Search NASA⌕ Search

SEARCH · Search NASA

Results for “local horizons”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

Luna 24 - Mineral chemistry of 90-150 micron clasts

The mineralogy, composition and source relations of monomineralic clasts in the size range 0.09 to 0.15 mm have been studied for seven grain mounts from the Luna 24 core, obtained in Mare Crisium. One of the core horizons, which showed the greatest number of mafic mineral clasts, apparently represents a less reworked level or one which received a greater average influx of gabbroic and/or basaltic ejecta. Most of the mafic minerals in the core were probably derived from the comminution of clasts of very low titanium basalts and/or gabbros. A small number of mineral clasts may have originated from a Mg-rich gabbro. A mixture of local mare basalts and ejecta from Fahrenheit crater probably makes up most of the regolith at the Luna 24 site.

Meyer, H. O. A.↗
NASA NTRS2017

Overview of SLS Aeroacoustic Environment Development

The Space Launch System (SLS) ascent aeroacoustic environments provide the externally driven noise levels predicted for vehicle ascent during transonic and supersonic flight, and serve as an important input for component and secondary structure vibroacoustic design criteria. This aerodynamically induced noise is predominantly generated by unsteady flow within the local boundary layer due to free stream interaction with the outer mold line (OML). Additional sources are shear flow interactions, shocks, protuberance flows, and wake flows. This presentation provides an overview of the aeroacoustics discipline along with the SLS environment development process, including wind tunnel testing and general data reduction methods. The state of the discipline is also presented with a summary of aeroacoustic measurement and computational techniques currently on the horizon.

Steva, Thomas↗
NASA NTRS1976

Photometric studies of light scattering above the lunar terminator from Apollo solar corona photography

Excess brightness is found in 70-mm photographs of the solar corona above the lunar terminator during Apollo 15 and 17. Maximum brightness of this scattered light is determined from calibration of image density. The observed excess brightness displays circular symmetry above the lunar-horizon subsolar point, characteristic of forward diffraction scattering from micron or submicron size (solid) grains, and decays rapidly in intensity with altitude and distance from the lunar terminator. The observed brightness cannot be accounted for by a co-orbiting cloud of spacecraft contaminants, but requires a variable lunar dust 'atmosphere' over the terminator regions extending to altitudes in excess of 100 km. To maintain such large masses of lunar fines above the terminator requires either local mass-churning rates in excess of 2 by 10 to the -11th power g/sq cm sec or the assumption of some degree of high-altitude electrostatic suspension to increase the dwell time of individual grains at the altitudes observed. Such a model would reduce mass-churning rates while causing selective erosion/deposition and potential for escape of significant mass from the moon

Mccoy, J. E.↗
NASA NTRS2011

Gulf of Mexico Air Quality: CALIPSO Support for Gulf of Mexico Air Quality Relating to the Deepwater Horizon Oil Spill

On April 20, 2010, an oil platform belonging to BP exploded and leaked a huge volume of oil into the Gulf of Mexico. In an effort to control the spread of the oil, BP applied dispersants such as Corexit and conducted in-situ burnings of the oil. This catastrophe created a complex chain of events that affected not only the fragile water and land ecosystems, but the humans who breathe the air every day. Thousands of people were exposed to fumes associated with oil vapors from the spill, burning of the oil, and the toxic mixture of dispersants. While aiding in clean-up efforts, local fishermen were directly exposure to fumes when working on the Gulf. A notable amount of Gulf Coast residents were also exposed to the oil fumes as seasonal southeasterly winds blew vapors toward land. The Volatile Organic Compounds (VOC) found in oil vapors include: benzene, toluene, ethyl benzene, xylene, naphthalene, hydrogen sulfide and particulate matter (PM). Increases in water temperature and sunlight due to the summer season allow for these VOCs and PM to evaporate into the air more rapidly. Aside from the VOCs found in oil vapors, the dispersant being used to break up the oil is highly toxic and is thought to be even more toxic than the oil itself (EPA website, 2010). To protect human health, the environment, and to make informed policy decisions relevant to the spill, the EPA Region 6 has continuously monitored the affected areas carefully for levels of pollutants in the outdoor air that are associated with petroleum products and the burning of oil along the coast. In an effort to prevent, prepare for, and respond to future oil spills that occur in and around inland waters of the United States, the EPA has been working with local, state, and federal response partners. Air quality measurements were collected by the EPA at five active monitoring systems stationed along the coast.

