Search NASA⌕ Search

SEARCH · Search NASA

Results for “light trapping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Quantum Simulation of Polarized Light-Induced Electron Transfer with a Trapped-Ion Qutrit System

Electron transfer within and between molecules is crucial in chemistry, biochemistry, and energy science. Here this study describes a quantum simulation method that explores the influence of light polarization on electron transfer between two molecules. By implementing precise and coherent control among the quantum states of trapped atomic ions, we can induce quantum dynamics that mimic the electron-transfer dynamics in molecules. We use three-level systems (qutrits), rather than traditional two-level systems (qubits), to enhance the simulation efficiency and realize high-fidelity simulations of electron-transfer dynamics. We treat the quantum interference between the electron coupling pathways from a donor with two degenerate excited states to an acceptor and analyze the transfer efficiency. We also examine the potential error sources that enter the quantum simulations. The trapped-ion systems have favorable scalings with system size compared to those of classical computers, promising access to richer electron-transfer simulations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Simulating the X-ARAPUCA, DUNE's next generation light sensors

The word arapuca refers to a bird trap built by the indigenous peoples of Brazil. On the other hand, our ARAPUCA is a photon trap for Noble Gases' scintillation light and it is the sensitive element upon which DUNE's whole photon detection system is based on. Here we present a glimpse of our state-of-the-art simulation of such device, the ArapucaSim, highlighting its philosophy and main components. As an application, we present here one of the studies being carried out, on the effects of light reflections inside the light guide and how affects the overall photon detection efficiency. Based on these results, we are able to not only acquire a better understanding of the device but also impose limits on the quality of the mechanical polishing of such surfaces. The ArapucaSim was developed with two main goals in mind: to assist in R&D by allowing short turnout times between new ideas and experimental tests, and to bridge the gap between high-precision time-consuming hardware simulations and the full-scale models for DUNE's Photon Detection System. This research also led to the development new algorithms for simulating wavelength shifting/scintillation processes and dichroic filters, which will be properly described in future publications.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2021

Franck-Condon Tuning of Optical Cycling Centers by Organic Functionalization

Laser induced electronic excitations that spontaneously emit photons and decay directly to the initial ground state (“optical cycling transitions”) are used in quantum information and precision measurement for state initialization and readout. To extend this primarily atomic technique to large, organic compounds, we theoretically investigate optical cycling of alkaline earth phenoxides and their functionalized derivatives. We find that optical cycle leakage due to wave function mismatch is low in these species, and can be further suppressed by using chemical substitution to boost the electron-withdrawing strength of the aromatic molecular ligand through resonance and induction effects. This provides a straightforward way to use chemical functional groups to construct optical cycling moieties for laser cooling, state preparation, and quantum measurement.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Laser spot welding of additive manufactured 304L stainless steel

Here, the goal of this work is to understand if an additively manufactured 304L stainless steel exhibits similar spot-welding behavior as wrought 304L stainless steel. Due to the many differences between an additively manufactured component and wrought product, it is important to determine how the material interacts with the laser and how it affects the weld bead morphology. In this paper, the laser coupling efficiency, weld size, and solidification of spot welds produced in wrought and additively manufactured 304L stainless steel were investigated. The coupling efficiency of wrought and additively manufactured 304L stainless steel of similar surface condition were approximately the same over a range of applied laser energies. Laser welding of the untreated (rougher) surface of additively manufactured 304L, however, showed improved coupling efficiency ranging between 3.3 and 100%. The rougher surface traps the incoming light and increases the coupling efficiency at lower laser energies, while at higher energy, the absorption efficiency is dominated by intrinsic absorption from the keyhole formation rather than surface roughness. The resulting spot weld microstructures differed from welds made in wrought 304L and additively manufactured 304L. Welds made in wrought 304L were fully austenitic containing what is suspected to be massive austenite, which suggests that these welds solidified as primary ferrite. Welds made in additively manufactured 304L were also fully austenitic and contained both cellular austenite and what is suspected to be massive austenite. These observations mean that welds made in additively manufactured 304L solidified as primary ferrite and primary austenite. The differences in weld microstructures made in wrought and AM 304L can be attributed to differences in the composition and solidification rate.

