Search NASA⌕ Search

SEARCH · Search NASA

Results for “jet algorithms”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Multiplicity dependence of charged-particle intra-jet properties in pp collisions at $\sqrt{s}$ = 13 TeV

The first measurement of the multiplicity dependence of intra-jet properties of leading charged-particle jets in proton–proton (pp) collisions is reported. The mean charged particle multiplicity and jet fragmentation distributions are measured in minimum-bias and high-multiplicity pp collisions at center-of-mass energy $\sqrt{s}$ = 13 TeV using the ALICE detector. Jets are reconstructed from charged particles produced in the midrapidity region (|η| < 0.9) using the sequential recombination anti-k T algorithm with jet resolution parameters R = 0.2, 0.3, and 0.4 for the trans verse momentum (p T ) interval 5–110 GeV/c. The high multiplicity events are selected by the forward V0 scintilla tor detectors. The mean charged-particle multiplicity inside the leading jet cone rises monotonically with increasing jet p T in qualitative agreement with previous measurements at lower energies. The distributions of jet fragmentation function variables z ch and ξ ch are measured for different jet-p T intervals. Jet-p T independent fragmentation of leading jets is observed for wider jets except at high- and low-z ch values. The observed “hump-backed plateau” structure in the ξ ch distribution indicates suppression of low-p T particles. In high-multiplicity events, an enhancement of the fragmen tation probability of low-z ch particles accompanied by a suppression of high-zch particles is observed compared to minimum-bias events. This behavior becomes more promi nent for low-p T jets with larger jet radius. The results are compared with predictions of QCD-inspired event generators, PYTHIA 8 with Monash 2013 tune and EPOS LHC. It is found that PYTHIA 8 qualitatively reproduces the jet modification in high-multiplicity events except at high jet p T . These measurements provide important constraints to models of jet fragmentation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

An Empirical Orthogonal Function-Based Algorithm for Estimating Terrestrial Latent Heat Flux from Eddy Covariance, Meteorological and Satellite Observations

Accurate estimation of latent heat flux (LE) based on remote sensing data is critical in characterizing terrestrial ecosystems and modeling land surface processes. Many LE products were released during the past few decades, but their quality might not meet the requirements in terms of data consistency and estimation accuracy. Merging multiple algorithms could be an effective way to improve the quality of existing LE products. In this paper, we present a data integration method based on modified empirical orthogonal function (EOF) analysis to integrate the Moderate Resolution Imaging Spectroradiometer (MODIS) LE product (MOD16) and the Priestley-Taylor LE algorithm of Jet Propulsion Laboratory (PT-JPL) estimate. Twenty-two eddy covariance (EC) sites with LE observation were chosen to evaluate our algorithm, showing that the proposed EOF fusion method was capable of integrating the two satellite data sets with improved consistency and reduced uncertainties. Further efforts were needed to evaluate and improve the proposed algorithm at larger spatial scales and time periods, and over different land cover types.

54 ENVIRONMENTAL SCIENCES↗

Low-latency Jet Tagging for HL-LHC Using Transformer Architectures

Transformers are the state-of-the-art model architectures and widely used in application areas of machine learning. However the performance of such architectures is less well explored in the ultra-low latency domains where deployment on FPGAs or ASICs is required. Such domains include the trigger and data acquisition systems of the LHC experiments. We present a transformer-based algorithm for jet tagging built with the HGQ2 framework, which is able to produce a model with heterogeneous bitwidths for fast inference on FPGAs, as required in the trigger systems at the LHC experiments. The bitwidths are acquired during training by minimizing the total bit operations as an additional parameter. By allowing a bitwidth of zero, the model is pruned in-situ during training. Using this quantization-aware approach, our algorithm achieves state-of-the-art performance while also retaining permutation invariance which is a key property for particle physics applications. Due to the strength of transformers in representation learning, our work also serves as a stepping stone for the development of a larger foundation model for trigger applications.

