SEARCH · Search NASA

Results for “ion charge state”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

All sources NASA NTRS DOE OSTI

DOE OSTI2026

Nozzle geometry optimization for high-current aluminum ion beam acceleration via direct plasma injection scheme

We report the generation of a record aluminum ion beam current exceeding 58 mA at the Al 11+ charge state, accelerated to an energy of 5.5 MeV using the direct plasma injection scheme, which integrates a laser ion source (LIS) with a radio frequency quadrupole (RFQ) accelerator. The effect of nozzle geometry on beam extraction was systematically investigated using 8 and 12 mm tapered designs and an 18 mm cylindrical configuration. The 18 mm nozzle achieved the highest Al 11+ beam current, while the 12 mm aperture provided a favorable balance between beam intensity and current density. Beam extraction simulations confirmed effective RFQ matching across multiple charge states, and solenoidal field tuning further enhanced plasma collimation. This work not only establishes a new benchmark for high-current ion beam generation but also provides a fundamental understanding of plasma–beam interface dynamics crucial for the next generation of high-intensity particle accelerators, particularly those employing LIS-RFQ systems.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2020

Structural dynamics in proteins induced by and probed with X-ray free-electron laser pulses

X-ray free-electron lasers (XFELs) enable crystallographic structure determination beyond the limitations imposed upon synchrotron measurements by radiation damage. The need for very short XFEL pulses is relieved through gating of Bragg diffraction by loss of crystalline order as damage progresses, but not if ionization events are spatially non-uniform due to underlying elemental distributions, as in biological samples. Indeed, correlated movements of iron and sulfur ions were observed in XFEL-irradiated ferredoxin microcrystals using unusually long pulses of 80 fs. Here, we report a femtosecond time-resolved X-ray pump/X-ray probe experiment on protein nanocrystals. We observe changes in the protein backbone and aromatic residues as well as disulfide bridges. Simulations show that the latter’s correlated structural dynamics are much slower than expected for the predicted high atomic charge states due to significant impact of ion caging and plasma electron screening. This indicates that dense-environment effects can strongly affect local radiation damage-induced structural dynamics.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗

DOE OSTI2024

Directly Fused Porphyrin‐Tetracyanopentacenequinone Conjugates: Role of the Cross‐Conjugated, Powerful Electron Acceptor in Promoting Highly Efficient Charge Separation

Tetracyanopentacenequinone, a powerful electron acceptor, is fused directly to the porphyrin π-system to create a new class of donor-acceptor conjugates. Owing to the direct fusion and electron-deficient property of tetracyanopentacenequinone, strong intramolecular charge transfer both in the ground and excited states was witnessed. As a control, porphyrin fused with pentacenequinone was also investigated. Upon complete spectral and electrochemical characterization, the excited state properties were initially probed by time-dependent DFT studies, and the occurrence of electron transfer from different excited states was established. Free-energy calculations revealed higher exothermic electron transfer (>600 mV) than the control pentacenequinone-porphyrin systems. Pump-probe studies covering broad spatial and temporal regions revealed efficient excited state charge separation. This was unlike the control pentacenequinone-porphyrin system, where slow charge separation was witnessed only in the case of the zinc derivatives but not the free-base ones, followed by the populating of the triplet excited state. The lifetimes of the charge-separated states ranged between 30–500 ps depending on the solvent and metal ion in the porphyrin cavity. Nanosecond transient absorption studies established the charge recombination path to populate the triplet state of porphyrin or directly to the ground state as a function of solvent polarity and the nature of the conjugate. Furthermore, the significance of cross-conjugated tetracyanopentacenequinone fused directly to the porphyrin π system in promoting highly exothermic and efficient charge separation, irrespective of its cross conjugation, is borne out from this study.

