Search NASA⌕ Search

SEARCH · Search NASA

Results for “heterojunctions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Quasi‐Homojunction Organic Nonfullerene Photovoltaics Featuring Fundamentals Distinct from Bulk Heterojunctions

Abstract In contrast to classical bulk heterojunction (BHJ) in organic solar cells (OSCs), the quasi‐homojunction (QHJ) with extremely low donor content (≤10 wt.%) is unusual and generally yields much lower device efficiency. Here, representative polymer donors and nonfullerene acceptors are selected to fabricate QHJ OSCs, and a complete picture for the operation mechanisms of high‐efficiency QHJ devices is illustrated. PTB7‐Th:Y6 QHJ devices at donor:acceptor (D:A) ratios of 1:8 or 1:20 can achieve 95% or 64% of the efficiency obtained from its BHJ counterpart at the optimal D:A ratio of 1:1.2, respectively, whereas QHJ devices with other donors or acceptors suffer from rapid roll‐off of efficiency when the donors are diluted. Through device physics and photophysics analyses, it is observed that a large portion of free charges can be intrinsically generated in the neat Y6 domains rather than at the D/A interface. Y6 also serves as an ambipolar transport channel, so that hole transport as also mainly through Y6 phase. The key role of PTB7‐Th is primarily to reduce charge recombination, likely assisted by enhancing quadrupolar fields within Y6 itself, rather than the previously thought principal roles of light absorption, exciton splitting, and hole transport.

Chemistry↗
DOE OSTI2024

Endothermic Charge Separation Occurs Spontaneously in Non–Fullerene Acceptor/Polymer Bulk Heterojunction

Organic photovoltaics (OPVs) based on non-fullerene acceptors (NFAs) have achieved a power conversion efficiency close to 20%. These NFA OPVs can generate free carriers efficiently despite a very small energy level offset at the donor/acceptor interface. Why these NFAs can enable efficient charge separation (CS) with low energy losses remains an open question. Here, the CS process in the PM6:Y6 bulk heterojunction is probed by time-resolved two-photon photoemission spectroscopy. It is found that the CS, the conversion from bound charge transfer (CT) excitons to free carriers, is an endothermic process with an enthalpy barrier of 0.15 eV. The CS can occur spontaneously despite being an endothermic process, which implies that it is driven by entropy. It is further argued that the morphology of the PM6:Y6 film and the anisotropic electron delocalization restrict the electron and hole wavefunctions within the CT exciton such that they can primarily contact each other through point-like junctions. Furthermore, this configuration can maximize the entropic driving force.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Achieving Balanced Crystallization Kinetics of Donor and Acceptor by Sequential-Blade Coated Double Bulk Heterojunction Organic Solar Cells

Sequential deposition has great potential to achieve high performance in organic solar cells due to the resulting well-controlled vertical phase separation. In this work, double bulk heterojunction organic solar cells are fabricated by sequential-blade cast in ambient conditions. Probed by the in situ grazing incidence X-ray diffraction and in situ UV–vis absorption measurements, the seq-blade system exhibits a different tendency from each of the binary films during the film formation process. Due to the extensive aggregation of FOIC, the binary PBDB-T:FOIC film displays a strong and large phase separation, resulting in low current density (J sc) and unsatisfactory power conversion efficiency. In the seq-blade cast system, the bottom layer PBDB-T:IT-M produces many crystal nuclei for the top layer PBDB-T:FOIC, so the PBDB-T molecules are able to crystallize easily and quickly. Balanced crystallization kinetics between polymer and small molecule and an ideal percolation network in the film are observed. In addition, the balanced crystallization kinetics are favorable toward realizing lower recombination loss through charge transport processes.

14 SOLAR ENERGY↗
DOE OSTI2024

Bulk‐Heterojunction Electrocatalysts in Confined Geometry Boosting Stable, Acid/Alkaline‐Universal Water Electrolysis

Abstract Alkaline water splitting electrocatalysts have been studied for decades; however, many difficulties remain for commercialization, such as sluggish hydrogen evolution reaction (HER) kinetics and poor catalytic stability. Herein, by mimicking the bulk‐heterojunction morphology of conventional organic solar cells, a uniform 10 nm scale nanocube is reported that consists of subnanometer‐scale heterointerfaces between transition metal phosphides and oxides, which serves as an alkaline water splitting electrocatalyst; showing great performance and stability toward HER and oxygen evolution reaction (OER). Interestingly, the nanocube electrocatalyst reveals acid/alkaline independency from the synergistic effect of electrochemical HER (cobalt phosphide) and thermochemical water dissociation (cobalt oxide). From the spray coating process, nanocube electrocatalyst spreads uniformly on large scale (≈6.6 × 5.6 cm 2 ) and is applied to alkaline water electrolyzers, stably delivering 600 mA cm −2 current for >100 h. The photovoltaic‐electrochemical (PV‐EC) system, including silicon PV cells, achieves 11.5% solar‐to‐hydrogen (STH) efficiency stably for >100 h.