Nguyen, Myngoc T.↗
NASA NTRS1991

Large scale lunar horizon glow and a high altitude lunar dust exosphere

All three Apollo 17 astronauts sketched a `lunar horizon glow', seen from orbit above the moon. It is shown that the shape of the glow is compatible with scattering of sunlight off of gas or dust at high altitudes above the moon. The present mathematical modeling best simulates the glow with submicron dust grains whose spatial density varies with altitude above the moon as exp(-H/H(s)), where H(s) is in the range of 5 to 20 km. These dust grains are probably electrically charged and ejected above the lunar surface by local electric fields.

Zook, Herbert A.↗
NASA NTRSDate not supplied

Future Arctic (Wild) Fires

Wildland fires in the boreal and Arctic are increasing in frequency and severity, with extreme fire seasons documented across the Pan-Arctic and boreal in five of the last seven years – including an early start to extreme fires in 2023.Human-caused and wildland fires above 60°N were larger sources of black carbon and methane than current modeled estimates of anthropogenic sectors like energy extraction and transportation. Further, these large boreal and Arctic fires have the potential to release large amounts of carbon dioxide and subsequent methane emissions from degraded permafrost and peat fires, as well as negatively impacting air quality thousands of miles south. By end of this century, current extreme fire years in the Arctic will likely be a normal fire year for much of Greenland, North America, Northern Europe, and Eurasia. As a new horizon in global wildland fire science, novel scientific pathways must be undertaken to improve our understanding and management of wildfires in the High Northern Latitudes – including understanding how NASA and U.S. researchers can enhance collaboration and develop near-real-time fire and smoke monitoring and modeling between North American and European ecology, fire, and climate scientists and stakeholders. Issues of inclusion, diversity, and equity are inherent to understanding fire ecology, impacts, and management in the Arctic and boreal, including centering and deferring to Indigenous and local communities when constructing best management practices.

Future↗
NASA NTRS1997

Chicxulub Impact Ejecta in Belize

Chicxulub ejecta deposits in Belize provide the closest exposures of ejecta to the crater and the only exposures of proximal ejecta deposited in a terrestrial environment. A quarry on Albion Island in northern Belize exposes Late Cretaceous, possibly Maastrichtian, carbonate platform sediments that were folded, eroded, and subaerially weathered prior to the deposition of coarse ejecta from Chicxulub. These ejecta deposits are composed of a basal, about 1-m-thick clay and dolomite Spheroid Bed overlain by a about 15-m-thick coarse Diamictite Bed. Many and perhaps most of the clay spheroids are altered glass. Many dolomite spheroids have concentric layers and angular cores are probably of accretionary lapilli origin. A slight Ir concentration (111-152 ppt) was detected in the base of the Spheroid Bed. The Diamictite Bed contains about 10% altered glass, rare shocked quartz, 3-8 m diameter boulders and striated and polished cobbles, one with a penetrating rock chip that plastically deformed the cobble. Ejecta deposits extend to the surface at Albion and the maximum thickness in this area is not known. Ejecta deposits are exposed in several roadside quarries in the Cayo District of central Belize. The Late Cretaceous here is also represented by carbonate platform sediments. The upper surface of the carbonate platform is a highly irregular and extensively recrystallized horizon possibly representing deep karst weathering. Approximately 30 in of diamictite overlies this horizon with a texture similar to the Diamictite Bed at the Albion quarry, but with a more diverse lithology. In three locations the Cayo diamictites, contain red clay layers with abundant polished and striated limestone pebbles and cobbles called Pook's Pebbles, several of which have penetrating rock chips and ablated surfaces. We interpret the Albion Spheroid Bed as a deposit from the impact vapor plume and the Albion and Cayo diamictites as the result of a turbulent flow that contained debris derived from the ejecta curtain and local scouring. The polished, striated, and ablated Pook's Pebbles are interpreted as high altitude ballistic ejecta.

Ocampo, A.↗
NASA NTRS2014

Preserved Flora and Organics in Impact Melt Breccias

At least seven glass-bearing strata of varying ages occur at different horizons in the Pampean sediments of Argentina dating back to the Miocene. In a strict sense, these impact glasses are melt-matrix breccias composed of partially digested minerals clasts and basement fragments indicative of crater excavation. Ar-40/Ar-39 dating yield ages (+/- 2 sigma) of 6 +/- 2 Ka, 114 +/- 26 Ka, 230 +/- 30 Ka, 445 +/- 21 Ka, 3.27 +/- 0.08 Ma (near Mar del Plata = MdP), 5.28 +/- 0.04 Ma, and 9.21 +/- 0.08 Ma (near Chasico = CH) Where found in place (not reworked), these ages are consistent with the local stratigraphy and faunal assemblages. A striking property of some of these impact glasses is the encapsulation of preserved fragments of floral (and even soft-tissue faunal remains). Here we identify retained organics and describe a likely process of encapsulation and preservation.

