Search NASA⌕ Search

SEARCH · Search NASA

Results for “liquid sorbent”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

79 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

A Review on Direct Air Capture of Carbon Dioxide: Sorbent Materials, Process Engineering, Industrial Scale-Up, and Future Perspectives

The relentless accumulation of anthropogenic greenhouse gases has driven atmospheric carbon dioxide concentrations to approximately 426 ppm, necessitating the aggressive deployment of negative-emission technologies to achieve net zero by 2050. Direct air capture (DAC) offers a scalable, location-independent approach to atmospheric carbon removal; however, it is fundamentally constrained by the significant thermodynamic barriers associated with capturing CO 2 from ultradilute ambient conditions, requiring minimum thermodynamic energy inputs substantially higher than those for postcombustion point sources. This comprehensive review critically examines the technological landscape of DAC, focusing on the interdependent triad of sorbent material design, contactor engineering, and regeneration thermodynamics. We evaluate the fundamental boundaries of adsorption, emphasizing that an optimal adsorption enthalpy and isosteric heat of adsorption must balance the high CO 2 uptake capacity with the energetic penalties of sorbent regeneration. A systematic, comparative analysis of state-of-the-art sorbents is presented, encompassing mesoporous silicas, zeolites, carbon-based materials (CBMs), metal−organic frameworks (MOFs), porous organic polymers (POPs), and polymeric membranes. Special attention is devoted to surface functionalization strategies, particularly amine grafting and impregnation, which transition capture mechanisms from physisorption to chemisorption to enhance selectivity under ambient moisture and low partial pressures. Furthermore, we assess the operational merits of various reactor configurations, including gas−solid, gas−liquid, and membrane contactors, alongside regeneration cycles such as temperature, vacuum, pressure, and moisture swing adsorption. Finally, the review bridges fundamental materials science with industrial application by chronicling the scale-up milestones of pioneering entities and providing a strategic roadmap for advancing DAC technology readiness levels toward global deployment.

Adsorption↗
DOE OSTI2024

Comprehensive review of combustion ion chromatography for the analysis of total, adsorbable, and extractable organic fluorine

Poly‐ and perfluoroalkyl substances (PFAS) are a class of persistent organic pollutants whose high stability and appreciable water solubility have led to near‐global contamination. PFAS are bioaccumulative toxins that have been linked to a myriad of disorders and have been detected nearly universally in human blood. Liquid chromatography‐tandem mass spectrometry is the most frequent method used for quantitation, though this typically only measures a few dozen of the >14 000 known PFAS and has been shown to account for a small portion of the total organic fluorine present. Sum parameter methods such as total, extractable, and adsorbable organic fluorine have emerged as alternative measurements for PFAS determination. Combustion ion chromatography has become the preferred method for organofluorine measurement where the sorbent or extract containing PFAS is combusted and the emitted hydrofluoric acid (HF) is a measure of the cumulative organofluorine present. Herein we critically review the types of organofluorine measurement, their separation from the sample matrix, and key parameters of the analytical instrument that affect sensitivity, reproducibility, and recovery with regards to PFAS analysis.

Chemistry↗
NASA NTRS2006

The Planck Sorption Cooler: Using Metal Hydrides to Produce 20 K

The Jet Propulsion Laboratory has built and delivered two continuous closed cycle hydrogen Joule-Thomson (JT) cryocoolers for the ESA Planck mission, which will measure the anisotropy in the cosmic microwave background. The metal hydride compressor consists of six sorbent beds containing LaNi4.78Sn0.22 alloy and a low pressure storage bed of the same material. Each sorbent bed contains a separate gas-gap heat switch that couples or isolates the bed with radiators during the compressor operating cycle. ZrNiHx hydride is used in this heat switch. The Planck compressor produces hydrogen gas at a pressure of 48 Bar by heating the hydride to approx.450 K. This gas passes through a cryogenic cold end consisting of a tube-in-tube heat exchanger, three pre-cooling stages to bring the gas to nominally 52 K, a JT value to expand the gas into the two-phase regime at approx.20 K, and two liquid - vapor heat exchangers that must remove 190 and 646 mW of heat respectively.

hydrogen storage materials↗
NASA NTRS2009

Transient Modeling and Analysis of a Metabolic Heat-Regenerated Temperature Swing Adsorption (MTSA) System for a PLSS

A Metabolic heat-regenerated Temperature Swing Adsorption (MTSA) system is being developed for carbon dioxide, water and thermal control in a lunar and martian portable life support system (PLSS). A previous system analysis was performed to evaluate the impact of MTSA on PLSS design. That effort was Mars specific and assumed liquid carbon dioxide (LCO2) coolant made from martian resources. Transient effects were not considered but rather average conditions were used throughout the analysis. This effort takes into further consideration the transient effects inherent in the cycling MTSA system as well as assesses the use of water as coolant. Standard heat transfer, thermodynamic, and heat exchanger methods are presented to conduct the analysis. Assumptions and model verification are discussed. The tool was used to perform various system studies. Coolant selection was explored and takes into account different operational scenarios as the minimum bed temperature is driven by the sublimation temperature of the coolant (water being significantly higher than LCO2). From this, coolant mass is sized coupled with sorbent bed mass because MTSA adsorption performance decreases with increasing sublimation temperature. Reduction in heat exchanger performance and even removal of certain heat exchangers, like a recuperative one between the two sorbent beds, is also investigated. Finally, the coolant flow rate is varied over the cycle to determine if there is a more optimal means of cooling the bed from a mass perspective. Results of these studies and subsequent recommendations for system design are presented.