Cross conjugation↗

DOE OSTI2021

Tungsten–carbon surface evolution and erosion modeling for a small angle slot divertor in DIII-D

Abstract We modeled tungsten–carbon mixed surface evolution, sputtering erosion, and transport for the tungsten coated region of a small angle slot (SAS) divertor design for the DIII-D tokamak. This divertor concept aims to achieve a closed slot dissipative plasma to minimize heat load and surface erosion, and to study high- Z material performance. Our advanced simulations use coupled ITMC-DYN material mixing/response and 3D full kinetic REDEP/WBC erosion/redeposition code packages, with divertor plasma solution from the SOLPS-ITER package with 4 MW power input. The SAS design geometry and resulting in-slot plasma parameters cause significant differences in predicted sputter/transport from a conventional divertor. For 2% C/D incident plasma ratio, an equilibrium mixed C/W surface is attained at ∼30 s of discharge, from wall sputtered carbon transported to the 10 cm long tungsten divertor region. Tungsten remains exposed to the plasma, but the evolved surface composition varies with different C/D ratios. Tungsten is primarily sputtered from the mixed surface by impinging carbon ions in the +1 to +4 charge states, with some self-sputtering. Redeposition of sputtered tungsten to the divertor is significant, ∼80% along the higher plasma temperature attached plasma SAS entrance region, but this is less than the typically near-unity values for a conventional divertor. Plasma-incident carbon is highly backscattered (∼50%) from the mixed surface, with little redeposition (<10%); this helps maintain tungsten in the surface sputter zone. Carbon is mainly sputtered from the mixed surface by D + ions, also with low redeposition (∼10%–30%). Finally, the modeling shows non-zero but low sputtered tungsten current from the divertor to the core plasma direction. These results appear favorable for effective testing of a tungsten-containing SAS divertor in DIII-D, and extrapolation of mixed-material evolution/response findings to the analogous low- Z /high- Z , Be/W, ITER plasma facing system.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2026

Equivalent equilibrium ion distributions in ion sources and beams

Ion sources and ion beams often contain ions of more than one charge-to-mass ratio, due to the presence of multiple ionization states and/or multiple atomic and molecular ion species in the source. We show that, under certain conditions, analysis of these systems can be simplified using the notion of “equivalent equilibrium ion distributions” (EEIDs). These distributions have identical ion trajectories, space-charge distributions, and electric-field distributions, but can be composed of ion species with arbitrary charge-to-mass ratios. We use this result to obtain multi-species generalizations for the perveance of an ion diode, which relates the diode voltage to the extracted beam current, and for the perveance of a drifting ion beam, which determines the axial length-scale for beam expansion due to the self-electric field. Applied to a quasi-neutral plasma ion source containing cold ions and hot electrons, we find that the location of the beam-plasma interface (meniscus), where ions are extracted from the plasma, depends on the electron density and ion energy per unit charge at the interface, independent of the ion composition. For certain types of numerical simulations, EEIDs allow one to calculate the beam optics of an intense multi-species ion source by doing a simulation for a single ion species with an artificial charge-to-mass ratio chosen to minimize computation time. We illustrate these results using the 3D particle-in-cell, finite-element code Aleph. The simulations show how ions in a plasma source self-consistently accelerate to the supersonic speed needed for steady, radially expanding flow. Multi-species equilibria are subject to streaming instabilities because, while the different species have the same kinetic energy per unit charge, their velocities scale with the square root of the charge-to-mass ratio. The simulations show that a strong ion streaming instability can occur in a multi-species plasma ion source.

