Search NASA⌕ Search

SEARCH · Search NASA

Results for “hull structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

First-principles study of crystal structure and stability of T 1 precipitates in Al-Li-Cu alloys

Aluminum-lithium-copper alloys have a low density, high elastic modulus and high specific strength.Due to this combination of properties, alloys strengthened with the ternary (Al-Li-Cu) T 1 phase have attracted a great deal of interest especially in aerospace applications. Determining the atomic structuralinformation of the precipitate is a fundamental step in developing a basis for advanced alloy design; however, even though many experimental studies have addressed the T 1 crystal structure, it remains the subject of some controversy. Here, we use density functional theory (DFT) calculations to investigate the structure and composition of the T 1 phase by comparing the energetic stability of five previously-proposed models of the crystal structure of T 1 . The DFT formation energy of these proposed T 1 crystal structures was calculated using a special quasi-random structure (SQS) approach to describe a disordered Al-Cu sub-lattice. In conflict with the experimental phase diagram, DFT calculations of all five proposed models result in an energetically unstable T 1 phase. Here, we search for a new, lower-energy structure of T 1 using a cluster expansion approach, and find a new structural model with DFT energy that is stable (at T = 0 K), i.e., on the calculated convex hull of the Al-Li-Cu ternary system. However, this new predicted phase does not have a tie-line with Al, but the formation energy of the phase is very close to the energy required to make a tie-line with Al (Δ E = 0.013 eV/atom), which could be affected by finite temperature entropic effects (i.e., vibrational entropic stabilization).

36 MATERIALS SCIENCE↗

A comparative study between experimental results and numerical predictions of multi-wall structural response to hypervelocity impact

Over the last three decades, multiwall structures have been analyzed extensively, primarily through experiment, as a means of increasing the protection afforded to spacecraft structure. However, as structural configurations become more varied, the number of tests required to characterize their response increases dramatically. As an alternative, numerical modeling of high-speed impact phenomena is often being used to predict the response of a variety of structural systems under impact loading conditions. This paper presents the results of a preliminary numerical/experimental investigation of the hypervelocity impact response of multiwall structures. The results of experimental high-speed impact tests are compared against the predictions of the HULL hydrodynamic computer code. It is shown that the hypervelocity impact response characteristics of a specific system cannot be accurately predicted from a limited number of HULL code impact simulations. However, if a wide range of impact loadings conditions are considered, then the ballistic limit curve of the system based on the entire series of numerical simulations can be used as a relatively accurate indication of actual system response.

Schonberg, William P.↗

Method and program product for determining a radiance field in an optical environment

A hybrid method is presented by which Monte Carlo techniques are combined with iterative relaxation techniques to solve the Radiative Transfer Equation in arbitrary one-, two- or three-dimensional optical environments. The optical environments are first divided into contiguous regions, or elements, with Monte Carlo techniques then being employed to determine the optical response function of each type of element. The elements are combined, and the iterative relaxation techniques are used to determine simultaneously the radiance field on the boundary and throughout the interior of the modeled environment. This hybrid model is capable of providing estimates of the under-water light field needed to expedite inspection of ship hulls and port facilities. It is also capable of providing estimates of the subaerial light field for structured, absorbing or non-absorbing environments such as shadows of mountain ranges within and without absorption spectral bands such as water vapor or CO.sub.2 bands.

Reinersman, Phillip N.↗

Stability and magnetic behavior of exfoliable nanowire one-dimensional materials

Low-dimensional materials can display enhanced electronic, magnetic, and quantum properties. Here we use the topological scaling algorithm to identify all sufficiently metastable materials in the Materials Project database to identify bulk crystals with one-dimensional (1D) structural motifs: Five hundred fifty-one crystals that are within 50 meV atom –1 of the thermodynamic hull display 1D motifs, where 293 of these contain d-valence elements, which we focus on in this work. After exfoliating nanowires from 263 of these materials and calculating their thermodynamic stability using density functional theory, 103 nanowires meet per-atom and per-Ångström thermodynamic stability criteria. We illustrate for three nanowire systems that a variety of local minima can be present in these systems, demonstrating one case of a Peierls distortion. The wires display a broad diversity of electronic and magnetic properties of these nanowires, with 14 metals, 7 half-metals, and 82 semiconductors and insulators, and 41 nanowires displaying magnetic moments ranging from 0.1 to 5μ B per d-valence species when assuming ferromagnetic order. A subset of these chains are investigated for the impact of magnetic ordering, identifying 1D FeCl 3 to be most stable in an antiferromagnetic state. The electronic and magnetic properties of the identified 1D materials could enable applications in spintronic and quantum devices.

