SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Ultraviolet luminescent excitation spectrum, reflection spectrum, and photoemission correlation with interband transition in single crystal hexagonal zinc sulfide
Mixtures of hexagonal and cubic cadmium sulphide analyzed by electron diffraction of polycrystalline material
Bearings of titanium, cobalt, and other hexagonal crystal alloys are used in vacuum and high temperature environments. These temperature-stabilized alloys have reduced friction and wear characteristics and therefore have potential use in aircraft seals, hydraulic equipment, and artificial human joints.
Friction and wear of hexagonal metals and alloys as related to crystal structure and lattice parameters in vacuum
Friction and wear of hexagonal metals and alloys as related to crystal structure and lattice parameters in vacuum
Hyperfine structure and modified Zeeman effect in trivalent holmium in hexagonal lanthanum trichloride
Crystal structure and lattice parameter effects on single and polycrystalline metals adhesion, friction and wear properties, discussing basal slip hexagonal metals
Forced convection heat-transfer data for hydrogen flow through heated parallel hexagonal passages
Ultrastructure and variable aperture pore function of hexagonal subunits in plasma membranes
Hexagonal and nonhexagonal cell phenolic honeycomb design as energy dissipating material noting processing, composite constituents, cell configuration and usage environment
Thinning algorithms on rectangular, hexagonal, and triangular arrays
An investigation was conducted in the Langley 20-inch Mach 6 tunnel to define the aerodynamic heat transfer to the radioisotope fuel cask (heat source) of the SNAP-19/Pioneer power system. The shape of the SNAP-19/Pioneer heat source is that of a hexagonal prism with flat ends; the fineness ratio, based on maximum (edge to edge) diameter, is 1.61. Phase-change-paint heat-transfer data and schlieren photographs were obtained on four possible 1/2-scale entry configurations of the SNAP-19/Pioneer heat source. Tests were conducted over a wide range of attitudes and at nominal Reynolds numbers, based on the length of the unablated configuration, of 33,000; 84,000; and 2,200,000.
Selection of a particular signal set array for a bandwidth-constrained multiple phase-and-amplitude-shift-keyed (MPASK) communication system for a linear additive Gaussian noise channel requires consideration of factors such as average and/or peak power vs symbol error probability, signal amplitude dynamic range, simplicity of generation and detection, and number of bit errors per symbol error (Gray code properties). A simple technique is presented for generating and optimally detecting the honeycomb (hexagonal) signal set, i.e., the signal set that has the tightest sphere-packing properties. The symbol and bit error probability performance of this set is compared to other two-dimensional signal sets that have been investigated in the literature, and is shown to be slightly superior from an average power standpoint. The paper concludes with a comparison of all of these signal sets from the standpoint of the factors listed above.
The concentrating properties of specularly reflecting pyramids, hexagons and circular cones are examined. The concentration factor is determined as a function of the coefficient of reflection and the shape and orientation of the incident sunlight. Reflector designs allowing multiple reflections for both normal and oblique incidence are considered.
Experiment and analysis have been used to characterize the modes of vibration of planar radial rib and hoop hexagonal platforms. Finite element analysis correlated very well with experimental results. The sensitivity of mode shapes and frequencies to cable stiffness and initial tension is presented. Threshold values have been identified, above which changes in cable stiffness do not affect the first few platform vibration modes. Primary vibration modes of the radial rib platform involve beam bending. Vibration modes of the hoop platform exhibit both beam bending and frame bending and torsion. Results indicate for low order polygonal structures, the radial rib concept produced a higher fundamental frequency. For high order polygonal structures, the hoop concept has the potential to achieve a higher fundamental frequency than the radial rib concept.
Laboratory experiments have been performed to demonstrate the capabilities of a gamma-ray imaging system employing a NaI Anger camera and a rotating coded aperture mask. The mask incorporates in its design a new type of hexagonal uniformly redundant array (HURA) which is essentially antisymmetric under 60 deg rotation. The image formation techniques are described and results are presented that demonstrate the imaging capability of the system for individual and multiple point sources of gamma-ray emission. The results are compared to analytical predictions for the imaging and point source localization capabilities of coded aperture systems using continuous detectors.
X-ray diffraction is presently used to determine the thermal expansion of the hexagonal (6H) polytype of alpha-SiC over the 20-1000 C range. The principal (alpha-11 and alpha-33) axial coefficients of thermal expansion can be expressed by second-order polynomials; the former is noted to be larger than the latter over the entire temperature range, while the thermal expansion anisotropy increases continuously with increasing temperature. The thermal expansion and thermal expansion anisotropy obtained are compared with previously published results for the (6H) polytype, and discussed with respect to the structure.
The light scattering and absorption programs of Cai and Liou (1982) and Takano and Jaweera (1985) are extended to include hexagonal ice crystals randomly and horizontally oriented in space. The scattering and polarization results for the ice crystals are calculated. The results are compared with measurement data. The single-scattering properties for horizontally oriented columns and plates are presented and used to explain halos and arcs observed in the atmopshere. In the second section, the theory and computations for multiple scattering in cirrus clouds containing oriented ice crystals are presented. The radiative transfer in clouds composed of horizontally oriented ice crystals is formulated. Also, reflected and transmitted intensities, planetary albedo, and polarization in multiple scattering by ice crystals are discussed.