304L stainless steel↗
DOE OSTI2023

Micromotion-synchronized pulsed Doppler cooling of trapped ions

Here we propose and demonstrate a new method for Doppler cooling trapped-ion crystals where the distribution of micromotion amplitudes may be large and uneven. The technique uses pulses of Doppler cooling light synchronized with the trap RF that selectively target ions when their velocity is near a node, leading to more uniform cooling across a crystal by a single tone of cooling light. We lay out a theoretical framework that describes where this technique is practical, and provide a simple experimental demonstration.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Studying light–matter interactions and energy transfer at the nanoscale with a trapped–ion quantum computer

A grand challenge in materials sciences is to control energy transduction, transfer and dissipation at the nanoscale. Meeting this challenge requires progress in nanoscale fabrication and synthesis, but equally importantly, also progress in our understanding of how nanoscale structure influences these phenomena. Although detailed quantum mechanical models exist that capture the structure and physics of materials and molecular species, solving these models to calculate the relevant emergent phenomena, which often occur over vastly different time and energy scales, has so far proven difficult. In this project, we studied how to model energy transfer and light-matter interactions using trapped-ion quantum computers. Our studies focused on emulation of critical processes in natural systems, such as the well-known photosynthetic pigment-protein complexes responsible for capturing and transducing light to electrons. In addition, we implemented proof-of-principle experiments demonstrating that such calculations are possible on trapped-ion quantum computing hardware. These studies and experiments pave the way to investigate energy transport and transduction in a detail not accessible with classical computing technologies. We expect that our studies will allow to extract important guiding principles on how to improve the efficiency of nano-scale light-harvesting and transduction devices.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Optical Trapping of High-Aspect-Ratio NaYF Hexagonal Prisms for kHz-MHz Gravitational Wave Detectors

Here, we present experimental results on optical trapping of Yb-doped β-NaYF subwavelength-thickness high-aspect-ratio hexagonal prisms with a micron-scale radius. The prisms are trapped in vacuum using an optical standing wave, with the normal vector to their face oriented along the beam propagation direction, yielding much higher trapping frequencies than those typically achieved with microspheres of similar mass. This platelike geometry simultaneously enables trapping with low photon-recoil-heating, high mass, and high trap frequency, potentially leading to advances in high frequency gravitational wave searches in the Levitated Sensor Detector, currently under construction. The material used here has previously been shown to exhibit internal cooling via laser refrigeration when optically trapped and illuminated with light of suitable wavelength. Employing such laser refrigeration methods in the context of our work may enable higher trapping intensity and thus higher trap frequencies for gravitational wave searches approaching the several hundred kilohertz range.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Spin-trap isomers in deformed, odd-odd nuclei in the light rare-earth region near $N=98$

Masses of neutron-rich, odd-odd Pm, Eu, and Tb nuclei near N = 98 were measured using the Canadian Penning Trap mass spectrometer at the Californium Rare Isotope Breeder Upgrade (CARIBU) facility. High-resolution mass measurements yielded the discovery of spin-trap isomers at N = 97 in Tb 162 , and in the N = 99 isotones of Pm 160 and Tb 164 . Furthermore, no evidence of long-lived isomers were observed at N = 95 in Eu 158 , at N = 97 in Pm 158 , nor at N = 101 in Eu 164 and Tb 166 . Here, these experimental observations are compared to results from multiquasiparticle blocking calculations.

150 ≤ A ≤ 189↗
DOE OSTI2022

Internship Experience

I started my internship in January 2022 but the research on measuring dispersion and loss of 355nm light from a silicon oxide waveguide began in August 2022 which will be the focus of this paper. The motivation of this project is to determine whether it is possible to use pulsed 355nm light in an integrated waveguide within an ion trap chip. To begin this project, light from the 355nm Coherent Paladin laser was coupled into a fiber which will be referred to as the “source fiber.” After coupling into a fiber, loss and dispersion measurements could be performed as this fiber was used to deliver light to each of the experiments which will be covered in detail in the following paragraphs.

42 ENGINEERING↗
DOE OSTI2021

Spatial patterns of light-harvesting antenna complex arrangements tune the transfer-to-trap efficiency of excitons in purple bacteria.