Chemistry↗
DOE OSTI2021

Modeling of transport in carrier-selective contacts in silicon heterojunction solar cells

High-performance silicon heterojunction (SHJ) solar cells use carrier-selective contact structures based on hydrogentated amorphous Si (a-Si:H) to maximize collection of photogenerated carriers. The high open circuit voltages observed experimentally in SHJ cells require that the carrier-selective contacts provide selectivity and passivation. However, a microscopic understanding of the dynamics of carrier transport through the a-Si layer is currently lacking. In this paper, we explicitly simulate the transport of holes across the a-Si:H(i) layer using a novel kinetic Monte Carlo approach. The hole-selective contact structure investigated in this paper uses p-type doped a-Si:H(p) and intrinsic a-Si:H(i) on an n-type crystalline silicon wafer, where the selectivity is provided by the a-Si:H(p) and the passivation is provided by the a-Si:H(i). However, in addition to the passivation provided by the a-Si:H(i), this layer also creates a potential barrier to the collection of photogenerated holes. There have been experimental studies in the literature that have suggested that multi-phonon processes are the main transport mechanism that assists in the transport of holes across the intrinsic a-Si:H barrier. Simulations presented here show that multi-phonon injection of holes into the a-Si:H(i) layer is the rate limiting step for transport across the a-Si:H(i) layer. Our results indicate that multi-phonon transport is strongly dependent on the electric field at the a-Si:H(i)/c-Si heterointerface as well. Transport simulations presented in this paper are consistent with experimental findings that multi-phonon processes limit transport across the a-Si:H(i) layer and are responsible for photocurrent suppression at the a-Si:H(i)/c-Si heterointerface when these processes are slower than the associated incident hole flux due to photo-excitation.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2022

Techno-economic analysis of the use of atomic layer deposited transition metal oxides in silicon heterojunction solar cells

The industry for producing silicon solar cells and modules has grown remarkably over the past decades, with more than a 100-fold reduction in price over the past 45?years. The main solar cell fabrication technology has shifted over that time and is currently dominated by the passivated emitter and rear cell (PERC). Other technologies are expected to increase in market share, including tunnel-oxide passivated contact (TOPCon) and heterojunction technology (HJT). In this paper, we examine the cost potential for using atomic layer deposition (ALD) to form transition metal oxide (TMO) layers (MoO x , TiO x and aluminium-doped zinc oxide [AZO]) to use as lower cost alternatives of the p-doped, n-doped and indium tin oxide (ITO) layers, respectively, the layers normally used in HJT solar cells. Using a bottom-up cost and uncertainty model with equipment cost data and process experience in the lab, we find that the production cost of these variations will likely be lower per wafer than standard HJT, with the main cost drivers being the cost of the ALD precursors at high-volume production. We then considered what efficiency is required for these sequences to be cost effective in $/W and discuss whether these targets are technically feasible. This work motivates further work in developing these ALD TMO processes to increase their efficiency towards their theoretical limits to take advantage of the processing cost advantage.

14 SOLAR ENERGY↗
DOE OSTI2022

Temperature and illumination dependence of silicon heterojunction solar cells with a wide range of wafer resistivities

Abstract Recently, the significant improvements in the surface and contact passivation of silicon (Si) solar cells as well as their bulk quality have shifted their operating point to higher injections. Hence, they are less dependent on wafer doping. This shift opens an opportunity of using high‐resistivity wafers for practical photovoltaic applications, introducing a promising approach to push the cell efficiency towards the intrinsic limit and to improve the module reliability by increasing the cell breakdown voltage. Therefore, insights into the performance of Si solar cells using high‐resistivity wafers at various operating temperatures are of significant interest. In this study, we investigate the temperature‐ and illumination‐dependent performance of Si heterojunction (SHJ) solar cells using a wide range of wafer resistivities (between 3 and 1000 Ω⋅cm). Although a reduction in the passivation quality of the passivating contacts is observed at elevated temperature, the impact on the temperature coefficient of the open‐circuit voltage (TC V oc )—the dominant contributor to the temperature coefficient (TC) of the cell efficiency—is very limited. Their TC V oc are still dominated by the temperature dependence of the effective intrinsic carrier concentration. Furthermore, we also find that the investigated cells are more sensitive to temperature variation at lower illumination intensities. It is noteworthy that the efficiency of the cells fabricated using high‐resistivity wafers is comparable to that of the reference cells at any given temperature, highlighting the potential of using high‐resistivity wafers for solar cells.

