Search NASA⌕ Search

SEARCH · Search NASA

Results for “hard disks”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Properties of the Chandra Sources in M81

The Chandra X-ray Observatory obtained a 50-ks observation of the central region of M81 using the ACIS-S in imaging mode. The global properties of the 97 x-ray sources detected in the inner 8'.3 x 8'.3 field of M81 are examined. Roughly half the sources are concentrated within the central bulge. The remainder are distributed throughout the disk with the brightest disk sources lying preferentially along spiral arms. The average hardness ratios of both bulge and disk sources are consistent with power law spectra of index F approximates 1.6 indicative of a population of x-ray binaries. A group of much softer sources are also present. The background source- subtracted log(N)-log(S) distribution of the disk follows a power law of index about -0.5 with no change in slope over three decades in flux. The log(N)-log(S) distribution of the bulge follows a similar shape but with a steeper slope above about 4 x 10(exp 37) ergs/s. There is unresolved x-ray flux from the bulge with a radial profile similar to that of the bulge sources. This unresolved flux is softer than the average of the bulge sources and extrapolating the bulge log(N)-log(S) distribution towards weaker sources can only account for 20% of the unresolved flux. No strong time variability was observed for any source with the exception of one bright, soft source.

Tennant, Allyn F.↗

Properties of the Chandra Sources in M81

The Chandra X-Ray Observatory obtained a 50 ks observation of the central region of M81 using the ACIS-S in imaging mode. The global properties of the 97 X-ray sources detected in the inner 8.3' x 8.3' field of M81 are examined. Roughly half the sources are concentrated within the central bulge. The remainder are distributed throughout the disk, with the brightest disk sources lying preferentially along spiral arms. The average hardness ratios of both bulge and disk sources are consistent with power-law spectra of index Gamma equals approximately 1.6, indicative of a population of X-ray binaries. A group of much softer sources is also present. The background-source-subtracted log N-log S distribution of the disk follows a power law of index approximately -0.5 with no change in slope over three decades in flux. The log N-log S distribution of the bulge follows a similar shape but with a steeper slope above approximately 4 x 10(exp 37) ergs/s. There is unresolved X-ray flux from the bulge with a radial profile similar to that of the bulge sources. This unresolved flux is softer than the average of the bulge sources, and extrapolating the bulge log N-log S distribution toward weaker sources can account for only 20% of the unresolved flux. No strong time variability was observed for any source with the exception of one bright, soft source.

Tennant, Allyn F.↗

The dynamics of particle disks. II - Effects of spin degrees of freedom

The present treatment of the thermal equilibria of differentially-rotating, axisymmetric disks consisting of identical, spin-possessing as well as translational DOF-possessing hard sphere particles characterizes these disks' dynamics by means of two novel parameters: (1) the tangential restitution coefficient, and (2) the dimensionless moment of inertia. It is established that rings composed of spinning particles can generally be thermally balanced within more restricted ranges of the optical depth, as well as at higher values of the normal restitution coefficient, than spinless rings. Mean spin is indefinite in the present framework of neglected finite particle-size effects.

Araki, Suguru↗

Spatial distribution of the X-ray-emitting plasma of U Geminorum in quiescence and outburst

We present our analysis of the Suzaku data of U Geminorum (U Gem) from 2012 both in quiescence and outburst. Unlike SS Cygni (SS Cyg), the hard X-ray flux of U Gem is known to increase at times of optical outburst. A sophisticated spectral model and reliable distance estimate now reveal that this can be attributed to the fact that the mass accretion rate onto the white dwarf (WD) does not exceed the critical rate that causes the optically thin to thick transition of the boundary layer. From comparison of the X-ray and optical light curves, the X-ray outburst peak seems to be retarded by 2.1 ± 0.5 d, although there remains uncertainty in the X-ray peak identification, due to short data coverage. The larger delay than SS Cyg (0.9–1.4 d) also supports the lower accretion rate in U Gem. A fluorescent iron 6.4 keV emission line bears significant information about the geometry of the X-ray-emitting hot plasma and the accretion disk (AD) that reflects the hard X-ray emission. Our reflection simulation has shown that the optically thick AD is truncated at a distance of 1.20–1.25 times the white dwarf radius (RWD) in quiescence, and the accreting matter in the disk turns into the optically thin hard-X-ray-emitting plasma at this radius. In outburst, on the other hand, our spectral analysis favors the picture that the optically thick disk reaches the WD surface, although disk truncation can take place in the region of <1.012 RWD. From the profile of the 6.4 keV line, we have also discovered that the accreting matter is heated up close to the maximum temperature immediately after the matter enters the boundary layer at the disk truncation radius. This is consistent with the fact that the hard X-ray spectra of dwarf novae, in general, can be well represented with the cooling flow model.

