Search NASA⌕ Search

SEARCH · Search NASA

Results for “high-power laser”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

A long-pulse amplifier for solar-pumped iodine lasers

The characteristics of a photodissociation iodine-laser amplifier pumped with a solar-simulating radiation were studied. Under long-pulse energy extraction, an energy amplification of about three and an energy storage time of longer than 500 microseconds were observed for a one meter long, 10 mm i.d. amplifier tube. The effects of elevated temperatures resulted in little reduction of the amplifier gain. These results confirm that developing an efficient chain of oscillator-amplifiers for a high-power solar-pumped iodine laser is indeed feasible.

Hwang, I. H.↗
NASA NTRS1989

Free-Space Power Transmission

NASA Lewis Research Center organized a workshop on technology availability for free-space power transmission (beam power). This document contains a collection of viewgraph presentations that describes the effort by academia, industry, and the national laboratories in the area of high-frequency, high-power technology applicable to free-space power transmission systems. The areas covered were rectenna technology, high-frequency, high-power generation (gyrotrons, solar pumped lasers, and free electron lasers), and antenna technology.

Source record↗
NASA NTRS1987

0.87-micron CSP diode lasers for spaceborne communications

Index-guided channeled-substrate-planar (CSP) AlGaAs diode lasers are being developed for reliable, high-power operation for use as sources in spaceborne optical communications systems. Although most work on this AlGaAs structure has been aimed at optimizing performance at output wavelengths less than 8400 A, emission in the 8700 A regime is also of interest. In particular, such wavelengths are required for use in the direct detection laser transceiver to be incorporated into NASA's advanced communications technology satellite, in order to avoid absorption of the light by the atmosphere when communicating with ground-based terminals. Lowest order spatial mode and substantially single longitudinal mode output has been observed in 0.87-micron CSP devices in excess of 50 mW cw and 100 mW 50 percent duty-cycle, with rms phase-front aberrations measured to be about lambda/40.

Carlin, D. B.↗
NASA NTRS1977

Recombination lasing in a magnetoplasmadynamic arcjet

The plasmadynamic recombination laser concept is verified experimentally in a high-power quasisteady MPD arcjet operating at 4 kA and 12 g/sec of argon. Measurements of the spatial variation of electron temperature, electron density, and population densities in the arc exhaust flow confirm that inverted populations of the 4p to 4s ArII transitions are established by collisional-radiative recombination of the ArIII ion. Using an optical cavity aligned transversely to the flow, recombination lasing of four such transitions, 5145, 4880, 4764, and 4727 A, is observed spectrophotographically and photoelectrically over the entire 1-msec discharge.

Campbell, E. M.↗
NASA NTRS1980

Recombination lasing in a magnetoplasmadynamic arcjet

The plasmadynamic recombination laser concept is verified experimentally in a high-power quasisteady MPD arcjet operating at 4 kA and 12 g/sec of argon. Measurements of the spatial variation of electron temperature, electron density, and population densities in the arc exhaust flow confirm that inverted populations of the 4p to 4s Ar II transitions are established by collisional-radiative recombination of the Ar III ion. Using an optical cavity aligned transversely to the flow, recombination lasing of seven such transitions, 5145, 4880, 4764, 4727, 4658, 4579, and 4545 A, is observed spectrophotographically and photoelectrically over the entire 1-msec discharge.

Campbell, E. M.↗
NASA NTRS1985

The effects of wavelength on coherent Doppler lidar performance

Hitherto, long-range wind-sensing coherent (heterodyne) lidars have utilized CO2 lasers (operating at a 10-micrometer wavelength) since these were the only high-power single-mode (spatial and axial) pulsed sources available. This property ensures temporal coherence over the required spatial resolution, e.g., the pulse length. Recent developments in Nd:YAG lasers makes possible the consideration of a 1.06-micrometer source (Kane et al., 1984). The relative merit of operation at various wavelengths is a function of system parameter, backscattering cross section, signal processing, beam propagation, and practical and eye safety considerations. These factors are discussed in the context of a global wind-sensing coherent lidar.