14 SOLAR ENERGY↗
DOE OSTI2021

Influence of the Bulk Resistivity on Silicon Heterojunction Solar Cells and Module Reliability

Recent developments in industry on surface passivation open the possibility of using less doped substrates in silicon solar cells. In this report we investigate how the bulk resistivity affects the performance of silicon cells and the reliability of modules. Herein, n- and p-type silicon heterojunction cells with bulk resistivities between 3 and 15 000 Ωcm are studied. We measure the current–voltage characteristics of n-type cells across the resistivity range, and we find comparable responses to illumination intensities between 0.1 and 1 suns. The cells with bulk resistivities over 1000 Ωcm show breakdown voltages larger than -1000 V, almost two orders of magnitude higher than in typical commercial cells. Although modules have bypass-diodes to prevent cells from going into breakdown, higher breakdown voltages can improve the reliability of modules in case of bypass-diode failure and reduce the module cost by easing the number of bypass-diodes required. Finally, the cells have been submitted to light soaking. The float-zone p-type cells with bulk resistivities over 10 000 Ωcm are less sensitive to light-induced degradation than cells with bulk resistivities below 10 Ωcm. The former show to recover few hours after light soaking, while the latter recover only after dark annealing.

14 SOLAR ENERGY↗
DOE OSTI2024

Laser‐Sintered Silver Metallization for Silicon Heterojunction Photovoltaic Cells

Herein, a novel metallization technique is reported for crystalline silicon heterojunction (SHJ) solar cells in which silver (Ag) fingers are printed on the SHJ substrates by dispensing Ag nanoparticle‐based inks through a needle and then sintered with a continuous‐wave carbon dioxide (CO 2 ) laser. The impact of the Ag ink viscosity on the line quality and the line resistance is investigated on three Ag inks with different viscosities. Increasing ink viscosity yields higher Ag contact heights, larger aspect ratios, and lower line resistance values. The Ag line height increases from less than a micrometer to ≈18.62 ± 3.48 μm with the increasing viscosity. Photoluminescence imaging shows that the low‐resistance Ag metal contacts obtained do not result in any passivation damage of the SHJ substrate. This is because the wavelength of light emitted from the CO 2 laser (i.e., 10.6 μm) leads to optical absorption in the Ag, but this light is effectively transparent to the transparent conductive oxide film, amorphous silicon films, and crystalline silicon substrate. Bulk resistivity values as low as 6.5 μΩ cm are obtained for the laser‐sintered Ag contact and printed using the Ag ink with the highest viscosity in this work.

Mousumi, Jannatul Ferdous↗
DOE OSTI2023

Photoelectrochemical and Photovoltaic Performance of As-deposited Ink-based CuInS 2 Heterojunction Thin Film

In this report, we demonstrate low-temperature ink-based fabrication of CuInS 2 -based photoelectrodes for hydrogen production capable of producing photocurrent densities as high as 8.8mA.cm -2 . In this process, molecular ink made of metal chlorides and thiourea dissolved in methanol was spin coated onto Mo-coated soda lime glass substrates. Samples were then placed on a hot plate (sample surface temperature: 250°C) to induce CuInS 2 formation and remove the solvent and by-products. No further processing, such as high temperature sulfurization, was performed. Further, the CuInS 2 films were then integrated as photocathode for hydrogen evolution by photoelectrodeposition of Pt nanoparticles. Photocurrent density of 0.4mA.cm -2 at 0V vs. RHE was detected from such electrodes. However, samples coated with CdS/ZnO/ITO overlayers forming heterojunction prior to Pt deposition exhibited significant improvement of the photocurrent density, reaching 8.8mA.cm -2 at 0V vs. RHE, highlighting the improved charge transfer by the p-n junction formed at the CuInS 2 /CdS interface. The charge transfer resistance of the CuInS 2 /CdS/ZnO/ITO-Pt photoelectrode was almost 5 times lower than that of the CuInS 2 -Pt photoelectrode as revealed by electrochemical impedance spectroscopy analysis. In addition, the onset potential was shifted by ca. 0.45V toward the anodic direction, reaching 0.75V vs. RHE. Solar cell made of identical structure (Mo/CuInS 2 /CdS/ZnO/ITO) showed power conversion efficiency of 2.1% with short-circuit photocurrent density and open circuit voltage of 7.4mA.cm -2 and 820mV, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