74 ATOMIC AND MOLECULAR PHYSICS↗

DOE OSTI2020

The Role of Protons and Hydrides in the Catalytic Hydrogenolysis of Guaiacol at the Ruthenium Nanoparticle-water Interface

The mechanistic roles of free hydronium ions, surface hydrides, and interfacial protons during guaiacol hydrodeoxygenation (HDO) on ruthenium nanoparticles are established. As guaiacol adsorbs on Ru, it loses its strong aromaticity and undergoes a rapid H-shift from its hydroxyl to meta carbons (in relation to its hydroxyl group), leading enol and keto surface isomers to exist in chemical equilibrium. HDO occurs via a hydridic H-adatom (H*) attack to the enol, followed by a kinetically relevant C-O bond rupture step, during which water shuttles the hydroxyl proton, enabling its intramolecular attack to the methoxy, evolving a high charged [Ru(s)-(C6H5O-)…(H+)…OCH3]† transition state. The competing HYD begins with a rapid H* attack to the keto, before a second, kinetically relevant H* attack, without proton involvement. Water, despite shifting the thermodynamics towards the more polar surface keto, promotes HDO to a much greater extent than HYD, because of its dual catalytic roles—it mobilizes hydroxyl proton (Brønsted acid) to cleave the strong C-O bond, synchronizing with the Ru metal surface (base) function that stabilizes the resulting [Ru(s)-(C6H5O-)…(H+)…OCH3]† transition state, and the water layers solvate this charged transition state, further reducing its free energy. Free hydronium ions do catalyze a separate homogeneous enol-keto isomerization, but this reaction is kinetically unrelated to HDO catalysis. This mechanistic picture explains the strong effects of polar protic solvent in hydrodeoxygenation, highlighting (i) the requirements of surface hydrides and interfacial protons acting in tandem to complete a HDO turnover and (ii) the cooperative role of protic solvent and metal surface in breaking the aromaticity and stabilizing charged reactive precursors and transition states.

Shangguan, Junnan↗

DOE OSTI2021

Elucidating and Mitigating High-Voltage Degradation Cascades in Cobalt-Free LiNiO 2 Lithium-Ion Battery Cathodes

LiNiO 2 (LNO) is a promising cathode material for next-generation Li-ion batteries due to its exceptionally high capacity and cobalt-free composition that enables more sustainable and ethical large-scale manufacturing. However, its poor cycle life at high operating voltages over 4.1 V impedes its practical use, thus motivating efforts to elucidate and mitigate LiNiO 2 degradation mechanisms at high states of charge. Here, a multiscale exploration of high-voltage degradation cascades associated with oxygen stacking chemistry in cobalt-free LiNiO 2 , is presented. In this work, lattice oxygen loss is found to play a critical role in the local O3–O1 stacking transition at high states of charge, which subsequently leads to Ni-ion migration and irreversible stacking faults during cycling. This undesirable atomic-scale structural evolution accelerates microscale electrochemical creep, cracking, and even bending of layers, ultimately resulting in macroscopic mechanical degradation of LNO particles. By employing a graphene-based hermetic surface coating, oxygen loss is attenuated in LNO at high states of charge, which suppresses the initiation of the degradation cascade and thus substantially improves the high-voltage capacity retention of LNO. Overall, this study provides mechanistic insight into the high-voltage degradation of LNO, which will inform ongoing efforts to employ cobalt-free cathodes in Li-ion battery technology.

25 ENERGY STORAGE↗

DOE OSTI2021

High-efficiency perovskite photovoltaic modules achieved via cesium doping

Perovskite solar modules have been attracting increasing attention due to their market potential, yet publications concerned with theintrinsic scale-up potential of different perovskite compositions remain relatively scarce. On the other hand, while great success is being made towards improving the power conversion efficiency (PCE) of perovskite solar cells (PSCs) by cesium cation (Cs + ) doping of the perovskite, more attention is being paid to the perovskite phase stabilization effect of Cs + doping, and less to other properties that are critical to understand and futher improve the PSC's. In this work, moderately-Cs-doped MAPbI 3 was employed as a model perovskite material in order to exclude the phase stabilization effect. Our systematic study revealed the influence of Cs + in organic-inorganic hybrid perovskites on the crystal structure, crystallization process, trap state density, band structure and charge (i.e., ions or photo-carriers) transport. Markedly, it has been observed that Cs + doping can greatly increase the carrier diffusion length in the perovskite films, thus improving the potential to scale-up PSC's.The PCE of small area devices (0.09 cm 2 ) was increased to 21.72% from 19.73%, with decreased hysteresis behavior and increased operational stability (T85 = 1000 h) after Cs + doped, where T85 refers to the retention of 85% of the initial PCE. Moreover, a PCE of 21.08% was obtained for a Cs + -containing perovskite module with an active area > 30 cm 2 , which demonstrates a better "reproducibility" than the reference sample (MAPbI3-based perovskite modules, PCE = 18.26%).

