Search NASA⌕ Search

SEARCH · Search NASA

Results for “ionic association”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Penetration of Fission Products Ions into Complex Solids and the Effect of Ionic Wash Methods

During washing of radiologically impacted building surfaces, penetration of radionuclide ions into complex solids associated with these surfaces may occur. This study investigates the penetration of Cs-137, Sr-85, and Eu-152 solutions into numerous common building materials and radionuclide behavior when these materials were exposed to a static bath or low-pressure flow of tap water, 0.1 M potassium chloride (KCl), and 0.5 M KCl. The decontamination efficacy and the depth profile for residual contamination were measured to determine the conditions under which applying a wash solution has benefit compared to physically removing the surface material. On asphalt, 70-80% of the radionuclides were found to be within 0.02 mm of the surface. Concrete is more porous than asphalt, and 80% of the radionuclides were within 0.2 mm of the surface for Cs-137 and Eu-152 and 50-80% for Sr-85. Water effectively removed all contaminants from hard nonporous surfaces. Finally, this paper illustrates that a wash penalty factor concept-defined as ratio of the depth at which 50% of the radioactivity is found in the washed sample divided by the depth at which 50% of radioactivity is found in the control-can serve as a way to quantify whether the wash method increases the depth at which contamination penetrates into the material and thus the material becomes more difficult to decontaminate.

building materials↗
DOE OSTI2025

Yttrium Contenting Compositionally Complex Medium-Entropy Li-Garnet Electrolyte with Improved Ionic Conductivity

The compositionally complex medium/high-entropy design concept can greatly expand the categories and affect the properties of the materials. With such a designing concept, a medium-entropy Li-garnet electrolyte with appropriate yttrium content (formula Li 6.6 La 3 ZrNb 0.3 Ta 0.3 Hf 0.3 Y 0.1 O 12 ) shows a record-high ionic conductivity of ∼5.7 × 10 –4 S/cm, the highest reported for any single-site substituted high/medium-entropy Li-garnet. The assembled Li metal symmetric cells also show stable long-term cycling (0.1 mA/cm 2 for over 200 h). Neutron powder diffraction and Rietveld refinement results indicate that a competing conduction mechanism between (1) occupancy on high mobility of 96h sites and (2) the associated site vacancies and the bond length requires an appropriate content of Y for enhanced ionic conductivity. Li-ion hopping through the bottleneck can also contribute to the conductivity. Finally, density functional theory and Born–Oppenheimer molecular dynamics simulations also indicate the high mobility and number of hopping transitions of Li ions, contributing to the high ionic conductivity.

Li-garnet↗
DOE OSTI2025

Expanded View of NMR Spin–Lattice Relaxation in Fluorine-Containing Ionic Liquids

Fluorine-containing anions are widely used in ionic liquids due to their unique physicochemical properties. However, the local dynamics of both cations and anions and their associated relaxation mechanisms remain incompletely understood. Here, we present a 1 H and 19 F spin–lattice relaxation rate (R1) study as a function of frequency over a broad frequency range from 30 kHz to 800 MHz for ionic liquids containing BF 4 – , PF 6 – , TFSI – , and FSI – anions and EMIM + cation. By combining experimental R 1 H and R 1 F NMR dispersion (NMRD) profiles with relaxation models for both dipolar spin interactions and chemical shift anisotropy (CSA) contributions, we demonstrate that CSA is needed to accurately describe the R 1 F relaxation behavior above ∼300 MHz, the extent of which depends on the anion structure. These findings challenge the long-standing assumption that dipolar contribution is the main source of 19 F relaxation in these systems and highlight the importance of including CSA to accurately interpret 19 F relaxation in ionic liquids, particularly at high frequencies. This work provides new insights into the molecular dynamics of fluorine-containing species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Understanding resistances in capacitive deionization devices