High-Performance All-Polymer Solar Cells and Photodetectors Enabled by a High-Mobility n-Type Polymer and Optimized Bulk-Heterojunction Morphology

All-polymer solar cells (all-PSCs) and all-polymer photodetectors (all-PPDs) are promising for application in flexible electronics, but their performance is greatly limited by the lack of polymer acceptors and the difficulties in morphology control. Herein, we report the use of a high-mobility n-type polymer semiconductor, PNDI-DTBT, for fabricating high-performance all-PSCs and all-PPDs. By pairing PNDI-DTBT with a matched polymer donor, a prominent power conversion efficiency of 8.5% was obtained in all-PSCs, demonstrating the great potential of high-mobility n-type polymers with a conventional donor–acceptor skeleton for photovoltaic application. Moreover, all-PPDs with a low dark current density of 1.32 × 10 –8 A cm –2 at –0.1 V bias and a high specific detectivity of 4.77 × 10 12 Jones were achieved, which belong to the best results of organic photodetectors. Morphology investigations revealed that the formation of a bicontinuous interpenetrating network with optimal phase separation scale, high domain purity, and preferential vertical composition distribution in the bulk-heterojunction active layer contribute to the remarkable device performance. Furthermore, these results suggest that combining high-mobility n-type polymers and morphology optimization is fruitful to achieving high-performance all-PSCs and all-PPDs.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Real-Space Constrained Density Functional Theory Investigation of Site-Specific, Interfacial Charge Recombination Dynamics Across the Au Nanoparticle/TiO 2 Heterojunction

Au nanoparticle (NP)/TiO 2 heterojunction is a representative system to study interfacial charge transfer in photocatalysis and photovoltaics, where suppressing recombination from TiO 2 to Au can enhance hot carrier extraction. We apply real-space constrained density functional theory (CDFT) with Marcus theory to quantify charge recombination time scales across Au/TiO 2 . This approach enables direct control and visualization of charge-separated states, aligning with site-specific probes like time-resolved X-ray photoelectron spectroscopy (trXPS). We find that the charge-separated state features a bipolaron, with recombination dominated by TiO 2 LUMO to Au HOMO transitions, primarily at interfacial Au sites. Marcus rate predictions are benchmarked with surface hopping methods, quantifying differences in time scales and computational efficiency. Lastly, we examine how the Au cluster size affects the free energy change (ΔG) and reorganization energy (λ), explaining trends in closed-shell systems and highlighting challenges for open-shell extrapolations. Overall, CDFT + Marcus theory provides efficient, mechanistically transparent interfacial charge transfer modeling, and we clearly defined its applicability and limitation.

Glenna, Drew M. [Univ. of Idaho, Idaho Falls, ID (↗
DOE OSTI2020

Universal and versatile morphology engineering via hot fluorous solvent soaking for organic bulk heterojunction

After explosive growth of efficiency in organic solar cells (OSCs), achieving ideal morphology of bulk heterojunction remains crucial and challenging for advancing OSCs into consumer market. Herein, by utilizing the amphiphobic nature and temperature-dependent miscibility of fluorous solvent, hot fluorous solvent soaking method is developed to optimize the morphology with various donor/acceptor combinations including polymer/small-molecule, all-polymer and all-small-molecule systems. By immersing blend film into hot fluorous solvent which is utilized as liquid medium with better thermal conductivity, the molecular reorganization is accelerated. Furthermore, fluorous solvent can be miscible with the residue of chloroform and chloronaphthalene above upper critical solution temperature. This mixed solvent diffuses around inside the active layer and selectively promotes molecular reorganization, leading to optimized morphology. Compared to widely-used thermal annealing, this approach processed under mild conditions achieves superior photovoltaic performance, indicating the practicality and universality for morphological optimization in OSCs as well as other optoelectronic devices.

