Search NASA⌕ Search

SEARCH · Search NASA

Results for “ionic liquid crystal”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Functionalization of Cathode–Electrolyte Interface with Ionic Liquids for High-Performance Quasi-Solid-State Lithium–Sulfur Batteries: A Low-Sulfur Loading Study

We introduce a quasi-solid-state electrolyte lithium-sulfur (Li–S) battery (QSSEB) based on a novel Li-argyrodite solid-state electrolyte (SSE), Super P–Sulfur cathode, and Li-anode. The cathode was prepared using a water-based carboxymethyl cellulose (CMC) solution and styrene butadiene rubber (SBR) as the binder while Li6PS5F0.5Cl0.5 SSE was synthesized using a solvent-based process, via the introduction of LiF into the argyrodite crystal structure, which enhances both the ionic conductivity and interface-stabilizing properties of the SSE. Ionic liquids (IL) were prepared using lithium bis(trifluoromethyl sulfonyl)imide (LiTFSI) as the salt, with pre-mixed pyrrolidinium bis(trifluoromethyl sulfonyl)imide (PYR) as solvent and 1,3-dioxolane (DOL) as diluent, and they were used to wet the SSE–electrode interfaces. The effect of IL dilution, the co-solvent amount, the LiTFSI concentration, the C rate at which the batteries are tested and the effect of the introduction of SSE in the cathode, were systematically studied and optimized to develop a QSSEB with higher capacity retention and cyclability. Interfacial reactions occurring at the cathode–SSE interface during cycling were also investigated using electrochemical impedance spectroscopy, cyclic voltammetry, and X-ray photoelectron spectroscopy supported by ab initio molecular dynamics simulations. This work offers a new insight into the intimate interfacial contacts between the SSE and carbon–sulfur cathodes, which are critical for improving the electrochemical performance of quasi-solid-state lithium–sulfur batteries.

25 ENERGY STORAGE↗

Spatial and thermal signatures of α and β relaxations in glassy and glacial aliphatic ionic liquids

The competition between Coulomb and van der Waals interactions brings forth unique dynamic features and broad applications to ionic liquids. Herein, we present a combined calorimetric, X-ray diffraction, incoherent elastic, and quasi-elastic neutron scattering study, over a wide temperature range (180–340 K), of the relaxational dynamics of the liquid, supercooled liquid, crystalline, glassy, and glacial states of two model ionic liquids: tributylmethylammonium (a good glass-former) and butyltrimethylammonium (a good crystal-former) cations and the bis(trifluoromethanesulfonyl)imide anion. In both systems, we observed two distinct relaxation processes. Finally, the Q-dependence of the respective relaxation time shows that the α-process is diffusive, while the β-process is modulated by the structure of the liquids.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Order-disorder in room-temperature ionic liquids probed via methyl quantum tunneling

Room-temperature ionic liquids are promising candidates for applications ranging from electrolytes for energy storage devices to lubricants for food and cellulose processing to compounds for pharmaceutics, biotransformation, and biopreservation. Due to the ion complexity, many room-temperature ionic liquids readily form amorphous phases upon cooling, even at modest rates. Here, we investigate two commonly studied imidazolium-based room-temperature ionic liquids, 1-ethyl-3-methylimidazolium tetrafluoroborate and 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, as well as their mixtures, to demonstrate how the complex interplay between the crystalline and amorphous phases is affected by the processing conditions, such as thermal history, liquid mixing, and applied pressure. We show that quantum tunneling in the cation methyl groups, measured by high-resolution inelastic neutron scattering, can be used to probe the order-disorder in room-temperature ionic liquids (crystalline vs amorphous state) that develops as a result of variable processing conditions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

In Situ Alloying Enabled by Active Liquid Metal Filler for Self‐Healing Composite Polymer Electrolytes