Mai Takeo↗

The role of near-surface plastic deformation in the wear of lamellar solids

It is shown in this paper that the role of surface and near-surface plastic deformation is especially significant in both sliding and abrasive wear of lamellar composites. Lamellar structures were produced artificially from alternate layers of pure copper and pure tin or lead foils. The resulting composites were tested in three different wear tests: single-pass abrasion by a sharp, hard abrader; multiple-pass rubbing by a hard, rounded abrader; and pin-on-disk sliding. In each case the counterface was a hard alloy steel. Tests were run with the composite lamellae in two orientations: perpendicular and parallel to the sliding direction. It was found that the composites had much less wear resistance and greater abradability when oriented perpendicular to the rub direction. The mechanisms for wear particle removal and the role of plastic deformation in the process were studied by plasticity analysis and by microscopic (SEM and optical) observation.

Kennedy, F. E.↗

The Microquasar Cyg X-1: A Short Review

We review the spectral properties of the black hole candidate Cygnus X-I. Specifically, we discuss two recent sets of multi-satellite observations. One comprises a 0.5-500 keY spectrum, obtained with eve!)' flying X-ray satellite at that time, that is among the hardest Cyg X-I spectra observed to date. The second set is comprised of 0.5-40 keV Chandra-HETG plus RXTE-PCA spectra from a radio-quiet, spectrally soft state. We first discuss the "messy astrophysics" often neglected in the study of Cyg X-I, i.e., ionized absorption from the wind of the secondary and the foreground dust scattering halo. We then discuss components common to both state extremes: a low temperature accretion disk, and a relativistically broadened Fe line and reflection. Hard state spectral models indicate that the disk inner edge does not extend beyond > or approx.= 40 GM/sq c , and may even approach as close as approx. = 6GM/sq c. The soft state exhibits a much more prominent disk component; however, its very low normalization plausibly indicates a spinning black hole in the Cyg X-I system. Key words. accretion, accretion disks - black hole physics - X-rays:binaries

Nowak, M. A.↗

Connections Between Jet Formation and Multiwavelength Spectral Evolution in Black Hole Transients

Multiwavelength observations are the key to understand conditions of jet formation in Galactic black hole transient (GBHT) systems. By studying radio and optical-infrared evolution of such systems during outburst decays, the compact jet formation can be traced. Comparing this with X-ray spectral and timing evolution we can obtain physical and geometrical conditions for jet formation, and study the contribution of jets to X-ray emission. In this work, first X-ray evolution - jet relation for XTE J1752-223 will be discussed. This source had very good coverage in X-rays, optical, infrared and radio. A long exposure with INTEGRAL also allowed us to study gamma-ray behavior after the jet turns on. We will also show results from the analysis of data from GX 339-4 in the hard state with SUZAKU at low flux levels. The fits to iron line fluorescence emission show that the inner disk radius increases by a factor of greater than 27 with respect to radii in bright states. This result, along with other disk radius measurements in the hard state will be discussed within the context of conditions for launching and sustaining jets.

Kakemci, Emrah↗

Lightman-Eardley instabilities and accretion disk thickening

After reviewing the role of Compton scattering in accretion disks around black holes, it is discussed whether Lightman-Eardley (LE) secular instabilities can trigger and maintain Pringle-Rees (PR) thermal instabilities. The radiative-transfer-equation and equation-of-state criteria for LE stability in alpha-viscosity-law disk models and dynamic viscosity criteria for more general situations is derived. On the basis of these considerations the LE instability is insufficient for inducing PR instabilities and hot thick inner regions important in accretion-disk models of compact hard X-ray sources. The density thinning due to radial velocity gradients in the accretion flow is suggested as a more likely and satisfactory mechanism.

Stoeger, W. R.↗

Persistent emission and bursts from Aquila X-1 observed by Einstein

A two-component model is applied to an X-ray outburst from Aql X-1 recorded by the Einstein Observatory in March-April 1979. The model treats such outbursts as a combination of a soft, multicolor component (accretion disk) and a hard-blackbody component (boundary layer emission). Evaluation of the light curves indicates that the bursts were caused by an increase in the accretion rate. The calculations also suggest that the system observed is inclined at a 33 deg angle.

Czerny, M.↗

Does the Inner Disk Boundary of a Black Hole X-Ray Binary move During an Outburst?