Laatu, Lauri [Imperial Coll., London]↗

First measurement of the cross section for top quark pair production with additional charm jets using dileptonic final states in pp collisions at $\sqrt{s}$= 13 TeV

The first measurement of the inclusive cross section for top quark pairs ($t\bar{t}$) produced in association with two additional charm jets is presented. The analysis uses the dileptonic final states of $t\bar{t}$ events produced in proton-proton collisions at a centre-of-mass energy of 13 TeV. The data correspond to an integrated luminosity of 41.5 fb -1 recorded by the CMS experiment at the LHC. A new charm jet identification algorithm provides input to a neural network that is trained to distinguish among $t\bar{t}$ events with two additional charm ($t\bar{t}c\bar{c}$), bottom ($t\bar{t}b\bar{b}$), and light-flavour or gluon ($t\bar{t}LL$) jets. By means of a template fitting procedure, the inclusive $t\bar{t}c\bar{c}$, $t\bar{t}b\bar{b}$, and $t\bar{t}LL$ cross sections are simultaneously measured, together with their ratios to the inclusive $t\bar{t}$ + two jets cross section. This provides measurements of the $t\bar{t}c\bar{c}$ and $t\bar{t}b\bar{b}$ cross sections of 10.1 ± 1.2 (stat) ± 1.4 (syst) pb and 4.54 ± 0.35 (stat) ± 0.56 (syst) pb, respectively, in the full phase space. The results are compared and found to be consistent with predictions from two different matrix element generators with next-to-leading order accuracy in quantum chromodynamics, interfaced with a parton shower simulation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurements of the differential jet cross section as a function of the jet mass in dijet events from proton-proton collisions at $ \sqrt{s}=13$ TeV

Measurements of the differential jet cross section are presented as a function of the jet mass in dijet events, in bins of jet transverse momentum, with and without a jet grooming algorithm. The data have been recorded by the CMS Collaboration in proton-proton collisions at the LHC at a center-of-mass energy of 13 TeV and correspond to an integrated luminosity of 2.3 fb$^{-1}$. The absolute cross sections show slightly different jet transverse momentum spectra in data and Monte Carlo event generators for the settings used. Removing this transverse momentum dependence, the normalized cross section for ungroomed jets is consistent with the prediction from Monte Carlo event generators for masses below 30% of the transverse momentum. The normalized cross section for groomed jets is measured with higher precision than the ungroomed cross section. Semi-analytical calculations of the jet mass beyond leading logarithmic accuracy are compared to data, as well as predictions at leading order and next-to-leading order, which include parton showering and hadronization. Overall, in the normalized cross section, the theoretical predictions agree with the measured cross sections within the uncertainties for masses from 10 to 30% of the jet transverse momentum.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of Inclusive Jet and Dijet Cross Sections in Proton-Proton Collisions at 7 TeV Centre-of-Mass Energy with the ATLAS Detector

CERN-LHC. Measurement of the inclusive and dijet cross sections in proton-proton collisions at a centre-of-mass energy of 7 TeV. The data sample has an integrated luminosity of 17 nb-1 and uses the anti-kt algorithm for jet identification, with cross sections given for two jet resolution parameters (R) of 0.4 and 0.6. The inclusive jet cross sections are presented as functions of the jet transverse momentum and rapidity and the dijet cross sections as functions of the dijet mass and the angular variable CHI, defined as exp(abs(y(jet1)-y(jet2))) where jet1 and jet2 are the leading (highest PT) jets.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Casimir meets Poisson: improved quark/gluon discrimination with counting observables

Charged track multiplicity is among the most powerful observables for discriminating quark- from gluon-initiated jets. Despite its utility, it is not infrared and collinear (IRC) safe, so perturbative calculations are limited to studying the energy evolution of multiplicity moments. While IRC-safe observables, like jet mass, are perturbatively calculable, their distributions often exhibit Casimir scaling, such that their quark/gluon discrimination power is limited by the ratio of quark to gluon color factors. In this paper, we introduce new IRC-safe counting observables whose discrimination performance exceeds that of jet mass and approaches that of track multiplicity. The key observation is that track multiplicity is approximately Poisson distributed, with more suppressed tails than the Sudakov peak structure from jet mass. By using an iterated version of the soft drop jet grooming algorithm, we can define a “soft drop multiplicity” which is Poisson distributed at leading-logarithmic accuracy. In addition, we calculate the next-to-leading-logarithmic corrections to this Poisson structure. If we allow the soft drop groomer to proceed to the end of the jet branching history, we can define a collinear-unsafe (but still infrared-safe) counting observable. Exploiting the universality of the collinear limit, we define generalized fragmentation functions to study the perturbative energy evolution of collinear-unsafe multiplicity.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Factorization and resummation for groomed multi-prong jet shapes