Iacomini, Christie↗
DOE OSTI2024

Ionic Pairs-Engineered Fluorinated Covalent Organic Frameworks Toward Direct Air Capture of CO 2

The covalent organic frameworks (COFs) possessing high crystallinity and capability to capture low-concentration CO 2 (400 ppm) from air are still underdeveloped. The challenge lies in simultaneously incorporating high-density active sites for CO 2 insertion and maintaining the ordered structure. Herein, a structure engineering approach is developed to afford an ionic pair-functionalized crystalline and stable fluorinated COF (F-COF) skeleton. The ordered structure of the F-COF is well maintained after the integration of abundant basic fluorinated alcoholate anions, as revealed by synchrotron X-ray scattering experiments. The breakthrough test demonstrates its attractive performance in capturing (400 ppm) CO 2 from gas mixtures via O$-$C bond formation, as indicated by the in situ spectroscopy and operando nuclear magnetic resonance spectroscopy using 13 C-labeled CO 2 sources. Both theoretical and experimental thermodynamic studies reveal the reaction enthalpy of ≈-40 kJ mol -1 between CO 2 and the COF scaffolds. This implies weaker interaction strength compared with state-of-the-art amine-derived sorbents, thus allowing complete CO 2 release with less energy input. The structure evolution study from synchrotron X-ray scattering and small-angle neutron scattering confirms the well-maintained crystalline patterns after CO 2 insertion. In conclusion, the as-developed proof-of-concept approach provides guidance on anchoring binding sites for direct air capture (DAC) of CO 2 in crystalline scaffolds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

New directions and principles for solvent extraction for recovery of lithium from aqueous brines and mineral leachates: A brief review

Increasing demand for lithium for manufacturing of batteries is fueling the unprecedented search for improved recovery and alternative sources. Wider source distribution, lower energy consumption, and greater sustainability make extraction of lithium from brines, both natural and process-derived, an attractive alternative to mineral ores. Solvent extraction, used industrially for production of metals, salts, and pharmaceuticals, has been investigated as a methodology for lithium recovery for several decades. However, industrial application of solvent extraction for lithium recovery has so far been limited. In contrast, direct lithium extraction using adsorbents based on inorganic minerals has rapidly advanced from research to commercialization. A comparison of solvent extraction processes to adsorption highlights these issues and explains the preference for adsorbents. Although the application of solvent extraction has been criticized for use of large amounts of acid, alkali, and organic solvents, steady progress has been made to improve its potential for industrial lithium production, spurred on generally by the advantages of solvent extraction in selectivity and throughput. Previously developed beta-diketone, organophosphate, and crown ether ligands are being adapted and improved. Their novel use with ionic liquids, deep eutectic solvents, and membrane technologies promises to expand capabilities for extraction of lithium from dilute aqueous sources while improving sustainability. Possibilities for further discovery and innovation abound. In this review, we provide a unique perspective from the field of solvent extraction starting with fundamentals such as ion-transfer theory and apply them to understanding lithium selectivity and extraction behavior. In conclusion, the results are cast in the light of the practical realities of developing economical solvent extraction processes.

Brine↗
DOE OSTI2026

CMPO-Functionalized Silica Sorbents for pH-Tunable Separation and Enrichment of Rare-Earth Elements from Environmental Matrices

Rare-earth elements (REEs) are crucial in many applications, yet mutual separation is challenging due to their similar chemical behavior. Octylphenyl- N,N-diisobutyl carbamoyl methyl phosphine oxide (CMPO) is an organophosphorus ligand originally developed for extracting actinides and lanthanides from spent nuclear fuel. Here, we report a pH-tunable CMPOfunctionalized silica sorbent for selective REE separation from complex aqueous matrices. A CMPO-associated silica gel sorbent was synthesized and characterized by Brunauer−Emmett−Teller (BET) surface area, scanning electron microscopy, and X-ray photoelectron spectroscopy to confirm the surface functionalization and binding behavior. Sorbent performance was evaluated by using a synthetic 46- element solution and a real phosphate rock fertilizer leachate. Notably, REEs were successfully eluted with ultrapure water, demonstrating reversible desorption controlled by pH adjustment. Packed-bed column studies increased the REE mass fraction from 3.6% to 64% (20-fold enrichment), with up to 30-fold enrichment of neodymium. The adsorption process follows the Langmuir isotherm behavior and follows pseudo-second-order kinetics. The uptake capacity of 1 μmol of REEs per 4.2 μmol of CMPO supports the formation of a predominantly 4:1 ligand:rare earth element(III) pseudocomplex. These results demonstrate CMPO-functionalized silica as a selective, water-elutable, and low-chemical-input platform for sustainable REE recovery from environmental and industrial sources.

chelating ligands↗