Abstract Solid inorganics, known for kinetically inhibiting polymer crystallization and enhancing ionic conductivity, have attracted significant attention in solid polymer electrolytes. However, current composite polymer electrolytes (CPEs) are still facing challenges in Li metal batteries, falling short of inhibiting severe dendritic growth and resulting in very limited cycling life. This study introduces Ga 62.5 In 21.5 Sn 16 (Galinstan) liquid metal (LM) as an active liquid alternative to conventional passive solid fillers, aiming at realizing self‐healing protection against dendrite problems. Compared to solid inorganics, for example silica, LM droplets could more significantly reduce polymer crystallinity and enhance Li‐ion conductivity due to their liquid nature, especially at temperatures below the polymer melting point. More importantly, LMs are unraveled as dynamic chemical traps, which are capable of blocking and consuming lithium dendrites upon contact via in situ alloying during battery operation and further inhibiting dendritic growth due to the lower deposition energy barrier of the formed Li‐LM alloy. As a proof of concept, by strategically designing an asymmetric CPE with the active LM filling, a solid‐state Li/LiFePO 4 battery achieves promising full‐cell functionality with notable rate performance and stable cycle life. This active filler‐mediated self‐healing approach could bring new insights into the battery design in versatile solid‐state systems.

Wu, Kai↗

A Simple AIMD Approach to Derive Atomic Charges for Condensed Phase Simulation of Ionic Liquids

The atomic charges for two ionic liquids (ILs), 1-n-butyl-3-methylimidazolium hexafluorophosphate ([BMIM] [PF6]) and 1-ethyl-3-methylimidazolium hexafluorophosphate ([EMIM][PF6]), were derived from periodic crystal phase calculations with density functional theory (DFT) and plane wave basis sets (denoted as "AIMD-c charge"). For both ILs, the total charge was found to be +/- 0.8 e for the cation and anion, respectively, due to the charge transfer between ions and polarization caused by the environment. These atomic charges were used in a force field developed within the general Amber force field framework. Using this force field, static, dynamic, and thermodynamic properties were computed for the two ILs using molecular dynamics simulation. The results were compared against results obtained using the same Amber force field but four different sets of partial charges, denoted as full charge, scaled charge, AIMD-1 charge, and AIMD-b charge, respectively. The full charge was derived from quantum chemistry calculation of isolated ions in a vacuum and resulted in a total charge of unity on each ion. The scaled charge was obtained by uniformly scaling the full charge by 0.8. AIMD-1 and AIMD-b charges were derived from liquid phase ab initio molecular dynamics simulations. The scaled charges have the same total charge on the ions as the AIMD-c charge but different distributions. It was found that simulation results not only depend on the total charge of each ion, but they are also sensitive to the charge distribution within an ion, especially for dynamic and thermodynamic properties. Overall, for the two ILs under study, the AIMD-c charge was found to predict experimental results better than the other four sets of charges, indicating that fitting charges from crystal phase DFT calculations, instead of extensive sampling of the liquid phase configurations, is a simple and reliable way to derive atomic charges for condensed phase ionic liquid simulations.

Zhang, Y↗

Interfacial Water Manipulation with Ionic Liquids for the Oxygen Reduction Reaction

The role that interfacial water plays in both promoting and inhibiting the electrochemical oxygen reduction reaction (ORR) remains somewhat unclear and controversial. Here, we use electroanalytical chemistry, spectroscopy, and microkinetic modeling to probe the impact of hydrophobic ionic liquid (IL) thin films on interfacial water structure and its role in promoting or inhibiting the ORR. Through the use of in situ ATR-SEIRAS, we find that the IL thin films limit the content of water at the interface and prevent the formation of hydrogen bond stabilized water organization. The impact of this exclusion of water on the promotion of the ORR is through the reduced coverage of OH ad spectator species. The decreased solvation of “active” OH ad species weakens its interaction with the catalyst surface, lowering the barrier to the last step in the ORR mechanism. This “destabilized” OH ad impact on ORR kinetics is confirmed through a microkinetic model. Furthermore, the results presented here highlight the mechanistic pathway through which hydrophobic ILs enhance ORR kinetics and point to pathways to both further improve this performance enhancement and the potential for integration of hydrophobic ILs into other technologically relevant elementary electrochemical reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, structural characterization and luminescence properties of 1-carboxymethyl-3-ethylimidazolium chloride