Schultz, P. H.↗
NASA NTRS2015

Benefits Assessment for Single-Airport Tactical Runway Configuration Management Tool (TRCM)

The System-Oriented Runway Management (SORM) concept was developed as part of the Airspace Systems Program (ASP) Concepts and Technology Development (CTD) Project, and is composed of two basic capabilities: Runway Configuration Management (RCM), and Combined Arrival/Departure Runway Scheduling (CADRS). RCM is the process of designating active runways, monitoring the active runway configuration for suitability given existing factors, and predicting future configuration changes; CADRS is the process of distributing arrivals and departures across active runways based on local airport and National Airspace System (NAS) goals. The central component in the SORM concept is a tool for taking into account all the various factors and producing a recommendation for what would be the optimal runway configuration, runway use strategy, and aircraft sequence, considering as many of the relevant factors required in making this type of decision, and user preferences, if feasible. Three separate tools were initially envisioned for this research area, corresponding to the time scale in which they would operate: Strategic RCM (SRCM), with a planning horizon on the order of several hours, Tactical RCM (TRCM), with a planning horizon on the order of 90 minutes, and CADRS, with a planning horizon on the order of 15-30 minutes[1]. Algorithm development was initiated in all three of these areas, but the most fully developed to date is the TRCM algorithm. Earlier studies took a high-level approach to benefits, estimating aggregate benefits across most of the major airports in the National Airspace Systems (NAS), for both RCM and CADRS [2]. Other studies estimated the benefit of RCM and CADRS using various methods of re-sequencing arrivals to reduce delays3,4, or better balancing of arrival fixes5,6. Additional studies looked at different methods for performing the optimization involved in selecting the best Runway Configuration Plan (RCP) to use7-10. Most of these previous studies were high-level or generic in nature (not focusing on specific airports), and benefits were aggregated for the entire NAS, with relatively low fidelity simulation of SORM functions and aircraft trajectories. For SORM research, a more detailed benefits assessment of RCM and CADRS for specific airports or metroplexes is needed.

Oseguera-Lohr, Rosa↗
NASA NTRS1977

Topography, structure, and mare ridges in southern Mare Imbrium and northern Oceanus Procellarum

The gross topography in southern Mare Imbrium and northern Oceanus Procellarum correlates with the buried structure and deposits of the Imbrium Basin and its rim, and many of the mare slopes may be depositional and reflect the pre-existing major features of the basin. Post-depositional, local distortion of the mare surface, however, is present and in many places associated with mare ridges. Many mare ridges are concentric to the Imbrium Basin suggesting that they are influenced by basin structures. Morphologic diversity of mare ridges suggests that not all have the same origin, and volcanic activity took place along some of them. Most mare ridges are associated with faults. The faults could be reverse and associated with a shrinking of the moon, however, some ridges parallel slopes and could be interpreted as decollement thrust faults along gliding horizons or as vertical faults caused by differential gravitational settling along lines that separate areas that are thinly flooded on topographic highs from areas that are thickly flooded in adjacent lows.

Lucchitta, B. K.↗
NASA NTRS1976

The use of LANDSAT DCS and imagery in reservoir management and operation

The author has identified the following significant results. A graph that shows the snow water equivalent data during the 1975-76 winter season for the Ninemile and Michaud Farms snow pillows located in northern Maine is shown. The Bournes transducers used in the snow pillow interface were tested after field use under controlled laboratory conditions of temperature and pressure. It was found that the temperature calibration curve for the Bournes transducers became erratic below 0 C. On 8-10 August 1976, the remainder of hurricane, Belle, travelled through Vermont, New Hampshire, northern Maine, and on into Canada's Maritime Provinces dumping three inches of rain in many areas. In Canada and Maine, local storms dropped up to two inches during the following week. The Saint John River reached near flood stages at Fort Kent, Maine. During this storm, DCP data were received from Fort Kent, Ninemile Bridge, and Saint Francis River in New Brunswick. Resulting high runoff after these storms was studied in connection with the proposed Dickey-Lincoln School dams to be built in that area, and significantly, it was found that creditable flood hydrographs could be generated from LANDSAT DCP data in spite of the voids caused by the satellite being below the horizon.