36 MATERIALS SCIENCE↗

Ternary alloy material prediction using genetic algorithm and cluster expansion

This thesis summarizes our study on the crystal structures prediction of Fe-V-Si system using genetic algorithm and cluster expansion. Our goal is to explore and look for new stable compounds. We started from the current ten known experimental phases, and calculated formation energies of those compounds using density functional theory (DFT) package, namely, VASP. The convex hull was generated based on the DFT calculations of the experimental known phases. Then we did random search on some metal rich (Fe and V) compositions and found that the lowest energy structures were body centered cube (bcc) underlying lattice, under which we did our computational systematic searches using genetic algorithm and cluster expansion. Among hundreds of the searched compositions, thirteen were selected and DFT formation energies were obtained by VASP. The stability checking of those thirteen compounds was done in reference to the experimental convex hull. We found that the composition, 24-8-16, i.e., Fe 3 VSi 2 is a new stable phase and it can be very inspiring to the future experiments.

36 MATERIALS SCIENCE↗

High temperature crystal structures and superionic properties of SrCl{sub 2}, SrBr{sub 2}, BaCl{sub 2} and BaBr{sub 2}

The structural properties of the binary alkaline-earth halides SrCl{sub 2}, SrBr{sub 2}, BaCl{sub 2} and BaBr{sub 2} have been investigated from ambient temperature up to close to their melting points, using the neutron powder diffraction technique. Fluorite-structured SrCl{sub 2} undergoes a gradual transition to a superionic phase at 900-1100 K, characterised by an increasing concentration of anion Frenkel defects. At a temperature of 920(3) K, the tetragonal phase of SrBr{sub 2} undergoes a first-order transition to a cubic fluorite phase. This high temperature phase shows the presence of extensive disorder within the anion sublattice, which differs from that found in superionic SrCl{sub 2}. BaCl{sub 2} and BaBr{sub 2} both adopt the cotunnite crystal structure under ambient conditions. BaCl{sub 2} undergoes a first-order structural transition at 917(5) K to a disordered fluorite-structured phase. The relationship between the (disordered) crystal structures and the ionic conductivity behaviour is discussed and the influence of the size of the mobile anion on the superionic behaviour is explored. - Graphical abstract: Anomalous behaviour of the lattice expansion of SrCl{sub 2} at temperatures of {approx}1000 K is associated with the gradual transition to a superionic phase, whilst SrBr{sub 2} undergoes a first-order structural transition ({beta}{yields}{alpha}) to a fluorite-structured superionic phase at 920(3) K. Highlights: > Anomalous behaviour of the lattice expansion of SrCl{sub 2} occurs at temperatures {approx}1000 K. > Crystal structure of {beta}-SrBr{sub 2} is described in detail. > On heating, SrBr{sub 2} and BaCl{sub 2} transform to a fluorite-structured superionic phase. > Temperature dependence of the BaCl{sub 2} and BaBr{sub 2} structures is presented. > Nature of the superionic phases within the alkaline-earth halides is discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Machine Learning-Guided Exploration of Ternary Metal Borohydrides