Lawrence, T. R.↗
NASA NTRS1977

A pulser-sustainer carbon monoxide electric-discharge supersonic laser

Operation of a CW CO electric-discharge supersonic laser with a pulser-sustainer discharge is described. High-power operation as well as independent control over electron energy and density are demonstrated. Maximum input power achieved to date is 100 kW. The maximum output power is 6 kW or 10% of the sustainer positive-column power. Much improved performance appears possible.

Monson, D. J.↗
NASA NTRS1984

High-power radiating plasma

The physical principles underlying the use of radiating plasmas for the optical pumping of lasers are described. Particular consideration is given to the properties of radiating plasmas; radiation selectivity; the dynamics, equilibrium, and stability of radiating plasmas; the radiative Reynolds number; and experimental results on radiating discharges.

Rozanov, V. B.↗
NASA NTRS1985

Research on solar pumped liquid lasers

A solar pumped liquid laser that can be scaled up to high power (10 mW CW) for space applications was developed. Liquid lasers have the advantage over gases in that they provide much higher lasant densities and thus high-power densities. Liquids also have advantages over solids in that they have much higher damage thresholds and are much cheaper to produce for large scale applications. Among the liquid laser media that are potential candidates for solar pumping, the POC13: Nd sup 3+:ZrC14 liquid was chosen for its high intrinsic efficiency and its relatively good stability against decomposition due to protic contamination. The development of a manufacturing procedure and performance testing of the laser, liquid and the development of an inexpensive large solar concentrator to pump the laser are examined.

Cox, J. D.↗
NASA NTRS1986

Timed Multiple-Laser Array

Pulse power, frequency, and shape variable and combined to suit particular applications. Versatile laser system combines high power with high efficiency, long life, and low cost. System consists of array of excimer lasers fired under microcomputer control. When fired in unison, array produces high-power pulse at higher efficiency than otherwise possible. When fired in sequency, array produces pulses at a high rate without unduly stressing components and shortening their lives.

Laudenslager, J. B.↗
NASA NTRS1979

LaRC results on nuclear pumped noble gas lasers

The recent experiment and theoretical results obtained for noble gas nuclear laser systems are presented. It is shown that the noble gas lasers are among the easiest systems to pump by nuclear excitation and as a result, all of the noble gases except He have lased under nuclear excitation. The noble gas systems are not ideal for high-power applications but they do give valuable insight into the operation and pumping mechanisms associated with nuclear lasers. At present, the Ar-Xe system is the best noble gas candidate for (U-235)F6 pumping. It appears that the quenching of Ar-Xe lasing is a result of the fluorine and not the uranium or fission fragments themselves. Thus, to achieve lasing with UF6, a fluorine compatible system must be found.

Deyoung, R. J.↗
NASA NTRS1975

Dense plasma focus production in a hypocycloidal pinch

A type of high-power pinch apparatus consisting of disk electrodes was developed, and diagnostic measurements to study its mechanism of dense plasma production were made. The collapse fronts of the current sheets are well organized, and dense plasma focuses are produced on the axis with radial stability in excess of 5 microns. A plasma density greater than 10 to the 18th power/cubic cm was determined with Stark broadening and CO2 laser absorption. A plasma temperature of approximately 1 keV was measured with differential transmission of soft X-rays through thin foils. Essentially complete absorption of a high-energy CO2 laser beam was observed. The advantages of this apparatus over the coaxial plasma focus are in (1) the plasma volume, (2) the stability, (3) the containment time, (4) the easy access to additional heating by laser or electron beams, and (5) the possibility of scaling up to a multiple array for high-power operation.

Lee, J. H.↗
NASA NTRS1977

Production of dense plasmas in a hypocycloidal pinch apparatus

A high-power pinch apparatus consisting of disk electrodes was developed, and diagnostic measurements to study its mechanism of dense plasma production have been made. The collapse fronts of the current sheets are well organized, and dense plasma foci are produced on the axis with radial stability in excess of 5 microsec. A plasma density greater than 10 to the 18th power per cu cm is determined with Stark broadening and CO2 laser absorption. Essentially complete absorption of a high-energy CO2 laser beam has been observed. A plasma temperature of approximately 1 keV is measured with differential transmission of soft X-rays through thin foils. The advantages of this apparatus over the coaxial plasma focus are improvements in (1) plasma volume, (2) stability, (3) containment time, (4) access to additional heating by laser or electron beams, and (5) the possibility of scaling up to a multiple array for high-power operation.