A microcrystalline carboxyl-functionalized imidazolium chloride, namely 1-carboxymethyl-3-ethylimidazolium chloride, C 7 H 11 N 2 O 2 + ·Cl – , has been synthesized and characterized by elemental analysis, attenuated total reflectance Fourier transform IR spectroscopy (ATR-FT-IR), single-crystal X-ray diffraction, thermal analysis (TGA/DSC), and photoluminescence spectroscopy. In the crystal structure, cations and anions are linked by C—H...Cl and C—H...O hydrogen bonds to create a helix along the [010] direction. Adjacent helical chains are further interconnected through O—H...Cl and C—H...O hydrogen bonds to form a (101¯) layer. Finally, neighboring layers are joined together via C—H...Cl contacts to generate a three-dimensional supramolecular architecture. Thermal analyses reveal that the compound melts at 449.7 K and is stable up to 560.0 K under a dynamic air atmosphere. Photoluminescence measurements show that the compound exhibits a blue fluorescence and a green phosphorescence associated with spin-allowed ( 1 π← 1 π*) and spin-forbidden ( 1 π← 3 π*) transitions, respectively. As a result, the average luminescence lifetime was determined to be 1.40 ns for the short-lived ( 1 π← 1 π*) transition and 105 ms for the long-lived ( 1 π← 3 π*) transition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystal growth under external electric fields

This is a review article concerning the crystal growth under external electric fields that has been studied in our lab for the past 10 years. An external field is applied electrostatically either through an electrically insulating phase or a direct injection of an electric current to the solid-interface-liquid. The former changes the chemical potential of both solid and liquid and controls the phase relationship while the latter modifies the transport and partitioning of ionic solutes in the oxide melt during crystallization and changes the solute distribution in the crystal.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

An experimental study on dehumidification and regeneration performance of a new nonporous membrane-based heat and mass exchanger using an ionic liquid desiccant

As a promising alternative to inefficient vapor-compression-based air conditioning, liquid desiccant dehumidification uses a liquid desiccant in contact with the humid air absorbing the moisture. However, it has not gained much market share due to the issues related to the carryover, corrosion, fouling, and crystallization of liquid desiccant. The research has developed a new membrane-based exchanger, which uses a non-corrosive ionic liquid desiccant and nonporous tubular membranes to address these issues. As the second generation of the prototype, the new exchanger was tested at various operating conditions. According to the experimental data, when it is used in the dehumidification loop, the new membrane-based exchanger achieves a specific vapor transportation rate of 778.6 g/(h–m 2 ) and an average water vapor flux of 0.316 g/(h-m 2 -Pa), which is a significant improvement compared with the previous designs using nonporous membranes. It also achieved a comparable or even better dehumidification performance compared with the dehumidifiers that use porous membrane and conventional liquid desiccants. However, the regeneration performance is not as good as its dehumidification. It is mainly caused by the high operating temperature required in the regeneration loop. The experimental data and findings provide first-hand experimental data and enhance the understanding of advanced membrane-based ionic liquid desiccant systems.

42 ENGINEERING↗

Modifying Interface Solvation and Oxygen Reduction Electrocatalysis with Hydrophobic Species

Ionic liquid interlayers improve the oxygen reduction reaction (ORR) kinetics on bulk and nanostructured catalysts for both Pt and alloyed-Pt materials. Despite the demonstrated performance enhancement at the half-cell and membrane electrode assembly level, the mechanism of the improvement is not fully understood. In this work, we combine single-crystal experiments with microkinetic modeling to uncover the origin of the ORR kinetic improvement on Pt(111) in the presence of ionic liquids and hydrophobic cations. With the incorporation of a modified Frumkin isotherm, our model accurately simulates the disorder–order transition observed in hydroxyl and bisulfate adsorption on Pt(111) under acidic conditions. Voltametric analysis shows that ionic liquids impact solvation to break so-called scaling relations between the adsorption strength of OH ad and O ad , but these effects have little impact on ORR activity. Instead, destabilized OH ad reduces the overall hydroxyl (spectator) coverage, resulting in higher availability of active sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Preparation of cerium halide solvate complexes

Crystals of a solvated cerium(III) halide solvate complex resulted from a process of forming a paste of a cerium(III) halide in an ionic liquid, adding a solvent to the paste, removing any undissolved solid, and then cooling the liquid phase. Diffusing a solvent vapor into the liquid phase also resulted in crystals of a solvated cerium(III) halide complex.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ionic-Liquid-Assisted Microwave Synthesis of Solid Solutions of Sr 1– x Ba x SnO 3 Perovskite for Photocatalytic Applications