Observables which distinguish boosted topologies from QCD jets are playing an increasingly important role at the Large Hadron Collider (LHC). These observables are often used in conjunction with jet grooming algorithms, which reduce contamination from both theoretical and experimental sources. In this paper we derive factorization formulae for groomed multi-prong substructure observables, focusing in particular on the groomed D 2 observable, which is used to identify boosted hadronic decays of electroweak bosons at the LHC. Our factorization formulae allow systematically improvable calculations of the perturbative D 2 distribution and the resummation of logarithmically enhanced terms in all regions of phase space using renormalization group evolution. They include a novel factorization for the production of a soft subjet in the presence of a grooming algorithm, in which clustering effects enter directly into the hard matching. We use these factorization formulae to draw robust conclusions of experimental relevance regarding the universality of the D 2 distribution in both e+e- and pp collisions. In particular, we show that the only process dependence is carried by the relative quark vs. gluon jet fraction in the sample, no non-global logarithms from event-wide correlations are present in the distribution, hadronization corrections are controlled by the perturbative mass of the jet, and all global color correlations are completely removed by grooming, making groomed D 2 a theoretically clean QCD observable even in the LHC environment. Lastly, we compute all ingredients to one-loop accuracy, and present numerical results at next-to-leading logarithmic accuracy for e + e - collisions, comparing with parton shower Monte Carlo simulations. Results for pp collisions, as relevant for phenomenology at the LHC, are presented in a companion paper.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Fast b -tagging at the high-level trigger of the ATLAS experiment in LHC Run 3

The ATLAS experiment relies on real-time hadronic jet reconstruction and b-tagging to record fully hadronic events containing b-jets. These algorithms require track reconstruction, which is computationally expensive and could overwhelm the high-level-trigger farm, even at the reduced event rate that passes the ATLAS first stage hardware-based trigger. In LHC Run 3, ATLAS has mitigated these computational demands by introducing a fast neural-network-based b-tagger, which acts as a low-precision filter using input from hadronic jets and tracks. It runs after a hardware trigger and before the remaining high-level-trigger reconstruction. This design relies on the negligible cost of neural-network inference as compared to track reconstruction, and the cost reduction from limiting tracking to specific regions of the detector. In the case of Standard Model HH → bb̅bb̅, a key signature relying on b-jet triggers, the filter lowers the input rate to the remaining high-level trigger by a factor of five at the small cost of reducing the overall signal efficiency by roughly 2%.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Study of the top quark electric charge at the CDF experiment

We report on the measurement of the top quark electric charge using the jet charge tagging method on events containing a single lepton collected by the CDF II detector at Fermilab between February 2002 and February 2010 at the center-of-mass energy √s = 1.96 TeV. There are three main components to this measurement: determining the charge of the W (using the charge of the lepton), pairing the W with the b-jet to ensure that they are from the same top decay branch and finally determining the charge of the b-jet using the Jet Charge algorithm. We found, on a sample of 5.6 fb -1 of data, that the p-value under the standard model hypothesis is equal to 13.4%, while the p-value under the exotic model hypothesis is equal to 0.014%. Using the a priori criteria generally accepted by the CDF collaboration, we can say that the result is consistent with the standard model, while we exclude an exotic quark hypothesis with 95% confidence. Using the Bayesian approach, we obtain for the Bayes factor (2ln(BF)) a value of 19.6, that favors very strongly the SM hypothesis over the XM one. The presented method has the highest sensitivity to the top quark electric charge among the presented so far top quark charge analysis.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of the k t splitting scales in Z → ℓℓ events in pp collisions at $\sqrt{s}=8 $ TeV with the ATLAS detector