Comptonization in the corona of an X-ray binary may reduce significantly the flux in the observed soft component of its X-ray spectrum. There fore the apparent inner disk radius inferred from the observed soft component may change in accordance to the fraction of the disk emission scattered into the hard component. We have developed a simple numerical model for carrying out the radiative transfer correction, in order to determine the original disk emission before the Comptonization in the hot corona. Applying this model to the extensive monitoring data of several black hole X-ray binaries with RXTE, we have found that most of the previous 1 y reported inner disk radius variations may be explained as due to this radiative transfer effect in the corona. We thus conclude that there is currently no evidence for significant inner disk boundary movement during the outbursts of these black hole X-ray binaries we have studied with the RXTE data.: GROJ1655-40, XTEJ1550-564, XTEJ1748-288 and XTEJ2012+381.

Zhang, S. N.↗

Studying the Warm Layer and the Hardening Factor in Cygnus X-1

As the first dynamically determined black hole X-ray binary system, Cygnus X-1 has been studied extensively. However, its broadband spectrum observed with BeppoSax is still not well understood. Besides the soft excess described by the multi-color disk model (MCD), the power-law hard component and a broad excess feature above 10 keV (a disk reflection component), there is also an additional soft component around 1 keV, whose origin is not known currently. Here we propose that the additional soft component is due to the thermal Comptonization between the soft disk photons and a warm plasma cloud just above the disk, i.e., a warm layer. We use the Monte-Carlo technique to simulate this Compton scattering process and build a table model based on our simulation results. With this table model, we study the disk structure and estimate the hardening factor to the MCD component in Cygnus X-1.

Yao, Yangsen↗

Broadband X-Ray Spectra of GX 339-4 and the Geometry of Accreting Black Holes in the Hard State

A major question in the study of black hole binaries involves our understanding of the accretion geometry when the sources are in the "hard" state, with an X-ray energy spectrum dominated by a hard power-law component and radio emission coming from a steady "compact" jet. Although the common hard state picture is that the accretion disk is truncated, perhaps at hundreds of gravitational radii (Rg) from the black hole, recent results for the recurrent transient GX 339-4 by Miller and coworkers show evidence for disk material very close to the black hole's innermost stable circular orbit. That work studied GX 339-4 at a luminosity of approximately 5% of the Eddington limit (L(sub Edd) and used parameters from a relativistic reflection model and the presence of a thermal component as diagnostics. Here we use similar diagnostics but extend the study to lower luminosities (2.3% and 0.8% L(sub Edd)) using Swift and RXTE observations of GX 339-4. We detect a thermal component with an inner disk temperature of approximately 0.2 keV at 2.3% L (sub Edd). At both luminosities, we detect broad features due to iron K-alpha that are likely related to reflection of hard X-rays off disk material. If these features are broadened by relativistic effects, they indicate that the material resides within 10 Rg, and the measurements are consistent with the disk's inner radius remaining at approximately 4 Rg down to 0.8% L(sub Edd). However, we also discuss an alternative model for the broadening, and we note that the evolution of the thermal component is not entirely consistent with the constant inner radius interpretation. Finally, we discuss the results in terms of recent theoretical work by Liu and co-workers on the possibility that material may condense out of an Advection-Dominated Accretion Flow to maintain an inner optically thick disk.

Tomsick, John A.↗

The Soft State of Cygnus X-1 Observed with NuSTAR: A Variable Corona and a Stable Inner Disk

We present a multi-epoch hard X-ray analysis of Cygnus X-1 in its soft state based on four observations with the Nuclear Spectroscopic Telescope Array (NuSTAR). Despite the basic similarity of the observed spectra, there is clear spectral variability between epochs. To investigate this variability, we construct a model incorporating both the standard disk-corona continuum and relativistic reflection from the accretion disk, based on prior work on Cygnus X-1, and apply this model to each epoch independently. We find excellent consistency for the black hole spin and the iron abundance of the accretion disk, which are expected to remain constant on observational timescales. In particular, we confirm that Cygnus X-1 hosts a rapidly rotating black hole, 0.93 < approx. a* < approx. 0.96, in broad agreement with the majority of prior studies of the relativistic disk reflection and constraints on the spin obtained through studies of the thermal accretion disk continuum. Our work also confirms the apparent misalignment between the inner disk and the orbital plane of the binary system reported previously, finding the magnitude of this warp to be approx.10deg-15deg. This level of misalignment does not significantly change (and may even improve) the agreement between our reflection results and the thermal continuum results regarding the black hole spin. The spectral variability observed by NuSTAR is dominated by the primary continuum, implying variability in the temperature of the scattering electron plasma. Finally, we consistently observe absorption from ionized iron at approx. 6.7 keV, which varies in strength as a function of orbital phase in a manner consistent with the absorbing material being an ionized phase of the focused stellar wind from the supergiant companion star.