The desalination characteristics of capacitive deionization (CDI) are significantly impacted by the cell resistance. Here we apply electrochemical impedance spectroscopy (EIS) to analyze the resistive properties of a CDI device, which include EIS measurements on a complete assembled cell (in two wire mode) and EIS measurements with additional contacts to decouple electrode/electrolyte and contact impedances (four wire mode). These measurements shed light on the interface between current collector and electrode as well as the internal capacitive and resistive elements of the cell. With two-wire and four-wire EIS measurements, we find that the often observed high-frequency arc(s) in the impedance spectra can be due to contact effects and/or an internal ionic-transfer resistance that is locally in parallel with macropore wall capacitance. In some cases, the two associated arcs in the Nyquist plot are overlapping and present simultaneously, making their identification in the EIS spectra difficult unless both two-wire and four-wire measurements are made. Despite causing a large high-frequency arc in the Nyquist plot, we find that the apparent internal ionic-transfer resistance is negligible compared to the resistances of the electrode, separator, and external electronic components. Here, an investigation of the contact impedance between the electrode and current collector reveals a parallel RC arc that can grow over time if an improper material is used (e.g., titanium). In our system, the electrode ionic resistance dominates the total Ohmic power dissipation, which has implications for scale-up of CDI systems and future improvements of cell design.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Imaging and speciation of intracellular metallic implant debris using synchrotron-based X-ray fluorescence micro-spectroscopy: a study of two cases

Debris generated from total hip arthroplasty (THA) components made from metal alloys can cause, in some cases, inflammatory cell (e.g., macrophages) responses that lead to adverse local tissue reactions (ALTR) and implant failure. The lack of information on intracellular chemical alterations of metal debris has hindered the understanding of the pathogenesis of ALTR. The goal of this study was to characterize intracellular debris within macrophages using Synchrotron imaging and spectroscopy. We studied periprosthetic tissues of two retrieved THAs with (1) a metal-on-metal (MoM) articulation and (2) a metal-on-polyethylene (MoP) articulation exhibiting corrosion of the metal femoral head. The MoM-THA exhibited different valence states of chromium- and cobalt-containing debris, suggesting three different moieties: Cr 2 O 3 , CrPO 4 , and an alloy-oxide mixture. The findings further suggest that Cr 2 O 3 formed in the tribological interfaces of the implant, while CrPO 4 is a by-product of the phagocytosis process of cobalt alloy-containing debris. Titanium debris appeared to occur in a mixed crystalline/amorphous oxide state. It remains unclear if this chemical state results from the tribochemical processes at the implant surface or intracellular alterations. The MoP-THA specimen exhibited no intracellular particulate debris associated with macrohpages, indicating that the ALTR may be entirely triggered by metal ionic species in this case. A better understanding of in vivo chemical alteration of implant debris will aid in assessing the risk for ALTR during implant design and material choice. However, various techniques are needed to accurately determine the interaction between metal particles and the inta- and extra-cellular environment.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2020

Ice Nucleating Particles, Aerosols and Clouds over the Higher Latitude Southern Ocean

Improved understanding of aerosol-cloud-precipitation interactions is a key goal of the DOE-ASR program. Ice Nucleating Particles (INPs) are rare aerosol particles that trigger ice formation in clouds. By doing so they may initiate precipitation in clouds, and this impacts cloud lifetime. Nowhere may the role of INPs be manifested so dramatically as in the Southern Ocean (SO). This vast region was the focus of the DOE-ARM MARCUS (Measurement of Aerosols, Radiation and CloUds over the Southern Oceans) and MICRE (Macquarie Island Cloud and Radiation Experiment) campaigns. In the SO, a deficit of INPs has been a leading hypothesis for why liquid clouds persist, which underlays the bias of global climate models in predicting excess shortwave radiation reaching the ocean surface between 55°S and Antarctica. In this study, we used the 6-month acquisition of INP data on four MARCUS cruises from Hobart, Tasmania, to Antarctica, and the single-location full annual INP cycle observed in MICRE, to gain a holistic, quantitative picture of the INP number concentrations as a function of temperature and their variability over SO latitudes from 43°S to Antarctica. Augmenting initial processing of filter collections of aerosol particles during MARCUS and MICRE, additional freezing studies following thermal treatment (to removes INPs associated with microbes) and peroxide treatment (to remove all organics), as well as ionic chemistry and total organic carbon analysis, were applied to samples to improve time and space resolution, and differentiate marine from terrestrial contributions. We also performed Next Generation Sequencing to determine that bacterial composition can tag periods of enhanced and degraded marine organic INPs and the relative lack of occurrence of land-sourced bio-particles. Through these and other analyses, INP data were categorized into representative source types (e.g., marine versus terrestrially-influenced). The products of our analyses are being used to parameterize ice formation for use in numerical modeling studies to determine if, and when, ocean-derived INPs control the microphysical composition and radiative balance of SO clouds in a manner not presently captured by global models. The specific objectives and approaches proposed were largely accomplished, including: 1) Additional and value-added chemical and biological analyses of archived samples of aerosols were completed to categorize and quantify INP types and concentrations over the SO. 2) Analyses were completed to place INP data in meteorological and aerosol context. 3) Sea spray aerosol INPs were demonstrated to dominate the SO region in all but episodic events. 4) New parameterizations for INP sources relevant to the SO were constructed. 5) Collaborative modeling studies demonstrating the crucial role of INPs in determining cloud radiative and precipitation properties were conducted with MARCUS and MICRE partners. Collaborative publication submissions in this regard ensued within the two year study. This work will advance the science of interactions of aerosols, clouds and precipitation, to improve their representation in regional and global climate models. Results have informed representation of primary ice crystal nucleation, give inference to the role of secondary processes, and improve investigations of aerosol influences on clouds via ice nucleation over SO high latitudes and similar vast ocean regions. Application will improve representation of such interactions for clouds in both regional and global climate models. The data base and analyses methods applied will continue to serve research studies in the future.