A measurement of the splitting scales occuring in the k t jet-clustering algorithm is presented for final states containing a Z boson. The measurement is done using 20.2 fb -1 of proton-proton collision data collected at a centre-of-mass energy of s=8 TeV by the ATLAS experiment at the LHC in 2012. The measurement is based on chargedparticle track information, which is measured with excellent precision in the p T region relevant for the transition between the perturbative and the non-perturbative regimes. The data distributions are corrected for detector effects, and are found to deviate from state-of-the-art predictions in various regions of the observables.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of the production of charm jets tagged with D 0 mesons in pp collisions at $\sqrt{\mathrm{s}}=7$ TeV

The production of charm jets in proton-proton collisions at a center-of-mass energy of $\sqrt{\mathrm{s}}=7$ TeV was measured with the ALICE detector at the CERN Large Hadron Collider. The measurement is based on a data sample corresponding to a total integrated luminosity of 6.23 nb -1 , collected using a minimum-bias trigger. Charm jets are identified by the presence of a D 0 meson among their constituents. The D 0 mesons are reconstructed from their hadronic decay D 0 → $K^-π^+$. The D 0 -meson tagged jets are reconstructed using tracks of charged particles (track-based jets) with the anti-$k$ T algorithm in the jet transverse momentum range 5 < p T , j e t c h 30 GeV/ c and pseudorapidity |$η$ jet | < 0.5. The fraction of charged jets containing a D 0 -meson increases with p T , j e t c h from 0.042 ± 0.004 (stat) ± 0.006 (syst) to 0.080 ± 0.009 (stat) ± 0.008 (syst). The distribution of D 0 -meson tagged jets as a function of the jet momentum fraction carried by the D 0 meson in the direction of the jet axis ( z &#x2225;<!-- ∥ --> c h ) is reported for two ranges of jet transverse momenta, 5 < p T , j e t c h < 15 GeV/ c and 15 < p T , j e t c h < 30 GeV/ c in the intervals 0.2 < z &#x2016; c h < 1.0 and 0.4 < z &#x2016; c h < 1.0 respectively. The data are compared with results from Monte Carlo event generators (PYTHIA 6, PYTHIA 8 and Herwig 7) and with a Next-to-Leading-Order perturbative Quantum Chromodynamics calculation, obtained with the POWHEG method and interfaced with PYTHIA 6 for the generation of the parton shower, fragmentation, hadronisation and underlying event.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Configuration, Performance, and Commissioning of the ATLAS b-jet Triggers for the 2022 and 2023 LHC data-taking periods

In 2022 and 2023, the Large Hadron Collider produced approximately two billion hadronic interactions each second from bunches of protons that collide at a rate of 40 MHz. The ATLAS trigger system is used to reduce this rate to a few kHz for recording. Selections based on hadronic jets, their energy, and event topology reduce the rate to 𝒪(10) kHz while maintaining high efficiencies for important signatures resulting in b-quarks, but to reach the desired recording rate of hundreds of Hz, additional real-time selections based on the identification of jets containing b-hadrons (b-jets) are employed to achieve low thresholds on the jet transverse momentum at the High-Level Trigger. The configuration, commissioning, and performance of the real-time ATLAS b-jet identification algorithms for the early LHC Run 3 collision data are presented. These recent developments provide substantial gains in signal efficiency for critical signatures; for the Standard Model production of Higgs boson pairs, a 50% improvement in selection efficiency is observed in final states with four b-quarks or two b-quarks and two hadronically decaying τ-leptons.