14 SOLAR ENERGY↗
DOE OSTI2020

Bimolecular crystal instability and morphology of bulk heterojunction blends in organic and perovskite solar cells

The performance of polymer:fullerene bulk heterojunction (BHJ) solar cells is significantly influenced by the morphology of electron donor and acceptor blends under the premise that electronic structure is complimentary regarding donor and acceptor materials. There are many cases where intimate mixing of donor and acceptor perturbs the electronic structure, which fundamentally changes the transport and photovoltaic characteristics. In this work, we present the bimolecular crystal packing of polymers and fullerenes, and investigate the correlation between device performance and structural details. We find that bimolecular crystallization can reorganize polymer chain packing, leading to poor electron transport and device performance. The size compatibility and the passivation of entropy penalty led to cocrystallization instability, which was clearly seen by in situ GIWAXS data. PC 61 BM is found to intercalate into side chains of PQT by reorganizing both PQT and PC 61 BM, forming stable, highly ordered bimolecular crystals. The poor electron transport in bimolecular crystal domain could account for the poor device performance in both perovskite and organic solar cells. Bis-PC 61 BM, on the other hand, only forms loosely packed aggregates in solution, and then rapidly phase separated into large domains with an edge-on interfacial orientation and performed poorly in solar cells.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Charge generation mechanism tuned via film morphology in small molecule bulk-heterojunction photovoltaic materials

Small organic molecules have emerged as promising component materials for organic photovoltaic devices. Compared to most conjugated polymers for the same application, small molecules have unique morphologies that promote electronic processes relevant to organic solar cell (OSC) function that can be significantly different from those of conjugated polymeric materials. Here we investigate constituent loading-dependent effects on OSC morphology and function using the classical fullerene acceptor, PC 61 BM, in a heterojunction blend with the small molecule donor, NDT (thiophene-capped diketopyrrolopyrrole naphthodithiophene). The evolution of active layer morphology as well as exciton speciation and dynamics as a function of the PC 61 BM content are examined in combined structural studies using GIWAXS and spectroscopic studies using transient absorption spectroscopy. We observe evidence for three types of coexisting excitons and details of the interplay between them determines the yield of charge separated states that afford sustained device efficiency.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Quantitative relationships between film morphology, charge carrier dynamics, and photovoltaic performance in bulk-heterojunction binary vs. ternary acceptor blends

Addressing pertinent and perplexing questions regarding why nonfullerene acceptors (NFAs) promote higher power conversion efficiencies (PCEs) than traditional fullerenes and how photoactive bulk heterojunction (BHJ) film morphology, charge photogeneration, and recombination dynamics dictate solar cell performance have stimulated many studies of polymer solar cells (PSCs), yet quantitative relationships remain limited. Better understanding in these areas offers the potential to advance materials design and device engineering, afford higher PCEs, and ultimate commercialization. Here we probe quantitative relationships between BHJ film morphology, charge carrier dynamics, and photovoltaic performance in model binary and ternary blend systems having a wide bandgap donor polymer, a fullerene, and a promising NFA. We show that optimal PC 71 BM incorporation in a PBDB-TF:ITIC-Th binary system matrix retains the original π-face-on orientation, ITIC-Th crystallinity and BHJ film crystallite dimensions, and reduces film upper surface ITIC-Th segregation. Such morphology changes together simultaneously increase hole (μ h ) and electron (μ e ) mobilities, facilitate light-activated ITIC-Th to PC 71 BM domain electron delocalization, reduce free charge carrier (FC) bimolecular recombination (BR) within PBDB-TF:ITIC-Th mixed regions, and increase FC extraction pathways viaPBDB-TF:PC 71 BM pairs. The interplay of these effects yields significantly enhanced inverted cell short-circuit current density (J SC ), fill factor (FF), and PCE. Unexpectedly, we also find that excessive PC 71 BM in the PBDB-TF:ITIC-Th binary system alters the PBDB-TF orientation to π-edge-on, increases large scale PC 71 BM-rich aggregations and BHJ upper surface PC 71 BM composition. Further, these morphology changes increase parasitic decay processes such as intersystem crossing from photoexcited PC 71 BM, compromising the J SC , FF, and PCE metrics. ITIC-Th X-ray diffraction reveals a unique sidechain-dominated molecular network with previously unknown sidechain-end group stacking, rationalizing the STEM and GIWAXS results, photophysics, and the high μ e . DFT computation reveals charge transfer networks within ITIC-Th crystallites, supporting excited-state electron delocalization from ITIC-Th to PC 71 BM. This structure–property understanding leads to a newly reported NFA blend with PCE near 17%.

14 SOLAR ENERGY↗