the velocity interferometer system for any reflector diagnostic technique, from which the stress-density of relevant materials is deduced at pulsed power [M. D. Knudson and M. P. Desjarlais, “High-precision shock wave measurements of deuterium: Evaluation of exchange-correlation functionals at the molecular-to-atomic transition,” Phys. Rev. Lett. 118, 035501 (2017)] and laser [Smith et al., “Equation of state of iron under core conditions of large rocky exoplanets,” Nat. Astron. 2, 591–682 (2018)] facilities. To measure strength under high pressure and strain rates, experimenters measure the growth of Rayleigh–Taylor instabilities using face-on radiography [Park et al., “Grain-size-independent plastic flow at ultrahigh pressures and strain rates,” Phys. Rev. Lett. 114, 065502 (2015)]. The crystal structure of materials under high compression is measured by dynamic x-ray diffraction [Rygg et al., “X-ray diffraction at the national ignition facility,” Rev. Sci. Instrum. 91, 043902 (2020) and McBride et al., “Phase transition lowering in dynamically compressed silicon,” Nat. Phys. 15, 89–94 (2019)]. Medium range material temperatures (a few thousand degrees) can be measured by extended x-ray absorption fine structure techniques, Yaakobi et al., “Extended x-ray absorption fine structure measurements of laser-shocked V and Ti and crystal phase transformation in Ti,” Phys. Rev. Lett. 92, 095504 (2004) and Ping et al., “Solid iron compressed up to 560 GPa,” Phys. Rev. Lett. 111, 065501 (2013), whereas more extreme temperatures are measured using x-ray Thomson scattering or pyrometry. This manuscript will review the scientific motivations, experimental techniques, and the regimes that can be probed for the study of materials under extreme HED conditions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Sedimentation and shear-induced dynamics of spheroids in fluids with spatial viscosity variations

A generalized reciprocal theorem is used to relate the force and torque induced on a particle in an inertia-less fluid with small variation in viscosity to integrals involving Stokes flow fields and the spatial dependence of viscosity. These resistivity expressions are analytically evaluated using spheroidal harmonics and then used to obtain the mobility of the spheroid during sedimentation, and in linear flows, of a fluid with linear viscosity stratification. The coupling between the rotational and translational motion induced by stratification rotates the spheroid’s centerline, creating a variety of rotational and translational dynamics dependent upon the particle’s aspect ratio, κ, and the component of the stratification unit vector in the gravity direction, d g . Spheroids with 0.55 ⪅ κ ⪅ 2.0 exhibit the largest variety of settling behaviors. Interestingly, this range covers most microplastics and typical microorganisms. One of the modes include a stable orientation dependent only on κ and d g , but independent of initial orientation, thus allowing for the potential control of settling angles and sedimentation rates. In a simple shear flow, cross-streamline migration occurs due to the stratification-induced force generated on the particle. Similarly, a particle no longer stays at the stagnation point of a uniaxial extensional flow. While fully analytical results are obtained for spheroids, numerical simulations provide a source of validation. These simulations also provide additional insights into the stratification-induced force- and torque-producing mechanisms through the stratification-induced stress, which is not accessed in the reciprocal theorem-based analytical calculations.

Geophysical and Geological Flows: Stratified flows↗
DOE OSTI2024

Investigating Soil Organic Matter Complexation using Spectral Induced Polarization

Spectral induced polarization (SIP) laboratory experiments were conducted to determine the sensitivity of this method to the formation of soil organic matter (SOM) complexes, with a long-term goal of field-scale monitoring. There are few SIP experiments that have explored this topic, yet understanding the dynamic behavior and interactions of SOM at the field scale could provide insight into soil fertility and health which influences crop yields, microorganisms that degrade organic pollutants, and carbon stabilization. We present the results of three experiments where the iron oxide, ferrihydrite (Fhy), was used to coat different media, and then the OM compound pentaglycine (PG) was pulse injected to form SOM complexes. SIP data was collected during these injections to capture any surface complexation changes. These experiments were performed in 1) a fluidic cell containing a micromodel, 2) a column containing Fhy coated ceramic beads and 3) a column containing Fhy coated Accusand®. Our results show a higher frequency response (defined here as > 1 Hz) in all three experiments, with the largest amplitude response after the first PG injection (Figure S.1). The repeatability of this response is encouraging and supporting data collected on the Accusand® experiment provides preliminary insight into the mechanisms controlling the SIP signatures. Sampling of fluid conductivity $σ_w$ and pH may indicate deprotonation of SOM occurring or rapid adsorption and release of protons from the Fhy sites. However additional experiments are needed to identify and confirm the primary and secondary reactions impacting the SIP response. We are looking towards other opportunities to continue this work, particularly to repeat experiments while collecting supporting datasets.

58 GEOSCIENCES↗