We employ deep machine learning (ML) combined with first-principles calculations to explore energetically favorable ternary metal borohydrides. Using La–B–H as a prototype system, we demonstrate that iteratively trained ML models can efficiently screen hundreds of thousands of hypothetical structures and accurately select a small fraction of promising structures and compositions for further studies by first-principles calculations. Such an ML-guided approach dramatically accelerates the pace of materials discovery. A number of new La–B–H ternary compounds with formation energies within 100 meV/atom above the known ternary convex hull are discovered, including a known stable La(BH 4 ) 3 phase. Moreover, by replacing La with Group 1, 2, 3, 13, and 14 elements in the four lowest-energy La–B–H structures from our ML-guided predictions, several low-energy X–B-H (X = Mg, Ca, Sr, Ba, Sc, Y, Ac, Al, Ga, In, Si, Ge, Sn, Pb) compounds are predicted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evolutionary optimization of a Genetically Refined Truss

Structural optimization is a field of research that has experienced noteworthy growth for many years. Researchers in this area have developed optimization tools to successfully design and model structures, typically minimizing mass while maintaining certain deflection and stress constraints. Numerous optimization studies have been performed to minimize mass, deflection and stress on a benchmark cantilever truss problem. Predominantly traditional optimization theory is applied to this problem. The cross-sectional area of each member is optimized to minimize the aforementioned objectives. This paper will present a structural optimization technique that has been previously applied to compliant mechanism design. This technique demonstrates a method that combines topology optimization, geometric refinement, finite element analysis, and two forms of evolutionary computation: Genetic Algorithms and Differential Evolution to successfully optimize a benchmark structural optimization problem. An non-traditional solution to the benchmark problem is presented in this paper, specifically a geometrically refined topological solution. The design process begins with an alternate control mesh formulation, multilevel geometric smoothing operation, and an elastostatic structural analysis. The design process is wrapped in an evolutionary computing optimization toolset.

Hull, Patrick V.↗

Evolutionary Optimization of a Geometrically Refined Truss

Structural optimization is a field of research that has experienced noteworthy growth for many years. Researchers in this area have developed optimization tools to successfully design and model structures, typically minimizing mass while maintaining certain deflection and stress constraints. Numerous optimization studies have been performed to minimize mass, deflection, and stress on a benchmark cantilever truss problem. Predominantly traditional optimization theory is applied to this problem. The cross-sectional area of each member is optimized to minimize the aforementioned objectives. This Technical Publication (TP) presents a structural optimization technique that has been previously applied to compliant mechanism design. This technique demonstrates a method that combines topology optimization, geometric refinement, finite element analysis, and two forms of evolutionary computation: genetic algorithms and differential evolution to successfully optimize a benchmark structural optimization problem. A nontraditional solution to the benchmark problem is presented in this TP, specifically a geometrically refined topological solution. The design process begins with an alternate control mesh formulation, multilevel geometric smoothing operation, and an elastostatic structural analysis. The design process is wrapped in an evolutionary computing optimization toolset.

Hull, P. V.↗

Band Gaps and Stability of CsSiX 3 Halides

There is a great current interest in lead-free halide perovskites. While Sn based and Ge based compounds of this type have already been demonstrated experimentally, Si based ones have not. In this paper, the authors consider the possibility of CsSiX 3 halide perovskites. While previous work for cubic CsSiI 3 found the band gap to close or in fact become inverted and to lead to a topological insulator, the authors show here that in the rhombohedrally distorted structure that occurs because of Si off-centering, the band gap becomes larger than 1.5 eV and possibly of interest for photovoltaics. On the other hand, even in the cubic structure at high temperature, fluctuations of the Si position, will lead to a sizable gap. Here, the total energy calculations, show that the materials are unstable toward 3CsSiI 3 → Si 2 I 6 + 3CsI + Si and 2CsSiI 3 → SiI 4 + 2CsI + Si and are thus above the convex hull. Similar results are presented for halogens: I, Br, Cl.