47 OTHER INSTRUMENTATION↗

Measurement of groomed event shape observables in deep-inelastic electron-proton scattering at HERA

The H1 Collaboration at HERA reports the first measurement of groomed event shape observables in deep inelastic electron-proton scattering (DIS) at $\sqrt{s} =319$ GeV, using data recorded between the years 2003 and 2007 with an integrated luminosity of 351 pb -1 . Event shapes provide incisive probes of perturbative and non-perturbative QCD. Grooming techniques have been used for jet measurements in hadronic collisions; this paper presents the first application of grooming to DIS data. The analysis is carried out in the Breit frame, utilizing the novel Centauro jet clustering algorithm that is designed for DIS event topologies. Events are required to have squared momentum-transfer $Q^2 > 150$ GeV 2 and inelasticity $0.2< y < 0.7$. We report measurements of the production cross section of groomed event 1-jettiness and groomed invariant mass for several choices of grooming parameter. Monte Carlo model calculations and analytic calculations based on Soft Collinear Effective Theory are compared to the measurements.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurements of the production cross-section for a Z boson in association with b - or c -jets in proton–proton collisions at $\sqrt{s} = 13$ TeV with the ATLAS detector

This paper presents a measurement of the production cross-section of a Z boson in association with b- or c-jets, in proton–proton collisions at $\sqrt{s} = 13$ TeV with the ATLAS experiment at the Large Hadron Collider using data corresponding to an integrated luminosity of 140 fb –1 . Inclusive and differential cross-sections are measured for events containing a Z boson decaying into electrons or muons and produced in association with at least one b-jet, at least one c-jet, or at least two b-jets with transverse momentum p T > 20 GeV and rapidity |y| < 2.5. Predictions from several Monte Carlo generators based on next-to-leading-order matrix elements interfaced with a parton-shower simulation, with different choices of flavour schemes for initial-state partons, are compared with the measured cross-sections. The results are also compared with novel predictions, based on infrared and collinear safe jet flavour dressing algorithms. Selected Z+≥ 1 c-jet observables, optimized for sensitivity to intrinsic-charm, are compared with benchmark models with different intrinsic-charm fractions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for low-mass dijet resonances using trigger-level jets with the ATLAS detector in p p collisions at sqrt(s)=13 TeV

Searches for dijet resonances with sub-TeV masses using the ATLAS detector at the Large Hadron Collider can be statistically limited by the bandwidth available to inclusive single-jet triggers, whose data-collection rates at low transverse momentum are much lower than the rate from Standard Model multijet production. This data refers to a search for dijet resonances using a strategy called "Trigger-object Level Analysis" (TLA) in ATLAS, where the limitation on high-rate events that can be used for the search is overcome by recording only the event information calculated by the jet trigger algorithms, thereby allowing much higher event rates with reduced storage needs.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Top Quark Pair in Association with an Extra Jet: Phenomenological Analysis at the Tevatron

The first measurement of the cross section of the top quark pair in association with an extra hard jet ($t\bar{t}$+jet) has been performed with 4.1 fb ₋1 of data collected at CDF. The measurement is an important test of perturbative QCD, as NLO effects play an important role in the calculation of the theoretical cross section. In addition, it is also important as a preview of the LHC, for which almost half of the top quark events will be produced with extra jets. Therefore, this process will be a substan- tial background for many new physics signals. The measurement is performed using SecVtx tagged events in the lepton plus jet channel. A data-driven approach is used to predict the background content, and a 2D likelihood is formed to simultaneously measure the $t\bar{t}$+jet and $t\bar{t}$ without extra jet cross sections. The measured result is σ $t\bar{t}$ +jet= 1.6±0.2 stat ±0.5 syst pb which is in agreement with the recent NLO SM predic- tion σ $t\bar{t}$+jet = $+0.16\atop{-3.31}$ pb . In order to elucidate the kinematic profile of the extra jet, an isolation algorithm has been developed. The algorithm has extracted correctly the extra jet out from the final state jets more than 60% of the time. This allowed for correcting the measured distributions of the extra jet for purity/efficiency in order to compare them with the MC distributions. The differences in the kinematic of the extra jet using different SecVtx requirements and different MC models (PYTHIA & MCFM) have been studied. The agreement between data and the simulations is reasonable. The fifth and the fourth highest ET jet in the final state of $t\bar{t}$+jet sample are found to be equally likely the extra jet.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