black hole physics↗

Friction, wear, transfer and wear surface morphology of ultra-high-molecular-weight polyethylene

Tribological studies at 25 C in a 50-percent-relative-humidity air atmosphere were conducted using hemispherically tipped 440 C HT (high temperature) stainless steel pins sliding against ultra-high-molecular-weight polyethylene (UHMWPE) disks. The results indicate that sliding speed, sliding distance, contact stress and specimen geometry can markedly affect friction, UHMWPE wear, UHMWPE transfer and the type of wear mechanisms that occur. Adhesion appears to be the predominant wear mechanism; but after long sliding distances at slow speeds, heavy ridges of transfer result which can induce fatigue-like wear on the UHMWPE disk wear track. In one instance, abrasive wear to the metallic pin was observed. This was caused by a hard particle embedded in the UHMWPE disk wear track.

Fusaro, R. L.↗

Friction, wear, transfer, and wear surface morphology of ultrahigh-molecular-weight polyethylene

Tribological studies at 25 C in a 50-percent-relative-humidity air atmosphere were conducted using hemispherically tipped 440 C HT (high temperature) stainless steel pins sliding against ultra-high-molecular-weight polyethylene (UHMWPE) disks. The results indicate that sliding speed, sliding distance, contact stress and specimen geometry can markedly affect friction, UHMWPE wear, UHMWPE transfer and the type of wear mechanisms that occur. Adhesion appears to be the predominant wear mechanism; but after long sliding distances at slow speeds, heavy ridges of transfer result which can induce fatigue-like wear on the UHMWPE disk wear track. In one instance, abrasive wear to the metallic pin was observed. This was caused by a hard particle embedded in the UHMWPE disk wear track.

Fusaro, R. L.↗

Spectral Analysis of the Accretion Flow in NGC 1052 with Suzaku

We present an analysis of the 101 ks, 2007 Suzaku spectrum of the LINER galaxy NGC 1052. The 0:3..10 keV continuum is well-modeled by a power-law continuum modified by Galactic and intrinsic absorption, and exhibits a soft, thermal emission component below 1 keV. Both a narrow core and a broader component of Fe-Ka emission are robustly detected at 6:4 keV. While the narrow line is consistent with an origin in material distant from the black hole, the broad line is best fit empirically by a model that describes fluorescent emission from the inner accretion disk around a rapidly rotating black hole. We find no direct evidence for Comptonized reflection of the hard X-ray source by the disk above 10 keV, however, which casts doubt on the hypothesis that the broad iron line is produced in a standard accretion disk. We explore other possible scenarios for producing this spectral feature and conclude that the high equivalent width and full width half maximum velocity of the broad iron line (v greater than or equals 0:37c) necessitate an origin within d approx. 8r(sub g) of the hard X-ray source. Based on the confirmed presence of a strong radio jet in this source, the broad iron line may be produced in dense plasma at the base of the jet, implying that emission mechanisms in the central-most portions of active galactic nuclei are more complex than previously thought.

Brenneman, L. W.↗

Diffuse X-rays from the galactic disk

An anisotropic feature of the diffuse hard X-ray background that tracks the concentration of interstellar hydrogen in the plane of the galaxy is reported. This feature supports a model of galactic X-ray emission by subrelativistic cosmic rays via a bremsstrahlung process. The measurement was carried out on August 9, 1971, using two multianode multilayer gas proportional counters onboard Aerobee 170 flight 13.08. A schematic diagram of the detectors is shown. This type of construction and the appropriate utilization of the signals from the many anodes result in a low detector background, a perequisite before undertaking a measurement of possible small variations in the brightness of the X-ray sky.

Serlemitsos, P. J.↗

An X-ray image of the Seyfert galaxy NGC 1068

An image of NGC 1068 with 4-5 arcsec obtained with the High Resolution Imager on the Rosat X-ray Observatory in the energy band 0.1-2.4 keV is presented and discussed. The map reveals an unresolved nuclear source, extended (about 1.5 kpc) emission around the nucleus, and extended (about 13 kpc) emission from the starburst disk. The extended circumnuclear emission aligns toward the NE, the same direction as found for the resolved emission of the active nucleus in several other wavebands. Thermal emission from a hot wind is argued to be the source of the steep-spectrum, nuclear, and circumnuclear emission. The disk of NGC 1068 has ratios of soft X-ray to B band and soft X-ray to 60-micron luminosities which are similar to those found for other starburst systems. The X-ray spectrum of the starburst disk is harder than that of the nuclear emission. By adopting a plausible spectrum and extrapolating the present measured flux, it is concluded that the starburst disk contributes most of the hard component seen in the 2-10 keV band.

Wilson, A. S.↗