14 SOLAR ENERGY↗

DOE OSTI2021

Particle transport constraints via Bayesian spectral fitting of multiple atomic lines

Optimized operation of fusion devices demands detailed understanding of plasma transport, a problem that must be addressed with advances in both measurement and data analysis techniques. In this work, we adopt Bayesian inference methods to determine experimental particle transport, leveraging opportunities from high-resolution He-like ion spectra in a tokamak plasma. The Bayesian spectral fitting code is used to analyze resonance (w), forbidden (z), intercombination (x, y), and satellite (k, j) lines of He-like Ca following laser blow-off injections on Alcator C-Mod. This offers powerful transport constraints since these lines depend differently on electron temperature and density, but also differ in their relation to Li-like, He-like, and H-like ion densities, often the dominant Ca charge states over most of the C-Mod plasma radius. Using synthetic diagnostics based on the AURORA package, we demonstrate improved effectiveness of impurity transport inferences when spectroscopic data from a progressively larger number of lines are included.

47 OTHER INSTRUMENTATION↗

DOE OSTI2021

Modeling of particle transport, neutrals and radiation in magnetically-confined plasmas with Aurora

In this work, we present Aurora, an open-source package for particle transport, neutrals and radiation modeling in magnetic confinement fusion plasmas. Aurora's modern multi-language interface enables simulations of 1.5D impurity transport within high-performance computing frameworks, particularly for the inference of particle transport coefficients. A user-friendly Python library allows simple interaction with atomic rates from the Atomic Data and Atomic Structure database as well as other sources. This enables a range of radiation predictions, both for power balance and spectroscopic analysis. We discuss here the superstaging approximation for complex ions, as a way to group charge states and reduce computational cost, demonstrating its wide applicability within the Aurora forward model and beyond. Aurora also facilitates neutral particle analysis, both from experimental spectroscopic data and other simulation codes. Leveraging Aurora's capabilities to interface SOLPS-ITER results, we demonstrate that charge exchange is unlikely to affect the total radiated power from the ITER core during high performance operation. Finally, we describe the ImpRad module in the one modeling framework for integrated task framework, developed to enable experimental analysis and transport inferences on multiple devices using Aurora.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2024

Beam Scattering Through Foil at NSRL

In this note, we describe the foil structure that is used in the NASA Space Radiation Laboratory (NSRL) transport line just before D6 septum magnet. Foils of different materials and thickness are used through which different ion species at different energies pass. Foil removes the electrons from the incoming ions and make it fully stripped (or partially stripped is also possible). Further, when charged particles pass through a foil, the outgoing particles form a Gaussian like angular distribution. This Gaussian like distribution passes through a set of octupole magnets creates a uniform beam distribution at the NSRL target which is required for various beam experiments. We utilize the Bmad and SRIM packages to calculate the energy loss through the foils for various ion species at different energies and charge states. Finally, we provide a summary of the energy loss calculations through the foils using these two different methods.