58 GEOSCIENCES↗
DOE OSTI2022

Thermodynamic modeling of aqueous lithium salt solutions with association electrolyte nonrandom two-liquid activity coefficient model

The high charge density of lithium ion and the resulting strong association phenomena make thermodynamic modeling of aqueous lithium electrolyte solutions extremely challenging. In this study, the association electrolyte nonrandom two-liquid activity coefficient model of Lin et al. (AIChE J. 2022, 68(2), e17422) is utilized to correlate and predict thermodynamic properties and solubility behavior of aqueous single electrolyte solutions of LiCl, LiBr, LiI, and LiNO 3 , and their mixed electrolyte solutions. Capturing self-association of water, cross-association of ion and water for hydration, and cross-association of cation and anion for ion-pairing, the association model accurately represents the literature experimental data up to saturation concentrations and at the temperature ranging from 263 K to 523 K. Here, this study further investigated the effect of anions of the lithium salts, and re-confirmed that the order of solution non-ideality as LiI > LiBr > LiCl > LiNO 3 because the anions with stronger association strengths are more likely to form ion pairs and thus lower the mean ionic activity coefficients.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Anharmonic lattice dynamics and superionic transition in AgCrSe 2

Intrinsically low lattice thermal conductivity ( κ l a t ) in superionic conductors is of great interest for energy conversion applications in thermoelectrics. Yet, the complex atomic dynamics leading to superionicity and ultralow thermal conductivity remain poorly understood. Here, we report a comprehensive study of the lattice dynamics and superionic diffusion in A g C r S e 2 from energy- and momentum-resolved neutron and X-ray scattering techniques, combined with first-principles calculations. Our results settle unresolved questions about the lattice dynamics and thermal conduction mechanism in A g C r S e 2 . We find that the heat-carrying long-wavelength transverse acoustic (TA) phonons coexist with the ultrafast diffusion of Ag ions in the superionic phase, while the short-wavelength nondispersive TA phonons break down. Strong scattering of phonon quasiparticles by anharmonicity and Ag disorder are the origin of intrinsically low κ l a t . The breakdown of short-wavelength TA phonons is directly related to the Ag diffusion, with the vibrational spectral weight associated to Ag oscillations evolving into stochastic decaying fluctuations. Furthermore, the origin of fast ionic diffusion is shown to arise from extended flat basins in the energy landscape and collective hopping behavior facilitated by strong repulsion between Ag ions. These results provide fundamental insights into the complex atomic dynamics of superionic conductors.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Ferri-ionic coupling in Cu In P 2 S 6 nanoflakes: Polarization states and controllable negative capacitance