36 MATERIALS SCIENCE↗

A high temperature diffraction-resistance study of chalcopyrite, CuFeS{sub 2}

The electrical, magnetic and structural properties of synthetic chalcopyrite, CuFeS{sub 2}, have been studied up to 873 K using DC resistance measurements performed in-situ during neutron powder diffraction experiments. Under ambient conditions the material adopts the accepted structural model for CuFeS{sub 2} in the space group I4-bar 2d, with the magnetic moment of the Fe{sup 3+} cations aligned along [001]. The electrical resistivity is around 0.3 {Omega} cm under ambient conditions, consistent with semiconductor character, and decreases slightly with increase in temperature until a more abrupt fall occurs in the region 750-800 K. This abrupt change in resistivity is accompanied by a structural transition to a cubic zinc blende structured phase (space group F4-bar 3m) in which Cu{sup +} and Fe{sup 3+} cations are disordered over the same tetrahedral crystallographic sites and by a simultaneous loss of long-range magnetic order. The implications of these results are discussed in the context of previous studies of the chalcopyrite system. - Graphical abstract: Structural, magnetic and electrical properties of CuFeS{sub 2} to 873 K have been investigated using DC resistance measurements, performed in-situ during the collection of powder neutron diffraction data. Highlights: > Structural, magnetic and electronic properties are probed simultaneously. > A fall in resistivity at high temperatures is associated with cation disorder. > The order-disorder transition is accompanied by the loss of magnetic order. > The structural and magnetic phase transition is preceded by a 2-phase region. > Sulphur loss at high temperatures causes the phase transitions to be irreversible.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cellulose Fiber Isolation and Characterization from Sweet Blue Lupin Hull and Canola Straw

In this study, cellulose fibers were removed from crop by-products using a combination of sodium hydroxide treatment followed by acidified sodium chlorite treatment. The objective was to obtain high recovery of cellulose by optimizing treatment conditions with sodium hydroxide (5–20%, 25–75 °C and 2–10 h) followed by acidified sodium chlorite (1.7%, 75 °C for 2–6 h) to remove maximum lignin and hemicellulose, as well as to investigate the effect of lignin content of the starting materials on the treatment efficiency. Samples were characterized for their chemical composition, crystallinity, thermal behavior and morphology to evaluate the effects of treatments on the fibers’ structure. The optimum sodium hydroxide treatment conditions for maximum cellulose recovery was at 15% NaOH concentration, 99 °C and 6 h. Subsequent acidified sodium chlorite treatment at 75 °C was found to be effective in removing both hemicellulose and lignin, resulting in higher recovery of cellulose in lupin hull (~ 95%) and canola straw (~ 93%). The resultant cellulose fibers of both crop by-products had increased crystallinity without changing cellulose I structure (~ 68–73%). Improved thermal stabilities were observed with increased onset of degradation temperatures up to 307–318 °C. Morphological investigations validated the effectiveness of treatments, revealing disrupted cell wall matrix and increased surface area due to the removal of non-cellulosics. The results suggest that the optimized combination of sodium hydroxide and acidified sodium chlorite treatments could be effectively used for the isolation of cellulose fibers from sweet blue lupin hull and canola straw, which find a great number of uses in a wide range of industrial applications.

09 BIOMASS FUELS↗

Generalized seismic analysis

There is a constant need to be able to solve for enforced motion of structures. Spacecraft need to be qualified for acceleration inputs. Truck cargoes need to be safeguarded from road mishaps. Office buildings need to withstand earthquake shocks. Marine machinery needs to be able to withstand hull shocks. All of these kinds of enforced motions are being grouped together under the heading of seismic inputs. Attempts have been made to cope with this problem over the years and they usually have ended up with some limiting or compromise conditions. The crudest approach was to limit the problem to acceleration occurring only at a base of a structure, constrained to be rigid. The analyst would assign arbitrarily outsized masses to base points. He would then calculate the magnitude of force to apply to the base mass (or masses) in order to produce the specified acceleration. He would of necessity have to sacrifice the determination of stresses in the vicinity of the base, because of the artificial nature of the input forces. The author followed the lead of John M. Biggs by using relative coordinates for a rigid base in a 1975 paper, and again in a 1981 paper . This method of relative coordinates was extended and made operational as DMAP ALTER packets to rigid formats 9, 10, 11, and 12 under contract N60921-82-C-0128. This method was presented at the twelfth NASTRAN Colloquium. Another analyst in the field developed a method that computed the forces from enforced motion then applied them as a forcing to the remaining unknowns after the knowns were partitioned off. The method was translated into DMAP ALTER's but was never made operational. All of this activity jelled into the current effort. Much thought was invested in working out ways to unshakle the analysis of enforced motions from the limitations that persisted.