43 PARTICLE ACCELERATORS↗

DOE OSTI2021

Particle transport constraints via Bayesian spectral fitting of multiple atomic lines

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2024

First-principles study of the structures and redox mechanisms of Ni-rich lithium nickel manganese cobalt oxides

To reduce the cobalt (Co) content in lithium-ion batteries, Ni-rich (high-Ni) lithium nickel manganese cobalt oxides (NMC) are pursued as one of the next-generation cathode materials. However, there is still debate on the crystal and electronic structures of the baseline, LiNiO 2 . Density Functional Theory (DFT) calculations were performed to provide a theoretical understanding of Ni-rich NMC. First, it was found that the commonly used $R\bar{3}m$ structure for LiNiO 2 is metallic, contrary to the experimentally reported mix-conducting behavior. Among the four different space groups, $R\bar{3}m$, C2/m, P2 1 /c, and P2/c, P2/c with charge disproportionation of Ni 2+ and Ni 4+ is the most energetically stable and semiconducting structure of LiNiO 2 . Therefore, the atomic structures of representative Ni-rich NMC were built by partially replacing Ni with Co or Mn in the P2/c LiNiO 2 to form Li x Ni y Mn z Co 1-y-z O 2 . In the fully lithiated (x=1.0) high Ni content NMC (y>0.5), the oxidation state of all Mn ions becomes 4+, while Co ions still maintain 3+, and part of the Ni ions become 3+ to compensate for the charge. Upon delithiation, the local environment shows more variation of the charge states on the transition metal (TM) ions. The average oxidation on each TM follows a sequence of losing electrons that starts from Ni 2+ to Ni 3+ , then oxidizing Ni 3+ and Co 3+ , while Mn 4+ remains electrochemically inactive till x=0. Finally, a general relationship for the oxidation state change in each TM as a function of x is derived and shows agreement with both modeling and experimental data.

25 ENERGY STORAGE↗

DOE OSTI2026

Improvements to Stripping Foils in BTA

To achieve the desired charge state in the Alternating Gradient Synchrotron (AGS), there is a stripping foil in the Booster to AGS (BtA) transfer line. For light ions, such as p, d, and h, they are already fully stripped in the Booster, or ions such as O have few electrons to be stripped off, and a thin foil of aluminum is used. For medium weight ions, such as Zr and Ru, they use what foils are available which have been optimized for heavy and light ions at 100 MeV/u. This worked well in the Zr case which achieved a measured stripping efficiency of 87%, contrary to the Ru case which achieved a measured stripping efficiency of 63%. For the EIC early science, Ag is currently intended to be the first ion. Using our existing foils, this would, at best, yield a helium-like charge state with a theoretical stripping efficiency of 50%. To improve on this, two foils of Ti or Nb have been selected to provide optimal stripping efficiency of Ag, and other energetic medium ions, which can reach 90% efficiency to fully strip the Ag ions. For heavy ions, the Al+C or Al+Ni stripping foils (sandwich foils) are used to produce helium-like charge states. For high intensity operation of Au, the Al foil nears its melting point and, in some cases, has been severely damaged. To maximize foil lifetime, there is a maximum intensity per unit time in BTA dependent on the Booster and AGS timing configurations. To mitigate the risk of melting the Al, replacement foils that use Ti, Nb, or anodized Al have been evaluated for their improved thermal qualities. At the selected thicknesses, each foil has equivalent charge distributions before entering the C foil, and should provide the same stripping efficiency through the entire sandwich.

43 PARTICLE ACCELERATORS↗

DOE OSTI2020

Leveraging Cell Expansion Sensing in State of Charge Estimation: Practical Considerations

Measurements such as current and terminal voltage that are typically used to determine the battery’s state of charge (SOC) are augmented with measured force associated with electrode expansion as the lithium intercalates in its structure. The combination of the sensed behavior is shown to improve SOC estimation even for the lithium ion iron phosphate (LFP) chemistry, where the voltage–SOC relation is flat (low slope) making SOC estimation using measured voltage difficult. For the LFP cells, the measured force has a non-monotonic F–SOC relationship. This presents a challenge for estimation as multiple force values can correspond to the same SOC. The traditional linear quadratic estimator can be driven to an incorrect SOC value. To address these difficulties, a novel switching estimation gain is used based on determining the operating region that corresponds to the actual SOC. Moreover, a drift in the measured force associated with a shift of the cell SOC–expansion behavior over time is addressed with a bias estimator for the force signal. The performance of Voltage-based (V) and Voltage and Force-based (V&F) SOC estimation algorithms are then compared and evaluated against a desired ±5% absolute error bound of the SOC using a dynamic stress test current protocol that tests the proposed estimation scheme across wide range of SOC and current rates.