We consider nanoflakes of van der Waals ferrielectric Cu In P 2 S 6 covered by an ionic surface charge and reveal the appearance of polar states with a relatively large polarization of approximately 5 µC/ cm 2 and stored free charge of around 10 µC/ cm 2 , which can mimic “midgap” states associated with a surface-field-induced transfer of Cu and/or In ions in the van der Waals gap. The change in the ionic screening degree and mismatch strains induce a broad range of the transitions between paraelectric phase, antiferroelectric, ferrielectric, and ferri-ionic states in Cu In P 2 S 6 nanoflakes. The states’ stability and/or metastability is determined by the minimum of the system free energy consisting of electrostatic energy, elastic energy, and a Landau-type four-well potential of the ferrielectric dipole polarization. The possibility of governing the transitions by strain and ionic screening can be useful for controlling the tunneling barrier in thin-film devices based on Cu In P 2 S 6 nanoflakes. Additionally, we predict that the Cu In P 2 S 6 nanoflakes reveal features of the controllable negative capacitance effect, which make them attractive for advanced electronic devices, such as nanocapacitors and gate oxide nanomaterials with reduced heat generation. Published by the American Physical Society 2024

Physics↗
DOE OSTI2025

Influence of Grafting Density and the Ionic Environment on the Structure of Zwitterionic Brushes

Zwitterionic polymer brushes possess a high potential for applications as surface coatings, e.g., in antifouling applications. Their complex association behavior due to the coexistence of oppositely charged groups on the same monomeric unit allows for a broad variation of polarity, hydrophilicity, and the antipolyelectrolyte effect with the variation of the surrounding environment. In this study, planar polysulfobetaine brushes were investigated with neutron reflectometry (NR) and neutron spin–echo spectroscopy under grazing incidence (GINSES) to explore the brush structure and its inner dynamics perpendicular to the substrate. In particular, the effects of the substrate–initiator system and ionic strength on the structure were investigated with neutron reflectometry and a swelling by a factor of 3–5 was found in the presence of aqueous NaCl and MgCl 2 solutions compared to the dry state. During the data analysis, the applicability of a model-free evaluation was also demonstrated for the investigated polysulfobetaine brushes. Furthermore, it was found with GINSES that in contrast to neutral brushes, these polysulfobetaine brushes do not show the typical concentration fluctuations in the nanosecond time range when partially swollen with salt-free water.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Transition Metal Dissolution Mechanisms and Impacts on Electronic Conductivity in Composite LiNi 0.5 Mn 1.5 O 4 Cathode Films

The high-voltage LiNi 0.5 Mn 1.5 O 4 (LNMO) spinel cathode material offers high energy density storage capabilities without the use of costly Co that is prevalent in other Li-ion battery chemistries (e.g., LiNi x Mn y Co z O 2 (NMC)). Unfortunately, LNMO-containing batteries suffer from poor cycling performance because of the intrinsically coupled processes of electrolyte oxidation and transition metal dissolution that occurs at high voltage. In this work, we use operando electron paramagnetic resonance (EPR) and nuclear magnetic resonance (NMR) spectroscopies to demonstrate that transition metal dissolution in LNMO is tightly coupled to HF formation (and thus, electrolyte oxidation reactions as detected with operando and in situ solution NMR), indicative of an acid-driven disproportionation reaction that occurs during delithiation (i.e., battery charging). Leveraging the temporal resolution (s-min) of magnetic resonance, we find that the LNMO particles accelerate the rate of LiPF 6 decomposition and subsequent Mn 2+ dissolution, possibly due to the acidic nature of terminal Mn-OH groups. X-ray photoemission electron microscopy (XPEEM) provides surface-sensitive and localized X-ray absorption spectroscopy (XAS) measurements, in addition to X-ray photoelectron spectroscopy (XPS), that indicate disproportionation is enabled by surface reconstruction upon charging, which leads to surface Mn 3+ sites on the LNMO particle surface that can disproportionate into Mn 2+ (dissolved) and Mn 4+ (s) . During discharge of the battery, we observe high quantities of metal fluorides (in particular, MnF 2 ) in the cathode electrolyte interphase (CEI) on LNMO as well as the conductive carbon additives in the composite. Electronic conductivity measurements indicate that the MnF 2 decreases film conductivity by threefold compared to LiF, suggesting that this CEI component may impede both the ionic and electronic properties of the cathode. Ultimately, to prevent transition metal dissolution and the associated side reactions in spinel-type cathodes (particularly those that operate at high voltages like LNMO), the use of electrolytes that offer improved anodic stability and prevent acid byproducts will likely be necessary.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Systematic observations of enhanced oil recovery and associated changes at carbonate-brine and carbonate-petroleum interfaces