In photosynthesis, the efficiency with which a photogenerated exciton reaches the reaction center is dictated by chromophore energies and the arrangement of chromophores in the supercomplex. Here, we explore the interplay between the arrangement of light-harvesting antennae and the efficiency of exciton transport in purple bacterial photosynthesis. Using a Miller-Abrahams-based exciton hopping model, we compare different arrangements of light-harvesting proteins on the intracytoplasmic membrane. We find that arrangements with aggregated LH1s have a higher efficiency than arrangements with randomly distributed LH1s in a wide range of physiological light fluences. This effect is robust to the introduction of defects on the intracytoplasmic membrane. Our result explains the absence of species with aggregated LH1 arrangements in low-light niches and the large increase seen in the expression of LH1 dimer complexes in high fluences. We suggest that the effect seen in our study is an adaptive strategy toward solar light fluence across different purple bacterial species.

Onizhuk, Mykyta↗
DOE OSTI2020

Dephasingless Laser Wakefield Acceleration

Laser wakefield accelerators (LWFAs) produce significantly high gradients enabling compact accelerators and radiation sources, but face design limitations, such as dephasing, occurring when trapped electrons outrun the accelerating phase of the wakefield. In this report we combine spherical aberration with a novel cylindrically symmetric echelon optic to spatiotemporally structure an ultra-short, high-intensity laser pulse that can overcome dephasing by propagating at any velocity over any distance. The ponderomotive force of the spatiotemporally shaped pulse can drive a wakefield with a phase velocity equal to the speed of light in vacuum, preventing trapped electrons from outrunning the wake. Simulations in the linear regime and scaling laws in the bubble regime illustrate that this dephasingless LWFA can accelerate electrons to high energies in much shorter distances than a traditional LWFA—a single 4.5 m stage can accelerate electrons to TeV energies without the need for guiding structures.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Operando Spectroscopic Analysis of Photovoltage Generation in Hematite Photoanodes

Solar-driven water splitting requires sufficient photovoltage to drive both water oxidation and proton reduction. Understanding the factors driving and limiting photovoltage generation is therefore crucial to optimizing photoelectrode design but has proven challenging to determine under operando conditions for photoanodes driving slow multiredox reactions such as water oxidation. In this work, operando optical spectroscopy is employed to measure the hole quasi-Fermi level (E F,p ) position in model hematite photoanodes as a function of applied bias and light intensity. The quasi-Fermi level splitting determined from these data are shown be in excellent agreement with the directly measured photovoltages, demonstrating the primarily electrochemical rather than primarily electrostatic origin of photovoltage in these photoelectrodes. E F,p pinning is observed at low light intensities and biases, indicative of hole trap states lying ∼0.2 eV above the valence band edge with a density of ∼1 nm −2 . Hole accumulation in these trap states is correlated with first order water oxidation. At higher light intensities and/or more anodic bias, E F,p becomes unpinned, assigned to saturation of these trap states, and correlated with the onset of third order water oxidation to molecular oxygen. Comparison with rate law analyses for other photoanodes indicates that such hole trap states may be a ubiquitous feature of metal oxides and suggests that materials processing strategies to suppress the density of such states would be a promising strategy to enhance photoanode performance.

Hematite↗
DOE OSTI2022

Effect of proton irradiation temperature on persistent photoconductivity in zinc oxide metal-semiconductor-metal ultraviolet photodetectors

The electrical and structural characteristics of 50-nm-thick zinc oxide (ZnO) metal-semiconductor-metal ultraviolet (UV) photodetectors subjected to proton irradiation at different temperatures are reported and compared. The devices were irradiated with 200 keV protons to a fluence of 1016 cm−2. Examination of the x-ray diffraction (XRD) rocking curves indicates a preferred (100) orientation prior to irradiation, with decrease in crystal quality afterward. Additionally, peak shifts in XRD and Raman spectra of the control sample relative to well-known theoretical positions are indicative of tensile strain in the as-deposited ZnO films. Shifts toward theoretical unstrained positions are observed in the irradiated films, which indicates partial relaxation. Raman spectra also indicate increase in oxygen vacancies (VO) and zinc interstitial defects (Zni) compared to the control sample. Additionally, transient photocurrent measurements performed on each sample at different temperatures showed up to 2× increase in photocurrent decay time constants for irradiated samples vs the control. This persistent photoconductive behavior is linked to the activation of electron and hole traps near the surface, and to the desorption and reabsorption of O2 molecules on the ZnO surface under the influence of UV light. Using an Arrhenius model, trap activation energies were extracted and, by comparing with known energies from the literature, the dominant defects contributing to persistent photoconductivity for each irradiation condition were identified. The persistence of differences in photocurrent transients between different samples months after irradiation indicates that the defects introduced by the suppression of thermally activated dynamic annealing processes have a long-term deleterious effect on device performance.