Butler, Thomas G.↗

An efficient algorithm for generating diverse microstructure sets and delineating properties closures

Properties closures delineate the theoretical objective space for materials design problems, allowing designers to make informed trade-offs between competing constraints and target properties. In this paper, we present a new algorithm called hierarchical simplex sampling (HSS) that approximates properties closures more efficiently and faithfully than traditional optimization based approaches. By construction, HSS generates samples of microstructure statistics that span the corresponding microstructure hull. As a result, we also find that HSS can be coupled with synthetic polycrystal generation software to generate diverse sets of microstructures for subsequent mesoscale simulations. Finally, by more broadly sampling the space of possible microstructures, it is anticipated that such diverse microstructure sets will expand our understanding of the influence of microstructure on macroscale effective properties and inform the construction of higher-fidelity mesoscale structure-property models.

36 MATERIALS SCIENCE↗

Keeping Cool in Extreme Heat

Through a partnership with Unitika Ltd., NASA's Langley Research Center created a foam based on high temperature resistant polyimide chemistry. Licensed non-exclusively to SORDAL, Inc., the low-density foam, named TEEK, can be processed into forms or used to fill structures such as honeycomb. TEEK offers superior insulation and support qualities, with heat and flame resistance abilities.TEEK is a practical selection for hull insulation in the shipbuilding industry, with numerous potential applications in aerospace applications, fire-resistant construction materials, and a wide range of consumer products that will improve safety and energy efficiency. Other opportunities are available in the areas of automotive coatings and sealants, electrical components, and recreational equipment. SORDAL has introduced its new product in several different forms, under the name "SOLREX". The company is developing a new product called SORDAL Paper(TM) that will be used in conjunction with the polyimide foam to offer thermal protection in various products, such as fire resistant garments and prosthetics.

Source record↗

Flight Tests on U.S.S. Los Angeles. Part I : Full Scale Pressure Distribution Investigation

The primary purpose of this investigation was to obtain simultaneous data on the loads and stress experience in flight by the U. S. S. Los Angeles which could be used in rigid airship structure design. A secondary object of the investigation was to determine the turning and drag characteristics of the airship. The aerodynamic loading was obtained by measuring the pressure at 95 locations on the tail surfaces, 54 on the hull, and 5 on the passenger car. These measurements were made during a series of maneuvers consisting of turns and reversals in smooth air and during a cruise in rough air which was just short of squall proportions. The results of the pressure measurements on the hull indicate that the forces on the forebody of an airship are relatively small. The tail surface measurements show conclusively that the forces caused by gusts are much greater than those caused by horizontal maneuvers. In this investigation the tail surface loadings caused by gusts closely approached the designed loads of the tail structure. The turning and drag characteristics will be reported in separate reports.

De France, S J↗

Residue detection for real-time removal of paint from metallic surfaces

Paint stripping from large steel ships and other metallic surfaces is a major issue in the maintenance and refurbishing of structures, and environmental concerns are greatly limiting the possible options. As a result, waterjet with water recycling has become the leading form of paint stripping and robotic manipulators with scanning bridges were constructed by various manufacturers to address this need. The application of such scanning bridges is slow and their access is constrained by the complex shape of the ship hull and various features on the surface. To overcome these limitations, a robotic system that is called Ultrastrip (UltraStrip Systems, Inc., Stuart, FL) is developed. This system uses magnetic wheels to attach the stripper to the structure and travel on it while performing paint stripping. To assure efficient paint stripping feedback data is required to control the travel speed by monitoring the paint thickness before and during the stripping process. Efforts at JPL are currently underway to develop the required feedback capability to assure effective paint stripping. Various possible sensors were considered and issues that can affect the sensitivity, reliability and applicability of the sensors are being investigated with emphasis on measuring the initial conditions of the paint. Issues that affect the sensory data in dynamic conditions are addressed while providing real-time real feedback for the control of the paint stripper speed of travel.

NDT↗