Enhanced oil recovery (EOR) from carbonates is obtained by injection of controlled ionic strength brines containing “active ions” (e.g., SO 4 2- , Mg 2+ , Ca 2+ ). It is generally believed that this occurs through the interaction of the active ions at the carbonate-brine interface (e.g., within a thin brine layer separating the petroleum and the carbonate phases). Here, in-situ observations show how one active ion, SO 4 2- , alters behavior at the carbonate-petroleum interface. Displacement of petroleum from initially oil-wet carbonate rocks using brines with variable SO 4 concentrations systematically changes oil recovery, in situ contact angles, and connectivity of the oil phase, confirming that the active ion alters interactions at the oil/brine/carbonate interface, as expected. Measurements of model calcite-fluid interfaces show that there is no measurable sorption of SO 4 to carbonate-brine interfaces but reveals that the carbonate-petroleum interface is altered by previous exposure to SO 4 -containing brines. These results suggest that EOR in carbonates is controlled indirectly by active ions. We propose that this may be due to a reduced oleophilicity of the carbonate caused by chemical complexation between the active ion and petroleum’s acidic and basic functional groups. This mechanism explains how both anions and cations act as active ions for EOR in carbonates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Cryo-EM structures of the ABCA4 importer reveal mechanisms underlying substrate binding and Stargardt disease

ABCA4 is an ATP-binding cassette (ABC) transporter that flips N-retinylidene-phosphatidylethanolamine (N-Ret-PE) from the lumen to the cytoplasmic leaflet of photoreceptor membranes. Loss-of-function mutations cause Stargardt disease (STGD1), a macular dystrophy associated with severe vision loss. To define the mechanisms underlying substrate binding and STGD1, we determine the cryo-EM structure of ABCA4 in its substrate-free and bound states. The two structures are similar and delineate an elongated protein with the two transmembrane domains (TMD) forming an outward facing conformation, extended and twisted exocytoplasmic domains (ECD), and closely opposed nucleotide binding domains. N-Ret-PE is wedged between the two TMDs and a loop from ECD1 within the lumen leaflet consistent with a lateral access mechanism and is stabilized through hydrophobic and ionic interactions with residues from the TMDs and ECDs. Our studies provide a framework for further elucidating the molecular mechanism associated with lipid transport and disease and developing promising disease interventions.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Synthesis of imidazolium-mediated Poly(benzoxazole) Ionene and composites with ionic liquids as advanced gas separation membranes

We report thermally rearranged (TR) polymers and ionic polymers are two material classes which have been employed in leading gas separation membranes. This work introduces a novel approach of combining the benzoxazole functionality associated with TR polymers with tailorable cationic groups, yielding a new type of imidazolium-mediated poly(benzoxazole) ionene polymer, “Im-PBO-Ionene” with the aim of enhanced CO 2 separation performance. The structural changes exhibited from the Coulombic interactions between the ionene backbone and the “free” ionic liquid (IL) resulted in enhanced gas separation performance, shown in fundamental characterizations, observed through increased diffusivities and more notably, retained high selectivities and 3x or 5x respective increases in CO 2 permeability upon the addition of 1 or 2 equivalents of IL per polymer repeat unit. These new high-performance ionenes demonstrate the versatility of ionene design and potential of the ionene + IL material platform for gas separation membranes with versatile incorporation of sophisticated functional and structural features.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Structure and dynamics of ILs-based gel polymer electrolytes and its enhanced conductive properties with the incorporation of Al 2 O 3 nanofibers

Here, this work reports the enhanced mobility of ions in ionic liquid (IL)-based gel polymer electrolytes (GPEs) with the incorporation of Al 2 O 3 nanofibers. A combination of PVDF-HFP, EMIMTFSI and LiTFSI with 3 wt% Al 2 O 3 nanofibers has been prepared through solution casting technique. The room temperature ionic conductivity of PVDF-HFP: ILs electrolyte (45:55, weight ratio of 0.82) (GPE) is found to be 2.7 × 10 –5 S cm –1 , which increases up to 7.8 × 10 –5 S cm –1 in Al 2 O 3 containing GPE (Al-GPE). Pulsed field gradient (PFG) NMR results validate the increased ionic conductivity observed in Al-GPE. We found that the diffusivity of Li + , TFSI – and EMIM + increases when Al 2 O 3 nanofibers are well-distributed in the GPE matrix. The surface morphology and the amorphicity of GPEs are examined through SEM and XRD analyses. Lastly, the local structure of Al 2 O 3 fibers and the molecular-level interactions of ions with polymer, and their effect on the diffusivity of ions are established through solid-state NMR detecting 27 Al, 1 H, 13 C, 19 F nuclei including 2D 13 C{ 1 H} HETCOR NMR experiments. The 13 C DPMAS and CPMAS experiments highlight the dynamic heterogeneity associated with the ions that are embedded in the rigid and the mobile phase of GPEs. While some of the ionic species strongly interact with polymer chains in the rigid environment, the majority of them reside in the mobile phase and contribute to the overall increased conductivity. Most importantly, Al 2 O 3 nanofibers significantly affect the dynamics of ionic species that are present in the mobile phase between the polymer chains.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Illuminating the Photophysics of Oxygen Atom Transfer in Rare Earth Metal-Organic Complexes