Cooper, S.↗
NASA NTRS1989

Refinement of Earth's gravity field with Topex GPS measurements

The NASA Ocean Topography Experiment satellite TOPEX will carry a microwave altimeter accurate to a few centimeters for the measurement of ocean height. The capability can be fully exploited only if TOPEX altitude can be independently determined to 15 cm or better. This in turn requires an accurate gravity model. The gravity will be tuned with selected nine 10-day arcs of laser ranging, which will be the baseline tracking data type, collected in the first six months of TOPEX flight. TOPEX will also carry onboard an experimental Global Positioning System (GPS) flight receiver capable of simultaneously observing six GPS satellites above its horizon to demonstrate the capability of GPS carrier phase and P-code pseudorange for precise determination of the TOPEX orbit. It was found that subdecimeter orbit accuracy can be achieved with a mere two-hour arc of GPS tracking data, provided that simultaneous measurements are also made at six of more ground tracking sites. The precision GPS data from TOPEX are also valuable for refining the gravity model. An efficient technique is presented for gravity tuning using GPS measurements. Unlike conventional global gravity tuning, this technique solves for far fewer gravity parameters in each filter run. These gravity parameters yield local gravity anomalies which can later be combined with the solutions over other parts of the earth to generate a global gravity map. No supercomputing power will be needed for such combining. The approaches used in this study are described and preliminary results of a covariance analysis presented.

Wu, Sien-Chong↗
NASA NTRS2002

Terrestrial Analogs to Wind-Related Features at the Viking and Pathfinder Landing Sites on Mars

Features in the Mojave Desert and Iceland provide insight into the characteristics and origin of Martian wind-related landforms seen by the Viking and Pathfinder landers. The terrestrial sites were chosen because they exhibit diverse wind features that are generally well understood. These features have morphologies comparable to those on Mars and include origins by deposition and erosion, with erosional processes modifying both soils and rocks. Duneforms and drifts are the most common depositional features seen at the Martian landing sites and indicate supplies of sand-sized particles blown by generally unidirectional winds. Erosional features include lag deposits, moat-like depressions around some rocks, and exhumed soil horizons. They indicate that wind can deflate at least some sediments and that this process is particularly effective where the wind interacts with rocks. The formation of ripples and wind tails involves a combination of depositional and erosional processes. Rock erosional features, or ventifacts, are recognized by their overall shapes, erosional flutes, and characteristic surface textures resulting from abrasion by windblown particles. The physics of saltation requires that particles in ripples and duneforms are predominantly sand-sized (60-2000 microns). The orientations of duneforms, wind tails, moats, and ventifacts are correlated with surface winds above particle threshold. Such winds are influenced by local topography and are correlated with winds at higher altitudes predicted by atmospheric models.

Greeley, Ronald↗
NASA NTRS1967

Television observations from Surveyor III

Surveyor III landed on the lunar surface at 00:04 GMT, on Day 110, 1967, approximately 23 hr after local sunrise on the Moon. The first pictures were taken by the television camera at 01:02 GMT. The camera was operated extensively for the first period of lunar visibility from the Goldstone Tracking Station of the Deep Space Network and, except on Day 115, on each successive Goldstone pass of the Moon until the Sun set over the Surveyor III landing site on Day 123. During this period, the Sun rose from an elevation angle of 11° in the east to within 3° of the zenith and then sank almost due west of the spacecraft. Many pictures were obtained of the illuminated eastern horizon in the period immediately preceding sunset. In addition to those received at the Goldstone Station, some were obtained at the Canberra, Australia, station of the Deep Space Network. There were 6315 television pictures taken during the first lunar day of the Surveyor III mission.

Surveyor III spacecraft↗
NASA NTRS2005

A Dynamic Fountain Model for Lunar Dust

During the Apollo era of exploration it was discovered that sunlight was scattered at the terminators giving rise to horizon glow and streamers above the lunar surface. This was observed from the dark side of the Moon during sunset and sunrise by both surface landers and astronauts in orbit. These observations were quite unexpected, as the Moon was thought to be a pristine environment with a negligible atmosphere or exosphere. Subsequent investigations have shown that the sunlight was most likely scattered by electrostatically charged dust grains originating from the surface. It has since been demonstrated that this dust population could have serious implications for astronomical observations from the lunar surface. The lunar surface is electrostatically charged by the Moon s large-scale interaction with the local plasma environment and the photoemission of electrons due to solar ultra-violet (UV) light and X-rays. The like-charged surface and dust grains then act to repel each other, such that under certain conditions the dust grains are lifted above the surface. We present a dynamic fountain model which can explain how sub-micron dust is able to reach altitudes of up to approximately 100 km above the lunar surface. Previous static dust levitation models are most applicable to the heavier micron-sized grains in close proximity proximity to the surface, but they cannot explain the presence of extremely light grains at high altitudes. If we relax the static constraint applied to previous models, and instead assume that the grains are in constant motion (under the action of dynamic forces), a new picture emerges for the behavior of sub-micron lunar dust.