Nanocrystalline Sr 1–x Ba x SnO 3 (x = 0, 0.2, 0.4, 0.8, 1) perovskite photocatalysts were prepared by microwave synthesis in an ionic liquid (IL) and subsequent heat-treatment. The influence of the Sr/Ba substitution on the structure, crystallization, morphology, and photocatalytic efficiency was investigated and the samples were fully characterized. On the basis of X-ray diffraction results, as the Ba content in the SrSnO 3 lattice increases, a symmetry increase was observed from the orthorhombic perovskite structure for SrSnO 3 to the cubic BaSnO 3 structure. The analysis of the sample morphology by SEM reveals that the Sr 1–x Ba x SnO 3 samples favor the formation of nanorods (500 nm–5 μm in diameter and several micrometers long). The photophysical properties were examined by UV/Vis diffuse reflectance spectroscopy. The band gap decreases from 3.85 to 3.19 eV with increasing Ba 2+ content. Furthermore, the photocatalytic properties were evaluated for the hydroxylation of terephthalic acid (TA). The order of the activities for TA hydroxylation was Sr 0.8 Ba 0.2 SnO 3 > SrSnO 3 > BaSnO 3 > Sr 0.6 Ba 0.4 SnO 3 > Sr 0.2 Ba 0.8 SnO 3 . Here, the highest photocatalytic activity was observed for Sr 0.8 Ba 0.2 SnO 3 , and this can be attributed to the synergistic impacts of the modification of the crystal structure and morphology, the relatively large surface area associated with the small crystallite size, and the suitable band gap and band-edge position.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Conductivity of PEO/PLA Doped Liquid Crystal Ionomer Solid Polymer Electrolyte in Mesomorphic Range

A novel polyethylene oxide (PEO)/polylactic acid (PLA) solid polymer electrolyte (SPE) doped with Liquid crystal ionomer (LCI) was prepared by automatic scraping membrane technology and the liquid crystal property of LCI was proposed as an effective strategy to improve the conductivity. The highest conductivity of the SPE with 0.5 wt% LCI achieve a value of 2.19 × 10{sup −4} S/cm at 17 °C which is approximately four orders of magnitude higher than that of the original PEO solid polymer electrolyte, conductivity at room temperature is 10{sup −7}–10{sup −8} S/cm. This is because the crystallinity is reduced by 25.3% compared to the pure PEO host. Differential Scanning Calorimetry (DSC) and polarizing microscope (POM) characterize the structure and properties of LCI. Electrochemical Impedance Spectroscopy (EIS) shows that the conductivity of the polymer electrolyte with 0.5 wt% LCI increased abruptly at 35 °C as the temperature is higher than T{sub g} of LCI, reaching 6.37 × 10{sup −4} S/cm which is 191% higher than that at 17 °C. There ionic conductivity has been improved extremely by continuous channel for efficient ion transportation, especially at the microtherm. And this change is greater at the elevated temperature regions, in line with the VTF equation. In summary, LCI’s liquid crystal performance can be used as an effective strategy to improve the low temperature conductivity of SPE.

36 MATERIALS SCIENCE↗

Counterion-Dependent Access to Low-Symmetry Lyotropic Sphere Packings of Ionic Surfactant Micelles

The water-driven self-assembly of homologous dianionic surfactants into lyotropic liquid crystals (LLCs) is investigated, with a focus on understanding how surfactant headgroup and counterion identities guide supramolecular spherical mesophase selection. Using temperature-dependent small-angle X-ray scattering (SAXS), we demonstrate that 2-alkylmalonate surfactants (CnMal-M2) with n = 8 (octyl) or 10 (decyl) and M = K + , Cs + , or (CH 3 ) 4 N + form both simple and complex micelle packings. Observed spherical morphologies include body-centered cubic (BCC), hexagonally closest-packed (HCP), and tetrahedrally closest-packed Frank–Kasper (FK) A15 and σ phases (Pm3(–)n and P4 2 /mnm symmetries, respectively). Previously observed in only one other minimally hydrated surfactant, the σ phase is a rare LLC morphology comprising a low-symmetry unit cell containing 30 sub-2-nm quasispherical micelles, each of which belongs to one of five symmetry-equivalent classes with discrete aggregation numbers. Temperature versus water concentration phase maps for C n Mal-M 2 LLCs reveal that σ-phase formation depends sensitively on the size and polarizability of the surfactant counterion and the length of the surfactant alkyl tail. Furthermore, these observations are rationalized in terms of a delicate interplay between global packing symmetry and local particle symmetry, and the extent to which counterion–headgroup correlations enforce the latter structures in these LLC phases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sandwiched Kagomé Lattices in a Coordination Polymer Based on Mixed-Valent Uranium