Industrial separations of rare earth metals are reliant on selectivity based on ionic radii, which are time, energy, and resource consuming.1 The unique and discontinuous manifold of energy states associated with the f-electron configurations of the rare earth ions2 offer an opportunity to overcome some of these limitations by incorporating light into the separation process. Here, we use transient absorption spectroscopy to understand the differences in mechanism of light-initiated oxygen atom transfer (OAT) in yttrium (Y) and dysprosium (Dy) rare earth complexes. These metal-organic complexes are functionalized with hexfluoroacetyl-acetonate (hfac) and 4-methylmorpholine-N-oxide (NMMO). After light absorption in the presence of triphenyl phosphine (TPP), the NMMO in the Y-NMMO complex is replaced by the TPPO OAT reaction product. Because the Dy f-electron manifold is accessible to the ligand excited states, while there are no accessible states associated with f-electrons for Y, there are significant differences in reactivity. Transient absorption spectroscopy (TAS) was used to monitor changes after 340 nm photoexcitation of Dy/Y-NMMO or the product complex Dy/Y-TPPO. TAS is a pump-probe technique where a white light probe pulse is delayed relative to a visible pump pulse, which photoexcites a sample. Differences between the ground and excited states are monitored over time. With TAS, we access time scales from 100 fs-400 us to determine the photophysics of the complexes of interest. Photoexcitation of Y-NMMO (Fig. 1A) creates a broad photoinduced absorption (PIA) that evolves into a sharp positive feature over 4.2 ps centered at 450 nm. A secondary feature centered at 550 nm grows in with a 200 ps time constant and remains through the 5 ns time window of our experiment. Control experiments for Y-TPPO reveal that the feature at 450 nm is due to internal dynamics of the hfac ligand, while the 550 nm shoulder is due to the presence of the NMMO. Comparing kinetics at 550 nm for Y-NMMO and Dy-NMMO (Fig. 1B) shows that while Y exhibits a distinct growth in the NMMO feature, the Dy decays almost completely within 5 ns. Control experiments with Dy-TPPO prove that the ligand excited states centered on the hfac ligand are deactivated via energy transfer to the Dy manifold within 200 ps. This deactivation leads to significant differences in OAT reactivity between Y and Dy.

CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSICS↗
DOE OSTI2021

Heat generation in electric double layer capacitors with neat and diluted ionic liquid electrolytes under large potential window between 5 and 80 °C

Here, this study investigates the effect of temperature on the heat generation and the associated electrochemical phenomena occurring in IL-based EDLCs. The EDLCs consisted of two identical activated carbon electrodes with neat Pyr14TFSI or Pyr14TFSI diluted in propylene carbonate (PC) as electrolytes. The instantaneous heat generation rate at each electrode was measured by isothermal calorimetry between 5 and 80 °C under constant current cycling and potential window of 2.5 V. First, the instantaneous heat generation rate was similar at each electrode in neat IL. However, it was smaller at the negative electrode in diluted IL and featured endothermic dips growing with increasing temperature > 40 °C due to overscreening effects, ion desolvation, and/or decomposition of PC. The irreversible heat generation was similar in each half-cell and decreased with increasing temperature due to the reduction in internal resistance, particularly with neat IL. The irreversible heat generation exceeded Joule heating in all cases, especially at high temperature and low current. This was attributed to ion desorption and charge redistribution in the porous electrodes. Finally, the reversible heat generation for both electrolytes was larger at the positive than at the negative electrode due to the difference in anion and cation sizes.

25 ENERGY STORAGE↗