Heuser, Thomas A. (ORCID:0000000225642400)↗
DOE OSTI2022

Spectroscopic Investigation of Shallow Hole Traps in Ga- and B-doped Czochralski Silicon: Insight into Light-Induced Degradation

We report the minority carrier lifetime in B-doped Czochralski (Cz) Si declines upon carrier injection due to light-induced degradation (LID), which is attributed to the formation of a recombination-active boron-oxygen complex. Ga-doped Cz Si does not undergo LID. Previously, we showed that B-doped Cz Si undergoes a transition from paramagnetic to diamagnetic due to LID. Herein, we show that Ga-doped Cz Si remains paramagnetic upon carrier injection. This suggests that either the shallow hole traps that are formed in B-doped Cz Si are absent in Ga-doped Cz Si, or the negative-U centers in Ga-doped Cz Si do not transform into a recombination-active configuration, because the shallow acceptor trap state is shallower than the Ga acceptor level in the forbidden gap. In contrast to B-doped Cz Si, the defect signatures in Ga-doped Cz Si do not change upon light exposure, as detected by both electron paramagnetic resonance and deep-level transient spectroscopy.

14 SOLAR ENERGY↗
DOE OSTI2024

Measurements of Penning-Malmberg trap patch potentials and associated performance degradation

Antiprotons created by laser ionization of antihydrogen are observed to rapidly escape the ALPHA trap. Further, positron plasmas heat more quickly after the trap is illuminated by laser light for several hours. These phenomena can be caused by patch potentials—variations in the electrical potential along metal surfaces. A simple model of the effects of patch potentials explains the particle loss, and an experimental technique using trapped electrons is developed for measuring the electric field produced by the patch potentials. The model is validated by controlled experiments and simulations. Published by the American Physical Society 2024

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Direct Evidence of Visible Light-Induced Homolysis in Chlorobis(2,9-dimethyl-1,10-phenanthroline)copper(II)

Developments in the field of photoredox catalysis that leveraged the long-lived excited states of Ir(III) and Ru(II) photosensitizers to enable radical coupling processes paved the way for explorations of synthetic transformations that would otherwise remain unrealized. While first row transition metal photocatalysts have not been as extensively investigated, valuable synthetic transformations covering broad scopes of olefin functionalization have been recently reported featuring photoactivated chlorobis(phenanthroline) Cu(II) complexes. In this study, the photochemical processes underpinning the catalytic activity of [Cu(dmp) 2 Cl]Cl (dmp = 2,9-dimethyl-1,10-phenanthroline) were studied. The combined results from static spectroscopic measurements and conventional photochemistry, ultrafast transient absorption, and electron paramagnetic resonance spin trapping experiments strongly support blue light (λ ex = 427 or 470 nm)-induced Cu–Cl homolytic bond cleavage in [Cu(dmp) 2 Cl] + occurring in <100 fs. On the basis of electronic structure calculations, this bond-breaking photochemistry corresponds to the Cl → Cu(II) ligand-to-metal charge transfer transition, unmasking a Cu(I) species [Cu(dmp) 2 ] + and a Cl atom, thereby serving as a departure point for both Cu(I)- or Cu(II)-based photoredox transformations. No net photochemistry was observed through direct excitation of the ligand-field transitions in the red (λ ex = 785 or 800 nm), and all combined experiments indicated no evidence of Cu–Cl bond cleavage under these conditions. As a result, the underlying visible light-induced homolysis of a metal–ligand bond yielding a one-electron-reduced photosensitizer and a radical species may form the basis for novel transformations initiated by photoinduced homolysis featuring in situ-formed metal–substrate adducts utilizing first row transition metal complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Mutually guided light and particle beam propagation

The polarizability of atoms and molecules gives rise to optical forces that trap particles and a refractive index that guides light beams, potentially leading to a self-guided laser and particle beam propagation. In this paper, the mutual interactions between an expanding particle beam and a diffracting light beam are investigated using an axisymmetric particle-light coupled simulation. The nonlinear coupling between particles and photons is dependent on the particle beam radius, particle density, particle velocity and temperature, polarizability, light beam waist, light frequency (with respect to the resonance frequency), and light intensity. The computational results show that the maximum propagation distance is achieved when the waveguiding effect is optimized to single-mode operation. The application of the coupled beam propagation as a space propulsion system is discussed.

42 ENGINEERING↗