Lee, J. H.↗
NASA NTRS1989

Stratospheric ozone measurements using a ground-based, high-power lidar

A lidar facility has been established at the JPL-Table Mountain Observatory at an altitude of 2300 m in the San Gabriel Mountains northeast of Los Angeles. This facility uses the laser remote sensing technique of differential absorption lidar (DIAL) to derive atmospheric ozone concentration profiles. Two separate systems are used to obtain the ozone profile: an Nd:YAG based troposphere system will measure from the ground to 20 km and an excimer based system measures from 15 km to 50 km. The systems are designed to make long-term measurements so that small changes in the ozone abundance can be detected. This paper will describe the stratospheric ozone lidar system and present some of the results which have been obtained since it began routine operation in January 1988.

Mcdermid, I. Stuart↗
NASA NTRS1986

Ultrasonic nondestructive materials characterization

A brief review of ultrasonic wave propagation in solid materials is presented with consideration of the altered behavior in anisotropic and nonlinear elastic materials in comparison with isotropic and linear elastic materials. Some experimental results are described in which ultrasonic velocity and attenuation measurements give insight into materials microstructure and associated mechanical properties. Recent developments with laser beam non-contact generation and detection of ultrasound are presented. The results of several years of experimental measurements using high-power ultrasound are discussed, which provide substantial evidence of the inability of presently accepted theories to fully explain the interaction of ultrasound with solid materials. Finally, a special synchrotron X-ray topographic system is described which affords the possibility of observing direct interaction of ultrasonic waves with the microstructural features of real crystalline solid materials for the first time.

Green, R. E., Jr.↗
NASA NTRS1989

Analysis of Nd3+:glass, solar-pumped, high-powr laser systems

The operating characteristics of Nd(3+):glass lasers energized by a solar concentrator were analyzed for the hosts YAG, silicate glass, and phosphate glass. The modeling is based on the slab zigzag laser geometry and assumes that chemical hardening methods for glass are successful in increasing glass hardness by a factor of 4. On this basis, it was found that a realistic 1-MW solar-pumped laser might be constructed from phosphate glass 4 sq m in area and 2 mm thick. If YAG were the host medium, a 1-MW solar-pumped laser need only be 0.5 sq m in area and 0.5 cm thick, which is already possible. In addition, Nd(3+) doped glass fibers were found to be excellent solar-pumped laser candidates. The small diameter of fibers eliminates thermal stress problems, and if their diameter is kept small (10 microns), they propagate a Gaussian single mode which can be expanded and transmitted long distances in space. Fiber lasers could then be used for communications in space or could be bundled and the individual beams summed or phase-matched for high-power operation.

Zapata, L. E.↗
NASA NTRS1978

Rapid laser induced energy transfer in atomic systems

Analytical and experimental studies of the rapid transfer of stored populations from metastable states to selected target states of a different species are reported. Both laser-induced or laser-switched collision and laser-induced two-photon spontaneous emission are described. It is shown that the laser-induced collision method is particularly useful in the visible and UV spectral regions. It has applications in photochemistry, gas-phase kinetics, and in high-power, high-energy gas-phase lasers. The anti-Stokes source is useful in the VUV and soft X-ray spectral regions.

Harris, S. E.↗
NASA NTRS1973

High-power broadly tunable difference-frequency generation in proustite.

High-power wavelength-tunable coherent radiation has been produced by generating the difference frequency between the output from a tunable narrow-linewidth ruby-pumped infrared dye laser and a Q-switched ruby laser in a proustite crystal. Peak infrared powers in the kilowatt range and wavelength tunability from 3.20 to 5.65 microns have been achieved. The experimentally determined infrared power tuning curves are compared to those predicted by theory for interacting Gaussian light beams.

Decker, C. D.↗