25 ENERGY STORAGE↗

DOE OSTI2021

Experimental studies on photoabsorption by endohedral fullerene ions with a focus on Xe@C 60 + confinement resonances

A brief overview on the status of experimental investigations into photoionization and fragmentation of fullerenes and endohedral fullerenes by absorption of a single short-wavelength photon is presented. The focus of this paper is on the endohedral Xe@C 60 + molecular ion in which a xenon atom is centrally encapsulated inside a C$^{+}_{60}$ fullerene cage. Confinement resonances that result from the interference of Xe photoelectron matter waves emerging from the C$^{+}_{60}$ cavity were studied by exposing Xe@C 60 + ions to synchrotron radiation of 60 to 150 eV energy which is the region of the well-known giant atomic Xe 4d excitation resonance. Photoions Xe@C n q+ (with final charge states q = 2,3,4 of the product ions and numbers of carbon atoms left in the cage) were recorded as a function of photon energy and cross sections for the individual reaction channels were determined. In addition to previous work, new final channels (q = 2; n = 60, 58 and q = 4; n = 58, 56) were observed, and thus, about 70% of the oscillator strength expected for the encapsulated Xe atom in the investigated energy range could be recovered. The present results establish the first and, so far, only conclusive experimental observation of confinement resonances in an endohedral fullerene. The data are in remarkable agreement with relativistic R-matrix calculations that accompanied the previous experimental work.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Spray Mechanism of Contained-Electrospray Ionization

Analytical characteristics of contained electrospray ionization (ESI) are summarized in terms of its potential to modify the analyte solution during the stages of droplet formation to provide opportunities to generate native versus denatured biomolecular gas-phase ions, without the need for bulk-phase analyte modifications. The real-time modification of the charged microdroplets occurs in a cavity that is included in the outlet of the contained-ESI ion source. Close examination of the inside of the cavity using a high-speed camera revealed the formation of discrete droplets as well as thin liquid films in the droplets wake. When operated at 20 psi N2 pressure, the droplets were observed to move at an average speed of 8 mm/s providing ~1 s mixing time in a 10 mm cavity length. Evidence is provided for the presence of highly reactive charged droplets based on myoglobin charge state distribution, apo-myoglobin contents, and ion mobility drift time profiles under different spray conditions. Mechanistic insights for the capture of vapor-phase reagents and droplet dynamics as influenced by different operational modes are also described.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Voltage Mining for (De)lithiation-Stabilized Cathodes and a Machine Learning Model for Li-Ion Cathode Voltage

Advances in lithium-metal anodes have inspired interest in discovery of Li-free cathodes, most of which are natively found in their charged state. This is in contrast to today's commercial lithium-ion battery cathodes, which are more stable in their discharged state. In this study, we combine calculated cathode voltage information from both categories of cathode materials, covering 5577 and 2423 total unique structure pairs, respectively. The resulting voltage distributions with respect to the redox pairs and anion types for both classes of compounds emphasize design principles for high-voltage cathodes, which favor later Period 4 transition metals in their higher oxidation states and more electronegative anions like fluorine or polyanion groups. Generally, cathodes that are found in their charged, delithiated state are shown to exhibit voltages lower than those that are most stable in their lithiated state, in agreement with thermodynamic expectations. Deviations from this trend are found to originate from different anion distributions between redox pairs. In addition, a machine learning model for voltage prediction based on chemical formulas is trained and shows state-of-the-art performance when compared to two established composition-based ML models for material properties predictions, Roost and CrabNet.

25 ENERGY STORAGE↗