The metal–organic material U V O(U VI O 2 ) 2 (OH) 5 (Triaz) 2 (Triaz = 1,2,4-triazolate) has been isolated from the reaction of UO 2 (NO 3 ) 2 ·6H 2 O with 1,2,4-triazole in the ionic liquid 1-ethyl-3-methylimidazolium acetate ([C 2 mim][OAc]). The compound’s crystal structure is comprised of planar inorganic layers interconnected by organic linkers into a 3D framework. These layers represent a uranium-based coordination polymer with a Kagomé topology that to the best of our knowledge has never been recognized in f-element coordination chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Consequences of Convex Nanopore Chemistry on Confined Water Dynamics

A basic understanding of confined water is crucial for developing selective ion transport and water purification membranes, yet the roles of nanopore geometry and functionality on confined water dynamics remain unresolved. We discuss the synthesis of perdeuterated ionic alkylsulfonate amphiphiles and their water-induced self-assembly into lyotropic liquid crystal (LLC) mesophases with well-defined, convex, sulfonate-lined nanopores. Quasielastic neutron scattering (QENS) measurements demonstrate that the water self-diffusion coefficients within these sulfonate-lined convex nanopores depend on the hydration level and amphiphile counterion identity (H + , K + , NMe 4 + ). The consistency of the observed counterion-dependent water dynamics trends with those of carboxylate LLCs is rationalized on the basis of similarities in the counterion spatial distributions in the water-filled channels, which we deduce from electron density maps derived from small-angle X-ray scattering (SAXS) analyses. These findings indicate that water diffusion is systematically faster in sulfonate-lined nanopores as compared to carboxylate-lined pores due to weaker water interactions with the softer and more hydrophobic–SO 3 – functionalities. These molecular-level insights into the relationships between convex pore wall chemical functionalities, hydrated counterions, and confined water diffusion may inform future development of new nanoporous media.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ultrasound-assisted green synthesis of nanocrystalline Co{sub 3}O{sub 4} in the ionic liquid

Cobalt oxide Co{sub 3}O{sub 4} nanoparticles have been synthesized via sonochemical method in an ionic liquid, 1-Ethyl-3-methylimidazolium tetrafluoroborate [EMIM][BF4] for the first time. The crystal structure of Co{sub 3}O{sub 4} nanoparticles has been characterized by using powder X-ray diffraction (XRD). Morphology has been characterized by transmission electron microscopy (TEM). The optical properties were studied by UV-VIS Spectrometer.

36 MATERIALS SCIENCE↗

Optical response from terahertz to visible light of electronuclear transitions in LiYF 4 : Ho3 +

Because of its role as a model system with tunable quantum fluctuations and quenched disorder, and the desire for optical control and readout of its states, we have used high-resolution optical absorption spectroscopy to measure the crystal-field excitations for Ho 3+ ions in LiHo x Y 1-x F 4 from the terahertz to visible regimes. We show that many of the excitations yield very narrow lines visibly split even by the nuclear hyperfine interaction, making Ho 3+ in LiHo x Y 1-x F 4 a candidate host for optically addressable electronuclear qubits with quality factors as high as Q = 4.7 × 10 5 , where the higher-lying levels are electronic singlets. Optical transitions in the easily accessible near- and mid-infrared are narrow enough to allow readout of the ground-state electronuclear qubits responsible for the interesting magnetism of LiHo x Y 1-x F 4 . While many of the higher-lying states have been observed previously, we also report here detailed spectra of terahertz excitations. The strengths of the electric and magnetic dipole crystal-field transition lines of five of the lowest excited spin-orbit manifolds of dilute LiYF 4 : Ho 3+ were calculated and compared with measurement. Finally, the magnitude of the nuclear hyperfine coupling was used to assign the correct upper and lower states to transition lines.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