Stubbs, T. J.↗
NASA NTRS1989

The Flin Flon paleosol and the composition of the atmosphere 1.8 BYBP

Within the 1800 to 1900 my old Flin Flon-Snow Lake greenstone belt, Amisk Group volcanics are overlain by Missi Group fluvial sediments. Several localities along the Missi-Amisk contact, the volcanics show evidence of subaerial weathering. Field relationships, mineralogical evidence, and chemical analyses confirm that this alteration zone is a paleosol. Pedogenic fabrics and mineralogy were somewhat obscured by greenschist-grade metamorphism associated with the Hudsonian orogeny (1750 my). This is especially true in the upper meter of the paleosol, where metamorphic paragonite and sericitic micas developed in a crenulated fabric. This metamorphism did not, however, obliterate the imprint of weathering on the Amisk volcanics. Features characteristic of well-drained modern soils are evident in the paleosol. Corestones of spheroidally weathered pillow lavas occur at depth within the paleosol (Cr horizon). The corestones decrease in size upward and eventually disappear into a hematite-rich horizon at the top of the paleosol. These macroscopic changes are accompanied by a decrease in CaO and MgO and by an increase in Al2O3, TiO2, and total iron toward the paleosol-Missi contact. Ferrous iron decreases upward toward the contact; FeO was apparently oxidized to ferric iron and retained within the paleosol during weathering. The oxidation and retention of iron within the Flin Flon paleosol indicates that PO2 was probably > or = 10(-2) P.A.L. at the time of weathering. The behavior of iron in the Flin Flon paleosol contrasts sharply with its behavior in the 2200 my Hekpoort paleosol, which is strongly depleted in iron. This difference suggests that a significant increase in the ratio of PO2/PCO2 in the atmosphere took place between 2200 and 1800 mybp.

Non-NASA Center↗
NASA NTRS1991

The timing of alkali metasomatism in paleosols

We have measured the concentrations of rubidium and strontium and 87Sr/86Sr values of whole-rock samples from three paleosols of different ages. The oldest of the three weathering horizons, the 2,760 Ma Mt. Roe #1 paleosol in the Fortescue Group of Western Australia, experienced addition of Rb, and probably Sr, at 2,168 +/- 10 Ma. The intermediate paleosol, developed on the Hekpoort Basalt in South Africa, is estimated to have formed at 2,200 Ma, and yields a Rb-Sr isochron age of 1,925 +/- 32 Ma. The youngest of the three paleosols, developed on the Ongeluk basalt in Griqualand West, South Africa ca. 1,900 Ma, yielded a Rb-Sr age of 1,257 +/- 11 Ma. The Rb-Sr systematics of all three paleosols were reset during post-weathering metasomatism related to local or regional thermal disturbances. The Rb-Sr systematics of the paleosols were not subsequently disturbed. The near-complete removal of the alkali and alkaline earth elements from these paleosols during weathering made them particularly susceptible to resetting of their Rb-Sr systematics. Paleosols of this type are therefore sensitive indicators of the timing of thermal disturbances.

NASA Discipline Number 52-20↗
NASA NTRS2017

Detection, Localization, and Tracking of Unauthorized UAS and Jammers

Small unmanned aircraft systems (UASs) are expected to take major roles in future smart cities, for example, by delivering goods and merchandise, potentially serving as mobile hot spots for broadband wireless access, and maintaining surveillance and security. Although they can be used for the betterment of the society, they can also be used by malicious entities to conduct physical and cyber attacks to infrastructure, private/public property, and people. Even for legitimate use-cases of small UASs, air traffic management (ATM) for UASs becomes of critical importance for maintaining safe and collusion-free operation. Therefore, various ways to detect, track, and interdict potentially unauthorized drones carries critical importance for surveillance and ATM applications. In this paper, we will review techniques that rely on ambient radio frequency signals (emitted from UASs), radars, acoustic sensors, and computer vision techniques for detection of malicious UASs. We will present some early experimental and simulation results on radar-based range estimation of UASs, and receding horizon tracking of UASs. Subsequently, we will overview common techniques that are considered for interdiction of UASs.

surveillance↗